Excel / VBA Macro To Cycle Through And Update User Data?
Feb 15, 2013
I have a list of Users in Column A on Sheet 2 and a list of Extension Numbers in Column B.
I'm looking for a way to populate a Cell (F5) with a User and Cell (H5) with the Extension number. I then enter Data into Cell (G3), (G9) and (G10). I would then on enter on Cell G10 update the relevant columns in Sheet 2 and move on to the next user.
View 7 Replies
ADVERTISEMENT
Dec 6, 2006
I have one source spreadsheet, where are columns NAME, DATE. I read these data by ADO to other spreadsheet, where I can change/delete data and then run macro for update data in source spreadsheet. The problem: In source spreadsheet is column "NAME" and column "DATE", with values e.g. "Joseph"; 1.1.1980. I read this data to other spreadsheet, then I delete in it value 1.1.1980. When I run macro Update, it messages error.
Sub UpdateItem
...
.Fields.Item(1).value = activecell 'activecell value = "Joseph"
If Not isempty(activecell.offset(0,1)) Then
.Fields.Item(2).value = activecell.offset(0,1).value
Else
.Fields.Item(2).value = "" 'I tried Empty and 0 too but when I read data again then, it displays 0.1.1900, nothing works
End If
...
End Sub
It seems that in source spreadsheet has data in column "Date" format Date and when I try to update data in format String ("") in source spreadsheet by Update macro, it messages error. When I used
.Fields.Item(2).Value = Empty
' or
.Fields.Item(2).Value = 0
after rereading data it displays 0.1.1900 What I want to get is that if the cell with date (in other spreadsheet) is empty, the cell in column Date in source spreadsheet after updating will be blank (contains no values).
View 2 Replies
View Related
Jan 26, 2007
I use a scanner that initiates a f2 command and trips my macro. I would like to use multiple scanners using a 8 port hub but I am having trouble with a scanner starting my macro and another scanner dumping data into my macro before the first one is finished. This is dropping scanned data into my macros. Is there a way to prevent the scan from accepting data until the macro has completed its cycle.
View 2 Replies
View Related
Mar 4, 2014
I've recorded a Macro that goes through multiple spreadsheets and refreshes the pivot tables in the sheets. I would like the Macro to run without it actually showing it go to each sheet and showing the pivot table updating. Bascially I would like the spreadsheet to remain on the first sheet while it's working with all the spreadsheet in the workbook when the macro is running.
View 2 Replies
View Related
Nov 6, 2011
I use Excel 2003 at work. I'm looking for some code that will Open a folder and then lets the user to select a file then continues to run the macro.
The file name they select will look similar to this K2271011.504 or K3011111.201
View 3 Replies
View Related
Mar 29, 2013
I am trying to cycle ALL open workbooks so that I can choose the file to manipulate in subsequent code this is the code that I am utilizing furhter below
this is my code
VB:
For Each wb In Workbooks
If MsgBox("Do you want to do access this Workbook for the Update " & Chr(10) & Chr(10) & wb.Name, vbYesNo) = vbYes Then
wb.Activate
VI_wb = wb.Name
I = True
End If
Next wb
But for some reason it only loops through .xls and xlm workbooks BUT not .xlsx
is there a way that I can loop through any and all open workbooks.
The reason I do this is because my update are based on many numerous excel workbooks with differnet extentions, and naming conventions and many of the come via email, I cannot use the eact naming convention
View 1 Replies
View Related
Jun 23, 2014
I've got a spreadsheet that pulls data from a SQL server.
I'm looking to have a button on the first sheet that extracts the data from SQL and inserts it into sheet 2 of spreadsheet. The data connection from SqL is working fine but when I click on the button sheet 2 is blank.
View 1 Replies
View Related
Jan 28, 2014
i have outlook message stored in my desktop. I want a macro to open that outlook message and update or change the subject name and boby of message. is it possible through macro.
View 2 Replies
View Related
Feb 19, 2008
I have a data set that contains a repeating cycle. I want excel to find the first and second occurrence of the data crossing the zero axis and then report the time between the zero crossings. The data is not purely in ascending or descending order and often just changes from positive to negative or negative to positive without hitting the actual 0 point.
View 3 Replies
View Related
Jan 19, 2013
In Excel 2007.
I have a macro that is set to clear a range of cells. If I make a change to the worksheet (such as adding a column) that moves those cells in the worksheet, the worksheet formulas update, but the macro cell references do not. How can I make my macro update in accordance with changes in the worksheet?
View 3 Replies
View Related
Apr 8, 2012
I am having a graph in ppt which should be updated with a data i have.. i started lyk
Code:
Set xlsApp = CreateObject("Excel.Application")
xlsApp.Visible = True
Dim path As String
path = "C:MydocumentsBook1.xls"
Set newxls = xlsApp.Workbooks.Open(path)
Worksheets(sheet3).Activate
I donno how to update it using vba code in ppt .
