I am working with data and I am trying to identify people that have moved departments using the following criteria, a person are classed as a mover if their:-
Manager AND Dept ID have changed
OR Job Code has changed
OR Status has changed
I have been trying to come up with a formula but just can't get one to work?
i. I currently have a spreadsheet which is used to forecast resource cost for a project. The forecasted cost is calculated on a few factors - rate, allocation, contract start and end date, and expected days worked per month. One of the mods actually helped me out with this a few weeks ago.
I now have been told that there is a possibility that certain resource costs may change in the new year and that will need to be reflected in the sheet whilst keeping the historic information.
For example - XXX has a rate of £200 p/d, allocation is 1, working 18.83 days p/m and is working from 01/01/09 to 01/06/09. The current formula will work out his cost per month until contract end. Now say his rate will be changed to £150 p/d from the 01/03 and all other info remains the same, I need the sheet to calculate his revised cost from 01/03 onwards and not change the calculation previous to that month.
Now Ive actually managed to figure that part out myself by adding in two columns (over-ride rate and over-ride date) using a nested IF statement. The only problem is that if the new rate starts mid month then it will still calcuate the original amount for the full month and the revised amount from the next month.
Edit - Also, could someone advise as to how do I remove my old attachments as I have almost used up my allocation.
I need a way to calculate building rates based selecting the building and the value selected;
I have a list of building construction (fire resistive - protected, non combustible - protected etc)... in cell N8 and the limits in cell O8.
Now what I need to do is calculate the rates in the file attached (cells A5:J21 in my worksheet) based on the building construction and the value/limit I select.
I am trying to run a prestored query in a Access database and popuate the result into a Recordset --- through Excel. So far, I have managed to accomplish that using the code below. However, now I need to update some records in the recordset. The code below does not allow me to do so.
The following message prompted when the code tried to update the record: Run-time error '3251' Current Recordset does not support updating. This may be a limitation of the provider, or of the selected locktype.
This is written for other users who only knows how to create a query in Access. And the users prefer not to import the query results to spreadsheet.
*Someone suggested use Recordset.Open however, that seems to work only with SQL statement but not prestored Queries.
Code:
Sub RunExistingQuery()
'Execute prestored queries in Access
Dim Con As ADODB.Connection
[Code].....
Why this sql query doesn't return values? My excel version is 2007.
Code:
if object_id( 'TEMPDB..#TMPDOC') is not null
begin
drop table #TMPDOC
end
create table #TMPDOC (Code varchar(5) NOT NULL)
[Code] ...........
I have a spreadsheet with early retirement factors;
Years early
1 93.5%
2 87.6%
3 82.3%
4 77.4%
What I'd like to know is if there is an easy way to work out the factors for 1 yrs 1 mth early, 1 yrs 2 mths early, 1 yrs 3 mths early, etc.
In the enclosed SS there are several columns, "A" being Style and "G" being Available. I'm trying to piece together some code that will remove all of a style(all sizes) if the number of stock is less than say 3; however, if any one style has 3 or more available the entire style needs to remain in the spreadsheet.
I've been trying to piece together some code but I don't think I've quite come up with what I'm looking for.
I am making an Excel calculation system where I have two factors (weight and opening length), which is essential for which lift there is possible to use.
There are 8 models each of which may have some limitations in terms of weight, and the opening length:
ModelPushing/pulling Force (KG)Stroke Length (mm)
HCV 130 350
HCV 230 600
HCV 330 800
HCV 430 1000
HCV 550 350
HCV 650 600
HCV 750 800
HCV 850 1000
What I am looking for is a formula, that when you enter numbers in two cells "Weight" and "Opening distance" of what their platform is to meet, then all the models that have the potential to accomplish this task pops up.
Example: A client writing a weight of = 40 kg and opening length of = 450 mm. The formula should then show which model that meets the requirements.
In this case: Models that meet the requirements for the lift.
