I have been presented with an excel document, with image names in one column (e.g. 832005_001), and hyperlinks in another column [URL]
My goal is to export the hyperlinks in the excel document into a folder as images with the corresponding image names. Is this possible to do without manually opening each link and saving it in a document, and manually renaming each picture in accordance with its image name? (as there are over 4,000).
I have this excel sheet which I want to export to a word document. The following code has been used:
[Code].....
It creates a word document but it only copies and pastes a picture of the excel sheet. I want for the user to edit the word document values that are pasted from the Excel sheet. I know I need to change somewhere in the:
[Code] .....
How can I paste values from excel to word that can be modified inside of word?
ALSO:
How can I change the layout of the word document, for example if I want to add a header and a footer?
I have 200 rows of data, each row is associated to an image. I woud like the filters to recognize that the image is associated to that row. I know that image is not "strictly" data. Does anyone know a way to do this?
View 3 Replies View RelatedI have a spreadsheet with sales information contained in Sheet1. There are a number of columns including the Region column. I would like a bit of code that exports sales information to a number of Excel files dependent upon the region column. In other words the Region column can contain either North, East, South or West. I would like a different Excel file per region and I'd also like the file names to contain the name of the region + the month and year of the previous month ie if i was exporting today then the North Excel file would be called: "North Sales - Jan 2013".
View 9 Replies View RelatedI have a very indepth spreadsheet at work. We also have a form that was typed up in word that uses some of the information from the spreadsheet. I was wondering if there is a way to have the information from the spreadsheet autofill the form that is in word?
View 14 Replies View RelatedI am trying to export the emails from outlook to an excel by the normal method. Here the body of the method is not exporting properly in to my excel. Is there any macro or a vb code to export the body of the messages to excel.
View 2 Replies View RelatedI have about 180 Excel files (each one with 51 columns and around 30,000 rows) that need to be exported to an Access table.I'm using the routine below which is extremely time-consuming. I'm sure there is a better way to export an excel file to an Access table.
Sub ExportHistData()
Dim rst As Object
Dim cn As Object
Dim i As Long
Dim lstCell As Long
Application.ScreenUpdating = False
lstCell = [a65536].End(xlUp).Row
If lstCell = 1 Then Exit Sub
[code].....
I have an Excel (.xlsm) that opens an existing PPT and uses VBA to modify several slides.
There are several shapes on each slide and my .xlsm has VBA that modifies those shapes.
(The slides have designs on them for different size business cards which get filled in with spreadsheet names,...)
Now I want to "select all" the shapes on a slide as a "group"(not sure that term is correct). Then I want to export that group as a .PNG image file. Save location can be the same folder location of the .xlsm file (doesn't really matter).
This is different than exporting each slide as a .PNG.(which I can already do). In this case the business card designs on each slide are different sizes. So I need the images to be just the size of the "group" on that slide.
The VBA code is within the .xlsm file (not the PPT)
Several posts show VBA code for within the .pptm file that works fine if using just a PPT
However that code doesn't seem to work when I put it in the .xlsm file to drive the image creation from Excel.
PC with latest of all software.
I've encountered another error when trying to run this macro to extract images from a spreadsheet. As the macro is running during the process it has stopped and I get the runtime error "1004": "Methid "Publish" of object "PublishObject" failed.
When I Debug it highlights the text below.
Sub Test()
Dim Folder As String
Dim Pic As Picture
Dim FileName As String
[Code]....
Alternatively if I click "End" it opens an extra excel window and displays an image from the original sheet. With the workbook labelled as the product code.
I have an excel file with a single column that looks like this:
A
HYU
NVT
FYR
NUH
GFR
TRF
GXA
AKL
My question is how do i export the data out of excel so that I can have a text file that reads like this:
A,HYU,NVT,FYR,NUH,GFR,TRF,GXA,AKL
Currently, I have 65536 rows of data per sheet in an excel file. I have a total of 8 sheets. I need to combine all these sheets into one csv file. As my company uses excel 2003, I can't consolidate all sheets into 1 sheet before saving as CSV format as it will exceed the number of rows available in excel 2003.
However, the number of rows and number of sheets in the excel file will change monthly, and I need to consolidate the excel file accordingly.
I am wondering if I could save a new workbook as csv format first before copy and paste all data into that csv file.
Also, all the 8 tabs have the same header. I only need to copy the header on the first tab, and for the sequence tab, I will only need to copy row 2 onwards.
I have recorded a macro based on a sample data.
Sub Macro1()
'
' Macro1 Macro
'
'
ActiveWorkbook.SaveAs Filename:= _
"C:Documents and Settingse31425My DocumentsBook1.csv", _
FileFormat:=xlCSV, CreateBackup:=False
[Code] .......
I have an excel file which contains 9 columns. Column A contains an article number i.e 12345 . Column B contains name of the product. Columns C and D contain Description and Specifications respectively. Columns E,F,G,H and I contain URL:s of images.
I want to do following.
