Im trying to enter a formula for volatility in my excel 2010 spread sheet
my hig low close is listed verticaly in A,B,C
The formula for D1 is supposedly “={LN((A1)/(B1))}^2”
The formula for E1 is supposedly =SQRT(SUM(D1:D10)/10)*SQRT(252)*100
I put this in D1 and it is giving me an error
I am having a terrible time with Excel today. The version I'm using is Excel 2010.
I just want a simple division formula in a cell, formatted to accounting. This should be really easy, but it isn't reacting the normal way.
The simple division is =13588/12
The output in accounting format should be 1,132.33.
Every time I enter this formula into a cell that is pre-formatted to accounting, the result is 1132 1/3. It also erases my formula and replaces it with the value.
Very simple Excel 2007 spreadsheet. It consist of four columns with either numeric or alpha data in the. No formulas, no macros etc...
She emailed the spreadsheet to me and it works fine, I can enter data without problems. Whenever she tries to use it she just can't enter any data. She clicks in a cell and it highlights but she doesn't get a cursor and can't enter data. If she tries to click in the area underneath the toolbar to enter data she also does not get a cursor!! It used to work just fine for her but has suddenly stopped!
When I enter a value into a cell and press "ENTER" or press the Right Arrow the whole spread shifts to the left instead of just confirming the entry of the cell and moving one cell(column) to the right.
This is a spreadsheet that I have used for over 3 years so something has changed in one of the settings.
I have Office 2003.
I have a macro that will email a link of the worksheet.
the problem is I may have different email addresses to send it to. I want to be able to have an input box come up, and the person to enter in an email address, click ok and have the macro continue to email.
Sub Make_Outlook_Mail_With_File_Link()
'Working in Office 2000-2010
Dim OutApp As Object
Dim OutMail As Object
Dim StrBody As String
If ActiveWorkbook.Path "" Then
Set OutApp = CreateObject("Outlook.Application")
Set OutMail = OutApp.CreateItem(0)
[code].....
Have developed a form for my associates and want them to be able to move to the cellls I want them to fill data in to by merely hitting the TAB or ENTER key vs. having to move the cursor to each cell requiring them to input data.
Want cursor to move in a specific cell order. You would think you could merely say 1M, 2C, etc.
I have developed a Userform button in Excel 2010 using the developer icons, which when clicked on with my mouse it runs my super dooper macro. It works great!
But one thing I want to have happen is to have the choice of using the Enter key to start the macro or use the left mouse button
For example, I place data in (say) cell A1 and the userform button is in cell A2. When I place the data in A1 and press the Enter key, the cursor moves down to A2, but doesn't highlight the user button. When I press the Enter key again, the cursor moves to cell A3.
What I want is when I fill in the data in A1 and press the Enter key, the cursor moves to cell A2 and selects the button, so that when I press the Enter key again, it activates the macro.
I'm using Excel 2010, and I need to restrict the value the user can enter into a cell (E9).
In cell E3 is the screen width (pixels). eg 6024
In cell E5 is the preferred width of a window. eg 450
The user, in cell E9, enters an x coordinate for which they prefer the top left corner of the window whose width is specified in E5.
If the value that the user enters in E9, added to the width entered in E5, exceeds the value of E3, (if E9+E5 > E3) then the value should be disregarded (window will be off right of screen) and the user re-enter.
I'm not familiar with the use of data validation, so I'm uncertain as to how to use it in this circumstance.
I'm having some trouble getting control ENTER & EXIT events to fire properly when having controls embedded on frames within a userform. I'm using Excel 2003, 2007, & 2010. Here's the userforms I'm working with:
With FRAME:
Without FRAME:
In both cases, the DESCRIPTION field is disabled. The selectable controls on both are a combo-box, textbox, listbox, & 2 buttons. On the FRAMED version, the combo-box & textbox are contained on a FRAME.
Here's the code, same on both userforms:
Code:
Option Explicit
Private Sub cmbRecipes_Enter()
ListBox1.AddItem "ENTER - " & cmbRecipes.Value
End Sub
Private Sub cmbRecipes_Exit(ByVal Cancel As MSForms.ReturnBoolean)
ListBox1.AddItem "EXIT - " & cmbRecipes.Value
End Sub
All this is doing is posting a message to the listbox when the combo-box ENTER & EXIT events fire. This works as expected without the FRAME, ENTER is shown when the combo-box is entered and EXIT is shown as focus is moved to another control. But when running it on the FRAMED version all I get is a single ENTER event recorded regardless of how I move the focus through the control set.