ModelPushing/pulling Force (KG)Stroke Length (mm)
HCV 650 600
HCV 750 800
HCV 850 1000
I am using Excel 2010 and I am trying to calculate 4 different factors' (columns) values which are numbers. Based on my analysis I will assign the value from 1-5 for each factor and at the end I have to decide the priority (a new column) adding all 4 columns' numbers. My Priority column has three criteria (High, Medium, and Low) but I don't know what formula/function to use and how. I have tried IF function but did not work.
View 9 Replies View RelatedUsing Excel 2013.
I have two sheets in a workbook.
Sheet 1 has the following columns on it, with the following possible values.
People (Dropdown with value between 1 and 8)
Modifier 1 (Dropdown with Text 1, Text 2, Text 3)
Modifier 2 (Dropdown with Text 1, Text 2, Text 3)
Modifier 3 (Dropdown with Text 1, Text 2, Text 3)
Modifier 4 (Dropdown with Text 1, Text 2, Text 3)
Result
Sheet 2
Contains a set of values (Distance) that correspond to the value of the People dropdown (ie. People 1 = Distance 5, People 2 = Distance 6 and a table that looks like the following:
Mod 1
Mod 2
Mod 3
Mod 4
Text 1
0
0
0
0
Text 2
2
0.5
0.25
0.25
Text 3
7
1.75
0.875
0.875
What I want to happen is that the Result field value on table one is the result of:
Distance*(Modifier 1 + Modifier 2 + Modifier 3 + Modifier 4)
For example:
On sheet on I select People = 2, Modifier 1 = Text 3, Modifier 2 = Text 1, Modifier 3 = Text 1, Modifier 4 = Text 1 which I want to result in the following formula:
6*(7 + 0 + 0 + 0)
This might be exceedingly simple, but I just cannot wrap my head around how to do it.
I have an MS Access query that contains a parameter. The parameter is a date field, and I have configured that in the Access query. If I run the query within the MS Access user interface, it prompts me for the paramater value as expected, and runs just fine. However, I want to connect to this query from within Excel as a data source.
I have created a connection to the Access file using ODBC from within Excel. In the MS Query window, I am merely selecting all of the fields resident in the MS Access query, and returning all values. In other words, there is no selection criteria in the MS Query. I have done this many times with Access queries that DO NOT contain a parameter, and everything works fine. However, in this instance, I need to pass a parameter through to MS Access in order for the query to run. At the moment, I get the "Too Few Paramaters...1 expected" error message. This makes sense, because I haven't figured out how to pass the paramater to MS Access.
Is there a way to structure this that does not involve VB code? If so, I'd love to know how. I have tried creating parameters in MS-Query with the same name, but although I get the prompt it doesn't connect with the Access query as the source for the parameter value.
If the solution requires using code, I'm good with VB Code in Excel...is there VB for Excel code that could make this happen?
Failing that, I guess there must be (I've seen a few in my search thus far) Access VB Code that can make this work. I'm very rusty using VB with Access, so this is my least favored solution. However, if this is the only option, keep in mind that I need to pass the paramater ultimately from a user who will initiate the process using Excel.
I need the VBA script in excel that will do a SQL Query, for this case I need to select a value where there are 2-3 tags and between certain period then display the result as a table in a worksheet.
Example I have a database with 3 types of tags "Tag A", "Tag B", and "Tag C", and each tag have a value with different timestamp. the database looks like this:
No. Timestamp Tags Value
1 1-Jan-2010 Tag A 18
2 1-Jan-2010 Tag C 20
3 2-Jan-2010 Tag A 20
4 3-Jan-2010 Tag B 17
5 3-Jan-2010 Tag C 19
6 4-Jan-2010 Tag B 18
7 4-Jan-2010 Tag A 20
8 5-Jan-2010 Tag A 22
9 5-Jan-2010 Tag B 18
10 5-JAn-2010 Tag C 20
I need to calculate data from one sheet 'Promotions' and paste/drag the formula onto the 'Summary Sheet'.
The paste/drag is important to include all data.
Trying to multiply [on sheet Promotions] 'NumberOfPromos' times (*) 'ProfitPerOffer' (using rows 1-8, let's say).
