I want to copy 4 columns and one cell to different sheet. I have 'Main' sheet and 'Report' , 'Report(1), 'Report(2), 'Report(3)' and so on. In this 'Report', I'd like to copy column A,E,F, and J and paste to column B, C, D, and E in the 'Main' sheet. I also copy Cell C3 in 'Report' sheet and paste in column A. The cell C3 is ID.
I need to check every 'Report' sheet for copying and put these records into 'Main' sheet.
The first row in 'Report' is 6 The first row in Main is 4
I'm in the middle of building a code that will look at the value in Sheet: "DATA" column "J", for each row that matches a criteria that I pull from a cell - Sheet: "Test" Cell: "C1".
The number of rows varies. I want to paste columns: "I2, K2:P2, U2:AJ2" when the value in Sheet: "DATA" column "J" matches the cell "C1". I'm using a Command button to click every time I want to generate the filtered data. And I would prefer the code to always copy data starting at Sheet: "Test" Cell: "K2".
I've copied, below, my test code that I have so far which only copies row 2 from the Sheet: "Data", and copies it into Sheet: "Test", starting at K2.
Private Sub CommandButton2_Click() If Sheets("DATA").Range("J2").Value = Sheets("Test").Cells(1, 3) Then Sheets("DATA").Range("I2,K2:P2,U2:AJ2").Copy Sheets("Test").Cells(2, 11).PasteSpecial Paste:=xlValues, Operation:=xlNone End If End Sub
I've been tackling this data capture/paste issue for a week or so. I found the string below which does provide a good foundation for my challenge. But, my basic level of understanding macros limits my modifications to meet my needs.
I have 20 worksheets in my master file corresponding to Excel files individual associates will update weekly. After the associates have updated their individual files for the week, I want to capture the data entered and paste values into a master file containing a worksheet for each associate (sharing the same name as the individual associate file). All of these files are housed on team SharePoint sites.
I need a macro to perform several steps after clicking a "Run Update" macro button in the master file: Open individual associate fileIn master file, search for each Initiative listed in column B (starting cell B3) in the individual associate file (in column B starting at cell B11)If Initiative is found in individual associate file, copy adjacent data in columns D:J for the respective rowIn master file, paste values to the corresponding Initiative row for the corresponding week's worth of dataIf Initiative is not found in the individual associate file, move to the next Initiative listed in the master fileRepeat these steps for each individual associate file
Linking would be the easiest way to accomplish this if I wanted to have a multitude of weekly individual files for the associates. However, I'd rather each associate have one file for them to update (basically overwriting their previous week's entries).
I need to ensure the paste values corresponds to the appropriate day of the week. In simpler terms, if the date in the individual associate file in cell D9 reads Oct 1, 2012, the data captured from that row needs to be pasted to the corresponding row/column in the master file that reads the same date.
I am trying to copy one worksheet using the "move/copy" function that is available when you right click a tab name and want to copy the worksheet in the same workbook
The steps I'm using are:
1. Right click the tab name 2. Select Move or Copy, 3. Select Create a Copy 4. Click OK
Doing all of the above does not work. When the new worksheet opens, all columns are the same width. It seems to be stuck on "autofit column width" setting of 8.5. The original worksheet is several columns wide all with different width settings.
I've also used Copy, Paste Special and selected column widths and that does not work either.
What I am trying to do is to write a macro that will automatically copy six columns from worksheet (Sheet 1) to another worksheet (Sheet 2). i.e. ‘Description of Project’, ‘WBS Code’, ‘Rate’, ‘Employee Name’, ‘Premium’, ‘Invoice’, ‘Status’, ‘Total Cumulative Hours’, ‘Total Cumulative Amount’ from Worksheet (from Sheet 1 to Sheet 2)
The problem arises as I know the names of the columns to be copied in Sheet 1 (as details above) but they can be in any order in sheet 1.
