Excel 2010 :: Execute Statement ONLY When Macro Run From Button
Aug 27, 2012
1) I have a VBA macro MyMacro() which works fine.
The macro is assigned to a button on the w/s, and also runs from w/b Open() event and other locations within the w/b.
2) The macro displays a message just before exiting whenever it is called.
3) I’d like the MsgBox statement in the macro to be executed ONLY when the macro is run from the button.
In other words, skip the MsgBox statement when the macro is run from anywhere else in the VBAProject.
Can this be done ? possibly by inserting a statement or two before MsgBox in the MyMacro() code ?
View 4 Replies
ADVERTISEMENT
Apr 4, 2013
How to add the macros in existing excel ribbons.
For example - I have a two macro codes. One is change the Date Format from DD.MM.YYYY to MM/DD/YYYY and another one is Date Format from MM/DD/YYYY to YYYYMMDD.
I want to execute the macro from the customize ribbon through Add in Buttons.
See the attachment : Customize the ribbon with Macro code.jpg
View 1 Replies
View Related
Mar 21, 2014
Below is some code that I found on the internet some while ago. When Excel opens this code runs which brings up a message box prompting a user to select an option. If no option is selected within 15 seconds then the macro runs, else it depends on the selection entered.
The problem that I am experiencing is that sometimes when the user does not select an option the macro does not execute after the coded 15 seconds. The message box just sticks around until a selection is made.
Most of the time it works just fine... some of the time it doesn't. The problem would appear to have gotten worse since upgrading to Excel 2010.
So, my question is either:
1. Why the code does not execute as expected each time Excel is opened?
2. Is there a better / more robust way of executing the below code without using "shell"?
[Code] ......
View 4 Replies
View Related
Aug 22, 2012
I keep getting an automation error in excel 2010 when I click on the button that executes the macro. Excel crashes when the box appears. There is no code in the error box. Why I get this error message.
View 2 Replies
View Related
Nov 10, 2013
I am on office 2010
I am new to VBA programming so i might be making a obvious mistake. I am trying to create a macro that will insert rows depending on a cell value. I also need this to be executed from a command button rather then to occur immediately after the cell value is entered. So as a example
Lets say
Cell A2 has a value 20
Cell A3 has a value 3
Cell A4 has a value 5
when this data is entered and then a Command button poressed there should be
20 rows beneath cell A2
3 rows beneath cell A3
5 rows beneath cell A4
View 9 Replies
View Related
Feb 14, 2012
I am attempting to use a previously Set variable as part of the next Set statement, pretty unsuccessfully at present.
My purpose is trying to look up
Code:
tb_SelJobID.Value
from a userform in Col Z then look across the row to Cols D,I,N,S & W (different types of work) to see if
Code:
TbSelYr.Value
matches the year selected then insert a formula in the row to the left. Then loop down to the FinalRow.
Currently my Set Found1 statement does not recognise my Found10 value. I know it will be my syntax as it always is. I have cut down the following code to display where the problem areas are, Found1 thru 5.
Code:
Sub CmdGo3_Click()
Dim Row As Range
Dim FinalRow As Long
Dim Found1, Found2, Found3, Found4, Found5, Found10 As Range
Application.ScreenUpdating = False
[code]....
Windows 7 with Excel 2010
View 9 Replies
View Related
Oct 1, 2012
I would like to add a command to my macro that will do one simple step: Refresh all FDS Codes
FDS I believe is short for FactSet Data Series. FactSet is an add-in for excel we use at work. The FactSet menu button is in my ribbon and when I choose that add-in, there are a number of actions I can execute. One is to refresh all FDS which is to refresh all cells with formulas that pull in data from our FactSet database.
I tried recording this action but VBA does not show any key strokes from those steps so I think I just experienced one of the many shortfalls of recording macros. Is there a way to write the macro to execute this action? I would think since I am using a FactSet add-in, it would be possible but I don't know where to begin.
View 1 Replies
View Related
Mar 6, 2014
I am running excel 2010 with windows 7. I created a macro in sheet 1 and I wish to activate the macro from sheet 2 using a form button. I have entered the code below. I know how to perform this function on a more simple macro like adding names to cells. This code is a bit more complex I just dont know where to start.
Code:
Sub LoanData()
'
' LoanData Macro
[Code].....
View 3 Replies
View Related
Jul 2, 2014
I have attached a test workbook excel 2010 (ignore ref# errors, I've cut the workbook down for uploading purposes) What I would like to do is have a 'Button' on my 'information Sheet' which when clicked would clear certain cells. I have searched the forum but can't find a solution, everyone seems to want to delete rows or columns but I just want to clear certain cells. The workbook will have 11 sheets each named 'caravan 1' through to 'caravan 11' The uploaded test workbook only only has 3 sheets.
