Macro That Finds All Duplicate Values In A Column And Copies The Corresponding Row

May 4, 2006

I need a Macro that Copies all the duplicate values in a column (and their corresponding rows) over to a new spreadsheet.

For example,

1 A B C D E F G
1 Z X Y D R M T
2 B 5 7 8 9 0 4

Because 1 is a repeated value in the first column, the macro copies the first two rows over to a new spreadsheet.

View 8 Replies


ADVERTISEMENT

Macro That Finds, Copies And Pastes

Jun 14, 2007

I am trying to make a macro, but because of my inexperience, it's not working out. I have got a big list (list 1) of numbers in column E. each number has some information in the cells of columns C, D and L, all in the same row. on the same sheet, I have got another, smaller set of numbers (list 2), also in column E but at the bottom of the sheet. the numbers in list 2 are all present in list 1 (but not all numbers in list 1 are present in list 2). the columns C, D and L on the same row of the numbers in list 2 are empty...............

View 4 Replies View Related

Finds Breaks In The Values

Dec 17, 2007

I have a macro that needs to walk down a list of values and when it finds breaks in the values, it will insert a formula for a calculation. The problem I'm having is getting the code to loop correctly until it finally finds the value "End" when it should stop (when I play around with the code, sometimes I can get it to continue the loop, but it blows past "End" and then it experiences an error because it can't end.

Sheets("Master").Select
Range("B1").Select
ActiveCell.Offset(1, 0).Select
AssetIDStartRange = ActiveCell.Address
X = 0
Do
ActiveCell.Offset(1, 0).Select
X = X + 1
Loop Until ActiveCell.Value ""
SortCriteriaName = ActiveCell.Value
ActiveCell.Offset(-1, 1).Select
ActiveCell.Formula = "=SUMIF($B13:$B5000," & """" & SortCriteriaName & """" & ",$H$13:$H$5000)"
ActiveCell.Offset(0, -1).Select

If ActiveCell.Value "End" Then....................

View 9 Replies View Related

Macro: Find Duplicate Values & Sum Values. Per Day Basis

Oct 13, 2006

I have data that looks like this:

day# id amount
1 56575 0
1 56675 0
1 56680 0
1 56683 0
1 56681 0
1 51810 0..............

How do you write an excel macro that looks at the number in the first column (day #) and finds all the duplicate id#s in the second column that are in day 1and adds the amounts together in the 3rd column then writes the first column number (day#), second column number(id#) and the third column (sum of the amounts of duplicate Id#) to an new worksheet. Then the macro would loop through day #2 and do the same thing. Notice that the values in the id column are unique in this data set below this is how I would like the data to look. I have accomplished this in a pivot table but my problem is I need a cvs file to export the final data into an external database which is why I need a macro.....

View 2 Replies View Related

Deletes A Row If It Finds A Specified Value In A Specified Column

Dec 23, 2009

deletes a row if it finds a specified value in a specified column (in this instance, "NB" in column E). However, it is very slow and some end users are complaining about the amount of time it takes to run. Here's what I'm using at the moment:

View 5 Replies View Related

Vba Code Finds Max Value Of Column Subset

Oct 17, 2006

I need a piece of VBA code to assign to an Excel form that determines the maximum value of a subset of one column whose cognate rows in an adjoining column satisfy a particular value.

View 2 Replies View Related

Highlighting Duplicate Values In A Column

Dec 6, 2008

In Column A, there are about 2000 plus entries, is there a simple formula to highlight the duplicate values in conditional format, so that the duplicate values stand coloured.

View 2 Replies View Related

How To Highlight The Duplicate Values In Column

Oct 26, 2013

find the attached Sheet, where some values are entered in column A with repeated action. What I need that through an excel function the repeated values should get red colour like in the Column C.

View 1 Replies View Related

Delete Duplicate Values In A Column

Jul 25, 2007

I have a column of data where duplicate records appear, can I get a macro to review the column and delete the duplicate record, I need the line item number to still show although the serial number has been deleted, please see example below-

line_number Serial_number
14FM12A1QWINC-1A
14FM12A1QWINC-1B
14FM12A1QWINC-1C
14FM12A1QWINC-1D
14FM12A1QWINC-1E
14FM12A1QWINC-1F
14FM12A1QWINC-1G
14FM12A1QWINC-1H
14FM12A1QWINC-1I
14FM12A1QWINC-1J
14FM12A1QWINC-1Jdelete serial number in column B, keep line number 1 in column A
24FM12A1QWINC-2A
24FM12A1QWINC-2B
24FM12A1QWINC-2C
24FM12A1QWINC-2D
24FM12A1QWINC-2E
24FM12A1QWINC-2Edelete serial number in column B, keep line number 2 in column A
34FM12A1QWINC-3A
34FM12A1QWINC-3Adelete serial number in column B, keep line number 3 in column A
44FM12A1QWINC-4A
44FM12A1QWINC-4Adelete serial number in column B, keep line number 4 in column A

View 9 Replies View Related

Highlighting Duplicate Values In A Column?

