I am looking for a Macro, which would first ask me to input the member notation in a new tab (Say M1 in the example). After I give the input as M1 or M2 or M2 or so on, it would display only rows for Section 1 (min and max values) and section 4 (min and Max values)(highlighted in Red). I know it is petty simple, but I am still an amateur with regards to Macros.
Member
Section
Axial
Shear Y
[Code].....
I need an excel macro that will copy the last row of data from one worksheet within a workbook to another worksheet in the same work book. The last row number of data will alwasy vary
View 9 Replies View RelatedWhat i am trying to do is in 1 workbook (labled as Book1 literally), it needs to copy the sheets out of every .xls file there is in a single directory, we'll call C:MyFolderMySubFolder. There can be anywhere between 1 and 366 files in this particular folder and I need all the sheets in each file labled 'CC' copy that entire sheet, paste that sheet to Book1, go back to that file it was copied from, close it (saving changes is ok), then move on to the next file.. and the next file... and so forth
While pasting into book1, I need each WS copied from each file to paste to a new worksheet in book1 rather than combining them into 1 or overwriting, and lable each of those sheets the file name of which the sheet came from...
The names are in sequence. All files in the folder will be labled as a date such as "9-6-12" so the sheet name in book1 would be named 9-6-12. (so there may result in 366 new worksheets to book1)
I primarily use Microsoft Office Excel 2003
I am working on a macro that copies tabs from the spreadsheet the macro (button) is located in, creates a new book for them, and then pastes values so that no formulas still exist. The problem I am having is with named ranges. The named ranges do not reference the new sheet, but rather the old spreadsheet. This is fine because the new file is solely for presentation, however, one macro (which selects print ranges based on user selected checkboxes) tries to reference the old spreadsheet once it runs. I would like the macro that I currently have working, to also make this macro in the NEW spreadsheet so that it can still highlight the correct print area when used. The macro does not reference the name of the workbook at any point, it is purely "Range("ai10") type references so I don't understand why it is trying to open the old sheet back up.
View 2 Replies View RelatedI have an excel workbook that serves as a master workbook. I have to create 30 copies of this workbook, 1 for each site. Each workbook will have small differences in the data held. This is because I will refresh the sheet before saving it. There is a dropdown list on the 1st tab of the workbook that contains the names of the sites. The sequense, I suppose would be like: select the next name on the dropdown list"calculate" the spreadsheet to enable the refreshsome sort of "save-as" with the name from the dropdown list forming the name of the file. The Master file must be kept intact.select the next name from the dropdown listcalculate the sheet ........and so on I have a few other things I will add to the script like Protect Sheet etc.
View 1 Replies View RelatedI have a table that lists names, eligibility and # of people. That is just one worksheet. I have a total of 30 worksheets in that workbook. The column with the names is completely filled out. I entered a number in the eligibility and # of people columns and Excel copied all three cells (name, eligibility and # of people) to the same cells on all of the worksheets. I have no formula in any of the cells, nor do I have anything linked.
Example:
1st worksheet - e19 - John Doe, f19 - Yes, g19 - 4
That information is then put on all of the other worksheets in those same cells, even though the worksheets are not linked in any way.
I need is the code for a command button to copy the info in specific cells, to a text box that I have created.
Lets say the cells are in sheet1 and the text box is on sheet 2. The command button will be on sheet3
Also I am copying multiple cells. so If the code can include an example with multiple cells it would be great
I have 5 opened files. I have copied into those files a set of formulas from my master sheet (with the macro). In A3 of ALL the open files, there is a date (ex. Date: 1/4/2014) Based on that date I want to copy the result of what I copied into the files (below is the code that I used to copy into the open files, maybe I could add something to create a named range of the resulting paste) back into the master sheet into a tab called 2014 and into a cell two cells below the cell in row 12 with the MATCHING date.
View 14 Replies View RelatedI have created a macro, which copies data from 1 sheet to another, in order to Format and rearrange the columns.
The problem I have is that if I "Insert" a column on sheet 2, I have to amend all of the ranges in the macro to reflect this.
Sample of the code
Worksheets("FTIS Data").Select
Range("e5:e" & Range("e" & Rows.Count).End(xlUp).Row).Copy
Worksheets("Quote Tracker").Select
Range("c5").Select
ActiveSheet.Paste
Worksheets("FTIS Data").Select
Range("g5:g" & Range("g" & Rows.Count).End(xlUp).Row).Copy
Worksheets("Quote Tracker").Select
Range("d5").Select
ActiveSheet.Paste
i created a sheet and called it "Original" (which somehow is a template), in another sheet i created a big Button named "Create account" ,then i created a macro which copies that "Original" sheet and by default it names it "Original 2 " now that i need a new account each time i click that button to create a new sheet and rename it by the client name i need, in order to keep the "Original" intact as a template. It happens sometimes by mistake that i rename the "Original" one ( The template one) which therefore returns an error when i click the button!
