How do I have a macro execute anytime a checkbox, or radio button is clicked on a form? I have a macro that needs to run, but I don't want to put it in the code for every checkbox because it will complicate any changes or additions to the form.
View 9 Replies
I have the following code:
[Code] .......
What do I need to change in order to make it execute the Call statement on EVERY item in the ListBox2, not the Selections.
Attachment 299651
I have turned a Workbook with Macros into an add-in. The macros work perfectly for the intended purpose: copy selected data in a special way and put it into an e-Mail message.
I used the CustomUI Editor to assign a macro to a Ribbon button.
However, when I turn it into an add-in and click the Ribbon button, it doesn't work on my machine or any other machine, with an error that says "Cannot run the macro 'CreateListofInventory'. The macro may not be available in this workbork or all macros may be disabled.
My macros are not disabled, and the add-in doesn't even work in the book where the macros reside.
I coudn't find anything on this forum on this subject.
Is there a way to execute [trigger] a macro from within a formula?
e.g. Based on an IF statement result, execute macro1 if true or macro 2 if false?
modytrane
I need a macro that will execute the F2 function key so that the cell can be edited.
View 7 Replies View RelatedHow do I let a macro execute a certain key strok combination, such as Alt, D, G, H?
(Didn't really know what to search for...)
Is is possible to have a button or a box of some sort that the user of a spreadsheet can click to execute a piece of vba code that I have? If so, can someone tell me how to insert such a button?
View 2 Replies View RelatedIs it possible to use a macro to:
1. Open Excel from the Desktop
2. Open a workbook
3. Execute a macro from this workbook
If so, how can it be done, specially point 1?
I found the following code to execute a macro in all excel files in a folder. Sounds amazing! I have a code to add to it, however I am having issues getting it to work. take a look at it and let me know what (more like, how many things). I am adding this to the Sheet 1 Worksheet.
View 3 Replies View RelatedI need to execute a macro (just a simple "msgbox") but only if a specific user (or users) have opened the file.
View 1 Replies View RelatedI would like to add a command to my macro that will do one simple step: Refresh all FDS Codes
FDS I believe is short for FactSet Data Series. FactSet is an add-in for excel we use at work. The FactSet menu button is in my ribbon and when I choose that add-in, there are a number of actions I can execute. One is to refresh all FDS which is to refresh all cells with formulas that pull in data from our FactSet database.
I tried recording this action but VBA does not show any key strokes from those steps so I think I just experienced one of the many shortfalls of recording macros. Is there a way to write the macro to execute this action? I would think since I am using a FactSet add-in, it would be possible but I don't know where to begin.
On my worksheet, i want to execute a macro to calculate and display some informations when the mouse is positioned over certains cells. I look around but did not found how to do it.
I want the information to be displayed above that cell and disapeared when mouse pointer moved away.
How would I add a YesNo MsgBox to my existing macro that I have set up through a commancd button? I would like the user prompt to ask the following ? ---> "Would you like to move the data sheet forward 1 week?". Then if "Yes" is selected, run the following macro. If "No", end the subroutine.
Private Sub CommandButton6_Click()
Range("M7:BL156").Select
Selection.Copy
Range("L7").Select
ActiveSheet.PasteSpecial Format:=3, Link:=1, DisplayAsIcon:=False, _
IconFileName:=False
Range("I4").Select
ActiveSheet.Range("L6").Value = Range("L6").Value + 7
End Sub
creating macro dynamiccally on keypress and execute it
i have 3 excel sheet sheet1, sheet2, MasterSheet
MasterSheet conatins the following
COLUMN A COLUMN B COLUMN C
Colorcode FLAG SKEYS
RGB(121,223,214) A Ctrl+a
RGB(125,228,114) B Ctrl+b
[code]....
