Excel 2010 :: Chart - Clustered Column With Line
Jun 9, 2014
I would like to be able to add a line (a trend line) to a clustered column chart. The attached jpg (picture copied from Excel Charts - Easy Excel Tutorial) shows the general structure, with the red (poorly) hand drawn lines representing what I want to add to the chart.
If using Excel's Trend line functionality is not an option, I have already calculated the trend points adequately, so have the data to add as an additional series or combine with an existing series. (using Excel 2010)
View 3 Replies
ADVERTISEMENT
Jan 9, 2013
I was recently upgraded from Excel 2003 to 2010. I have some code that creates a 3d clustered bar chart, previously the chart's rotation was 0 and now it seems like Excel wants it to default to 15 degrees. I'd like to change the rotation back to zero, but Excel doesn't seem to see the chart.
I recorded a macro, inserted the relevant recorded code in my routine, but Excel doesn't seem to like it.
' begin code ------------------------------------------------
Dim Rng As Range
Dim cTyp As XlChartType
Set Rng = Range(Cells(2, 1), Cells(11, 2))
cTyp = xl3DBarClustered
Charts.Add
[Code] ....
I'm getting a Visual Basic error that says "Run-time error '-2147024809 (80070057)': The item with the specified name wasn't found."
Excel seems to know the chart name, but doesn't seem to think there are any shapes (initially, a loop looking at the names of shapes in the shapes collection returned nothing; printing ActiveSheet.Shapes.Count returns zero.)
What is the correct method of rotating a 3d clustered bar chart?
View 4 Replies
View Related
Nov 27, 2011
I am looking for a creative way to display a pie chart within a data point marker of a line chart.
My database has 3 value columns, Type1, Type2 and the Total (Type1 + Type2)
these are recorded per day (Date, in Column A)
I have a line chart that displays the total by date, but I want to find a way to display the percentage split of a particular day by type.
I was thinking to load the chart image into the Data point marker, but i don't think that is the best way as the data is updated daily and I would have to do it each day for a few line charts.
The other way I was thinking about was to have a generic Pie chat in the Line chart (Maybe in a corner) and the pie would update depending on way date series was selected or Mouseover'd)
the way that I am approaching it at the movement (Not the best way and by far not the coolest way. Is to have a list of all the dates in a column next to the Line chart and using some VBA, what ever date is selected in the column the pie chart displays the corresponding data. But eh challenge is that when there is alot of dates, I am going to be scrolling up and down.
I am using Excel 2010, but I cant not use the slicer's as the other users do not have 2010, they have 2007.
View 1 Replies
View Related
Jul 12, 2012
I would like to plot the 1st dynamic line chart as shown in [URL] ..... but i never write any excel macro 2010 before, any sample of this?
View 4 Replies
View Related
Oct 11, 2011
I want to a horizontal line in a chart. There are only two figures with me. One I want to display as a column chart. The other as a horizontal line chart. (I can use both excel 2003 or 2010, whichever is suitable)
View 2 Replies
View Related
Jan 29, 2014
I'm using Excel 2010
I'm working on a workbook for tracking debt. It has 15 sheets. Instructions, Charts (for showing debt change over time), "Invisible" (this is where my chart data is, I plan to hide it), and 12 month sheets. On the Invisible sheet, for example, I have my data set up. I'm pulling the data from other sheets. In the screenshot, I'm using =Month12!P48 as the formula to pull my data from the other sheets. But, the user hasn't entered data yet for month 12, so the line chart drops to zero there. I want it to just stop and do nothing, until there is data in that cell. (I would prefer to use a line chart vs a scatter chart for this, but I have the same problem in both)
data.jpg
chart.jpg
View 2 Replies
View Related
Jan 31, 2014
I have two sets of data (delivery destinaition & profit) for 2 separate depots (A&B) delivering to 3 countrys (1,2,& 3). I have used a clustered column chart to show the number of deliveries to the different countries by each depot. The problem I have is that I want to add separate lines (one for each depot) showing the profit figures for each destination (on a secondary axis).
View 4 Replies
View Related
Mar 15, 2012
I need to show a chart with new and return visits 2 years side by side. I also need to show a budget line and 2 seperate utilization lines. How to show this.
