So I have been trying to plug away at this but am getting no where fast.
I have a set of job numbers on sheet 2 that is pulled from sheet 1, when the job numbers are pulled over it also pulls the due date. The problem I am having is that Sometimes the due date gets pushed out and writing the macro that will pull in the new date
I have one source spreadsheet, where are columns NAME, DATE. I read these data by ADO to other spreadsheet, where I can change/delete data and then run macro for update data in source spreadsheet. The problem: In source spreadsheet is column "NAME" and column "DATE", with values e.g. "Joseph"; 1.1.1980. I read this data to other spreadsheet, then I delete in it value 1.1.1980. When I run macro Update, it messages error.
Sub UpdateItem
...
.Fields.Item(1).value = activecell 'activecell value = "Joseph"
If Not isempty(activecell.offset(0,1)) Then
.Fields.Item(2).value = activecell.offset(0,1).value
Else
.Fields.Item(2).value = "" 'I tried Empty and 0 too but when I read data again then, it displays 0.1.1900, nothing works
End If
...
End Sub
It seems that in source spreadsheet has data in column "Date" format Date and when I try to update data in format String ("") in source spreadsheet by Update macro, it messages error. When I used
.Fields.Item(2).Value = Empty
' or
.Fields.Item(2).Value = 0
after rereading data it displays 0.1.1900 What I want to get is that if the cell with date (in other spreadsheet) is empty, the cell in column Date in source spreadsheet after updating will be blank (contains no values).
I am working on a project and would like to see if there is a solution for it. i have a workbook that has data entry that is summarized at a master level but I need to automatically use a formula to update another sheet after clicking an udpate button. The data from the data entry sheet needs to be allocated to all the lines that has the same master item based on the formula. A test workbook is attached ...
View 1 Replies View RelatedI am trying to create a "Master Sheet" where I enter in the column data and after I have entered my data for each row, I can select the button which toggles the macro to run. I have it built to build new sheets as new clients are obtained. My problem is after I have a sheet that has client's data I cannot get new data to add itself below the data that is already there. I want each client's sheet to keep adding rows as more data comes in. My current macro is :
[Code] .....
Attached File : Data Entry Macro.xlsx
I have several workbooks in folder C:Parts &Service where the data needs to be updated with downloaded files in C:extract
I have a macro that allows me to open up a workbook in c:Parts & SVC Sales. One opened I then need to select the appropriate file in C:extract
VB:
Sub Update_Workbooks()
ChDir ("C:Parts & SVC Sales")
Application.DisplayAlerts = False
[Code].....
The are two types of workbooks in C:Parts & SVC Sales "Parts Sales" and "service Sales" . The branch name is at the beginning of the file name
Instead of opening up each file individually in C:Parts & SVC Sales and selecting the appropriate csv file in C:/extract using the Update_Macro, I would like the macro to open up all the files in the directory C:Parts & SVC Sales and update each of these with the appropriate csv file in C:extract
The name and description type must match the csv files and then updated eg Br1 Parts Sales to be updated with csv file Br1 Salesperson 01-07-2014 (the date in the file is not important for match the parts file -the branch name for eg BR1 and "salesperson is) i.e Br1 Parts Sales must select BR1 Salesperson 01-07-2014
BR1 Service Sales Must be updated with Br1 Service order repair register.csv (branch name for eg Br1 in this instance name and Service order repair register (pertain to Service Sales) is important)
Br2 Parts Sales to be updated with Br2 Salesperson
Br2 Service Sales must be updated with Br2 Service order repair register etc
[URL]
I have a model which I have created a macro for that will do a data dump of the date when I hit 'update' (on BBG Raw Data Tab) to Column A in the 'Data for Pivot' Tab.
This works fine and all of the data comes over, except the last two data points in BBG Raw data (Cell A5055 and A5056) do not come across into the 'Data for Pivot' Tab (these should be going into Cell A5054 and A5055 of the 'Data for Pivot' tab).
away to have a cells formula only up date via a Macro
Example
A1+B1 = C1
the formula is only done through a Macro so that if it is disabled C1 would be empty?
I guess the trick is how does the macro update when a value is entered in A1 or B1?
I have a list of Users in Column A on Sheet 2 and a list of Extension Numbers in Column B.
I'm looking for a way to populate a Cell (F5) with a User and Cell (H5) with the Extension number. I then enter Data into Cell (G3), (G9) and (G10). I would then on enter on Cell G10 update the relevant columns in Sheet 2 and move on to the next user.
I need a code for vinculating a user form and perform some searchings on a excel database.
For further details see attached file.
I created a user form in which some infromation is requested in order to search on excel database, I need a macro to search, display and update this data/information.
As an example, if i need to find the part number "C23138810-1" using the button search database and contains or match options, then displays all the information on the user form, this information is located in the same row where the part number is. Then, if some change is required, update is by clickig button "Update Data", and then if require "find next" item to review or update.