1. Download all the images in a folder on my harddisk.
2. Copy the text in column C and place it under the text in column D.
note that I am a novice at excel and have never used macros/Javascript/VBA/etc
I've recently purchased an add-in for Excel 2010 called Image Assistant. It allows you to insert loads of images at once and automatically puts them in the cells for you, which is what I need to create quotes for my business. It was painstaking to go through resizing each picture individually so I thought I'd give this a go...
The demo of the program worked fine, except it restricted you to one picture at a time and I have thousands to go through. It resized the picture great and put it in the cell as I expected.
So I purchased the full product. There didn't seem to be an option to just put a license key into the demo version to make it full, and I was sent a link to download the full version, so I did.
When in Excel, I click the icon in the add-ins window and Excel grinds to a halt. It stops responding instantly and then won't do anything until I force close it, at which point it pops up with "Automation Error" and then closes the program.
I've checked DEP settings, trust center settings, add-in settings. I've tried 'repairing' Microsoft Office in case it was an issue with Excel itself but that didn't work. I've uninstalled and reinstalled the add-in several times and it still freezes every time I open it.
Problem signature:
Problem Event Name:AppHangB1
Application Name:EXCEL.EXE
Application Version:14.0.7109.5000
Application Timestamp:522a4031
Hang Signature:31f9
[Code] ............
with the following: The VBA macro I am using, is derived from the excellent "Table of Contents" macro written by Erik Van Geit, a few years ago.
I have a workbook (in Excel 2007, Windows XP) with an Index sheet and 200 other sheets (called ScreenShot1 to ScreenShot200). Each of these 200 sheets has had an image pasted in the top left corner.
At present, using the macro below, a hyperlink is placed in cell A1 on each of these 200 sheets (it's behind the image) that links to cell M1 on the Index sheet. What I would like this macro to do is make each image the hyperlink back to cell M1 on the Index sheet. Please note that the images are not named.
VBA code below,
Sub create_TOC()
Dim i As Integer
Dim msg As String
Dim fc_order As Range
Dim sht As Object
'**** EDIT the following lines ****
Const TOC = "Table of Contents"
Const Index = "Index"
Const CellLink = "A1"
'**** END EDIT ****
[Code]....
I have a stocklist that is currently in excel with product codes in column B. (eg 60080U-090)
I want to insert product images into column A. The product images are labelled as the style code (eg 60080U-090)
Now this is where you will chuckle, previously we have spent hours manually adding each image into the relevant cell and resizing.
Images are saved on a folder in the desktop labelled "Imagery" The excel workbook is saved in the same folder and labelled "Stock"
Here is something I have noticed with using Compress Images in 2010.
When I run Compress Images from the save as dialog box in 2007, the file size is slightly larger than if I run it in 2010. However, if I then send the resulting excel file out to people, if they are viewing it on an iPad, then they cannot see the images at all from the 2010 version but can see them fine if the excel file is from the 2007 version (with exactly the same data and images in there).
I cannot figure out why this may be. The options on both are set as "Email (96ppi)" and with "Delete Cropped areas of pictures" ticked.
I'll try to simplify what I'm trying to do without getting into too much details that might be considered irrelevant to my question.
1. A set of VBA procedures are run successfully, and the results are compiled on a single w/s "mySheet" in a single w/b "myBook".
2. I intend to repeat 1. above 1,000s of times (same w/b, same w/s).
3. Consider a single run. The results of interest on "mySheet" are confined to a range, say, A20:K40, named "myInpRange", with a 7-digit run identifier ID automatically generated and stored in cell F5, say, F5 = 1234567
4. I've successfuly performed the following tasks manually:
...a) copy range A20:K40 of "mySheet"
...b) Open a new MS Word document
...c) Paste Special as Unformatted Text
...d) Save the Word file for this run As: LL_1234567.inp (="LL_" & F5 & ".inp")
...e) Close the Word file.
...f) Repeat a) to e) above for the next run.
Q: How to code a VBA Excel macro to handle Excel & Word, run from a button on the w/s "mySheet", and to perform the tasks a) to e) above ??
In case you might wonder why I do have to go through this trouble. Well, my next set of programs are DOS-Applications, which only allow their redirected input data files to be as described above.
I have an excel file which consists of old name and new name in two different columns. I have 500 photos in a folder. I want to rename the photos with the new names when there is a match with the old name(same as that of image name) in the excel.
View 4 Replies View RelatedI would like to add hyperlink to multiple JPEG images (separately) in Excel 2003 and send those images via email to another person. On receiving the mail at the opposite end, the person concerned should be able to view the images by clicking the link. How to do?
View 1 Replies View RelatedI've been using a script I found on the web to export a book of 15 worksheets so that they are saved into a folder as 15 separate .csv files - these are to then be imported into Adobe InDesign at a later date.
Currently, the code looks like this:
VB:
Sub SheetsToCSV() 'Jerry Beaucaire (1/25/2010)
'Save each sheet to an individual CSV file
Dim ws As Worksheet, OldDir As String
[Code]....