Then paste/drag it in its place on the 'Summary Sheet' in the 'Total Receipts' column.
I've been playing with =Promotions!$E$2:$E$8 * $J$2:$J$8 = 'Summary Sheet'!$F2
and things but cannot get it to work (I know I am WAY off base).
I've been working with Access and trying to duplicate a simple database in Excel.
Attaching a simple project example.
I have a very large pivot table. 1 output is the sum of seconds it takes to complete a task. I would like to convert this field from seconds to minutes. the data is all in seconds, so i need to divid the sum by 3600. is there a way to do this calculation inside the pivot table?
View 1 Replies View RelatedI am trying to use the status of Conditional Formatting to toggle on/off protection for a cell.
I have a cell with Conditional Formatting applied if the result of a formula is true. If the Conditional Formatting is applied, I want the cell protection turned on so a user can not change the entry in the cell. If Conditional Formatting is not applied (false), cell protection is turned off and the user may edit.
I am using Excel 2010 and Vista.
I'm stuck using Excel 2003 to auto-populate a cell.
I have a range of dates in five consecutive columns called:
Phase 1, Phase 2, Phase 3, Phase 4 and Phase 5
I enter the date that 'Phase 1' starts under the first header. Once Phase 2 starts I enter a date under 'Phase 2', and so on to Phase 5.
Each phase is consecutive to the next so will always be filled in from 1 to 5.
I want to create an additional column called 'Status' that shows the Column Title of the last phase with a date in it. For example, if Phase 1 to 3 had dates but 4 & 5 were blank, "Phase 3" would be displayed in the 'Status' column.
I've tried nesting some ISBLANK functions without any luck.
Instead of calculating a time difference manually I want to have a formula do it for me. What I want to achieve goes as followed:
08/06/2006 04:33
12/06/2006 01:05
Time difference is 92:32 [hh:mm]
another example:
09/06/2006 12:42
12/06/2006 11:35
Time difference is 70:53 [hh:mm]
So instead of getting 92:32 and 70:53 by calculating it myself I would like to have a formula do it for me. Otherwise I'll have to invest a lot of time to get the information I need.
I have 4 categories A, B, C & D. These are in desending importance, means A is most important and D is least important. Now there could be many A, B, C & Ds listed in a column. The challange is if coulmn contains A anywhere then the result should be A. If A is absent, then search for B, if present anywhere then display the result as B. It doesn't matter how many times A or any character is listed in column. I am attaching a sheet for better explanation.
View 4 Replies View RelatedI have the data below. I need to total the amount in the USD Equivalent column but there is an exception. Where the "Curr Sold" and the "Curr Sold" are the same in reverse (as highlighted) in yellow, I need to take the net figure. For example below, I need to add the USD Equivalent column but then minus the 6,013,072.66 because the CHF - USD is the same in reverse with the same maturity date.
Maturity DateCurr SoldAmount SoldUSD EquivalentCurr Bought
09/03/2012USD4,000,000.004,000,000.00EUR09/03/2012USD3,500,000.003,500,000.00CAD
09/03/2012USD7,535,000.007,535,000.00CHF09/03/2012CHF5,578,989.356,013,072.66USD
09/03/2012USD2,500,000.002,500,000.00EUR09/03/2012USD2,500,000.002,500,000.00CAD
09/03/2012USD5,000,000.005,000,000.00AUD
I have to make a hierarchy of my employees, taking in consideration the achievemnt of their target. I'll attach a sample to make it simple to understand. The are 2 classes of factors: Class I and Class II.
- In Class I (witch counts 75% in total results) there are:
- New deposit - count 75% from class I
- Insurance - count 10% from class I
- Investments fund - count 15% from class I
- In Class II (witch counts 25% in total results) trere are:
- Loan A - count 15% from class II, but the number have a weight of 40% in results, and volume 60%
- Loan B - count 75% from class II, but the number have a weight of 75%, while volume have 25%
- New clients - count 10% from class II
Now, I have to rank the employees taking in consideration the Deviation for all of the factors above (columns E, H, K, P, Q, V, W, Z).