I have a macro written that pulls data off another workbook and places it on a sheet on the my main workbook. The macro is set to auto filter based on whats in Column 1. The code for this is below:
ActiveSheet.Range("$A$1:$AE$46303").AutoFilter Field:=1, Criteria1:= _ "201504"
Now what I was wondering is there a way for it reference say cell I12 on sheet2 in the main workbook and pull that data instead when the macro is run via a button. The number listed is a date code so say we change it too "201503". I would like to pull all those dates instead of the ones for "201504".
I have a worksheet designed to look like a form. That worksheet pulls data from an "Application Data" worksheet using INDEX and MATCH formulas. That part works great. The user enters an Application number on row 8 and it populates all of the other cells. In fact, in cell O7 (not pictured), I have it generating the row number the data came from (based on a MATCH function).
Here's my question--if they go in and change a value in one of the other cells, they should be able to press an "Update" button. That will then kick off a macro that goes to the "Application Data" sheet, finds the row that has the Application Number (from row 8) and updates the values based on what the user entered on this form.
How do I write the statement that selects the row based on the Application Number?
I have not used an event macro before and am trying to one update a cell when changing a cell. I am basically copying a number to another cell that is an input for a calculation and then returning the calculated value back. How do I reference r69 in the code to start the event macro?
View 2 Replies View RelatedTrying to get this macro to auto-run after the referenced cell is changed:
Sub Headerdata()
ActiveSheet.PageSetup.RightHeader = Range ("d1").Value & Range ("e1").Value
End Sub
I got it to work in one book but it won't work in any other book...
I have used the function = now() to have the most updated time but it updates a workbook when I open it in the first place. How I can avoid this?
View 9 Replies View RelatedI have attached excel with the logic I am using, but I have a problem and needed logic to update to make sure it is not inserting same data (duplicate data).
Please update the logic so that if it is having same data in sheet 3 it should not insert or delete duplicate.
Code:
Public Sub CopyData()
Dim ws As Worksheet, bi As Byte, vData(1 To 9), bi1 As Byte, vData1(1 To 9), bi2 As Byte, vData2(1 To 9), bi3 As Byte, vData3(1 To 9), bi4 As Byte, vData4(1 To 9)
Set ws = Sheets("Sheet2")
For bi = 1 To 9
[Code] .........
In Excel 2007.
I have a macro that is set to clear a range of cells. If I make a change to the worksheet (such as adding a column) that moves those cells in the worksheet, the worksheet formulas update, but the macro cell references do not. How can I make my macro update in accordance with changes in the worksheet?
Let's say that in column A I have numbers,"Yes" and "No". I want in column B to have only the numbers from column A, in the same order without any empty ranges, and everytime I add in column A a new number, column B to update automatically with that number. Let's have an example:
A B
Yes 12
12 13
No 10
13
No
10
Yes
And if I want to add in column A:
A B
Yes 12
12 13
No 10
13 25
No 15
10
Yes
25
15
So the column be will update automatically. I already tried =IFERROR(INDEX($A$1:$A$10,SMALL(IF(ISNUMBER($A$1:$A$10),ROW($A$1:$A$10)),ROWS(B$1:B1))-ROW($A$1)+1),") but using this many times get's my file very heavy and the excel is working slow.
I have a pivot table whose data source is located on a shared network drive. Each day a new data source is uploaded and the only thing that changes is the date in the filename (ie. DataSource080813.xlsx). I am trying to find a way to set the data source to update with todays date automatically each day so that when you open the workbook it is always current days data. I have a cell (B2) with a formula in it that gives me the file location of todays file (ie. X:TeamFolderFile1DataSource080813.xlsx, where the date is derived using the TODAY() function. Is there a way to set the pivot table data source to cell B2 and have it use the text from B2 as the file location?
View 1 Replies View RelatedI would like make a cell in a report auto update with the most recent data entered in another cell from an input table either in the form of a formula or code to ensure that the most recent data is recorded and reported.
View 3 Replies View RelatedI have a big spreadsheet that has 30 columns. The data is downloaded from an SQL database from time to time. The row identifying data ( the record number/key ) is in the left most cell. I often have to move over 10 to 20 columns to view some other data in the same row. I can do this by selecting the preset Excel row number which higlights the whole row and then use the lower slider bar to go to the correct column to view the data.
However if I wish to select an item of data ( or update a particular cell ) then I loose the highlighting for that row and I can "loose" which row I am on. ( maybe I'm stupid but it does happen ) Can I use Conditional formatting to highlight a row whenever I alight on any data in that row and it sttays highlighted until I select another value on another row?
I have a basic formula =C17+'Asset Depreciation 2008 Onwards'!C24, and I want to copy it down just using the drag function. Problem is that the second reference range of cells are in rows and hence when I copy it down it doesn’t automatically update the cell references because it want to update them by column number instead of row number. IE I want it to display =C17+'Asset Depreciation 2008 Onwards'!
