I have a simple spreadsheet with 4 columns A-D and a varying number of text rows in each column. I need to be able to export it into a CSV so that it puts each column on one comma separated line (in a text file).
So it should look like this:
A1,A2,A3,A4...
B1,B2,B3,B4...
C1,C2,C3,C4...
D1,D2,D3,D4...
The problem is that when I select save as CSV it looks like this:
A1,B1,C1,D1
A2,B2,C2,D2
I know that I could rewrite the excel file in rows rather than columns but I would prefer the columns.
I have a Text ID Column and a Text Column. I need to save each row of the Text Column into its own individual text file on my C: Drive. The name of the file should be the the Text ID from the first column. I need this to work with different sample data, so the number of rows will vary. I also need this to be able to work with excel files that contain thousands of rows.
i need to mark some row (which has some content written in), mark other row(with data too) and switch/transpose them mutual. when i was trying transpose method, which is using for switching rowns and columns, it wrote me error, that data are overlapping. it means it cant work on same things (rows > rows, columns > columns).
removing duplicate rows and move other data frm rows to columns.xlsx.
I am attaching a sample excel sheet showing what I need to do.In the first tab, I have a list that includes duplicate rows (first column only). I want to remove those duplicate rows but I don't want to lose the data in the following columns which can be unique or duplicates as well.
see the desired result tab in the sheet to get an idea of what I am looking for as the end result.
Keep in mind that the actual source file I am working with could have up to 50000 row, and the expected results could be around 2000 rows. So nothing can be done manually.
Company 1 Contact 1 Address 1 City, ST, ZIP 1 Phone 1 Fax 1
Company 2 Contact 2 Address 2 City, ST, ZIP 2 Phone 2 Fax 2
Company 3 Contact 3 Address 3 City, ST, ZIP 3 Phone 3 Fax 3
I want this:
Company 1 Address 1 City, ST, ZIP 1 Phone 1 Fax 1 Company 2 Address 2 City, ST, ZIP 2 Phone 2 Fax 2 Company 3 Address 3 City, ST, ZIP 3 Phone 3 Fax 3
all the way down.
I can't figure out how to record the macro to tell it to then skip the blank line, collect the next set of data, and put it in the next row. I can do it for two, but then it just replaces the first two with the next two and I lose data.
Column A is numbered 1 -100 successively Column B thru D contains data that goes with the assigned number in column A. I need to be able to move rows of data in column B through D to a different set of rows all at the same time (not one cell at a time) without disturbing the set numbers in column A. And with that, have all the other rows of data automatically adjust accordingly(not to be deleted or replaced).
I have individual data files (one for each participant). Each file has 64 rows (one for each trial in an experiment) and 18 columns (one for each variable). I would like to create a master data file in which each participant is represented in a single row. I will then have 1152 columns (18 columns for the variables, repeating 64 times so that each trial is represented).
In other words, my individual data files look something like this:
and I want to compile all the data into a single file that looks like this: Participant/Trial1_var1/Trial1_var2/Trial1_var3/Trial2_var1/Trial2_var2/ ... 1 55 43 65 54 43 2 . . .
I know how to record macros and use IF, THEN, AND, & SUMIF statements creatively, but that's about it. I was hoping to record a macro that I could use on each individual data file to turn it into a single row, and then paste each row into the master file.
How to align two columns that sometimes have rows that are unequal in number. The data is sourced from a web page that has a table layout and the table lays out the one to many values this way in the table. My data looks like this:
The editor removes leading spaces. In the column Table there are only three rows but in column Term there are multiple rows per single row from column Table. So one row t2 for column Table has three rows in column Term. Are these cells merged and can I in a mcro detect if the cells are merged? How is the addressing of the merged cells in a VBA macro?
I used Excel to take inventory of the items in my store.
I have two columns that I would like to export into my point of sale program.
They are, "product code" and "inventory count". When I try to copy them into my pos system it won't work because I would have needed to hit the enter or tab key on the keyboard inbetween the two fields. So if I were going to enter it all by hand I would just type the product code, hit enter or tab and then type the quantity.
Is there anyway to make Excel export an Enter key press or tab key press inbetween the two columns? If I can't figure it out I will have to do it all by hand. (over 2000 items)
I was wondering if there is a way to export specific data from the workbook into a text document. I would want it to extract each worksheet name, and the contents of 2 specific cells.
So the text document would look something like this:
Is there a macro written or a way to write a macro that will take certain excel sheets and combine them to create one PDF? I have the excel add-in that allows a user to export either the entire workbook or a single sheet to a PDF file.
I have a spreadsheet containing, names, numbers, dates and scores of shooters. Is there a way of exporting the data held on the spreadsheet into a text file but in a specified format as follows:
The file is a fixed length text file as follows:- > >999042864NEWMNEWMAN W 060501060501 300 91 259 > >999096292DORRDORRALL GM 060501060501 300 97 288 > >First 3 bytes 999 - just historic > >Next 6 bytes - CPSA number leading zero filled > >Next 4 bytes - first 4 digits of surname - historic - used to double >check CPSA No - Manual entries................