I have 3 columns column 1 contains colorcode in RGB format column 2 Contains FLAG and column 3 contains SHORTCUT KEYS
i have a macro in sheet1 & sheet2 for coloring the backgrouf color of the selected rows in sheet1 or sheet2
Code:
Sub Macro_color()
With Selection.Interior
.Pattern = xlSolid
.PatternColorIndex = xlAutomatic
.Color = RGB(234, 241, 221)
.PatternTintAndShade = 0
End With
what i need is when th user presses say Ctrl+c , RGB(233,129,220) from the MasterSheet needs to be copied in the macro as .Color = RGB(233,129,220) instead of RGB(234, 241, 221) and the selected row in sheet1 shld be colored. how can it be done
Is it possible to create 1 macro which will execute multiple macros on different sheets?
I have approx. 12 macros that I can run in order, and I would like to create 1 button on the first sheet of the workbook to execute all 12 macros, which are contained on various other sheets. Is this possible?
When I attempted to do this, the master macro ran an odd function on my first sheet.
I've attached a sample workbook in which there are 3 macro-buttons.
The buttons will paste a shape in the active cell. So this means the buttons themselves could be deleted and replaced with a shape.
Since locking and then protecting the cells disables the macros, how can I amend the code to make sure the buttons' cells are protected from the copying and pasting macros? Or, how do I ensure that the macros only work in A1 - E5?
Below is some code that I found on the internet some while ago. When Excel opens this code runs which brings up a message box prompting a user to select an option. If no option is selected within 15 seconds then the macro runs, else it depends on the selection entered.
The problem that I am experiencing is that sometimes when the user does not select an option the macro does not execute after the coded 15 seconds. The message box just sticks around until a selection is made.
Most of the time it works just fine... some of the time it doesn't. The problem would appear to have gotten worse since upgrading to Excel 2010.
So, my question is either:
1. Why the code does not execute as expected each time Excel is opened?
2. Is there a better / more robust way of executing the below code without using "shell"?
[Code] ......
1) I have a VBA macro MyMacro() which works fine.
The macro is assigned to a button on the w/s, and also runs from w/b Open() event and other locations within the w/b.
2) The macro displays a message just before exiting whenever it is called.
3) I’d like the MsgBox statement in the macro to be executed ONLY when the macro is run from the button.
In other words, skip the MsgBox statement when the macro is run from anywhere else in the VBAProject.
Can this be done ? possibly by inserting a statement or two before MsgBox in the MyMacro() code ?
I have created a form that pops up using a macro when the form is opened. It is a simple form that uses optionbuttons in a group to select Intl or Dom.
Problems:
1) How do you get the form to close once a button is selected?
2) The user can close the form without selecting a button (the X at the top).
3) How do you get the data selected onto the excel spreadsheet?
How to add the macros in existing excel ribbons.
For example - I have a two macro codes. One is change the Date Format from DD.MM.YYYY to MM/DD/YYYY and another one is Date Format from MM/DD/YYYY to YYYYMMDD.
I want to execute the macro from the customize ribbon through Add in Buttons.
See the attachment : Customize the ribbon with Macro code.jpg
I have to run a report each morning and in once cell I need to pull in the contents of another cell from another worksheet. I'd rather not have to open the additional file each morning to copy and paste special the values so I'd like to add to my current macro to pull this data in automatically. I have to do this for two different reports/portfolios and the data I am pulling in for each portfolio is located in the same exel file but under two different tab names, the portfolio names 2010 and 2045.
Deliverables
The spreadsheet I am pulling data in from is located here:
K:Risk OversightMarket RiskTracking ErrorBARRA
and the file name is: Daily Barra Tracking Error.xls
Tab name would be 2010 for the 2010 portfolio or 2045 for the 2045 portfolio The vlookup will be from "A32:B2500" and I would like to incorpoprate an IFERROR function that returns "" in the event of an error. Column "A" are dates and column "B" is the data I need to pull in.
Receivables I am pulling the data into cell "J23" of a summary report (sheet 2) and would like the vlookup to read something like this:
IFERROR(VLOOKUP("K1"Active.Workbook.Sheets2,[K:Risk OversightMarket RiskTracking ErrorBARRA"&"Daily Barra Tracking Error.xls"(Sheets)]."2010""A32:B2500",2,0),"")
This should return a blank cell if the date cannot be found in the data spreadsheet and return the correct data for teh correct date being referenced in my summary sheet.
how to do the bracketed parts for pulling in the right spreadsheet and tab.