View 1 Replies
View Related
May 12, 2013
I am working on a project and would like to see if there is a solution for it. i have a workbook that has data entry that is summarized at a master level but I need to automatically use a formula to update another sheet after clicking an udpate button. The data from the data entry sheet needs to be allocated to all the lines that has the same master item based on the formula. A test workbook is attached ...
View 1 Replies
View Related
Dec 14, 2011
I need to be able to update columns A:H from a file, but then retain the user input information in columns I:L
Import the file into an array, lookup and append I:L data then overwrite?
I need to use this approach in several sheets - import an XLS data file and build a summary, retaining notes used previously
[URL]
View 1 Replies
View Related
Jan 30, 2014
I am trying to create a "Master Sheet" where I enter in the column data and after I have entered my data for each row, I can select the button which toggles the macro to run. I have it built to build new sheets as new clients are obtained. My problem is after I have a sheet that has client's data I cannot get new data to add itself below the data that is already there. I want each client's sheet to keep adding rows as more data comes in. My current macro is :
[Code] .....
Attached File : Data Entry Macro.xlsx
View 3 Replies
View Related
May 7, 2014
I have created a macro that a couple of us can run at the end of the day that looks in a preset folder and has whatever .xlsx files in that append to each other creating one .txt file. It then saves that .txt file and runs a batch file that strips off the .txt file extension. This is the format we need the ending file to be in so we can FTP it to another agency.
Myself and another coworker can run it without any problem and it asks us if we want to save the .txt file before it closes it and runs the batch file stripping off the .txt extension. We say yes and it executes as designed. Another coworker runs it and it looks like the files are appending then the window closes. Never prompts him if he wants to save and the file is nowhere to be found. From what I have researched all his excel settings match ours. We are all running the same OS (XP) and version of MS Office (2007). The part of the macro that seems to just be ignored is below:
[Code] .......
Then the following batch file runs stripping the .txt file extension:
FOR /R "T:Cash ManagementUnsecured\_Team - DisbursAUTOMATIONInput" %%f IN (*.txt) DO REN "%%f" *.
I have tired removing the ActiveWorkbook.Save command thinking it would default to prompt him to save it but it doesn't.
View 2 Replies
View Related
Nov 1, 2011
I would like make a cell in a report auto update with the most recent data entered in another cell from an input table either in the form of a formula or code to ensure that the most recent data is recorded and reported.
View 3 Replies
View Related
Apr 30, 2013
I am trying to create a life-cycle management sheet that is simple for the user but gives specific data.
The user would input "Date", "Machine type", "Component Set No.", and "Component". This would happen over a period of time and build up a picture of how often each component was lasting and it's average life in days.
I am fine from the user input side but am struggling to figure out how to extract ONLY the data I need to display in a graph.
For example: If I want to see the average no. of days "component X" is lasting before being replaced I've not been able to extract just that data. I have tried using a pivot chart but this won't do exactly what I'm after.
See the attached for a clear explanation : Component LifeCycle Example.xlsx
View 5 Replies
View Related
Feb 6, 2014
So I have been trying to plug away at this but am getting no where fast.
I have a set of job numbers on sheet 2 that is pulled from sheet 1, when the job numbers are pulled over it also pulls the due date. The problem I am having is that Sometimes the due date gets pushed out and writing the macro that will pull in the new date
View 2 Replies
View Related
Oct 2, 2009
Here is what I'm trying to do:
On load of userform:
- vba scans sheet and determines what rows are not hidden
- vba updates listbox to show non hidden rows with multiple columns
View 6 Replies
View Related
Aug 12, 2014
I have several workbooks in folder C:Parts &Service where the data needs to be updated with downloaded files in C:extract
I have a macro that allows me to open up a workbook in c:Parts & SVC Sales. One opened I then need to select the appropriate file in C:extract
VB:
Sub Update_Workbooks()
ChDir ("C:Parts & SVC Sales")
Application.DisplayAlerts = False
[Code].....
The are two types of workbooks in C:Parts & SVC Sales "Parts Sales" and "service Sales" . The branch name is at the beginning of the file name
Instead of opening up each file individually in C:Parts & SVC Sales and selecting the appropriate csv file in C:/extract using the Update_Macro, I would like the macro to open up all the files in the directory C:Parts & SVC Sales and update each of these with the appropriate csv file in C:extract
The name and description type must match the csv files and then updated eg Br1 Parts Sales to be updated with csv file Br1 Salesperson 01-07-2014 (the date in the file is not important for match the parts file -the branch name for eg BR1 and "salesperson is) i.e Br1 Parts Sales must select BR1 Salesperson 01-07-2014
BR1 Service Sales Must be updated with Br1 Service order repair register.csv (branch name for eg Br1 in this instance name and Service order repair register (pertain to Service Sales) is important)
Br2 Parts Sales to be updated with Br2 Salesperson
Br2 Service Sales must be updated with Br2 Service order repair register etc
[URL]
View 1 Replies
View Related
Jul 14, 2009
I have a model which I have created a macro for that will do a data dump of the date when I hit 'update' (on BBG Raw Data Tab) to Column A in the 'Data for Pivot' Tab.