On 'caravan 1' (which is slightly different to the other 10) I want to clear the content of cells
B4 & B5
C4, C22 & C41
D4 & D5
E4,E5, E22,E23,E41 &E 42
On all other 'Caravan sheets' I want to clear the contents of cells
D4 & D5
E4, E5, E22, E23, E41 & E42
It would be icing on the cake if it could give a warning such as " are you sure you want to clear these cells" but that isn't really necessary. The worksheets will be password protected, but the cells mentioned above will not be. If it proves too difficult to clear all the cells on all the sheets with one click, then perhaps a simpler solution might be to have a button on each sheet instead
View 8 Replies
View Related
Nov 20, 2006
I'm having a problem with negative values. Somehow if the pitchX is -11.1877, let's say, and it is the right value, the code will still perform the 2nd if statement, when it should not. Am I using the wrong data type? Or is there anything I'm missing out?
Dim pitchX As Double
If pitchX > 10000 Then
pitchX = pitchX / 1000
End If
If pitchX <> Range("C8").Value Then
With Range("C8")
.Font.Bold = True
End With
End If
View 6 Replies
View Related
May 7, 2013
Windows 8, Excel 2010,
What is a condensed way of saying;
Dim x As Integer
Dim y As Integer
Dim z1 As Integer
Dim z2 As Integer
Dim z3 As Integer
Dim z4 As Integer
Dim AA As Integer
View 9 Replies
View Related
Jun 27, 2013
I have tried to shorten my code by combining common tasks, however it runs but selects the wrong data. In the example below,
The code returns the expected if I select "M135X" and "300 hrs", but unexpected results if "M135X" and "1500 hrs" is selected
My variables are models and hours - the code below is for one model.
Code:
'Next Model
ElseIf Range("D3") = "M135X" And Range("E3") = "1st Service" Then
ThisWorkbook.Worksheets("M100X-135X").Range("B37:D44").Copy
Range("J10").Select
Selection.PasteSpecial Paste:=xlPasteValues
Application.CutCopyMode = False
[Code] .........
View 5 Replies
View Related
Nov 20, 2013
I tried Conditional format and no luck. (Office 2010)
What I'm trying to do VB is:
If Cell B:B has value of "402" or "up"
and Cell C:C is less >100
Then Change color on Cell C:C to "yello, red, etc" (if C value is <100 no color change)
View 6 Replies
View Related
Feb 5, 2014
Excel 2010. Windows 7
Run-time error '-2147467259 (80004005)':
An unexpected token ""20*"" was found following "1' AND
PERIOD = LIKE*. Expected tokens may include: "". SQLSTATE=42601
code died at RS.Open SQL, CN
/////////////////////////////////////////////////////////
Sub GET_OSI
Dim sn as String, osi as string, saposi As String
[code]....
View 2 Replies
View Related
Jul 5, 2014
I need some different columns within a row to calculate based on a statement found in an earlier column in the row. something similar to below. there will only be two statements total which are noted on the table below.
A
B
C
D
E
1
0
0
20
5%
[Code].....
So basically If column A = disposition calculate D and E in column B but if Column A = Receipt calculate in column C
The formula for D and E is not exactly as shown just using that as a quick example. I'm using office 2010.
View 1 Replies
View Related
Oct 11, 2013
I am using MS Excel 2010 want what to change a number of cells if a value is true e.g.
Row one has the headings Prz, Stat, Val, andPts
Row two has the following values :-
(Prz) a2 =2, (Stat) b2=1, (Val) c2=$30, (Pts) d2=10
How do I do the following in Excel :-
IF B2=1 THEN A2+1 AND C2+30 AND D2+5
so that the above cells are changed to
(Prz) a2 =3, (Val) c2=$30, (Pts) d2=10
View 4 Replies
View Related
Aug 30, 2012
I Have a CheckBox Thats Linked with CA22
In Cell CB22 I have the Following Formula:
=IF(CA22=TRUE,"1","")
In Cell CC22 I Have...
=IF(CB22="1","RM-4E ADD1",HYPERLINK('RM-4E (Add - 1) (2)'!A1,"RM-4E ADD1"))
The Sheet namne its supposed to Hyperlink to is called
RM-4E (Add - 1) (2)
When the Check Box is Unchecked it Changes CA22 to False and Puts in CC22 Text: RM-4E ADD1
When the Check Box is Checked it CHanges CA22 to TRUE and is supposed to create a Hyperlink to that sheet...Only when i click it it comes back with
'Cannot open the specified file."
I even went as far as typing out the Word Hyperlink( clicked the sheet and selected Cell A1 on that sheet but it still comes back with the error!
Excel 2010
View 9 Replies
View Related
Feb 22, 2013
I have executed this macro from this spreadsheet many times but today, after I execute the macro, the box increased in size. I repositioned it on the page, resized it and re-executed. Now it is decreasing the font size within the button each time I execute. It executed just fine yesterday. I assume it's some setting in excel because I've tried another spreadsheet and am seeing the same result.