May 5, 2006

I want to write a macro that highlights duplicate values within a single column. I found - on this site a macro that removes duplicate values, which is huge, but sometimes I just need to highlight duplicates values rather than remove them.

View 2 Replies View Related

Conditionally Format Column B If It Finds A Match In A

Jan 30, 2012

What is wrong with this formula? I have used it before just fine, but sometimes including now it won't work.

PRODUCT_IMAGE Images 244-447439 244-455507 244-455507 244-455508 244-455508 244-455509 244-455509 244-455512
=MATCH(B2,$A$2:$A$412,0)

We can clearly see that we have a match in rows 2 and 1 columns A and B, but I am getting #NA. I have sorted the columns A-Z as well. I have also tried formatting the columns different ways and I still get #NA.

I need to conditionally format column B if it finds a match in A.

View 9 Replies View Related

Array Formula - Finds Date Then Start Adding Values Until Specified Sum Reached

Jul 23, 2014

I have an Excel workbook with two sheets "DataSheet" and "Actual Peaks", "DataSheet" contains a column with dates and a column with values. "Actual Peaks" has a bunch of dates listed in a column. For each date in 'Actual Peaks', another column goes back to the "DataSheet" finds the date, then starts adding values until a specified sum is reached, once the sum is reached, it returns the date at which the sum was reached. However, I have found that sometimes it is off by a day or two.

See the attached workbook for a much clearer example : Excel_forum help 7-23-14 DD validation.xlsx‎

View 7 Replies View Related

Highlight Duplicate Values In A Single Column

Mar 6, 2013

I created a spreadsheet for use by the shipping department where I work. We are trying to prevent pulling and shipping the incorrect item to the customer. This is how it works. The employee downloads a CSV file containing items that have been purchased from our website and imports the file into the excel. Then the item is pulled and the employee scans the item's barcode into the spreadsheet named "SCAN." Formulas and code on the "reference" sheet look for the SKU number in the list from the CSV file while others create a consolidated list of SKUs that have been scanned, SKUs that have a problem and need to go to customer service, and SKUs from the CSV file that have yet to be scanned. Some of the formulas in this workbook have been borrowed from forums like this and altered to fit my needs - I'll admit I'm not even entirely sure how they work.

Occasionally a SKU is scanned in twice and not always sequentially which will effect the total item count. It can be very difficult to find the duplicates in the list.

I would like for any value that appears more than once in column B of the 'SCAN' sheet to be highlighted. I have tried to do this, but to no avail.

Scan Below
FWD: CS?
If FWD: CS, state reason below:
Status
NOT SCANNED
FWD to CS
SHIPPED

3
4
149

0113MSU1018

[Code] ......

View 5 Replies View Related

Duplicate Values Per Column With Various Row Ranges For Many Columns

Dec 13, 2013

I have a challenge related to a excel sheet we are using for personnel planning.

Vertically we have several projects with action items listed row by row in the following format:

- Project 1 xxxxxx
Project management
Project Engineering
Workshop
Shipping
Etc.
- Project 2 xxxxxx
Project management
Project Engineering
Workshop
Shipping
Etc.

Horisontaly on the columns we have dates, day by day for a year +

For each day we chose from a drop down who is assigned to the action item. The problem is when there are 30-40 + projects and each have 20-30 lines of ation items it is hard to get the overview and avoid double entry. I would use conditional formating to do this, but firstly each project is separated by a line containing different formulas and I would not like the conditional formation to change these cells, and at the same time to put this up manually for each row would take a long time since there are 365 + rows.

how a VBA code could solve this little challenge? IT would also be beneficial to have it do the check upon cell change, that way we would not need to manually run the VBA to check.

View 4 Replies View Related

Deleting Rows With Duplicate Values In A Column

Jun 26, 2009

In Column "C" there is a list of numbers ( these number realte to incidentsm and are called incident IDs) and I want to delete the rows that have duplicate incident IDs.

the row of numbers looks like this ....

