I have an excel file with a single column that looks like this:
A
HYU
NVT
FYR
NUH
GFR
TRF
GXA
AKL
My question is how do i export the data out of excel so that I can have a text file that reads like this:
A,HYU,NVT,FYR,NUH,GFR,TRF,GXA,AKL
I have a very indepth spreadsheet at work. We also have a form that was typed up in word that uses some of the information from the spreadsheet. I was wondering if there is a way to have the information from the spreadsheet autofill the form that is in word?
View 14 Replies View RelatedI have a table in the format below with about 3500 rows
Column A
Column B
0001
All vehicles, Retirements
0002
All vehicles, Retirements, Addition
0003
All vehicles, Retirements, Addition, Deletion from Y
I would like to change it to the following format:
Column A
Column B
0001
All vehicles
0001
Retirements
0002
All vehicles
0002
Retirements
0002
Addition
0003
All vehicles
0003
Retirements
0003
Addition
0003
Deletion from Y
I'll try to simplify what I'm trying to do without getting into too much details that might be considered irrelevant to my question.
1. A set of VBA procedures are run successfully, and the results are compiled on a single w/s "mySheet" in a single w/b "myBook".
2. I intend to repeat 1. above 1,000s of times (same w/b, same w/s).
3. Consider a single run. The results of interest on "mySheet" are confined to a range, say, A20:K40, named "myInpRange", with a 7-digit run identifier ID automatically generated and stored in cell F5, say, F5 = 1234567
4. I've successfuly performed the following tasks manually:
...a) copy range A20:K40 of "mySheet"
...b) Open a new MS Word document
...c) Paste Special as Unformatted Text
...d) Save the Word file for this run As: LL_1234567.inp (="LL_" & F5 & ".inp")
...e) Close the Word file.
...f) Repeat a) to e) above for the next run.
Q: How to code a VBA Excel macro to handle Excel & Word, run from a button on the w/s "mySheet", and to perform the tasks a) to e) above ??
In case you might wonder why I do have to go through this trouble. Well, my next set of programs are DOS-Applications, which only allow their redirected input data files to be as described above.
I have been presented with an excel document, with image names in one column (e.g. 832005_001), and hyperlinks in another column [URL]
My goal is to export the hyperlinks in the excel document into a folder as images with the corresponding image names. Is this possible to do without manually opening each link and saving it in a document, and manually renaming each picture in accordance with its image name? (as there are over 4,000).
I have this excel sheet which I want to export to a word document. The following code has been used:
[Code].....
It creates a word document but it only copies and pastes a picture of the excel sheet. I want for the user to edit the word document values that are pasted from the Excel sheet. I know I need to change somewhere in the:
[Code] .....
How can I paste values from excel to word that can be modified inside of word?
ALSO:
How can I change the layout of the word document, for example if I want to add a header and a footer?
Is there a way to save as an excel file containing a list of words inone column so when I open it in Notepad I get the words in one line separated by commas?
View 6 Replies View RelatedI have data in this formatItem
# Data
A
1, 2, 3, 4, 5
And I am trying to see if there is a way to separate the data column into separate colums anywhere that a comma is present.Need data to look like this.
Item #
Data
Data
Data
Data
Data
A
1
2
3
4
5
I have a spreadsheet with sales information contained in Sheet1. There are a number of columns including the Region column. I would like a bit of code that exports sales information to a number of Excel files dependent upon the region column. In other words the Region column can contain either North, East, South or West. I would like a different Excel file per region and I'd also like the file names to contain the name of the region + the month and year of the previous month ie if i was exporting today then the North Excel file would be called: "North Sales - Jan 2013".
View 9 Replies View RelatedI am trying to export the emails from outlook to an excel by the normal method. Here the body of the method is not exporting properly in to my excel. Is there any macro or a vb code to export the body of the messages to excel.
View 2 Replies View RelatedI have about 180 Excel files (each one with 51 columns and around 30,000 rows) that need to be exported to an Access table.I'm using the routine below which is extremely time-consuming. I'm sure there is a better way to export an excel file to an Access table.
Sub ExportHistData()
Dim rst As Object
Dim cn As Object
Dim i As Long
Dim lstCell As Long
Application.ScreenUpdating = False
lstCell = [a65536].End(xlUp).Row
If lstCell = 1 Then Exit Sub
[code].....
