I have a data series plotted as columns. Then I want a horizontal line at $5,000 to appear all the way across the chart. It appears from the 1st to the last data point, but there is blank space before the first point and after the last point. I would like the red line to extend into this blank space before and after, so that it is going across the entire chart.
I tried playing around with different axis settings and no luck.
I have a line Chart and want to create a static horizontal/indicator line.
I cannot create a new series to plot this horizontal line as I'm using an external data source (OLAP cube) as source data for the chart.
I am using the the stock chart and I would like there to be a horizontal line across the chart with a y-axis of the opening price. In the end I want this to be in VBA but how to do this manually I should be able to put it in loop of data that will produce many charts with a horizontal line starting at the day opening.
I have tried to add a new series to the chart but I'm using the Candle stick stock chart and the new series comes out as a vertical not horizontal line. I read about using a secondary horizontal axis but all the tutorials I find are in Excel 2003 and they donlt line up well with Excel 2007.
I found this link on charts with horizontal lines but again they are in 2003 and I'm using a candle stick stock chart not a scatter chart. [URL]
I want to a horizontal line in a chart. There are only two figures with me. One I want to display as a column chart. The other as a horizontal line chart. (I can use both excel 2003 or 2010, whichever is suitable)
View 2 Replies View RelatedI am trying to overlay a line chart on top of a stacked column chart. The stacked column chart is a chart where the x axis is dates and the y axis is amount. The line chart is a projected amount that I will reach in few years; the x axis is the date while the y axis is an amount. I can get a chart that has a line and stacked columns, but ever time, the dates get messed up. The line has an extremely wide date range while the columns only have about a month of data.
View 9 Replies View RelatedIn the attached file I have the data which shows me the market size in value, my market share in value & I did a calculation to get the percentage. What I need is a chart that shows me the market size in column graph, my market share in line graph and I want the percentages to be showing also.
View 3 Replies View RelatedWe have a lot of charts we want to create in Excel 2007. We have templates created that seem to work. (But also sometime seem to not.)
After the charts are created that are placed in their own chart pages/sheets. The problem I'm having is that the x axis title doesn't seem to be centered horizontally wrt the x axis of the plot area. (It does look centered wrt the chart area.)
Some code or an algorithm to control he placement of the x axis title and maybe center it?
I got the following table and it generates a random number either 1 or 0 (win or loss)
trade win/loss Account value
0 10,000
rand() 1 0 9,800
rand() 2 1 11,000
rand() 3 1 12,000
rand() 4 0 11,500
Each time I press F9, the Account value changes because the win/loss is generated randomly. Assuming, I press F9 100 times, how do I create a scatter plot chart with a best line fit for all the account values. I know how to create the scatter plot but how do I save all the values everytime I press F9.
Here's a sample of a chart that I want; However, I want the bar chart to be a stack chart as I have multiple "Failure modes" per month that I want to show the number(or count) of failures per month. Then I want the line chart to remain the Complaint Rate for that month.
I just can't seem to figure it out.
This chart pulls from a data set that looks something like this: ....
I would like to be able to add a line (a trend line) to a clustered column chart. The attached jpg (picture copied from Excel Charts - Easy Excel Tutorial) shows the general structure, with the red (poorly) hand drawn lines representing what I want to add to the chart.
If using Excel's Trend line functionality is not an option, I have already calculated the trend points adequately, so have the data to add as an additional series or combine with an existing series. (using Excel 2010)
Im plotting data on a Line-Column 2 Axes Chart which works really well with 4 data series (2 column, 2 Line) but when adding a fifth data series, the fourth disappears from view. I can see its still there cos I can display the values but I cant get the line to appear. The values for the 5th series are also similar to other series values so its not like the chart cant display it....are there limits to the number of series on such a chart?
View 9 Replies View RelatedCurrently we have data that is plotted to a scatter plot along with an already defined line. Next, with a straight edge we attempt to draw a line parallel to the already defined line through the scatter points of data. We basically find two points that give us the best fit to the original line. What I attempted to do was calcualte the slope of the original line and then the slope of each combination of two points in the data set. I then subtracted the slopes, found the minimum difference and thought that would give me the line most parallel to the original. This doesn't seem to work. I'm at a loss, any advice?
View 8 Replies View RelatedI follows Andy Pope Methods to make average line,
Q.1 To make the line span across plot area continue…
I can not find solution, trying different options.
Please let me know how to do it?
Q.2 Question related to Average
If value is zero the, how to make average excluding zero by excel functions.
I want to show 8 members of staff's names, with their sales closing percentages. I want then to produce a chart showing their percentages as a column with a line showing 16% going across the chart showing who is above and who is below the target.
Ideally i would also like to change the colour of the columns or background of those below the line to show who is under target.
I have some weekly data that I need to produce a graph from (100% Stacked Column). Each time I create the graph using the dates as the x axis i only get a thin line which looks like it represents one day, the other space looks like it is for the other 6 days of the week. I know that you could add an apostrophe to the beginning of the date but this is to be an automated report.
View 9 Replies View RelatedI have a set of data which indicates readings taken at different dates/times at varying intervals.
I want to create a chart where time is the X-axis but the usual charting feature would spread the data points at regular intervals. I want the data is spread out across the X-axis according to the actual timings.
I have a sample data in the file attached to this posting. There I showed the type of chart I want to see (which I achieved only by modifying the original set, Table 1. The modified set of data is in Table 2)
how to achieve this with the original table of data, Table 1.