View 9 Replies View Related

Code That Only Copies Values

Apr 29, 2009

I need to adjust the code below to copy values only. right now it is copying
format as well.

View 2 Replies View Related

Finds Duplicates In Column And Adds An Alpha Character

May 10, 2009

I have a Macro that finds in Column F duplicates and adds an Alpha Character (A-Z) to the last right position in the filed.(1-12 Alpha/Numeric) .

It's set to check all rows until a specific number of rows are reached. The current code does this until intCount and intRow equals 1500. The number of rows vary in each file.

View 6 Replies View Related

Macro To Delete Duplicate Values But Keep Last One?

Dec 21, 2012

I am looking for some VBA code that will look through a column and delete all but the last duplicate value. The rows are not to be deleted. The duplicate also may not be consecutive (i.e they may appear in rows 2, 3 and 72 - the one in 72 would need keeping).

I did find the following macro which seemed to do the job until I realised it wasn't working if the values weren't consecutive.

Code:
Sub Dupe_Killer_Keep_Last()
Dim lrow As Long
Application.Calculation = xlCalculateManual

[Code]....

View 9 Replies View Related

Removing Duplicate Values From Column - Case Sensitive

May 22, 2013

Suppose I have some data in a column like below

Blue
Red
Green
green
red
RED
BLUE

I need a macro or excel formula so that it will remove duplicate products- case sensitive(removing all duplicate prod using using excel,that i know.) i.e. it should not consider Blue BLUE as duplicate. only consider Blue Blue as duplicate.

So the macro should work same as data -> remove duplicate function already exists in excel, except it will be case sensitive..

View 7 Replies View Related

Excel 2013 :: Populating Column Without Duplicate Values

Jul 14, 2014

I've got a column of client company names and because it is based from accounts, the companies names appear many times. I just need to populate a new column with unique names, so I have found a formula to do this:

=INDEX($A$2:$A$20, MATCH(0, COUNTIF($B$1:B1, $A$2:$A$20), 0))

However when I do this, I CtrlShiftEnter and drag to copy that down, and it's just a copy of the original list - client names are appearing on my new list multiple times. I don't see how this doesn't work... I'm using 2013.

View 1 Replies View Related

Look For Duplicate Values In Entire Column (D) And Then Concatenate Text

May 9, 2013

What can I add to this existing formula to look for duplicate values in the entire column (D) and then concatenate the text of column (K) in each of those rows together?

Essentially I want to string all text in column K together, for each duplicate row of column D with the results in column L.

=IF(D14=D15,CONCATENATE(K14,K15),K14)

View 1 Replies View Related

Copy And Replace Duplicate Values In Column Range?

Sep 18, 2012

I have following code (see below) which finds the duplicates within columns, but I require copying and replacing duplicate values within different row cells, as I am currently finding this task hard to implement.

Input Data example:
Name
Short_code
Lng_code

[Code]....

View 9 Replies View Related

Highlight And Message Box Duplicate Values Over All Worksheets Within Same Column

Dec 4, 2013

I've been looking for a solution to highlight all duplicates within a certain column across all worksheets in the workbook as the entry is made, no button to search for them. I have found bits and pieces, but can't seem to stitch them together to create what I am looking for, still very green with vba.

My workbook is a loading schedule at a warehouse, so there is a tab for each day (the date being the tab name, ex. '12.04.13'.) Tabs are continually added and removed to progress the calendar, and minimize file size. The column I am searching for duplicates in, is column L (or 12, however you wish to identify it.) If a duplicate value is entered, I want at the very least to highlight the value just entered, and the value elsewhere on the workbook, and if possible, have a msg box pop up stating the location of the other duplicate (or at least the tab (date) the duplicate is on.) The message box is more so for an in your face error check, with a built in GPS. Would it also be possible to only search from row 2 to 100, and ignore any further rows on each sheet?

The point of this, is to locate duplicates to make sure an appt has not been double booked, and both entries can be located to verify which entry has the correct information (carrier, delivery appt, etc.)

View 9 Replies View Related

How To Extract Value Into One Column The Duplicate Values From Multiple Cells

May 31, 2014

What i'm trying to do is i would like to compile in 1 column all duplicate values from multiple cells.

ex. A1 to 10 is numbered 1 to 10 respectively, B1 to B10 is numbered 6 to 15 respectively. which means in A1:B10 the duplicate values are 6,7,8,9,10. i could like these number to show automatically in C1 to C5.