I have some data in Excel that I want to export to AutoCAD using VBA Code in Excel. But I don't want to have a table inserted in AutoCAD, but polylines and multitext. Is it possible?
If someone could give me an example, how to draw simple polyline and insert mtext in AutoCAD (from Excel VBA Code) I should be able do do the rest.
I have multiple rows within a worksheet and need them to automatically save into a separate txt file. Example:
I have a workbook with rows b-z. Instead of taking each of the rows and copying and pasting it into another separate excel file, then saving in a txt format, is there a way to automate this? So that the following will occur:
Column B 950 line is one file Column C 950 lines is another column D lines in another txt file.....etc
I have some code listed below, however, it reads the first column cell by cell. It does not group column by column grouping all data within that column as on txt file
Sub notebook_save() Set wkbk = Workbooks.Add Sheets("Sheet1").Select RowCount = Cells(Cells.Rows.Count, "a").End(xlUp).Row For i = 1 To RowCount.......................
Is there a way to export Excel (Excel 2003) into a flat file that is comma separated and also includes text identifiers, specifically double quotes (" ") around each field in a row?
The Export Wizard in Access makes that a snap but we (more than just me) haven't been able to make it work out of Excel.
I have a a matrix table with Rows (A1:A65) and column (B1:F1) as headers containing events and the dates filling up the matrix.
So suppose A10 has "#1015" and D1 has "Tax" then D10 has the due date of Tax payment of #1015
How can i export this table to google calenders to let it remind me of all the coming due dates? All of these events/dates need to be recurring every year.
Want it to be specifically for google calender because i need to be able to forward those reminders to concerned people to take care of it. I only know google lets us import csv files of icalender but i dont have the format or the structure of the csv file...
I have been presented with an excel document, with image names in one column (e.g. 832005_001), and hyperlinks in another column [URL]
My goal is to export the hyperlinks in the excel document into a folder as images with the corresponding image names. Is this possible to do without manually opening each link and saving it in a document, and manually renaming each picture in accordance with its image name? (as there are over 4,000).
I have this excel sheet which I want to export to a word document. The following code has been used:
[Code].....
It creates a word document but it only copies and pastes a picture of the excel sheet. I want for the user to edit the word document values that are pasted from the Excel sheet. I know I need to change somewhere in the:
[Code] .....
How can I paste values from excel to word that can be modified inside of word?
ALSO:
How can I change the layout of the word document, for example if I want to add a header and a footer?
I am using the code below which reads and exports the data to a text file.
1) the result is written to the text file with each line in quotation marks. As I want to subsequently change this text file to a batch file is there a way of the not having the quoation marks
2) As you will see the code looks for the text file in a specific folder on my PC, is there a way of it creating it's new txt file in the same folder that the spreadsheet is located.
3) is there a way of excel changing the file attribute from .txt to .bat
I was wondering if anyone would be able to help me move data in a variable range after filtering out bunk information. The details are in the attached file as well as a sample of the way it should look at the end.
I have created a macro which copies the content of one of the sheets of a workbook, on to a new workbook and then saves the new workbook as 'temp.xls' on the desktop.
I've been recently doing a sales competition analysis for work. My basic tool of doing this is an excel sheet which contains product names, their price and amount in our stock. I am wondering whether I can export into a separate sheet only those whose number in the "amount" field is bigger than, lets say, 20.
I'm having some trouble with a little VBScript I have put together to export data into a CSV file.
The VBScript goes through each individual Row in excel and basically exports it to a CSV file in the format I need.
Code:
Dim JobHeader As JobHeader Dim JobDetails As JobDetails Dim FileNameStr As String Dim RowStart As Integer Dim MsgResponse As Integer Option Explicit
[Code]....
CloseFile:
Close #1 End Sub Sub ProcessJobs() JobDetails.JDShipName = Cells(RowStart, 3).Value 'Col 3 JobDetails.JDStreet = Cells(RowStart, 5).Value 'Col 5 JobDetails.JDBlock = Cells(RowStart, 6).Value 'Col 6
[Code]...
This is working perfectly however there can be multiple lines of different product for the same Order Number and I need to consolidate this into one single line where the JDItemDescription, JDQuantity and JDWeight are updated with the combined data.
I have attached a copy of the Spreadsheet so hopefully you can understand what I am after. [URL]...
The code below is part of a program i'm trying to create. The first part of my program creates and 16 by x array where x is the number of rows from splitting up a string from a text box. Now that I have that part completed. i wanted to add the information back into a new sheet. I tried writing this code but when i get to the point of filling the cells with a value it gives me a range error.
Code: For p = 0 To UBound(Detailarray) For q = 0 To 15 Sheet2.Range(Cells(p + 1, q + 1)).Value = Detailarray(q, p) Next q Next p End Sub