If possible, I would like the sheets to be exported as consecutively numbered files, so that they can be set into the order they are exported in Windows Explorer, rather than alphabetically.
E.g.
Sheet names = Overview, Checking, Testing
.csv export = overview-17.05.2013.csv, checking-17.05.2013.csv, testing-17.05.2013.csv
Goal = 1overview-17.05.2013.csv, 2checking-17.05.2013.csv, 3testing-17.05.2013.csv
I'm not too fussed about the final formatting, as long as the consecutive numbers can be inserted at the start of the string, the rest isn't as important.
I am currently trying to create a database of products for my company. For each product I would like to include an image associated with it. I then want to have on another sheet a place where the user will click an error and be able to cycle through the products. As tehy cycle the associated image will pop up.
What I need to understand is after importing the image into excel, how do I associate that image to a cell so I can reference it in another sheet of the database. I am not concerned with how large the database will get, my pictures are quite small.
I used Excel to take inventory of the items in my store.
I have two columns that I would like to export into my point of sale program.
They are, "product code" and "inventory count". When I try to copy them into my pos system it won't work because I would have needed to hit the enter or tab key on the keyboard inbetween the two fields. So if I were going to enter it all by hand I would just type the product code, hit enter or tab and then type the quantity.
Is there anyway to make Excel export an Enter key press or tab key press inbetween the two columns? If I can't figure it out I will have to do it all by hand. (over 2000 items)
I was wondering if there is a way to export specific data from the workbook into a text document. I would want it to extract each worksheet name, and the contents of 2 specific cells.
So the text document would look something like this:
Sheet1name ContentsofCellM1 ContentsofCellN1
Sheet2name ContentsofCellM1 ContentsofCellN1
Sheet3name ContentsofCellM1 ContentsofCellN1
Sheet4name ContentsofCellM1 ContentsofCellN1
And so on for each worksheet.
Or if a text document can't be done, just create a new worksheet with the above extraction.
to write a macro to export 3 columns of information from excel into a table in access.
View 8 Replies View RelatedIs there a macro written or a way to write a macro that will take certain excel sheets and combine them to create one PDF? I have the excel add-in that allows a user to export either the entire workbook or a single sheet to a PDF file.
View 5 Replies View RelatedI have a spreadsheet containing, names, numbers, dates and scores of shooters. Is there a way of exporting the data held on the spreadsheet into a text file but in a specified format as follows:
The file is a fixed length text file as follows:-
>
>999042864NEWMNEWMAN W 060501060501 300 91 259
>
>999096292DORRDORRALL GM 060501060501 300 97 288
>
>First 3 bytes 999 - just historic
>
>Next 6 bytes - CPSA number leading zero filled
>
>Next 4 bytes - first 4 digits of surname - historic - used to double
>check CPSA No - Manual entries................
I have some data in Excel that I want to export to AutoCAD using VBA Code in Excel. But I don't want to have a table inserted in AutoCAD, but polylines and multitext.
Is it possible?
If someone could give me an example, how to draw simple polyline and insert mtext in AutoCAD (from Excel VBA Code) I should be able do do the rest.
I have multiple rows within a worksheet and need them to automatically save into a separate txt file. Example:
I have a workbook with rows b-z. Instead of taking each of the rows and copying and pasting it into another separate excel file, then saving in a txt format, is there a way to automate this? So that the following will occur:
Column B 950 line is one file
Column C 950 lines is another
column D lines in another txt file.....etc
I have some code listed below, however, it reads the first column cell by cell. It does not group column by column grouping all data within that column as on txt file
Sub notebook_save()
Set wkbk = Workbooks.Add
Sheets("Sheet1").Select
RowCount = Cells(Cells.Rows.Count, "a").End(xlUp).Row
For i = 1 To RowCount.......................
I work for a small business and I'm in the process of creating a simple invoicing system. The only hang-up I've come across so far is rendering images. I want a thumbnail of the product to appear on the invoice, but haven't had any luck finding code or formulas online that solve my particular challenge.
So cells B26 and B27 are merged and contain the URL address to the image I want rendered. I would like to maintain the width of the column when the image is rendered, but the height can be extended to fit taller images. There is only one image per printed page (per invoice). The image will always be in column B, of course there will be several rows between those containing URLs/images. For example, the image will be in B26:27 on page one, B67:68 on page two, B108:109 on page three, and so on.
I have attached an example file to this post. Please note: the file is saved as .xls intentionally and any solution should be compatible with this format.
Invoicing Test_ozgrid.xls
solve this problem using either formulas or code
I have a list of values in excel that represent image numbers (IMG_0001 etc...) in column A (A1:A703); hence representing my 702 images. I am trying to hyperlink each single image to its respective image which is located on my usb key all in one go (I don't want to hyperlink one at a time as it would take me for ages). Is there an easy way to do that?
View 1 Replies View Related