Is there anyway to add to that macro a code which rename that "Original 2" something else lets say "Account" to differentiate it from the Template one?
Or to Protect only the "Original" sheet from being renamed out of the whole sheets i have , in order not to rename it accidentally?
Trying to create a spreadsheet to track transactions. Sheet "A" is the working file with a limit of 25 rows. When a transaction is complete, I would like a macro button that copies one of these rows (1-25) to an archive file (Sheet "B"). I would like it to copy and paste to the next available row on Sheet "B".
I am trying to make a macro, but because of my inexperience, it's not working out. I have got a big list (list 1) of numbers in column E. each number has some information in the cells of columns C, D and L, all in the same row. on the same sheet, I have got another, smaller set of numbers (list 2), also in column E but at the bottom of the sheet. the numbers in list 2 are all present in list 1 (but not all numbers in list 1 are present in list 2). the columns C, D and L on the same row of the numbers in list 2 are empty...............
View 4 Replies View RelatedI have a data sheet like so:
A B
Name Grade
Jim 82%
Bob 90%
Kelly 71%
June 95%
And I also have two cells which are designated as the low and high range. (ie C1 = 85% and C2 = 100%). I need help with the macro for the button that will copy only the rows to a new sheet that fit within the range. So in the example above, pressing the button will create this in a new sheet:
A B
Name Grade
Bob 90%
June 95%
I want to create a macro that will allow me to create a set number of copies of a specific sheet within the workbook. I have one sheet within my workbook entitled "Tab". I want to create a macro that will ask me how many copies I want to create and then proceed to create all the copies. i.e.: select to create 4 copies, with the result being: Tab[original], Tab(2), Tab(3), Tab(4), Tab(5)
View 2 Replies View RelatedI've found afew examples off google searches, but my attempts to edit them arent working...
i want a macro to copy a range, say a1:e5, and paste the values and fonts/boarders/etc (ie no formulas) into a new workbook
the ones i found copy a whole sheet, i just want a portion....
I have this code that works where Column A and B from 12 sheets are copied to a "Complete" sheet where it is saved as a CSV file for import.
I'm fairly new at this and know this code could be simplified to loop through the 12 sheets instead of copying the code 12x!!
I've copied the code for the 1st 2 sheets:
Sheets("Sheet1").Select
For i = 3 To Cells(Rows.Count, 1).End(xlUp).Row
OutSH.Cells(1, outcol).Value = Cells(i, 1).Value
OutSH.Cells(2, outcol).Value = Cells(i, 2).Value
OutSH.Cells(2, outcol + 1).Value = Cells(i, 3).Value
outcol = outcol + 1
[Code] ......
I'm looking for information on building a macro that will automate making copies of a spreadsheet into another workbook that contains very particular information. My master sheet has lists of my customers and the rep's that service them. What I need to do is have macro buttons for each rep. that will pull all the shops that they service and all information for these shops into another spreadsheet.
View 9 Replies View RelatedI am trying to have a macro that separates a list with unique values in column a, copy the results, open a file name in column AG, and then paste the copied stuff into the open workbook.
Currently, it runs, but when I copy to the new sheet, the thing I want goes where I want it to, but I also get an extra sheet1. how can i change this so the sheet1 doesn't get pasted in?
Sub MC()
Dim r As Long, rng As Range, ws As Worksheet
Application.DisplayAlerts = False
Application.ScreenUpdating = False
ActiveSheet.Name = "Sheet1"
With Sheets("Sheet1")
Sheets.Add().Name = "temp"
[code]....
the following code filters data and copies to worksheets specified in code, can this code be shortened to make the macro run faster. Also in my second criteria how can I put "Contains "PT2" in the criteria as nothing happens when i run the macro, is *PT2?
With shtRec
.AutoFilterMode = False
.Range("A7").AutoFilter Field:=8, Criteria1:="LEHMAN", Operator:=xlAnd
With .AutoFilter.Range
On Error Resume Next
Set rng = .Resize(.Rows.Count - 1).Offset(1).SpecialCells(12)
On Error GoTo 0
End With
If rng Is Nothing Then
MsgBox "No data to copy"
Else
rng.Copy shtLehman.Range("A6")
End If
.AutoFilterMode = False
End With
I need a Macro that Copies all the duplicate values in a column (and their corresponding rows) over to a new spreadsheet.
For example,
1 A B C D E F G
1 Z X Y D R M T
2 B 5 7 8 9 0 4
Because 1 is a repeated value in the first column, the macro copies the first two rows over to a new spreadsheet.
