Execute Macro Depending On User?
Sep 29, 2011I need to execute a macro (just a simple "msgbox") but only if a specific user (or users) have opened the file.
View 1 Replies
ADVERTISEMENT
Inscribing Cells: Run A Macro On Enter Keypress, That Would Execute Different Code Depending On That "inscription" That Would Be Invisible To User
Feb 20, 2007Is there any way to "Inscribe" a cell? I would like to run a macro on Enter keypress, that would execute different code depending on that "inscription" that would be invisible to user. I could use some properties of . Validation property like this:
Private Sub EnterPressed
'following code to ensure proper functioning of Enter in any other Worksheet
If ActiveSheet <> mySheet 'MySheet is global Variable then
ActiveCell.Offset(1,0).Select
exit Sub
End If
'now the real code
If ActiveCell.Validation.InputMessage = "1" Then
ActiveCell.Offset(0,1).Select
Else
'something else
End If
End Sub
The problem is, I use Data Validation and Conditional Formatting, so can't use any of these properties.
Displaying Sheets Depending On User
May 9, 2004Possible to write code to hide selected sheets in an excel file depending on which user is using the file i.e. hiding sheets that are not applicable to that person while just showing the applicable sheets?
View 2 Replies View RelatedChange From Execute On Selections To Execute On All
Feb 28, 2014I have the following code:
[Code] .......
What do I need to change in order to make it execute the Call statement on EVERY item in the ListBox2, not the Selections.
Combine Two Tables Which Change In Rows Depending On Input Of User Using VBA In Excel?
Apr 13, 2014i have a macro which takes the results generated and puts them into a table and filters the data so that zeros does not show and arranges the table from largest to smallest. Now i have a problem where i need to select the power, fuel oil consumption, weight and area from one table and the other power, fuel oil consumption, weight and area from the other table and combine them together so that i can have all possible combinations of the data, but i don't want the zeros to show in the combinations. i need the combined data to show on a separate sheet. The data of table 1 varies with rows as shown:
The Data of Table 2 varies with rows as shown:
I would like to achieve a result like this in the following columns and rows without having to input them manually:
Add-In Will Not Execute Macro - CustomUI
Feb 24, 2014Attachment 299651
I have turned a Workbook with Macros into an add-in. The macros work perfectly for the intended purpose: copy selected data in a special way and put it into an e-Mail message.
I used the CustomUI Editor to assign a macro to a Ribbon button.
However, when I turn it into an add-in and click the Ribbon button, it doesn't work on my machine or any other machine, with an error that says "Cannot run the macro 'CreateListofInventory'. The macro may not be available in this workbork or all macros may be disabled.
My macros are not disabled, and the add-in doesn't even work in the book where the macros reside.
Execute A Macro From Within A Formula
Jan 13, 2010I coudn't find anything on this forum on this subject.
Is there a way to execute [trigger] a macro from within a formula?
e.g. Based on an IF statement result, execute macro1 if true or macro 2 if false?
modytrane
Macro To Execute F2 Function Key?
Feb 3, 2003I need a macro that will execute the F2 function key so that the cell can be edited.
View 7 Replies View RelatedMacro To Execute Certain Key Combination
May 18, 2009How do I let a macro execute a certain key strok combination, such as Alt, D, G, H?
(Didn't really know what to search for...)
Facility To Execute Macro
Oct 29, 2006Is is possible to have a button or a box of some sort that the user of a spreadsheet can click to execute a piece of vba code that I have? If so, can someone tell me how to insert such a button?
View 2 Replies View RelatedMacro To Open And Execute A Macro From Workbook
Jul 20, 2003Is it possible to use a macro to:
1. Open Excel from the Desktop
2. Open a workbook
3. Execute a macro from this workbook
If so, how can it be done, specially point 1?