I keep getting this error:
"Compile Error: Invalid outside procedure"
What I am doing is having a macro execute every time my Pivot table is refreshed, the macro invokes a format change.
I use Excel 2003. With a LOT of help from this board, I've written some macros for a workbook template that will be opened then saved with another name with an .xls extension. The problem is that the macros transfer data to and from another workbook template. Here's the code that's giving me problems.
Windows("BookA.xlt").Activate
Sheets("Sheet1").Select
ActiveWorkbook.Save
Range("A1").Select
Application.CutCopyMode = False
Selection.Copy
Windows("BookB.xlt").Activate
How can I use the macro if I open BookA.xlt then change the name to BookZ.xls for my data entries? At the same time BookZ is open, I may use another instance of BookA.xlt and save that one as BookY.xls. What's the most feasible way to still use the macros?
The following code works fine but now I want it to work without a userform. SO there is no userform and so no controls.
When the user changes date in a cell then a macro should run and following kind of code should execute.
[Code] .......
how to alter this Private Sub for my code to execute automatically once all 3 cells have changed. At the moment it executes as soon as any of the 3 cells change.
Here's the Private and Public Sub codes:
I'm making a worksheet with 64 dropdown boxes.
I would love a macro that activates whenever any combo box is changed, that could tell me which DropDown was changed.
DropDown1_Click() seems to be the only option i can find, but is there a way to not have to create a unique method for each object?
I have a worksheet containing a cell (say A1) that has a validated list of times (data/validation/list) where the cells in the list contain times in 8 minute increments. The user can select cell A1 and manually select any of the validated times from the list. A vlookup formula on this worksheet uses the content of cell A1 to look for this time in another section of the worksheet. When the time is selected manually, the vlookup formula works properly.
As part of a macro, the macro will change the time in cell A1. I do this in the macro by selecting and copying the desired time from the validation list and pasting it into A1. Cell A1 does change to the new value, however the vlookup formula that uses A1 shows a result of #N/A. If I manually change the time, it again works. I am looking for a way to have the macro change this cell to another time and for the vlookup formula to work as it should.
I would like to create a macro that will automatically change the name of the sheet any time a value is entered into cell a1. For example, in cell A1 of sheet1 I would input "Hello", and then the tab for sheet1 would be automatically renamed to "Hello".
Here's the twist - the workbook will have multiple sheets, and I want all tabs to reflect the value of a specific cell (a1) in each sheet.
For example:
value in sheet1, cell a1 = "Yes" - corresponding tab name would change to "Yes"
value in sheet2, cell a1 = "No" - corresponding tab name would change to "No"
value in sheet3, cell a1 = "Maybe" - corresponding tab name would change to "Maybe"
etc...
The "tab change" cell would always be cell a1 in each sheet.
Colouring calendar entries based on a date match... VBA to colour a cell on each line based on date match
The code works fine if you change the date in the cell and press enter however my date changes are triggered via a Vlookup which the code doesn't recognise has changed so doesn't trigger the macro.
Is there any way to amend the VBA code shown below so that it triggers the macro when dates are changed in column I via Vlookup?
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
If Intersect(Target, Range("I:I")) Is Nothing Then Exit Sub
Application.ScreenUpdating = False
Target.EntireRow.Interior.ColorIndex = xlNone
[Code] ......
- A database sheet called 'QAEQUIP' which contains information on the movements of pieces of equipment. This information in in order of Column A which is a movements reference number.
- A reporting sheet called 'Email sheet', which you put in a month and year and using macros it copy and pastes the relevant rows from the database and puts them in date order (e.g. put in October 2013 and it will show all of the equipment moves that happened in October 2013, and in date order).
What my end user would like, is to be able to add text to an extra column on the reporting page which gets fed into the database on the corresponding row. What would the best way to do this be? I was thinking VBA for each row (there aren't that many rows) that says if this cell is changed, copy and paste the cell into the corresponding row / column on 'QAEQUIP'.