I have some data in cell A1, example would be "ABC,CDE,"
I was wondering if I can input a formula in B1 where it returns the text after the first comma, including the comma.
A1 would be ABC,
B1 would be CDE,
I'd like to keep the commas, and I also need to make this into an Excel formula if possible, rather than using Text to Columns
I've created a spreadsheet to create a text file which I can use to inport values into another device. Using CONCATENATE etc I end up with a range of cells (1 column / Many rows) that I can then MANUALLY highlight, choose copy, open the text file, paste in the contents and then save it. This works fine but as you can imagine I'd like to automate the proceedure by having excel create and save the text file for me.
From what I've seen on these forums most people are wanting CSV type files but not me. I've already got the cell contents pieced together it just needs writing to a text file, no delimiters, no quote marks, just exactly what's in the one cell on one line, it's just one column remember (H2:H1456).
I'm not bothered about appending data either, a hard coded overwrite of the text file is fine by me.
The actual file type I ultimately need is an .abk file, but like I say this is just a basic text file that's been renamed. Could Excel create this or must it have the .txt file extension?
I am looking for VBA code to remove extra commas from d column.
Missing
, , , 1617614,
, , , 1676652,
, , , , 1676664, 1676665, 1676666, , 1676668, , 1676670
, , 1591813,,,,
, , , 1591113,
Currently, I have 65536 rows of data per sheet in an excel file. I have a total of 8 sheets. I need to combine all these sheets into one csv file. As my company uses excel 2003, I can't consolidate all sheets into 1 sheet before saving as CSV format as it will exceed the number of rows available in excel 2003.
However, the number of rows and number of sheets in the excel file will change monthly, and I need to consolidate the excel file accordingly.
I am wondering if I could save a new workbook as csv format first before copy and paste all data into that csv file.
Also, all the 8 tabs have the same header. I only need to copy the header on the first tab, and for the sequence tab, I will only need to copy row 2 onwards.
I have recorded a macro based on a sample data.
Sub Macro1()
'
' Macro1 Macro
'
'
ActiveWorkbook.SaveAs Filename:= _
"C:Documents and Settingse31425My DocumentsBook1.csv", _
FileFormat:=xlCSV, CreateBackup:=False
[Code] .......
I've been using a script I found on the web to export a book of 15 worksheets so that they are saved into a folder as 15 separate .csv files - these are to then be imported into Adobe InDesign at a later date.
Currently, the code looks like this:
VB:
Sub SheetsToCSV() 'Jerry Beaucaire (1/25/2010)
'Save each sheet to an individual CSV file
Dim ws As Worksheet, OldDir As String
[Code]....
If possible, I would like the sheets to be exported as consecutively numbered files, so that they can be set into the order they are exported in Windows Explorer, rather than alphabetically.
E.g.
Sheet names = Overview, Checking, Testing
.csv export = overview-17.05.2013.csv, checking-17.05.2013.csv, testing-17.05.2013.csv
Goal = 1overview-17.05.2013.csv, 2checking-17.05.2013.csv, 3testing-17.05.2013.csv
I'm not too fussed about the final formatting, as long as the consecutive numbers can be inserted at the start of the string, the rest isn't as important.
I am working on a excel file that has a sheet that i want to convert to .csv. The sheet has formula's for the first three column that are warped an if statement that returns "" (blank) if certain conditions are not meet. However when i got to save the file as a csv i get a file with ",,,,,,," where there is no data. I would like to save csv and have only commas where this data.
Example
When i convert a sheet like
Firstname Lastname Password
Tim Cats Bo3n9x
it saves as
Firstname Lastname Password
Tim Cats Bo3n9x
,,,
,,,
,,,
In the .csv file.
Files i am current working on are attached.
Currently using Excel 2010 and looking for a macro that will export a selection (will be part of a column that I select) and export as an MS-DOS CSV file (no quotes around values, each row on different line) with 12 commas after each value in the selection.
Attached is an example of how I would like the output to appear, with the selected values only have four numbers in them. If possible, I would like a dialog box to appear for saving the file to a directory and name that I chose.
_________________Sample________________
1234,,,,,,,,,,,,
4567,,,,,,,,,,,,
9876,,,,,,,,,,,,
Using =A7&","&B7 to add data from two columns into one, separated by a comma. What about multiple columns, still separated by a comma? See Example in attachment.
View 2 Replies View RelatedRylo thanks for your help on the other project. Here is step two for the same project.