View 9 Replies View Related

(UDF) MACRO To VLookup Duplicate Values To Columns

Apr 13, 2013

I need a User Defined Function (UDF) to Vlookup duplicate values in separate Columns.

I can't use an Array function as the data is huge and it takes lot of time to calculate.

I have attached a Input and the desired output in the file attached.

UDF_MACRO.xlsx

View 9 Replies View Related

Delete Duplicate Rows Based On Cell/column Values?

Oct 28, 2009

I have a excel file which contains dublicate rows. The duplicate rows can be identified based on few cell/column values. I need a macro to delete the duplicate rows when the below condition is satisfied: let us consider row 5 and row 6:

If column 7,12,13,16,17,18,19,23,24,27,28,29,30 in row 5 = row 6 then row 6 has to be deleted. This condition has to be followed for all other rows in the excel used range. Have attached the sample workbook.

View 5 Replies View Related

VBA Macro - Compare Two Sheets To Find Duplicate Values?

Jan 14, 2014

I am currently working for data validation team. I have to validate tons of data every week so it would be great if i could remove dupicates.

I want to compare two worsheets, sheet 1 has the order number with description (which i have to find) for the current month and sheet two has got standard report from the past week giving all the order numbers with no description. I need a VBA based macro to find all matching order numbers which are in sheet 1 column A, in sheet2 column A and return the corresponding value in column B in sheet 2 and also return the description in Column C.

View 6 Replies View Related

Find If Duplicate Values Exist In A Column, Concatenate Cells And Then Delete

Dec 17, 2009

I want to do, is search column A for claim numbers that match. When I do have a matching claim number, I want to concatenate the original cells ownership field with the said matching cells ownership field (or move into a column in the same row, I can always concatenate later). Once that is complete, I want to delete the row I took the information out of.

I want to join this data in ArcGIS, but as of right now, it's not a 1-to-1 relationship, so only a relate works. That doesn't help me as I want to display claims by ownership, and this can vary per claim. Company A may have 100% on one claim, and then split another claim 50% with Company B.

This causes a double entry on the claim field in this current spreadsheet I have, which requires me to clean it up by making multiple columns of ownership vs. an additional row for shared ownership.

My problem:

Column A Column B
1235555 Company A (50%)
1235555 Company B (50%)
1235556 Company A (100%)
1235557 Company A (33%)
1235557 Company B (33%)
1235557 Company C (33%)

What I would like to see

Column A Column B Column C Column D
1235555 Company A (50%) Company B (50%)
1235556 Company A (100%)
1235557 Company A (33%) Company B (33%) Company C (33%)

View 3 Replies View Related

Macro That Merges Duplicate Rows Based On Unique Values

Jan 27, 2014

I have a spreadsheet that lists employees and their certifications. If an employee has multiple, then they will show up on as many rows as they have certifications.

The macro I have merges them into one row with a line break, but only the first column's unique value has been merged while the other columns containing their own unique values are duplicated when I want them to show up only once. Example: Jane Doe shows up 2 times on the report. Her name should only show up once on the row, not 2 times with a line break.

Here is the code. I have also attached an example of what I need. Because the attachment is a simpler version of the actual report, is it possible to specify which rows have the unique values and which ones don't?

View 2 Replies View Related

Count Unique Values Based On Duplicate Status In Another Column On Filtered Data

Mar 5, 2014

I am able to quite easily count the number of specific values in a cell after the table has been filtered. However, the problem I have run into is that some times the data needs to be placed into the spreadsheet twice (or to be more specific the same subject is associated with several unique data points).

What I need: some way to count the instance of some give value in column D only once based on the presence of a duplicate (unique) identifier in column C. However, when I filter the entire database, it must count *only* the filtered cells and not the hidden cells as well.

Picture:
Column C Column D
111111 M
111111 M
111111 M

[Code]....

Currently calculates: M=9, F=2

Right now it incorrectly states there are 9 "M" from column D when it really should be 5 since 3 are duplicate values. My main difficulty is making sure this continues to work after I filter the entire sheet (say column ZZ) and have a bunch of hidden cells.

Equation currently using to count only filtered values (in this case "males" and "females"):
="M = " & SUMPRODUCT(SUBTOTAL(3,OFFSET(D3:D13,ROW(D3:D13)-MIN(ROW(D3:D13)),,1))*(D3:D13="M"))

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved