Excel 2010 :: Message Box Request When Cell Is Completed And New Line Added?
Mar 27, 2014
Warrantee.xlsx
I attached the sheet that I am trying to get up and running, there is two things I need to do, but cant get it working as I intend to.
Sheet 1 - When the invoice number is fulled in in cell F8 a message box must pop up requesting the hyperlink to the invoice saved on a share folder, but for now on the desktop, when the file is selected it (the hyperlink) must be returned to cell G8, then once the last cell (I8) has been completed, the line 8 must be locked so that it can't be editted again without a default password and a new line must be added below line 8 for processing, I tried recording the macro, but it only works on one line, and on the message box request, I truly am not up to speed yet, this I can't get up and running.
i have 5000+ addresses with no punctuation in them, just seperated by line breaks. i need to be able to add a delimiter (semi-colon, colon, full stop, any will do) to the end of every line of the address, not the cell; in order to extract the info using 'Text To Columns' in Excel 2010
I have a spread sheet with product codes on and 5 different prices types but they have only pulled through 4 times so need to insert a 5th line for each product code
This seems easy in theory but it's above my head. I have written code to add text and numbers from a userform to certain cells on a worksheet. Now, is it possible to display a message box after the code executes to acknowledge the code has executed successfully? I have tried simply adding the Msgbox function at the end of the code but that does not work.
I have a macro which refreshes a query when the spreadsheet is opened. This works fine when online.
However, if the user is not online, the query is unable to refresh and the macro just hangs.
Is there a code which will enable me to say " if unable to refresh then move on to the next line"?
here's the code below.
Private Sub Workbook_Open() Sheets("Houselist").Activate Selection.QueryTable.Refresh BackgroundQuery:=False Sheets("Front").Select Range("A1").Select End Sub
Below is some code that I found on the internet some while ago. When Excel opens this code runs which brings up a message box prompting a user to select an option. If no option is selected within 15 seconds then the macro runs, else it depends on the selection entered.
The problem that I am experiencing is that sometimes when the user does not select an option the macro does not execute after the coded 15 seconds. The message box just sticks around until a selection is made.
Most of the time it works just fine... some of the time it doesn't. The problem would appear to have gotten worse since upgrading to Excel 2010.
So, my question is either:
1. Why the code does not execute as expected each time Excel is opened? 2. Is there a better / more robust way of executing the below code without using "shell"?
I want to a horizontal line in a chart. There are only two figures with me. One I want to display as a column chart. The other as a horizontal line chart. (I can use both excel 2003 or 2010, whichever is suitable)
I have been trying to chart temperature differences over 10 day's time for six cities using a line graph. For some reason, the lines are all clustered at the bottom of my graph, with values of 0. My spreadsheet is accurate, without any blank cells. I'm using Excel 2010.
I would like to be able to add a line (a trend line) to a clustered column chart. The attached jpg (picture copied from Excel Charts - Easy Excel Tutorial) shows the general structure, with the red (poorly) hand drawn lines representing what I want to add to the chart.
If using Excel's Trend line functionality is not an option, I have already calculated the trend points adequately, so have the data to add as an additional series or combine with an existing series. (using Excel 2010)
I use 2010 and I will try and I need to complete a relatively simple project that I am working on.
I have a range of cells, "D7:Q30". This range has numerical values that are updated automatically (every cell within the range has a numerical value) from an "old value" to a "new value". The refresh rate is not constant, that is the values may change at any time depending on when a value changes I think it is called "pushed" data. Once a value is updated ("new value"), it stays at that value until one of the updates changes its value (and then it becomes the "old value").
I would like a message box to display the following EACH TIME A CELL CHANGES ITS VALUE when the NEW updated value is LESS THAN the OLD value:
"B51, B52, **5, has a changed value from "old value" to "new value".
The ** above in the message box represents the following: If for example cell F23 changes, ** in the message box should be the value that is in cell F5. If Q10 changes, the ** value in the message box should be Q5. It will always be the value in Row5 but have a different column depending on where the change is detected.
B51 is the text value in B51..same for B52 (text) etc...these values change depending on what spreadsheet I have open, but will always be in those cell positions. But the values within the range D7:Q30 are always numeric.
I have been given a task to create a line graph who has 10 categories and each category has 5 different values. I need to plot a line graph, so that those 10 categories should appear on the Y-axis instead of X-axis.
I have four cells c1 thru c4. The SUM of these cells must equal 1. I want to display an error message "sum of cells not equal to 1.0" but only when data has been entered in all four cells.
For instance =SUM(C1:C4, "<>1") should display the error message. Is there a way to write the formula with an IF statement and still use data validation with error message box?
Assumptions: -Will ignore blanks -Error message "Sum of cells are not equal to 1.0" until values in all four cells have been entered, not after a value is entered in a cell. (validate expression after all four cells have values or blank)
Scenarios: c1 = .25, c2 is blank, c3 = .25, c4 = .50 TRUE no error message should displays c1 = .25, c2 = .25, c3 = .25, c4 = .50 TRUE no error message should displays c1 = .25, c2 = .30, c3 = .25, c4 = .50 FALSE error message should display after value is entered in c4 etc
What I don't want is for the error message box to display after .25 is entered in c1 because the user is still in the process of adding values. Can this be done using Data Validation in Excel 2010?