I am trying to figure out the best way to plot this data -- For each region, I want to plot December 2006 snowfall against December 2007 snowfall. So starting on row 12 to row 41 (in the attached file). First challenge: the dates are not aligned because it is using the retail calendar where 12/3/2006 is compared against 12/2/2007. How can I plot the snow depth for the Northeast for example? I can't just use a dual axis chart because there are also dual dates...
View 3 Replies View RelatedI would like to create a chart in vba which contains 2 sets of data, both using the same x axis. The first must be a line graph, the second a staggered bar chart. This must be represented on one chart with data labels. Also, how do I change the colour of the plots?
View 5 Replies View RelatedI have a 46000 rows of data. I want to make a chart, but only want to plot the highest and lowest data points in the data set. How do I get Excel to automatically find and plot only the highest and lowest data points?
View 9 Replies View RelatedI am trying to set up a bar chart that will not plot values where I have left the cell blank so that I don't have to keep resizing the source data / sorting the data whenever I add more data.
I have tried putting NA() as the value as you would for scatter plots
I have also tried leaving the category cell blank
Neither of these seem to work. I have attached an example.
one of my excel reports, i am using a dsum formula and plotting a chart against it. i do not want to show the zeros on the graph, is there anyway i can do that, i could not find anything in the tools -> options.
View 2 Replies View RelatedI have a chart updating on a weekly basis
a) can i select a whole range without the chart picking up any blank cells or zeros, if so then a lot of my other question will be redundant
b) I only want to show 4 weeks at a time, so when a new column of data is added on, how do i get VBA to shift the range accross 1 to the right e.g.
week 36 37 38 39
Shift to
week 37 38 39 40
I have a large amount of data recorded from a logging device which i then need to convert to a graph. Is there some nice coding to enable the user to select a range of dates from column A and times from column B then allow the user to select the column in which relevant data is contained and plot a line graph of the data contained with named axes.
View 9 Replies View RelatedI have 2 columns og data, for example
120
120
120
120
220
220
220
220
320
320
320
320
420
420
420
420
I want to plot them via a chart. But here is the problem..
My code.....................
I maintain data which gets updated every week. I have a chart associated with this data which I want to get updated automatically. I tried to use dynamic range on the chart and it kinda works. But the issue with my data is that I have data set in a row, followed by a blank cell which is then followed by average of last two weeks. Hence, when I use a dynamic range, it also displays the last value in the row (average), which I don't want to display in my chart.
So what I am looking forward to do is set up dynamic range or any other solution, which automatically updates my chart with weekly sales data without showing the average value in the chart. I have attached sample worksheet here.
im having problem formatting my graph.
chart type = line.
I have 1 series of data, which is N values vs. Time.
Time however, is specified by specific dates. The graph is not putting a plot point accorrding to the date corresponding to the N value.
Example values:
date:____1/1/05 _______ 5/7/05 _____ 8/13/05
n value: __55 ___________ 22 _________ 11
I want the chart to reflect the time between the dates and put a plot point (n value) under each date listed and connect with a line.
how can i plot multiple series of values in one graph after checking some check boxes, which i have previously done, randomly?
View 4 Replies View RelatedFor Excel 2000:
In worksheet A, there is a column of numbers that can be 0 or not zero.
In worksheet B, there is a column of cells that determines if a corresponding cell in worksheet A is zero or not.
'As an example, for cell 'B!C6
=If( 'A!B52=0,"",'A!B52)
The column in worksheet B is used in a chart.
The chart settings are:
Tools | Options | Chart | Active Chart- Plot empty cells as: Not plotted
The chart is not treating "" as EMPTY, and therefore is not presenting correctly.
How would I set the value of cell 'B!C6 to EMPTY (or null, or blank, or whatever Excel calls it) using an IF statement, such that 'B!C6 would evaluate to EMPTY, and be ignored by the chart?
Would this be any different in Excel 2003?
I have plenty of experience with VBA outside of charts so that's where I need assistance. I need to get SeriesCollection(4), the PTAI series, to appear on the area chart second from the bottom instead of on the top.
The order for the non-line series should be, from top to bottom:
SeriesCollection(3) - Non-Mission AC ( Training, T&E, AMarc series)
SeriesCollection(2) - Total Pipeline series
SeriesCollection(4) - PTAI series
SeriesCollection(1) - Available PMAI series
Here's the
Sub MakeSandChart()
Dim ChartSource As Range
Dim ChartName As String
Dim ChartSheet As String
Dim yCount As Integer
Dim PAA_Value As Integer
Application. ScreenUpdating = False
passtype = Mid(ActiveSheet.Name, 5, 1)
Set ws = Worksheets(ActiveSheet.Name)
ChartName = Left(ActiveSheet.Name, 5)
ChartSheet = ChartName & " Chart"
ChartName = "F18" & passtype
Set ChartSource = Union(Range("SummRowDate" & passtype), _
Range("SummRowTAI" & passtype), _
Range("SummRowNM" & passtype), _
Range("SummRowTotPipe" & passtype), _
Range("SummRowPTAI" & passtype), _
Range("SummRowPMAI" & passtype), _
Range("SummRowPlanPAA" & passtype), _
Range("SummRowWorkPAA" & passtype), _
Range("SummRowDrillPAA" & passtype), _
Range("SummRowBaseline" & passtype))
Worksheets(ChartSheet).Activate
I wanted to ask if you know any charting software which can give weight to elements on a chart when two or more variables overlap? Ideally the color intensity of, say, circles should increase from pale blue to vivid blue depending on the number of the data items which are operlapping at one point. I include a sample chart which should give you a general idea of the chart I want to make and the data set from which it was made.
View 5 Replies View Related