Basically I'm going to list a step by step list of what needs to be done then attach some sample sets so you can see what I'm talking about.
Step 1 ........
I am trying to get some data to export from one worksheet to another, but it doesn't seem to be working.
I have put the code below:
VB:
Sub ExportData()
Sheets("Data Export").Select
Range("B3:K5").NumberFormat = "@"
[Code].....
All VBA code posted in the forum must be wrapped in code tags, which you omitted, including single-line code snippets.
How to use code tags
[code]
your code goes between these tags
[/code]
Or, just highlight all of the code and press the # button to add the code tags
A daily updated data are to be auto-transferred into a table in another workbook.
Each imported number is to be hosted in a specified cell in the table.
I was wondering if anyone would be able to help me move data in a variable range after filtering out bunk information. The details are in the attached file as well as a sample of the way it should look at the end.
View 11 Replies View RelatedI've been recently doing a sales competition analysis for work. My basic tool of doing this is an excel sheet which contains product names, their price and amount in our stock. I am wondering whether I can export into a separate sheet only those whose number in the "amount" field is bigger than, lets say, 20.
View 1 Replies View RelatedI'm having some trouble with a little VBScript I have put together to export data into a CSV file.
The VBScript goes through each individual Row in excel and basically exports it to a CSV file in the format I need.
Code:
Dim JobHeader As JobHeader
Dim JobDetails As JobDetails
Dim FileNameStr As String
Dim RowStart As Integer
Dim MsgResponse As Integer
Option Explicit
[Code]....
CloseFile:
Close #1
End Sub
Sub ProcessJobs()
JobDetails.JDShipName = Cells(RowStart, 3).Value 'Col 3
JobDetails.JDStreet = Cells(RowStart, 5).Value 'Col 5
JobDetails.JDBlock = Cells(RowStart, 6).Value 'Col 6
[Code]...
This is working perfectly however there can be multiple lines of different product for the same Order Number and I need to consolidate this into one single line where the JDItemDescription, JDQuantity and JDWeight are updated with the combined data.
I have attached a copy of the Spreadsheet so hopefully you can understand what I am after. [URL]...
how to export and import data to and from my spreadsheet.
example:
-I have data range ( both numbers and text ) A1:F30 in sheet1
-I launch a macro and the macro asks me for a file name and location to where save the data ( does it have to be an .xls type file? )
-Conversely, I launch another macro and this time I'm asked to select a file that will transfer its data unto my spreadsheet
I've imported a large document to excel. It contains 118 rows of information. My problem is that all the information is in column A. Every cell contains long sentences with information. The information is divided by a comma-sign (,). What i want to do is to seperate the information by columns instead of a commasign. So for example:
...A....................................................B....C.....D
1 Div,Date,HomeTeam,AwayTeam,FTHG
Becomes:
......A....B ........C.............D..........E
1 Div Date HomeTeam AwayTeam FTHG
Is there any smart way to do this??
i have data exported as CSV from in house system, the problem is that data is separted by commas therefore some of cells have split, i need VBA to remove the commas and bring my data back into correct format. Below is a sample of what the data looks like, real data is 5000 rows of data
PFOLIO A/C CODE ACCT NAME CUR CODE DESCRIPTN NARRATIVE DATE ENTRY DATE CASH VALUE De --------------------------------------------------------------------------------------------------------------------------------------------ACA001AUDCUST JP MorganAUDINT0005 SALE 39727.08 INTECH BAL GR FD C29-Dec-082-Jan-09-27690.57N
I am in need of a macro that will scan a worksheet row by row, noting the column names (found in I2 to AQ2) in a specific horizontal span of cells (I to AQ) that hold (any) data. The macro will then paste these column names in a designated cell on each corresponding row (always found in column F), separating the column names with commas.
I am trying to do this for multiple worksheets containing ~100 rows - the example attached is just a quick demo of what I'm hoping to achieve. Also, these worksheets are contained in one big workbook, so ideally I'd like to be able to run the macro once and have it apply to every sheet in that workbook (they all have the same layout - the only big difference is the number of rows). If the Total Scenes part at the bottom of the sheet is problematic in getting this to work, it's fine to remove it.
I have this macro that will export some cells data to a worksheet. But at the same time I want to export other cells data to another different worksheet. Is it possible?
So far my solution is to use the same macro but with different command button.
[Code] ......