View 1 Replies
View Related
Jul 4, 2012
Excel 2010. I set up a trial balance as following:
1/31/2000 2/28/2000 3/31/2000 ------- 12/31/2012
Acct # 1
Acct # 2
Acct # 3
Acct # 4
I was able to use pivot table to set up the balance sheet and income statement.
1. now each month is a field which I can choose to add to the report, but the field list is getting too long (and growing). Is there a way I can insert 1 field (for the user to input the exact date) or 2 fields (to input year and month) and the pivot table can pick up the input and refresh either automatically or manually.
2. I looked into the "group" function in pivot table, but how do I group the above data in quarterly and yearly fashion so the user can get those information quickly?
View 1 Replies
View Related
Apr 23, 2013
Excel 2010, I have the following list (showing part of it):
Name
T-Shirt Sizes
Nathan
S
[Code]....
The aim of the list is to see what Sizes each and every person needs and then count how many T-Shirts are required for that particular size. The list is over a 100 entries long so counting it manually isn't really an option as it's time consuming as well as errors might arise.
Thus, I've been trying to use the IF statement with the following logic but to as no avail
IF Size in Column is XS
Add 1 to a particular Cell
IF Size in Colum is S
Add 1 to a particular Different Cell
and so on for the other sizes...kind of like a counter for a for-do-loop.
View 2 Replies
View Related
Feb 26, 2014
I'm using 2010. When I highlight rows or columns and select Group, the show (+) / hide (-) buttons would appear in the next to or above the header rows/columns.
The file I am working on is not showing these buttons. If I go to the Data tab & click "hide detail" or "show detail", it will hide my grouping if I'm in one of the cells of the grouping.
I can easily hide/unhide, but would rather group & click rather than highlight rows/columns.
View 3 Replies
View Related
Mar 12, 2012
I am looking for some code which will return the location of the form button which is being clicked on to activate the macro. I would like to avoid using an active.x button if at all possible.
In this way I can use the same macro on a column of buttons to trigger an action based on adjacent cell contents.
e.g.
Name Button
Mr a Button1
Mr b Button1
Mr c Button1
The aim is to use the button on an index tab and to capture the name next to the button as a sort string for data on a separate tab.
I am running Excel 2010 on Windows Xp.
View 4 Replies
View Related
Dec 6, 2012
Code + Button to automate certain row heights.
1. Starting in row 5 the row height is to "30"...every 17 rows after row5 to have a height "30"...next row 22 is "30" , then row 39 is "30" and so on...
2. All rows in between row height "30" will be with a row height of "11"
3. Can this be associated with a button....
4. where would i place this code.....
Version:Excel 2010
View 9 Replies
View Related
Sep 2, 2013
I am using excel 2010, i try to insert active x control command button insert but " cannot object insert" like this message came?
View 3 Replies
View Related
Aug 5, 2013
Excel 2010. How/where to define userform object?
Button on worksheet has following code:
Sub Button1_Click()
Load UserForm1
UserForm1.Show
End Sub
Execution of this code generates following error:
Run time error 424
Object required
How/where to define userform object?
View 1 Replies
View Related
Jun 3, 2014
How to disable the default close button in a workbook not to affect in my command button close.
I tried already cancel = true but my command button close is also been canceled.
View 3 Replies
View Related
Sep 7, 2010
I am using Excel 2010. I am using a shared workbook that was originally created in Excel 2003. This workbook has a command button that is supposed to be clicked to open a userform. However, I cannot even click on the button when opening the shared form in Excel 2010. When the form is not shared, the button works fine.
I have no problems with the button when opening the shared form in 2003 or 2007.
Is there anything I can do to make the command button work while the form is shared and while using Excel 2010?
View 4 Replies
View Related
Aug 30, 2013
I'm using excel 2010 and I need a command button to add rows to the end of the dynamic table.
View 3 Replies
View Related
Mar 25, 2014
I am trying to send bulk emails from my excel 2010 - however I am getting a POP UP. find the screen shot in the enclosed word document So every time a new mail is sent from excel we need to press the button allow Is there a way where I can turn off this warning.
View 6 Replies
View Related
Jul 2, 2012
I have developed a Userform button in Excel 2010 using the developer icons, which when clicked on with my mouse it runs my super dooper macro. It works great!
But one thing I want to have happen is to have the choice of using the Enter key to start the macro or use the left mouse button
For example, I place data in (say) cell A1 and the userform button is in cell A2. When I place the data in A1 and press the Enter key, the cursor moves down to A2, but doesn't highlight the user button. When I press the Enter key again, the cursor moves to cell A3.
What I want is when I fill in the data in A1 and press the Enter key, the cursor moves to cell A2 and selects the button, so that when I press the Enter key again, it activates the macro.
View 3 Replies
View Related