In additional the columns ‘Total Cumulative Hours’, ‘Total Cumulative Amount’ are total columns so when they are copied from ‘Sheet 1’ to ‘Sheet 2’ their values should be copied as opposed to the formulas
I have a worksheet with data in columns AW to columns QZ. I want to be able to copy a range of columns into another worksheet. The Columns AW to QZ have the same headings repeated every 10 columns. e.g. English, Maths, Science, Art & Design, Humanities, PSHE, History, ICT, RE and Attendance. Each block represents a different time period.
I want to be able to copy all the columns headed one subject (e.g. English) into another workbook. I used the following code to open the worksheet and paste the data into it, but there are so many columns for the 10 subjects that the code is too big to run so I need to shorten it and i don't know how to.
Sheets("On Roll Data & Levels").Select Range("AF2:AF99").Select 'KS2 English column Application.CutCopyMode = False
I currently have created a database (sheet two) with information including ID # (VH-XXXXX) in Column A and all the necessary information related to that unique Item. What I would like to do is search based on the ID number, have it filter, then copy and paste the row into another worksheet. Is this possible? I am relatively new to VBA and have written codes for copy and pasting rows, but never with an autofulter.
I am looking for VBA code that will select a data validation cell, copy the selection, and paste the value of that cell in a different worksheet.
The data validation list is in cell L47. The user will select a date from cell D31, type a description of activities in the adjacent column and then select initials from the aforementioned validation list in cell L47. I need the code to fit into a button I created so that when they click it to approve the activity, the code will copy the value of the initials and paste it into column AB in a separate worksheet. Column AB runs parallel to column A, which contains all of the dates located on Sheet1 in cell D31. I think I might need some sort of loop to run this so that it pastes initials on the correct date.
I want to run a macro that looks thru column F of all my worksheets (in my entire workbook).
If it finds an x then I want it to copy that entire row and paste it into a worksheet called "old" or a new worksheet or a new document in word (it doesn't matter - just whatever is easiest for my little brain to understand).
I should end up with about 40 rows of data in the new sheet. (I have some code that looks thru it all and colors the cell blue but I just don't know how to get it to copy and paste the entire row into a new worksheet.)
tried making changes in the following code so as to copy paste only those cells which has any value.but could not succeed according to the following even if there is no value a cell from a particular sheet it still gives a bullet.
to clear it more. if there are 3 sheets having information then only 3 bullets with information should appear.
Dim strTemp As String Dim shtTemp As Worksheet Dim rngX As Range Dim lngIndex As Long
For lngIndex = 5 To 10 Set shtTemp = ActiveWorkbook.Worksheets("Day" & lngIndex) For Each rngX In shtTemp.Range("A1").Cells strTemp = strTemp & Chr(149) & Chr(32) & rngX.Value & vbLf Next Next Range("Sheet1!E5") = Left(strTemp, Len(strTemp) - 1)
I am unable to copy and paste on a particular worksheet. It is not protected nor are the cells locked. I can copy one or more cell's contents, but as soon as I click into the cell I wish to copy to, the paste icon greys out. Using VBA code to do the same fails at the same point.
Finding the value "OK" in a range of data in Worksheet(1) out of Range("Product"). Ones the value "OK" is found, the entire row is cut and then pasted into a new worksheet 'Range("A3")'. Then the loop sets in and finds the next value "OK" in the range untill it reaches the end of the predetermined Range("Product").
The only problem I have is that the code I have written already performs the process, but when pasting the data into the new worksheet, paste's all of the found rows into the same row. So what you are left with in the new pasting sheet (Worksheet2), is only the last found row because it keeps overiding previously found data. What I need the Macro to do is find the next availible blank row in Worksheet2 and for all values cut out of Worksheet1. Now there was a simular posting to this on the forum, but when I tried it in my code it would not work...