This works fine and all of the data comes over, except the last two data points in BBG Raw data (Cell A5055 and A5056) do not come across into the 'Data for Pivot' Tab (these should be going into Cell A5054 and A5055 of the 'Data for Pivot' tab).
View 3 Replies
View Related
Sep 17, 2010
Excel 2007 crashing when trying to up date a data source within a pivot table?
View 3 Replies
View Related
Feb 17, 2010
In the attached example I can't add more than one name at a time without closing the user form. I can edit the list and click the "Save Changes" button and the changes happen. But using the "Add Name" button I can not add more than one name without closing the form, it just overwrites the previous name unless I close the form.
View 2 Replies
View Related
Feb 18, 2009
I have a cell that displays the user name and would like the cell to update whenever the file is opened and display the user. Below shows what the VBA module code. The cell has this formula "=Usrname()".
Function Usrname() As String
Usrname = Environ("username")
End Function
View 9 Replies
View Related
Mar 6, 2007
I was wondering if there was a way that I can have a user only able to edit the worksheet that pertained to them in a workbook of many sheets. So if there was a sheet called "Alicia" and another one called "Love Child"; user Alicia would only be able to update info on the "Alicia" tab and user Love Child would only be able to update their info. Is this possible? Also can this be done for a particular row in a spreadsheet? So if row 3 has Alicia's info, she's only allowed to update the info on that row.
View 3 Replies
View Related
Dec 29, 2007
I need a code for vinculating a user form and perform some searchings on a excel database.
For further details see attached file.
I created a user form in which some infromation is requested in order to search on excel database, I need a macro to search, display and update this data/information.
As an example, if i need to find the part number "C23138810-1" using the button search database and contains or match options, then displays all the information on the user form, this information is located in the same row where the part number is. Then, if some change is required, update is by clickig button "Update Data", and then if require "find next" item to review or update.
View 9 Replies
View Related
Jul 11, 2012
I have an excel file with multiple sheets. I want my HR team to update that file, but one user shouldnt see the entries of other users. I want to make a consolidated file out of three files. This excel template is for salary input.
View 3 Replies
View Related
May 24, 2012
In the spreadsheet shown below I would like the user to select a project via a dropdown list in cell B2 which is from the data set shown in row 7 downwards. Then based on the project they select, they need to be able to see all of the locations associated with that project and choose in B3. Finally they then need to be able to select a team which is associated with the project & location combination chosen in cells B2 and B3.
Excel 2007
ABC2
Project3Location4Team56ProjectLocationTeam7Project 1PerthTeam 18Project 1MelbourneTeam 29
Project 1SydneyTeam 110Project 1Brisbane Team 111Project 1Brisbane Team 312Project 1DarwinTeam 413
Project 1DarwinTeam 514Project 2PerthTeam 315Project 2PerthTeam 416Project 2MelbourneTeam 117
Project 2MelbourneTeam 218Project 2SydneyTeam 419Project 2Brisbane Team 6
View 9 Replies
View Related
May 27, 2014
User form data entry.
I need to save the data of For Eg. A form in Sheet 1, B form in Sheet 2, C form data entry in sheet 3.
what is happening now is that, all the entries are going in the Active Sheet that is open in the excel file. I want to automate the process of data entry, by making it enter data from specific form in specific sheet.
1st form
Code:
Private Sub CommandButton1_Click()
eRow = Sheet1.Cells(Rows.Count, 1).End(xlUp).Offset(1, 0).Row
Cells(eRow, 1) = ComboBox1.Text
Cells(eRow, 2) = TextBox12.Text
Cells(eRow, 3) = TextBox2.Text
Cells(eRow, 4) = TextBox3.Text
Cells(eRow, 5) = TextBox4.Text
Unload Me
ThisWorkbook.Save
End With
End Sub
2nd form
Code:
Private Sub CommandButton1_Click()
eRow = Sheet2.Cells(Rows.Count, 1).End(xlUp).Offset(1, 0).Row
Cells(eRow, 1) = ComboBox1.Text
Cells(eRow, 2) = TextBox14.Text
Cells(eRow, 3) = TextBox2.Text
Cells(eRow, 4) = TextBox3.Text
Cells(eRow, 5) = TextBox4.Text
Unload Me
ThisWorkbook.Save
End Sub
View 2 Replies
View Related
Mar 7, 2013
I have a worksheet designed to look like a form. That worksheet pulls data from an "Application Data" worksheet using INDEX and MATCH formulas. That part works great. The user enters an Application number on row 8 and it populates all of the other cells. In fact, in cell O7 (not pictured), I have it generating the row number the data came from (based on a MATCH function).
Here's my question--if they go in and change a value in one of the other cells, they should be able to press an "Update" button. That will then kick off a macro that goes to the "Application Data" sheet, finds the row that has the Application Number (from row 8) and updates the values based on what the user entered on this form.
How do I write the statement that selects the row based on the Application Number?
View 5 Replies
View Related