Another oddity is that if I have more than 1 control that can receive focus on the FRAMED version, it appears to work correctly.
Im using excel 2010. Im looking to have a map of the world in excel. I work in sales with 2 other people and we wish to divide the world up by countries.
It would be nice to have the names in a list and colours represent the countries.
I'm have Excel 2010 and Windows XP. Each week I get 3 spreadsheets and each has data unique to it. Each spreadsheet has a week number column which is common to all three. I want to combine the three worksheets into one and make create several dynamic charts for management. How should I organize a large spreadsheet? In addition to my week number I have a host of other date fields. Some of the data I get is (1) vehicle VIN numbers (2) City/State/Country (3a) I break up the VIN to give me vehicle type (3b) year of assembly (3c) car type (3d) number of doors (4) mileage (5) complaint (7) defect code etc. etc. What are the do's and don't when setting up a large spreadsheet? I have data by week which goes back to 2006 and so my date fields go top-down. I inherited the three spreadsheets and would like everything under one roof, so to speak. One spreadsheet which I can make my charts.
View 1 Replies View RelatedI have a system running Windows 7 Professional (32 bit) and MS Office 2010.
In Excel 2010, I have a spreadsheet that contains several hundred rows of data. When I cut and paste a section of data, Excel jumps to the top of the spreadsheet. This does not happen when I copy/paste, just cut/paste.
I just want to add it to my excel 2010. How can I add a date picker in my spreadsheet, when the cell contains a date format????
View 14 Replies View RelatedOpen a brand new spreadsheet whether the format is set to "General" or "Text" it will not let me enter numbers. For example, when I enter 2007 in the cell it displays 20 07 not really that big of space between the two zeros - but still a space. I can't format this no matter what I do.
View 1 Replies View RelatedIn Excel 2010, spreadsheet with part # in column A and customer code in column B. Many part numbers have more than one customer buying the part.
I need to rearrange the information in the example below, where there are two part numbers:
Part Cust
334 CCC
334 CHD
334 CIL
401 CIL
Looks like the layout below, where there are still 2 columns, part # and customer, but with the customer(s) concantenated in column B:
Part Cust
334 CCC, CHD, CIL
401 CIL
Can this be done with any wizard type tool (pivot table, etc)? I am sure it could be done with VBA.
We have a spreadsheet on a server.Without using code is there a way to show who saved the workbook last?
using 2010
Using MS Excel 2010.
As I understand it hyperlinks set in a spreadsheet should work regardless of where you save and/or copy the spreadsheet i.e. as long as the directory location of the location / file the hyperlink is referencing doesn't change (notwithstanding, the user must have appropriate access rights to the relevant directory locations)
However, the situation I have is the spreadsheet was generated and saved to directory location A (intention being this would be the 'master' yearly template) and the hyperlinks set, all of which work when you open the spreadsheet in this directory location. But when I copy the spreadsheet to directory location B, which is intended to be the yearly 'register' location for the spreadsheet, none of the hyperlinks work? When I hold my cursor over a link in the copied spreadsheet, in directory B, I do not get a 'pop-up' path like I do in directory A and when I click a link I get an error message:
Microsoft Excel The address of this site is not valid. Check the address and try again.
As stated above the documents the hyperlinks relate to have not moved, they remain in the same template directory (i.e. the link path has not altered).
I work with Excel 2010 and have a very large spreadsheet with data that I need to manipulate in several different ways. I have been filtering and then cutting and pasting but this is very time consuming . Is there a way to extract specific data from the spreadsheet and transfer it to different worksheets? I don't really know how to use macros.
[URL] .....
I have been tasked with streamlining a process to collect data from a specific online website (Web of Science) and import it into an Excel 2010 spreadsheet.
Currently they are going to the website, entering a short number of search parameters and then manually recording the pertinent data from the webpage. They would like to be able to enter a keyword in Excel (which acts as the search item) which then automatically does the rest of the process and provides them with a spreadsheet of the required data.
Is this possible? Perhaps by using Visual Basic code within Excel? I also saw a method that employed SharePoint Server 2010.
We have a spreadsheet on a server location with macros. Different users will access the spreadsheet from one pc on different shifts. Is there a way to set the area as a Trust Location for all users on the PC or enable the macros in the spreadsheet to execute for all users without having to set up the spreadsheet trust location or macros for each user? I would like to have the spreadsheet accessable to any user on the PC without setting up individual access. The users can change for shift to shift.