View 1 Replies
View Related
Jan 19, 2013
Using Excel 2010. I have a Column Chart that shows 3 data series by month for one year
How can I customize the chart to group the data series on the X-Axis and repeat the 12 month series 3 times on one chart with one X-Axis to show each data series as a group?
View 5 Replies
View Related
Nov 29, 2013
I have a spread sheet with product codes on and 5 different prices types but they have only pulled through 4 times so need to insert a 5th line for each product code
View 2 Replies
View Related
Feb 15, 2012
I am trying to overlay a line chart on top of a stacked column chart. The stacked column chart is a chart where the x axis is dates and the y axis is amount. The line chart is a projected amount that I will reach in few years; the x axis is the date while the y axis is an amount. I can get a chart that has a line and stacked columns, but ever time, the dates get messed up. The line has an extremely wide date range while the columns only have about a month of data.
View 9 Replies
View Related
Apr 24, 2014
I am trying to create a 100% stacked column which has a superimposed line chart over the top of it.
Basically % of yes and no for two separate datasets, but which share the same characteristics. The x-axis is months of the year.
CSP Yes
CSPNo
All Yes
All No
Apr-13
6
19
[code]....
I can create 2 separate charts. One for the yes/no of one set as a 100% stacked column. I then use 'no fill' on the No column to stop this from being seen.
I can create a 100% line chart for the second data type, and 'no fill' the 100% line that appears.
However, I can't merge the two charts to show the Yes % for one dataset as bars and the Yes % of the other as a line.
I am using Excel 2010 on XP.
View 2 Replies
View Related
Sep 15, 2014
In the attached file I have the data which shows me the market size in value, my market share in value & I did a calculation to get the percentage. What I need is a chart that shows me the market size in column graph, my market share in line graph and I want the percentages to be showing also.
View 3 Replies
View Related
Mar 10, 2014
My chart is coming in blank when I set up a line chart. This is my data that I selected and then pressed chart. 1997
63.9%
1998
63.2%
[Code].....
View 9 Replies
View Related
Apr 10, 2014
I have a data series plotted as columns. Then I want a horizontal line at $5,000 to appear all the way across the chart. It appears from the 1st to the last data point, but there is blank space before the first point and after the last point. I would like the red line to extend into this blank space before and after, so that it is going across the entire chart.
I tried playing around with different axis settings and no luck.
View 2 Replies
View Related
Nov 9, 2006
Here's a sample of a chart that I want; However, I want the bar chart to be a stack chart as I have multiple "Failure modes" per month that I want to show the number(or count) of failures per month. Then I want the line chart to remain the Complaint Rate for that month.
I just can't seem to figure it out.
This chart pulls from a data set that looks something like this: ....
View 9 Replies
View Related
Jan 25, 2013
i have 5000+ addresses with no punctuation in them, just seperated by line breaks. i need to be able to add a delimiter (semi-colon, colon, full stop, any will do) to the end of every line of the address, not the cell; in order to extract the info using 'Text To Columns' in Excel 2010
View 9 Replies
View Related
Sep 30, 2013
How can I get this code to loop through every line on sheet?
Code:
Selection.Copy
Windows("SheetA.xlsm").Activate
Cells.Find(What:="Part Number", After:=ActiveCell, LookIn:=xlFormulas _
, LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _
MatchCase:=False, SearchFormat:=False).Activate
[Code] ..........
View 2 Replies
View Related
Dec 9, 2013
I have a line charts with values above and below zero.
Im looking for a way to colour the steps below zero in one colour, and above zero in another colour - without doing it manually.
Using Excel 2007.
View 1 Replies
View Related
Feb 25, 2011
I am using the the stock chart and I would like there to be a horizontal line across the chart with a y-axis of the opening price. In the end I want this to be in VBA but how to do this manually I should be able to put it in loop of data that will produce many charts with a horizontal line starting at the day opening.
I have tried to add a new series to the chart but I'm using the Candle stick stock chart and the new series comes out as a vertical not horizontal line. I read about using a secondary horizontal axis but all the tutorials I find are in Excel 2003 and they donlt line up well with Excel 2007.