D24, instead of C25. Do you know if there is any way of telling Excel that I want it to increase the column number by 1 every time, instead of the row number for this part of the formula?
I have a worksheet in which I have a worksheet_change macro. This worksheet_change macro makes sure that a few cells will keep their colors, even if the user copies and pastes a new value to that cell. This worksheet_change macro runs each time there is a change on the worksheet. Now my problem is that on the same sheet I have an update list macro which updates around 20.000 rows and two columns (which is alltogether around 40.000 values) and it takes a while to run. So.. it takes a loooooooooot of time (too much) when these two macros both run.
My question is that can I somehow disable the worksheet_change macro while the update list macro runs. I mean something like when I start the update list macro to disable worksheet_change macro and when the update list macro finishes, then reenable worksheet_change macro?
I want the script to find if the value entered in the form is matching the values in column 'A' in the database and if it matches then it needs to select the cell as active cell - to populate the form details. And if there is no matching value found, the script needs to select the last empty cell of the column 'A' to populate the data entered in the form.
1) Form has 10 different fields that needs to be filled by the user.
2) Field 1 - is a text box for 'Request #' to be entered by the user.
3) After filling in all the fields - once clicked on OK, the form should search for the the 'request #' entered on the form in the database (Form and the database are in the same workbook).
4) If the 'Reqeust #' in the Column 'A' matches the the 'Request #' entered in the form, then the matching cell should be selected (Activecell -Were the data can be overwritten, with the new entry)
5)If there is no matching 'Request #' found in the database, the script should loop to select the next available blank cell in column 'A'. So that the form data can be entered.
I need to be able to open a workbook named "Cost Price List" and press an update button which will open Another workbook called "Numerical Pricelist" that will then look up the part number of the item and change the corresponding description only, using the "Numerical Pricelist as the correct master document. There are approx 5000 part Numbers but i have cut a small sample section.
View 9 Replies View RelatedI have multiple graphs that read from rows varying in length from 2 to 60 columns long, depending on user input. I need help in creating a macro that readjusts the graphs to read from smaller/larger data set.
I created one that said: If user input = 1, then set graph to (A1:A1), If user input = 2, then (A1:B1), but this is really inefficient. Is there a better way?
i have this macro that sorts out a few cells
View 4 Replies View RelatedI am trying to update a text box from a macro. The text box is outside of the chart area. I am using these two lines and it is not working.
Sheets("chart1").Select
ActiveSheet.Shapes("Text Box 2").Text = strSql ' a string variable
I have a macro that is supposed to update 3 pivot tables with the change to just the first one but it doesn't work. Can anyone help?
Here is my code but nothing happens when I change the first pt (C & S). It doesn't update the other 3 tables.
Private Sub Worksheet_Calculate()
Dim PF1 As PivotField
Dim PF2 As PivotField
Dim PF3 As PivotField
Dim PF4 As PivotField
Dim x As String
Application.EnableEvents = False
Application.ScreenUpdating = False
Set PF1 = ActiveSheet.PivotTables("PivotTable4").PageFields("State")
Set PF2 = ActiveSheet.PivotTables("PivotTable3").PageFields("State")
Set PF3 = ActiveSheet.PivotTables("PivotTable2").PageFields("State")
Set PF4 = ActiveSheet.PivotTables("PivotTable1").PageFields("State")
x = PF1.CurrentPage
PF2.CurrentPage = x
PF3.CurrentPage = x
PF4.CurrentPage = x
Application.ScreenUpdating = True
Application.EnableEvents = True
End Sub
Pivot Table 4 = C & S this is one I want to make the change to
Pivot Table 3 = Sales Pivot
Pivot Table 2 = 2005 Pivot
Pivot Table 1 = SMG Pivot
I have three columns as below,
Column A current Amount
Column B Increse %
Column C Revise Amount
If I put revise amount in column c, than Column B update automatically or if I put % in column B than column C update automatically, update must be live
I have a spreadsheet of 30 or so tabs, all of identical layout, with columns B to AS used. Each day I have to drag a row down to collect data from various other spreadsheets, on each of the 30 tabs (different data in each tab, but same format), i.e. today I dragged down B216:AS216 down to B217:AS217 for all 30 tabs. I could record a Macro on the first tab and then play it for the remaining 29, but I have to record the Macro each day so it drags down the next row down.
I am after a Macro that will drag down the columns to the current date (which is in column A and is already entered down to the end of the year) on all tabs, so if I left it for 5 days etc, and then ran the Macro, it will drag down 5 rows. But if I had to run it 5 times that wouldn't matter. A button on the first sheet would be brilliant too, meaning I could open it up, click the button, and then all 30 tabs would drag down to todays date.