I need to count, not list, all of the factors of an integer. For instance the number 12 has the following, 1 2 3 4 6 12, so the solution to the NoF(12)=6.
View 9 Replies View RelatedI have a big list with names, money spent and date. I need somehow with a formula to do:
Take all the money spent on some specific day from a specific person an put it into a field.. and this for every date of the week and for everyname... Im gonna upload a photo.
Name
Money
Date
Daniel
5
01.03.2014
[Code] ........
I need the list of the left to produce me list of the right somehow, at least just the sum of everything spent everyday.
Is it possible for a formula to calculate SLA's based on the time its logged on the spreadsheet.
For an example if a spreadsheet is opened and a date of a query logged in cell A1, this date would be 23/01/09. This would then be given an SLA date in cell B1 of 23/01/09. Unless this was inputted on the spreadsheet after 3pm then it would be given a SLA of 24/01/09.
Is there a formula which could do this as we have to manually check around 3pm and manually update all the SLA's.
Sorry it also needs to exclude weekends and bank holidays.
I have column (A) with users names, I want a macro to use column (A) and perform a LDAP query and post results in column (B).
View 3 Replies View RelatedI've been looking on the internet for a spreadsheet that lists the various units of measure with conversion factors to other units. I'm not looking for the formulas, just a chart.
View 3 Replies View RelatedSearching through the forums, I've found a post of daddylonglegs, witch shows how to find the smallest factor of a number:
View 7 Replies View RelatedI was trying to use IF and AND conditions to calculate values for a Col. but when I attempt to sum.
It appears that the value is always "0". Below is my test data.
Col. H Col. J
Qty Result
Row 713 0 <-Excel Formula: =IF(AND(H7>20,H7<=50),"1","0")
Row 825 1 <-Excel Formula: =IF(AND(H8>20,H8<=50),"1","0")
Row 960 0 <-Excel Formula: =IF(AND(H9>20,H9<=50),"1","0")
Row 10Total 0 <-Excel Formula: =SUBTOTAL(9,I7:I9) / =SUM(I7:I9)
I've inherited an SQL server database which imports data from a multitude of spreadsheets each night. Unfortunately the previous data is not deleted from the database or spreadsheets, so there are duplicated records throughout the database. The method they have been using to get data out is to "select distinct", which gets around the problem (not my preferred solution).
I now need to produce an invoice from the database, so I select distinct records for the previous month (based on date) from, say, the TRUCKING table into a TEMP table, so I can do my calculations from there.
But there are a couple of columns which prevent me from getting only unique records. They are the unique ID column and the TIMESTAMP column they have added.
If I try to select all the individual columns, except for the ID and TIMESTAMP, the string length goes over 256 chars and the query truncates.
So I tried "SELECT DISTINCT * FROM TRUCKING WHERE etc etc" but I get the ID and TIMESTAMP fields, which defeats the purpose, and I get duplicate records.
Is there a way to say, for instance, SELECT ALL EXCEPT the fields I don't want?
I have the below code that will do a data dump of an access table into excel based on an SQL query, is there a way to do a select statement that can match against the data in column C on the spreadsheet.
like:
"Select * From Bsmart where Serial_Number = ##[EXCEL COLUMN C1:Lastrow]##
Code:
Dim bkNew As Workbook
Dim cnt As ADODB.Connection
Dim rst As ADODB.Recordset
Dim stCon As String
Dim SQl1, SQL2, SQL3, SQL4, SQL5, varSQl As String
stCon = "Provider=Microsoft.Jet.OLEDB.4.0;" & _
[Code] .....
I am using below code to delete the sheet from workbook.
For iTemp1 = Workbooks.Item(funEach.Name).Sheets.Count To 1 Step -1
Sheets(iTemp1).Select
If UCase(Sheets(iTemp1).Name) "TEMPLATE" And UCase(Sheets(iTemp1).Name) "WORKING" Then
Sheets(iTemp1).Delete
End If
Next
How can i avoid the below popup..
-Data may exist in the sheet(s) selected for delettion. To permanently delete the data press delete.