Have developed a form for my associates and want them to be able to move to the cellls I want them to fill data in to by merely hitting the TAB or ENTER key vs. having to move the cursor to each cell requiring them to input data.
Want cursor to move in a specific cell order. You would think you could merely say 1M, 2C, etc.
I need to remove numbers from a string of text and put them into new cells in Excel Starter 2010. There are two different values which need moving. The first is in parentheses and the second follows the parentheses.
Here's a few examples of what I mean:
Original text
RED008 - Wickaman and Hoodlum bandwidth (0.06Gb @ 2.00) 0.12
MFR005EP - Various Artists bandwidth (0.19Gb @ 2.00) 0.38
RAZORS010 Future Cut bandwidth (0.01Gb @ 2.00) 0.01
would like to split into...
Cell 1
RED008 - Wickaman and Hoodlum bandwidth
MFR005EP - Various Artists bandwidth
RAZORS010 Future Cut bandwidth
Cell 2
(0.06Gb @ 2.00)
(0.19Gb @ 2.00)
(0.01Gb @ 2.00)
Cell 3
0.12
0.38
0.01
I am using Excel 2010 and basically i am trying to fill a range of cell with a green color if any value was enter in a specific cells. Example: I would like to fill range: A10:c13 with a green color (regardless of the cells content in this range) if a value was entered in cell C10 or C11 or C12 or C13.
I've tried conditional formatting but unfortunately I'll have to apply formatting for every cell and for a range of over hundred cells is not efficient.
How we can select specific cells in the filtered data using VBA in Excel 2010.
I need to select 10th column, 5th row data .. or 10th column, 6th row data .. or 13th column, 8th row data...
How to select this data using VBA.. I am struck here .. If I give the below code.. the hidden cells inbetween the filtered data is getting selected.. only the first row is getting selected correctly.. i.e, ..rnVisible(1, 2).Select .. If I change the row like rnVisible(2, 12).Select its selecting the hidden cells ..
Dim rnVisible As Range
Set rnVisible = ActiveSheet.Rows("2:10000").SpecialCells(xlCellTypeVisible)
rnVisible(2, 12).Select
MsgBox ActiveCell.Address
[Code ........
I am using Excel 2010 and I am trying to average the amount of days in a month to a daily average per person in my worksheet.
Total sales per person
A5 = 10 - This is the Grand total per person for column A
A6 =4
A7=6
Daily average per person
C5=2.6 - Average for all persons here
C6=2.0
C7=3.0
The formula I am using is:
=(SUMPRODUCT($A$6:$A$15,C6:C15))/$A5
Which gives me an answer of 2.6 in cell C5 as shown above which is what I am wanting.
Please note that my cell range for my staff goes from 6-15 for both Column A and C where the other cells are blank in both columns.
My question is, If I was to clear all the data in both Columns A6:A15 and C:6:C15, cell C5 would return to a #VALUE. How to I change the formula so that if the cells were Blank, cell C5 would also be blank until I enter data for each person again?
import it into to Stata to do statistical analysis. I always receive spreadsheets like this:
country
1991
1992
1993
1994
1995
1996
1997
1998
1999
2000
[code].....
and I have to manually reorganize it like this to import into Stata:
country
year
value
Benin
1991
20
Benin
1992
254
[code].....
Is there way I can quickly design a macro to do this? The problem is that I generally have a list of about 60 countries, and years from 1991-2011. So, it's really time consuming copying the column of data corresponding to the year, pasting below, repasting the list of countries and the years...then again..then again...then again...I'm using Excel 2010.
Is there a way to sort out the sheets into alphabetical order in excel 2010?
View 5 Replies View RelatedI have a macro that will email a link of the worksheet.
the problem is I may have different email addresses to send it to. I want to be able to have an input box come up, and the person to enter in an email address, click ok and have the macro continue to email.
Sub Make_Outlook_Mail_With_File_Link()
'Working in Office 2000-2010
Dim OutApp As Object
Dim OutMail As Object
Dim StrBody As String
If ActiveWorkbook.Path "" Then
Set OutApp = CreateObject("Outlook.Application")
Set OutMail = OutApp.CreateItem(0)
[code].....
Im trying to enter a formula for volatility in my excel 2010 spread sheet
my hig low close is listed verticaly in A,B,C
The formula for D1 is supposedly “={LN((A1)/(B1))}^2”
The formula for E1 is supposedly =SQRT(SUM(D1:D10)/10)*SQRT(252)*100
I put this in D1 and it is giving me an error
I am having this weird problem. The work laptop I received with excel 2010 does not allow me to use the vertical arrow keys when navigating through multiple lines when editing a cell. When editing the cell and I press the up or down arrow key, instead of moving to the next line within the cell, the cursor moves to the next cell. Is there a way / an option to have this fixed?
View 5 Replies View RelatedI am trying to sort multiple values in ascending order (example attached) however I can't get this to work. Tried looking at a few different forums and although there is plenty of sorting questions out there they all tend to be relating to dates not different values (i.e text and numbers).
View 14 Replies View RelatedFind the sorting method of dates in excel 2010. I have dates in one column and i want to sort it, but I am not able to sort in ascending or descending order.
View 1 Replies View RelatedI wanna sort these numbers in descending order and related to each others in excel 2010.
H
G
F
E
D
C
B
A
1383.99
1533.954
831.197
1533.954
1533.954
1383.99
700
1533.954
1
[Code] .........
About descending and related to each others, I mean for example : #700 in column A,B,C,D,E,F,G,H places in the same row and the same happen to #1533.954 and others. About the numbers that are The One ( like 549.894), I need to put them in its column and a new row with empty cells in its other columns. In the end i want a table like this:
H
G
F
E
D
C
B
A
1533.954
1533.954
1533.954
[Code] .........
I am having a terrible time with Excel today. The version I'm using is Excel 2010.
I just want a simple division formula in a cell, formatted to accounting. This should be really easy, but it isn't reacting the normal way.
The simple division is =13588/12
The output in accounting format should be 1,132.33.
Every time I enter this formula into a cell that is pre-formatted to accounting, the result is 1132 1/3. It also erases my formula and replaces it with the value.
I have a list of terms to put together and what I have is a master list of 6 concatenate functions and I need to link them to all the different words in my list.
The first word in collumn A needs to be with the function in D1, the second word (A2) needs to be with D2, then A3 with D1, and A4 also with D1, while A5 with D6, etc.
It looks something like this:
for your info...I have put numbers in the adjacent cell corresponding to which of the 6 concatenate functions need to go into the cell in collumn C
So in reality all I need is a function that would rearrange my list of 6 functions from Collumn D into collumn C based on the numbers 1-6 I have in collumn B
Workbook.txt
(attached is an example to better see what im talking about. Disregard that the concatenate functions are not working...it doesnt matter right now.)
I am using Excel 2010. I am tracking client orders on a spreadsheet. I would like to offer a 60 percent rebate on revenue from orders placed between the first order date and 30 calendar days thereafter. On day 31 and continuing through day 60, I would like to offer a 40% rebate. On orders placed on day 61 through 90, I would like to offer a rebate of 20%. From all of the orders placed by clients who start ordering on different dates, I need to sum their order revenue in these three time periods. I have the individual client order data arrayed on my spreadsheet - one order per row.
I am capturing the unique client ID number (Column A), the order date (Column B), and the associated revenue (Column C). Keying off of their unique ID number, I would like to calculate the sum of how much revenue is generated in calendar days 1 through 30, days 31 through 60, and days 61 through 90 from the very first order date from any given client. The start date can be any date in the month, so I can not rely on any calculation that uses the calendar month. Orders are not necessarily placed every day. Multiple orders may be placed on any given day, and then no orders may follow for many days afterward.
I have developed a Userform button in Excel 2010 using the developer icons, which when clicked on with my mouse it runs my super dooper macro. It works great!
But one thing I want to have happen is to have the choice of using the Enter key to start the macro or use the left mouse button
For example, I place data in (say) cell A1 and the userform button is in cell A2. When I place the data in A1 and press the Enter key, the cursor moves down to A2, but doesn't highlight the user button. When I press the Enter key again, the cursor moves to cell A3.
What I want is when I fill in the data in A1 and press the Enter key, the cursor moves to cell A2 and selects the button, so that when I press the Enter key again, it activates the macro.
I'm using Excel 2010, and I need to restrict the value the user can enter into a cell (E9).
In cell E3 is the screen width (pixels). eg 6024
In cell E5 is the preferred width of a window. eg 450
The user, in cell E9, enters an x coordinate for which they prefer the top left corner of the window whose width is specified in E5.
If the value that the user enters in E9, added to the width entered in E5, exceeds the value of E3, (if E9+E5 > E3) then the value should be disregarded (window will be off right of screen) and the user re-enter.
I'm not familiar with the use of data validation, so I'm uncertain as to how to use it in this circumstance.
I'm having some trouble getting control ENTER & EXIT events to fire properly when having controls embedded on frames within a userform. I'm using Excel 2003, 2007, & 2010. Here's the userforms I'm working with:
With FRAME:
Without FRAME:
In both cases, the DESCRIPTION field is disabled. The selectable controls on both are a combo-box, textbox, listbox, & 2 buttons. On the FRAMED version, the combo-box & textbox are contained on a FRAME.
Here's the code, same on both userforms:
Code:
Option Explicit
Private Sub cmbRecipes_Enter()
ListBox1.AddItem "ENTER - " & cmbRecipes.Value
End Sub
Private Sub cmbRecipes_Exit(ByVal Cancel As MSForms.ReturnBoolean)
ListBox1.AddItem "EXIT - " & cmbRecipes.Value
End Sub
All this is doing is posting a message to the listbox when the combo-box ENTER & EXIT events fire. This works as expected without the FRAME, ENTER is shown when the combo-box is entered and EXIT is shown as focus is moved to another control. But when running it on the FRAMED version all I get is a single ENTER event recorded regardless of how I move the focus through the control set.
Another oddity is that if I have more than 1 control that can receive focus on the FRAMED version, it appears to work correctly.
I'm using Excel 2010. I have a spread sheet with sales data covering 3 years and multiple customers. I was able to create formulas such as this to calculate the figures for the entire sheet (all customers) by year.
=SUMIFS(J2:J12904,E2:E12904,">12/31/11",E2:E12904,"<1/1/13").
I believe that in order to use filters that show this date for a specific customer I need to convert this to a SUMPRODUCT formula, I've tried this multiple times and had no luck.
I need to add something to the code below to have my first row of data entered into cell "Q8". As it is now the data is starting on row Q9 instead of Q8, but the rest of it is filling in correctly.
[Code] .....
Is there a way to prompt users to enter information in a specific range of cells before they save?
View 1 Replies View RelatedMy direction keys currently move the screen instead of move from one cell to another. For instance, I will have cell A1 highlighted and then press the down key. Instead of going to A2, it stays at A1 but the screen moves down one cell
View 2 Replies View RelatedI am using lesson 33 of Excel VBA and Macros with Mr Excel as my guideline. The coding is as follows:
Dim WBO As Workbook 'original workbook
Dim WBN As Workbook 'individual data workbooks
Dim WSL As Worksheet 'List of files worksheet
Dim WSN As Worksheet
Set WBO = ThisWorkbook
Set WSL = WBO.Worksheets("List")
Set WSD = WBO.Worksheets("Data")
[Code] ......
I have indicated above with ( ) the beginning of my problem.
From the workbook with the list of workbooks to open, in each case I want to refer to a worksheet in each workbook
named "Report" and grab all the rows with data exept heading (rows 1 & 2) and 9 columns.
How do I get WSN in the code above to include the worksheet named "Report" or do I need different coding. Using Windows 7 & Excel 2010.
Is there a way to differentiate the number of unique and duplicate entries (considering multiple criterias) using a formula.
I am finding it hard to describe the request hence i have attached a spreadsheet for reference.
The first tab contains the data where I want the result in 'column J'
The second tab contains the metrics of how to calculate the result.
I am sure this will be difficult to understand at first hence feel free to ask as many questions you would like to [only related to the subject ]
For the record, I use Excel 2007 & 2010.
how can i sum base on the Criteria in Columns G, in this sample the sum should be 67.
Sheet1ABCDEFG1V. GoodGoodFairBadN/AReported29853N/A8Bad31085328N/A410953N/A8Good510853N/A8Good61085378Good77853N/A8V. Good810853N/A8Good910753N/A8Reported108853N/A8Good11585308N/A1210653N/A8Good1367Excel 2010Worksheet FormulasCellFormulaG13=67
I have an excel 2010 spreadsheet that lists all of our vendors and the amount we spent with them over the last year.
I want to know how many of them were local vendors.
I have a list of all the zip codes within a 100 mile radius (there are about 500 zip codes). I would like to write a macro or sort function that searches the entire vendor list and only reports back those vendors that are included in the zip codes I specify.
The columns are as follows:
A B C D E
Vendor City StateZip CodeTotal AP
Vendor 1TROY AL36082527.37
Vendor 2PHOENIXAZ85054100
Vendor 3TUCSONAZ8571416255
I want to keep the all the columns, I just want to eliminate all of the vendors that do not fall within the zip code criteria I set.
I have an excel workbook where some sheets have a column called "Name" in Row 3. The column where "Name" appears shifts based upon other criteria so it's not set within 1 specific column.
The real data for the "Name" column starts in Row 5. Is it possible to create a macro that looks in Row 3 for "Name", then once it finds that column, it does a find and replace from Row 5 to the end of the data and replaces every space with a ^.
For example, if I have:
Row 3 Name
Row 4
Row 5 John Smith
Row 6 Jane Doe
Row 7 John Doe
Row 8 Jane Smith
I'd like the data to become:
Row 3 Name
Row 4
Row 5 John^Smith
Row 6 Jane^Doe
Row 7 John^Doe
Row 8 Jane^Smith
I'm using Excel 2010 if that impacts anything.
how to run some VBA code (written by someone else, unfortunately) only when clicking once in cell A1, and not run in any other cell. This is being run in Excel 2010. The code I would like to run in this manner is below, and currently will run when the user clicks on any cell in the worksheet it is applied.
[
Option Explicit_________________________________________
Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean)
'If IsDate(Target.Cells(1, 1).Value) Then
Set DatePickerForm.Target = Target.Cells(1, 1)
DatePickerForm.Show vbModal
Cancel = True
'End If
End Sub
]
I have tried and been searching but cannot find the answer. Is it possible to change the row height and column width for only a selected range in my spread sheet, for example, F13:I23? I am using Excel 2010.
View 2 Replies View Related