View 2 Replies View RelatedWe updated excel from 2003 -> 2010 and this stopped working.
We have a macro which takes pictures from a folder and pastes those pictures in the excel -sheet.
At 2003 the pictures were correctly pasted to their positions, but at 2010 the pictures appear in somewhere at the same sheet. (not at the right places, which should be at column "o" at the same row.)
Macro (working correctly at 2003) :
Sub Kuvan_piirto(ic As Integer)
On Error GoTo loppu
SourceFile = Enari
DestinationFile = "Live1.JPG" ' Define target file name.
FileCopy SourceFile, DestinationFile
ActiveSheet.Pictures.Insert("Live1.JPG").Select
[Code] ..........
What should I change for 2010?
I am using MS Excel 2010.
I have a workbook with 2 separate spreadsheets.
Spreadsheet 1: GOLD
3 Columns:
A1 Number, B1 Name, C1 Acct Bal D1 (Empty)
Spreadsheet 2: Email
2 Columns
A1 Number, B1 Email
I would like to pull the email address for the corresponding Number From the Email sheet to the GOLD spreadsheet and have it end up in Column D
There are more rows in Sheet 2 than 1. I have already narrowed down the ones I need in Sheet 1. (Sheet 1 has 150 rows, Sheet 2 has 7315)
I am new to Excel VBA and am trying to create a macro that will draw information from a spreadsheet. The code i have written so far is shown below:
Sub Event1()
'Dim Event Date As Double
Dim Message As String
Dim Ans As String
' Prompt for Data
[Code] ......
The section i am having issues with is shown in red above.
What i am trying to do is have a message box pop up with the information as shown based on a date being typed into the the original box that pops up (Please enter a date and click on OK). The following message box then displays the required information from the spreadsheet.
I have a word template that gives a popup when started for the user to fill out. At present this is okay, but it is hard to maintain. So what I want is to be able to add all needed information in Excel - since our tools have the possibility to export my needed info to this.
I have a spreadsheet in Excel 2010 named 'Input TR'. This info I want in the popup macro in word. When choosing name from a dropdown menu - I want Excel to give me the choices instead of having it in the coded macro. After I have choosen the name - I want the product belonging for this name in the 'Product/Service:' dropdown menu, e.g Test 1 will give the value 1...5. (I will only be able to choose one of them)
Today - everything is coded in the word2010 macro, and thus difficult to maintain.
I have a word docx embedded within my spreadsheet .
Both are on Office 2010 versions and I have named the embedded word doc
docx = CCPBlank (named range)
sheet = Support Data
I want to open the word doc from within the spreadsheet from a user form I already have created for other module calls.
Any simple VBA code to open the embedded docx?
I have looked a previous posts and not sure they are suitable. I have embedded the docx as I want to ensure only that empty version is opened each time. It also means I only have to send one file (xlsm).
I am working with a very large spreadsheet 10k references... I need to add sequential numbers in a column to identify the references but I need to use he filter in the author column due to the way my referencing software exports the data...
When I try to use the pull down autofill it just keeps repeating the last or second last number of the cell - the autofil box that usually appears has disappeared.
Im using excel 2010
I'm using Excel 2010. One spreadsheet I'm using has 1048576 lines and is a XLSX file. The other file has 65536 lines and is also a XLSX file. When I try to do a VLOOKUP, I'm given an error stating "invalid reference. This file version cannot contain formulas that reference cells beyond 256 columns or 65536 lines.
If both are XLSX files how do I expand the amount of columns in the one spreadsheet with 65536 lines? I thought all XLSX files had a million lines.
I need entering multiple arguments in an IF formula in Excel 2013. Here is the formula with just 1 argument.
=IF(SUM($G$4:G15)>3000,G15*0.8,0)
I need to combine it with the following.........
=IF(SUM($G$4:G15)>10000,sum($G$4:G15)-G15,0)
So to say, if the sum totals more than 3000 but less than 10000, then I want the cell value (G15) multiplied by 80% (.80). if it is greater than 10000, i want the sum minus 10000. If both arguments are false (sum totals less than 3000) then the value placed should be 0.
This formula must be confirmed with CTRL+SHIFT+ENTER not just ENTER. You will see { } brackets appear.
View 3 Replies View RelatedI am working on Excel 2010. I want to find a way to link data from one spreadsheet to another one and whenever I update the first spreadsheet, the second one will be automatically updated?
View 2 Replies View Related