I have a macro that copies rows from my DAILY OCCURENCE sheet that have a YES in them to my MANAGER SUMMARY SHEET and G1 is selected which has a hyperlink that opens a new email with the manager's email address and Subject pre-assigned.
I then have to manually go back to the newly generated summary sheet and select the cells and paste them into the email that was just opened.
Is there a way that the generated rows are already copied in memory and all i have to do is CTRL+V into the new email, or even better, the cells are pasted in the email automatically? So basically either the information being copied over stays in memory, or after it is copied into the summary sheet it is copied again. I just dont know how to copy unpredictable ranges generated by macros.
The code that generates my summary sheet for my manager is below.
[Code] ...........
I need to add to a current macro which currently copies the master tab and creates a new tab with tomorrow's date on it. For reference here is the current macro:
View 3 Replies View RelatedConsider two instances of Excel - one with a workbook containing a chart and some VBA code, the other containing a blank workbook. When I paste a chart from the first instance of Excel to the other, all the VBA code from the original workbook is also pasted into a new third hidden workbook in the second instance of Excel! If that weren't weird enough ON WINDOWS XP (but not Windows 2000) if the VBA code included WorkbookOpen or AutoOpen this code is executed in the second instance of Excel, which of course fails if it references sheets that only existed in the workbook open in the first instance of Excel! This is the first time I've seen the same version of Excel do different things on different versions of Windows! Example attached - What's going on!? Auto Merged Post Until 24 Hrs Passes;...note: this does not happen when pasting charts between workbooks open in the SAME instance of Excel
View 6 Replies View RelatedI can assign a number of copies to print by adjusting ActiveWindow.SelectedSheets.PrintOut Copies:= , but what I want it to have the number of copies auto adjust to the value of a cell that contains a formula. I was hoping it would something as simple as Copies:=cell but no luck...
View 2 Replies View RelatedI have written a macro that prompts the user to chose some files and if they meet certain criteria, it copies them to a specified folder.However, I have run into this 424 error "Object required".
Code:
Sub FILES2SFTP()
Dim FileNames As Variant
Dim I As Integer
Dim fso As Variant
Dim Data As String
ChDrive "G:"
ChDir "G:TEST"
[code]....
The error is in this line:
If fso.getfilename(FileNames(I).Name) = ("Name1" & Data & ".xls" Or "Name2" & Data & ".xls") Then
need to create a macro that inserts 3 rows below each existing row of data and simply copies and pastes that data into each of the empty rows before moving on to the next unique row and doing the same thing again.
This is what I have so far, but I can't seem to get the loop right.
Rows("2:2").Select
Do
Selection.Insert Shift:=xlDown, CopyOrigin:=xlFormatFromLeftOrAbove
Selection.Insert Shift:=xlDown, CopyOrigin:=xlFormatFromLeftOrAbove
Selection.Insert Shift:=xlDown, CopyOrigin:=xlFormatFromLeftOrAbove
activecell.Offset(-1, 0).Select
Range(activecell, activecell.Offset(0, 5)).Copy
activecell.Offset(1, 0).PasteSpecial
activecell.Offset(1, 0).PasteSpecial
activecell.Offset(1, 0).PasteSpecial
Selection.Offset(1, 0).EntireRow.Select
Loop
The concept is to have a user open a sheet that breaks down that current day into 15 minute blocks of time. Later, I will work to append that to an Access DB or to a master Excel sheet as I will have multiple engineers inputing times for multiple days. There are multiple paths for this....We don't have Access for everyone yet or I would look at that path now.
Right now I am trying to make the initial input screen easy to use so that they actually use it.
I want to allow the user to select multiple 15 minute blocks and then click a button that adds a specific value to each of those cells. For instance, they might choose 8 15 min blocks that are not necessarily blocked together (C5, C7:C10, C15, C20:C22) They would hit the "Project 1" button and "Project 1" would be inserted into each of those cells.
I have about (5) categories so I would simply have (5) buttons with the different inptu strings.
But how can I have a macro set the value for multiple selected cells? Ideally, they would not have to be blocked together but, if there is no other way, if I could have blocks of cells filled in all at once.
I am using Excel 2010.
only a few of us have Access but I will be the only one accessing the collected data. Besides, I would make Excel query the Access DB for more general use. I
How to protect only the colored cells in excel sheet which has formulas in it and it is a sale sheet because i do not want my team to mixup with the formula.
View 9 Replies View RelatedI just need to convert a range of cells into a PDF with a macro, is there a simple macro for this?
View 6 Replies View RelatedI need to copy two adjacent cells down every 7 rows in the same column.
Would do it manually but have some 4000 rows.