I'm working on a workbook for tracking debt. It has 15 sheets. Instructions, Charts (for showing debt change over time), "Invisible" (this is where my chart data is, I plan to hide it), and 12 month sheets. On the Invisible sheet, for example, I have my data set up. I'm pulling the data from other sheets. In the screenshot, I'm using =Month12!P48 as the formula to pull my data from the other sheets. But, the user hasn't entered data yet for month 12, so the line chart drops to zero there. I want it to just stop and do nothing, until there is data in that cell. (I would prefer to use a line chart vs a scatter chart for this, but I have the same problem in both)
I have XYZ Coordinates for a continuous 3-D line that has numerous segments. I want to input a distance along that line, and have it create the XYZ coordinates at that point. See Image for reference.
Row 2 is my start point - I input the initial coordinates here - this point is the origin of the 3-D line Column B is where I want the calculated Y value to go for each point Column C is where I want the calculated X value to go Column D is where I want the calculated Z Value to go Column E is the how far along the 3-D line that the (to be calculated) point should be at. (MD1) Columns G, H, & I are given to me, and I use this data to generate the coordinates in Columns J, K, & L Column O is the cumulative length of the line at that coordinate. (MD2)
Basically, I had planned on writing a formula to:
Find the coordinates of the point who's MD2 (column O) is before the desired point's MD1 (column E)Find the coordinates of the point who's MD2 (column O) is after the desired point's MD1 (column E)Subtract MD's (column O) to get the length of the segmentFind the distance along that segment that MD1 (column E) fallsUse that distance to traverse along that line to the desired point.
Why when I drag the dotted blue page break line does it sometimes break the entire doc into one page per cell ?
The doc is not wide. When I first load I can drag the break line successfully. Then I print preview... select print on both sides... boom.. goes from 4 pages to 14. Then I go back to page break view... drag the line... boom... Hundreds of pages. Even if I revert back to printing on one side it still is messed up.
How do I make this stop?? What am I doing wrong?? Office 2010
I'm trying to create a macro that will look at each worksheet in a workbook and then delete the last line of data on each worksheet. The last row can vary on each worksheet. This is what I have come up with but it is not working. I am on Excel 2010 and Windows 7.
I have created an Excel spreadsheet in 2007. When a friend opens the workbook in Excel 2013, It does not let him add data to the cells. ( just one column which is the "date" column) The worksheet is not locked or protected.
When I right-click on the column and goto format cells, protection, the box is ticked, but the note says this doesn't take effect unless the sheet is protected witch it isnt.
I am trying to create a 100% stacked column which has a superimposed line chart over the top of it.
Basically % of yes and no for two separate datasets, but which share the same characteristics. The x-axis is months of the year.
CSP Yes CSPNo All Yes All No
Apr-13 6 19
[code]....
I can create 2 separate charts. One for the yes/no of one set as a 100% stacked column. I then use 'no fill' on the No column to stop this from being seen.
I can create a 100% line chart for the second data type, and 'no fill' the 100% line that appears.
However, I can't merge the two charts to show the Yes % for one dataset as bars and the Yes % of the other as a line.
I am looking for a creative way to display a pie chart within a data point marker of a line chart.
My database has 3 value columns, Type1, Type2 and the Total (Type1 + Type2) these are recorded per day (Date, in Column A)
I have a line chart that displays the total by date, but I want to find a way to display the percentage split of a particular day by type.
I was thinking to load the chart image into the Data point marker, but i don't think that is the best way as the data is updated daily and I would have to do it each day for a few line charts.
The other way I was thinking about was to have a generic Pie chat in the Line chart (Maybe in a corner) and the pie would update depending on way date series was selected or Mouseover'd)
the way that I am approaching it at the movement (Not the best way and by far not the coolest way. Is to have a list of all the dates in a column next to the Line chart and using some VBA, what ever date is selected in the column the pie chart displays the corresponding data. But eh challenge is that when there is alot of dates, I am going to be scrolling up and down.
I am using Excel 2010, but I cant not use the slicer's as the other users do not have 2010, they have 2007.
I am using a excel macro to send message from excel and i have the code to send the mail, but the body of the mail is coming in a single line but i need to send it in different lines, how to do that.
I have created a message box and I want leave two blank lines in the middle of the text. Is this possible?
At the moment my code for the message box line looks like:
Msg = "This process will print each site for " & UserSlection & ". Before continuing please ensure you have the right printer selected. (I.E. a colour printer where available). The process may take several minutes to complete. Do you wish to continue?"
I just want to move the "Do you wish to continue?" down two lines so that it is easier to read.
I am maintaining a spreadsheet to enter all my sales orders. I need a code which automatically moves the entire row to a new sheet "Completed" when the order status is selected as "Completed".
I've got a password protected spreadsheet with only certain cells unlocked to allow users to complete them. I need the following to work on Excel versions 2003, 2007 & 2010.
Cell E3 has a drop down list with types of car to choose from. One of the car types is "Pool_Car".
Cell D12 should only be used if "Pool_Car" is selected from the drop down list. If any other car type is selected, and the user tries to enter a figure in D12, I need an error message to appear.
E3 & D12 are unlocked cells.
I'm happy for D12 to become locked & only allow it to be unlocked if "pool_car" is selected, but I've looked elsewhere, but can't find VBA or data validation to work.