I found this link on charts with horizontal lines but again they are in 2003 and I'm using a candle stick stock chart not a scatter chart. [URL]
View 6 Replies
View Related
Feb 15, 2007
Im plotting data on a Line-Column 2 Axes Chart which works really well with 4 data series (2 column, 2 Line) but when adding a fifth data series, the fourth disappears from view. I can see its still there cos I can display the values but I cant get the line to appear. The values for the 5th series are also similar to other series values so its not like the chart cant display it....are there limits to the number of series on such a chart?
View 9 Replies
View Related
Feb 23, 2012
I have been trying to chart temperature differences over 10 day's time for six cities using a line graph. For some reason, the lines are all clustered at the bottom of my graph, with values of 0. My spreadsheet is accurate, without any blank cells. I'm using Excel 2010.
View 1 Replies
View Related
Apr 5, 2012
How I could create a chart (standard column) with an average line in Excel 2010?
View 4 Replies
View Related
Jun 26, 2014
I have been given a task to create a line graph who has 10 categories and each category has 5 different values. I need to plot a line graph, so that those 10 categories should appear on the Y-axis instead of X-axis.
I am using Excel 2010.
View 8 Replies
View Related
Mar 2, 2014
I'd like to create a simple graph exactly like the one on the picture, but for the life of mehow to do this on Excel 2010.This is the data I have:
Seperation First target Second target
0 59.00% 0.00%
2 64.28% 40.62%
4 62.68% 48.99%
6 60.81% 65.83%
8 61.82% 70.21%
View 6 Replies
View Related
Nov 21, 2007
I want to show 8 members of staff's names, with their sales closing percentages. I want then to produce a chart showing their percentages as a column with a line showing 16% going across the chart showing who is above and who is below the target.
Ideally i would also like to change the colour of the columns or background of those below the line to show who is under target.
View 4 Replies
View Related
Mar 27, 2014
Warrantee.xlsx
I attached the sheet that I am trying to get up and running, there is two things I need to do, but cant get it working as I intend to.
Sheet 1 - When the invoice number is fulled in in cell F8 a message box must pop up requesting the hyperlink to the invoice saved on a share folder, but for now on the desktop, when the file is selected it (the hyperlink) must be returned to cell G8, then once the last cell (I8) has been completed, the line 8 must be locked so that it can't be editted again without a default password and a new line must be added below line 8 for processing, I tried recording the macro, but it only works on one line, and on the message box request, I truly am not up to speed yet, this I can't get up and running.
Excel 2010
View 2 Replies
View Related
Sep 19, 2013
Windows 8, Excel 2010
I have XYZ Coordinates for a continuous 3-D line that has numerous segments. I want to input a distance along that line, and have it create the XYZ coordinates at that point. See Image for reference.
Row 2 is my start point - I input the initial coordinates here - this point is the origin of the 3-D line
Column B is where I want the calculated Y value to go for each point
Column C is where I want the calculated X value to go
Column D is where I want the calculated Z Value to go
Column E is the how far along the 3-D line that the (to be calculated) point should be at. (MD1)
Columns G, H, & I are given to me, and I use this data to generate the coordinates in Columns J, K, & L
Column O is the cumulative length of the line at that coordinate. (MD2)
Basically, I had planned on writing a formula to:
Find the coordinates of the point who's MD2 (column O) is before the desired point's MD1 (column E)Find the coordinates of the point who's MD2 (column O) is after the desired point's MD1 (column E)Subtract MD's (column O) to get the length of the segmentFind the distance along that segment that MD1 (column E) fallsUse that distance to traverse along that line to the desired point.
View 1 Replies
View Related
Jan 15, 2014
Why when I drag the dotted blue page break line does it sometimes break the entire doc into one page per cell ?
The doc is not wide. When I first load I can drag the break line successfully. Then I print preview... select print on both sides... boom.. goes from 4 pages to 14. Then I go back to page break view... drag the line... boom... Hundreds of pages. Even if I revert back to printing on one side it still is messed up.
How do I make this stop?? What am I doing wrong?? Office 2010
View 1 Replies
View Related
Apr 24, 2014
I'm trying to create a macro that will look at each worksheet in a workbook and then delete the last line of data on each worksheet. The last row can vary on each worksheet. This is what I have come up with but it is not working. I am on Excel 2010 and Windows 7.
Sub Macro1()
Macro1 Macro
Dim ws As Worksheet
[Code]....
View 2 Replies
View Related