Execute A Macro In All Files In A Folder
Apr 22, 2009I found the following code to execute a macro in all excel files in a folder. Sounds amazing! I have a code to add to it, however I am having issues getting it to work. take a look at it and let me know what (more like, how many things). I am adding this to the Sheet 1 Worksheet.
View 3 Replies View RelatedMacro That Will Execute Command For Excel Add-in
Oct 1, 2012I would like to add a command to my macro that will do one simple step: Refresh all FDS Codes
FDS I believe is short for FactSet Data Series. FactSet is an add-in for excel we use at work. The FactSet menu button is in my ribbon and when I choose that add-in, there are a number of actions I can execute. One is to refresh all FDS which is to refresh all cells with formulas that pull in data from our FactSet database.
I tried recording this action but VBA does not show any key strokes from those steps so I think I just experienced one of the many shortfalls of recording macros. Is there a way to write the macro to execute this action? I would think since I am using a FactSet add-in, it would be possible but I don't know where to begin.
Mouse Over A Cell Execute A Macro
Feb 2, 2009On my worksheet, i want to execute a macro to calculate and display some informations when the mouse is positioned over certains cells. I look around but did not found how to do it.
I want the information to be displayed above that cell and disapeared when mouse pointer moved away.
Macro Execute When Form Is Changed
Aug 17, 2009How do I have a macro execute anytime a checkbox, or radio button is clicked on a form? I have a macro that needs to run, but I don't want to put it in the code for every checkbox because it will complicate any changes or additions to the form.
View 9 Replies View RelatedMsgBox With Yes/No & Only Execute VBA Macro If Yes Chosen
May 9, 2009How would I add a YesNo MsgBox to my existing macro that I have set up through a commancd button? I would like the user prompt to ask the following ? ---> "Would you like to move the data sheet forward 1 week?". Then if "Yes" is selected, run the following macro. If "No", end the subroutine.
Private Sub CommandButton6_Click()
Range("M7:BL156").Select
Selection.Copy
Range("L7").Select
ActiveSheet.PasteSpecial Format:=3, Link:=1, DisplayAsIcon:=False, _
IconFileName:=False
Range("I4").Select
ActiveSheet.Range("L6").Value = Range("L6").Value + 7
End Sub
Creating Macro Dynamically On Keypress And Execute
Apr 1, 2014creating macro dynamiccally on keypress and execute it
i have 3 excel sheet sheet1, sheet2, MasterSheet
MasterSheet conatins the following
COLUMN A COLUMN B COLUMN C
Colorcode FLAG SKEYS
RGB(121,223,214) A Ctrl+a
RGB(125,228,114) B Ctrl+b
[code]....
I have 3 columns column 1 contains colorcode in RGB format column 2 Contains FLAG and column 3 contains SHORTCUT KEYS
i have a macro in sheet1 & sheet2 for coloring the backgrouf color of the selected rows in sheet1 or sheet2
Code:
Sub Macro_color()
With Selection.Interior
.Pattern = xlSolid
.PatternColorIndex = xlAutomatic
.Color = RGB(234, 241, 221)
.PatternTintAndShade = 0
End With
what i need is when th user presses say Ctrl+c , RGB(233,129,220) from the MasterSheet needs to be copied in the macro as .Color = RGB(233,129,220) instead of RGB(234, 241, 221) and the selected row in sheet1 shld be colored. how can it be done
1 Macro To Execute Multiple Macros On Different Worksheets
Nov 17, 2006Is it possible to create 1 macro which will execute multiple macros on different sheets?
I have approx. 12 macros that I can run in order, and I would like to create 1 button on the first sheet of the workbook to execute all 12 macros, which are contained on various other sheets. Is this possible?
When I attempted to do this, the master macro ran an odd function on my first sheet.
Code For Specifying Cells So That Copying And Pasting Macro Will Not Execute There
Feb 20, 2013I've attached a sample workbook in which there are 3 macro-buttons.
The buttons will paste a shape in the active cell. So this means the buttons themselves could be deleted and replaced with a shape.