Sub FindAndPaste1() With Worksheets(1).Range("Product") Set c = .Find("OK", LookIn:=xlValues) If Not c Is Nothing Then firstAddress = c.Address Do c.EntireRow.Cut Destination:=Worksheets("Sheet2").Range("A3") Set c = .FindNext(c) Loop While Not c Is Nothing And c.Address <> firstAddress End If End With End Sub
I also attach the Excel spreadsheet called Product Macro.xls
attached is the template that im working on right now. the worksheet which is named as "1" has a command button when clicked on it would create another worksheet named as "2", now i need to collate the information in to a master sheet which i have named as "daily report". All im in need is to copy data from every worksheet and post the same in the daily report using a Macro code.
iam able to do the same using the following for one row (1.1 to 1.5) of values which repeats only once for the first worksheet and doesnt repeat next time for worksheet 2 and so on. I want to have the values for 1 to 10 in the daily report. Can someone help me?[/color]
I am a complete amature at Marco's and formulas. I have been trying to create what i need but i am unable to get it to work. I have a worksheet named "Course dates incl. pursuit" which has a table which runs from B7 to J144 in the table it has date, number, name, location, job, area, notifified, on system and passed?. in that order. I want if the passed column which is in J if that has a Y in it to copy and paste into another worksheet on the next avaliable line, worksheet name "Master."I would like it in a slightly different order if that is possible they have the same titles on the table but would like it to go number, name, location, job, area and date. Running from B5 to G(end of spreadsheet). That is the main part i would also like to to copy and paste into another worksheet if the answer is "N" but the above part is the most important part. Due to the computer settings i am unable to attach it
In sheet Model RC BOM I am trying to copy all the rows under Level 1 (row 3), including level 1, until it reaches the next Level 1 (row 537) (not including row 537), and paste those cells in next tab (BIW) starting at row 2. The next operation is to copy all rows under Level 1 (row 537), including level 1, until it reaches the next Level (row 827), not including row 537, and paste those cells in the next tab (Chassis) starting at row 2.
The challenge is that I cannot use the row numbering in sheet Model RC BOM as a reference for coding because the content will change every week.
I would like to disable cut/copy/paste and maybe delete inside a worksheet. Reading earlier threads on this subject provided the code to put in the ThisWorkbook module, where it works great for all my worksheets. However, there is one worksheet where it is necessary to have copy/paste, either with control c or right click/copy. Here is part of that code provided by Tom Urtis:
Private Sub Workbook_Activate() Application.CutCopyMode = False Application.OnKey "^c", "" Application.CellDragAndDrop = False End Sub
What do I replace Application with to work on just the worksheet level?
I have a workbook that contains budgets for as many as 50 divisions. I don't always know what the names of the divisions are going to be. I need a macro that will go through each worksheet and copy aa1:ao200 and paste it to a worksheet named "upload" in the next available row.
Here is something that i found here but i cant make it work.
Sub Macro4() ' Macro4 Macro For Each ws In ActiveWorkbook.Worksheets With ws Range("AA1:AO200").Select Selection.Copy If Application.WorksheetFunction.CountA("B:B") = 0 Then
I have a perplexing problem. I created code to copy a worksheet that has the correct page setup and then copy/paste special to get just the values, not the formulas from the master sheet. It works standalone - the copied worksheet after doing the paste/special just has the data along with the master sheet's original page setup. When I include the code within a For Each... loop, it only copies the worksheet and I get the formulas. What is different between the two approaches that would cause the loop code to not do the paste/special values?
Here i am attaching the excel sheet where macro is enabled. I have added macros in last spread sheet (Consolidated) everything is working fine. Whats messing is i have copied a macro for the entire workbook, which will disable Copy/Pase/Cut option to all engineers. But problem is its disabled for me as well, every time i have to delete the code for copy/cut options. I just want cut/copy option in the last worksheet (Consolidated) where i can get all the result with out touching the rest of the sheets.
I am using the following macro which copy and paste certain info from one sheet to another. The macro I am using is
Code: Sub test() With Sheets("Invoice") .Range("A4:C17").Copy Sheets("Transactions").Range("b" & Rows.Count).End(xlUp).Offset(1).PasteSpecial Paste:=xlPasteValues End With End Sub
Is it possible to copy the value of B2 in the sheet (Invoice) as well and paste it for as many entries there are in the rows 4:17 in the sheet "Transactions". For example say i have items in row 4:10 when it copies the info to the sheet Transactions then it must copy the entry that is in B2 on sheet Invoice also in column a 4:10.