Since locking and then protecting the cells disables the macros, how can I amend the code to make sure the buttons' cells are protected from the copying and pasting macros? Or, how do I ensure that the macros only work in A1 - E5?
Excel 2010 :: Execute Macro - No Response From Message Box
Mar 21, 2014Below is some code that I found on the internet some while ago. When Excel opens this code runs which brings up a message box prompting a user to select an option. If no option is selected within 15 seconds then the macro runs, else it depends on the selection entered.
The problem that I am experiencing is that sometimes when the user does not select an option the macro does not execute after the coded 15 seconds. The message box just sticks around until a selection is made.
Most of the time it works just fine... some of the time it doesn't. The problem would appear to have gotten worse since upgrading to Excel 2010.
So, my question is either:
1. Why the code does not execute as expected each time Excel is opened?
2. Is there a better / more robust way of executing the below code without using "shell"?
[Code] ......
Excel 2010 :: Execute Statement ONLY When Macro Run From Button
Aug 27, 20121) I have a VBA macro MyMacro() which works fine.
The macro is assigned to a button on the w/s, and also runs from w/b Open() event and other locations within the w/b.
2) The macro displays a message just before exiting whenever it is called.
3) I’d like the MsgBox statement in the macro to be executed ONLY when the macro is run from the button.
In other words, skip the MsgBox statement when the macro is run from anywhere else in the VBAProject.
Can this be done ? possibly by inserting a statement or two before MsgBox in the MyMacro() code ?
Customize Excel Ribbon And Add Button To Execute Multiple Macro
Apr 4, 2013How to add the macros in existing excel ribbons.
For example - I have a two macro codes. One is change the Date Format from DD.MM.YYYY to MM/DD/YYYY and another one is Date Format from MM/DD/YYYY to YYYYMMDD.
I want to execute the macro from the customize ribbon through Add in Buttons.
See the attachment : Customize the ribbon with Macro code.jpg
Using Macro To Open Specific File And Execute VLookup Function
Oct 5, 2012I have to run a report each morning and in once cell I need to pull in the contents of another cell from another worksheet. I'd rather not have to open the additional file each morning to copy and paste special the values so I'd like to add to my current macro to pull this data in automatically. I have to do this for two different reports/portfolios and the data I am pulling in for each portfolio is located in the same exel file but under two different tab names, the portfolio names 2010 and 2045.
Deliverables
The spreadsheet I am pulling data in from is located here:
K:Risk OversightMarket RiskTracking ErrorBARRA
and the file name is: Daily Barra Tracking Error.xls
Tab name would be 2010 for the 2010 portfolio or 2045 for the 2045 portfolio The vlookup will be from "A32:B2500" and I would like to incorpoprate an IFERROR function that returns "" in the event of an error. Column "A" are dates and column "B" is the data I need to pull in.
Receivables I am pulling the data into cell "J23" of a summary report (sheet 2) and would like the vlookup to read something like this:
IFERROR(VLOOKUP("K1"Active.Workbook.Sheets2,[K:Risk OversightMarket RiskTracking ErrorBARRA"&"Daily Barra Tracking Error.xls"(Sheets)]."2010""A32:B2500",2,0),"")
This should return a blank cell if the date cannot be found in the data spreadsheet and return the correct data for teh correct date being referenced in my summary sheet.
how to do the bracketed parts for pulling in the right spreadsheet and tab.
Compile Error: Invalid Outside Procedure (execute Macro On Pivot Refresh)
Jan 27, 2009I keep getting this error:
"Compile Error: Invalid outside procedure"
What I am doing is having a macro execute every time my Pivot table is refreshed, the macro invokes a format change.
Clear Data Depending On User Input And Move Cells Forward Without Deleting Data Table
Oct 25, 2012I have an month input in cells B2 (user can enter values from 1-5)
I then have a data table that has month 1,2,3,4,5 running across range G9:K9. the data is held in range G10:K19.
So if user types in 4 in B2, what should happen is that months 1,2,3 and 4 the data for these months should be cleared and data in month 5 moves forward into month 1.
So basically, anything left of the month entered is B2 should be cleared and replaced with anything right of the month in B2.
1
2
3
4
5
£11
£133
£29
£193
£100
[Code] ........
Menu Pathing (execute The Macro From Menu)
Jul 2, 2009I'm adding a menu selection to the right-click menu that you get for cells. I can add and remove the menu option but, when I try to execute the macro tied to the menu, I get "the macro...cannot be found". I can't figure out what appears to be a "pathing problem". I'm sure it's simple but...
Here's the
Use Same VBA Macro Depending On Cell Name
Jan 30, 2014[Code] .....
But what I want to do now is to strikethrough to eliminate unwanted data when a particular option is selected from the drop down list. In this case ( If User choose "Mens" for Gender, and NOT "Pants", Then Strike though the Result "NIKE". This works for the template in column E only using this code.
[Code] ...............
I tried to modify this like
[Code] ...............
So that every time x changes, the condition changes, but it seems like I cant do, Range("NIKE_" & x).
Attached File : Test1-2ed.xlsm
Insert Formula Depending On Cells Depending Of Variables?
Jan 27, 2014 In a macro I want to automatically insert a formula in several cells. The formula depends on other cells, and I want to be able to manipulate these cells with variables. Here is my code:
[Code] .....
All my variables are declared:
Sheets("DATOS YTD 2014").Cells(I, Semana + 1) is the cell I want to be able to chose due to the variables
Sheets("DATOS YTD 2014").Cells(I, 3) is the reference cell for the VLOOKUP formula, that will vary with I
SheetMonth.Range("B3:W172") is a range in the sheet SheetMonth which is fixed
The error message I receive is the following: "Run-time error 13, Type mismatch"
I precise that the next step is to make the ",6," part in the vlookup formula also variable... but I guess once my current issue is solved this one will be a piece of cake.
Macro - Selecting Row Depending On Cell Value
Mar 8, 2013The purpose of the excel sheet is hour administration. In the first page you fill in which group it is about, what week it is about and the amount of hours to change.
There are several other sheets named after the group that are filled with some kind of agenda.
An example: I want to make a change to the amount of hours group X will be there in week 3. I fill out the 3 columns (Group, Week, Hours) and hit a button. It should now check those 3 columns for data and modify the hours for the correct group. It is not done yet but I'm running into a problem already, the function I use to find the row with the correct weeknumber in the Group sheet returns wrong numbers and I don't know why.
VB:
Private Sub CommandButton2_Click()
Dim Week As Integer
Dim WeekRow As Long
Dim Groep As String
Dim Uur As Integer
[Code] ....
What I am expecting to happen is this: It checks A1, B1 and C1, selects the correct sheet, executes the function FindRowByValue (the week number is in column B) and fills Week Row with the result, then returns to the original sheet, gives a debug message and repeats this 5 times.
The debug message shows that the Week Row is not returning the row with the week number I filled in but instead returns either the week number itself (so if I wanted to find week 5 it returns a 5, while week 5 is in row 28), or a different number that is incorrect.
Macro Disabled Depending On Cell Value
Sep 24, 2009I was wondering if it is possible to prevent a macro from running depending on what value is in a specified cell.
I have a huge excel sheet and a commandbutton that runs a bunch of macros in order to generate a report.
I want to force the user to select a specific project before all the macros are run. Just making the report for a specific project only takes a few seconds but if no project is selected then it runs throught the whole database and it takes forever.
I have set up a cell that changes value depending on wether a project is selected or not. I have placed the cell in the -ForMacros- sheet. Now is it possible to write some code into the commandbutton that halts the report generation + displays a warning box telling the user to select a project first?
What values used to determine wether the macro runs or not doesnt matter to me. Whatever is easier for you
I have attached a sample workbook for you to work on.