Move Rows Of Data From Several Columns But Not All Columns?

Dec 18, 2013

Column A is numbered 1 -100 successively Column B thru D contains data that goes with the assigned number in column A. I need to be able to move rows of data in column B through D to a different set of rows all at the same time (not one cell at a time) without disturbing the set numbers in column A. And with that, have all the other rows of data automatically adjust accordingly(not to be deleted or replaced).

View 1 Replies


ADVERTISEMENT

How To Transpose / Move Data From Columns To Rows

May 18, 2013

So, I have a column with data on rows as follows below. I need to arrange the data below in such a way that I have on first column the company name, second column the contact person and so on depending on what data is found (tel, e-mail, website).

The data is on rows and I have separated each company/group of data with a row between them. There are in total aprox 200 companies/groups of data that I need to arrange as explained above.

I have tried with transpose but I have to manually do it 200 times. I have tried with an indirect formula but the companies/groups of data do no have same amount of info/rows e.g. some lack the phone number or other data.

if there is a method to save the time and not arrange them manually.

Actinote
Contact: Toine Kets
Managing Director
Str. Tache Ionescu 3, Et. 5, Apt. 10

[Code]....

View 7 Replies View Related

Move Data In Columns If Rows Contains Particular Text

Feb 24, 2014

If the row contains a text like ABC in multiple columns in a sheet it has to copy the whole column from that sheet and paste special into another sheet.

View 2 Replies View Related

Excel 2010 :: Macro - Move Data From Rows To Columns

Dec 13, 2011

I am using Excel 2010 and need a macro that can convert data from rows to columns. I have read several posts about this subject but have no experience with macros and don't know how to change the macros to fit my scenario.

Here is what I currently have:

Account...Vehicle1...Loc1...Vehicle2...Loc2...Vehicle3...Loc3...Vehicle4...Loc4
11111......2008........FL
11111......2000........FL
12121......1999........GA
33222......2000........AL
33222......2011........AL
33222......2001........MS

Here is what I need it to look like:

Account...Vehicle1...Loc1...Vehicle2...Loc2...Vehicle3...Loc3...Vehicle4...Loc4
11111......2008.......FL.......2000........FL
12121......1999.......GA
33222......2000.......AL.......2011........AL......2001.......MS

There are up to 4 vehicles/locations per account number, and I need 1 account number per row (the dots above are for spacing only and not part of the actual data).

I could do this manually but because I have so many rows of data it could take days or weeks. Is there a macro out there that can do this??

View 3 Replies View Related

Move Data From 2 Columns Into Multiple Columns At Each Change

Feb 2, 2008

I am trying to write a macro that will take data from column A and use it as a column header in column C, and then take the corresponding data in column B and list it under the column header in column C. When the value in column A changes it will move on to column D and then list the corresponding data from column B underneath it in column D until all of the data in the 2 columns is spread across the worksheet. Example:..............

View 2 Replies View Related

Excel 2010 :: Move Part Columns Of Data From 6 Columns To Form 1 Large Column In Column A?

Jan 31, 2013

I have a large spreadsheet converted from pdf whose data still appears in A4 reading format.

I need to move part columns of data from 6 columns to form 1 large column in column A.

For example, move range B8 to B76 beneath range A8 to A76 and range C8 to C76 beneath that etc, page by page working through all 270 pages !

Also need to delete unnecessary 'page headers' throughout as in rows 2-6

View 2 Replies View Related

Move Rows Into Columns

Aug 11, 2013

I need a way to move every 7 rows into columns.

So rows 1-7 become columns 1-7, rows 8-14 into columns 1-7 etc.

View 3 Replies View Related

Move Every Two Rows To Columns

Sep 22, 2012

I have data that I want to move to columns:

-----A
1 Apples
2 Bananas
3 Oranges
4 Watermelon
5 Grapes
6 Kiwi

It should move every two rows to columns, like so:

-----A------------B
1 Apples-------Bananas
2 Oranges -----Watermelon
3 Grapes-------Kiwi
4

View 3 Replies View Related

Move Text Into Columns From Rows

Aug 22, 2009

I have a set of data that has a store number in cell A1, the store name in B1 and then the store address in C1, C2, and C3. This pattern repeats for all ~300 stores. I am trying to get all of the store data on one row per store.

I have a set of data that looks like this:

View 6 Replies View Related

Move & Transpose Columns To Rows

Aug 16, 2008

We have to copy from lot of Java webpages

1. Data of single column 3 rows of data to First blank cell in 'C' column (say C6)

2. Then Transpose it across to the same row into 3 columns (from same C6 to d6 & e6)

Here I tried some VBA but needs how to put it across....

View 4 Replies View Related

Sort Multiple Columns, With Blanks, And Move All Columns Into One

Feb 15, 2010

I found this code on Ozgrid to sort all columns of a worksheet that were continuous with no gaps or spaces that works well:

Sub CopyToA()
Do While ActiveCell <> ""
Range(ActiveCell, ActiveCell.End(xlDown)).Cut Destination:=Range("a65535").End(xlUp).Offset(1, 0)
ActiveCell.Offset(0, 1).Select
Loop
End Sub

However, I've tried to manipulate the code myself to 1) find all columns that aren't empty then 2) sort each column individually (WITHOUT expanding the sort to other columns) and 3) combining all the numbers into one seperate column. There are many posts concerning sorting but not one that addressed this particular situation.

View 2 Replies View Related

Move Row Data Into Columns?

Jan 28, 2014

Date
Product
Pass
Fail
Repair
Group Product 1
P
F
R
Group Product 2
P
F
R
Group Product 3

[code]....

I currently have raw data in Sheet 2

On sheet 1 would like to get the summary of the data as posted in the picture... unfortunately there are "groups" in the raw data and I need them separated and conformed to get an accurate picture.

View 1 Replies View Related

Move Columns With No Data In Them One To The Left?

Feb 20, 2014

I have a big table with a lot of data in it. I basically want to get rid of all of the empty cells, so that all the data that is there for the one person is all next to each other.

All the people's names are in a row for themselves so the empty cells would have to move to the left.

View 3 Replies View Related

Move Data From One Column To Multiple Columns

Jan 12, 2008

I am trying to move information that is pulled from a database to look cleaner and easier to read. All of the information exports out into column A only. The attachment is a brief example of what it looks like, and what I’m trying to get it to look like.

I want to move the data in col A to 5 columns C through G in groups of 16 rows. Once the last column is filled with a group of 16, it needs to fill below the first group of 16 in column B onward to column F. It should repeat this process until there is no more data in A. The attachment shows it much better than i can explain it.

I have some basic experience with formulas and macros, but I haven’t had any luck trying to manipulate any of them to give me the information the way I have shown. I would prefer to not have to manually type or cut and past the information in if possible.

View 6 Replies View Related

Remove Empty Rows Based On Range Of Columns If Columns Are All Empty (no Data) Delete

Oct 24, 2012

Using the following code to remove empty rows based on whether a specific range of columns is empty. The code works if the cell has a zero, but not when the cell is blank. An example of the data is attached.

VB:
Public Sub DelRows2()
Dim Cel As Range, searchStr, FirstCell As String
Dim searchRange As Range, DeleteRange As Range

[Code].....

View 1 Replies View Related

How Do I Stop The Previous Data From Being Wiped Out Once I Move On In Columns

Jan 30, 2007

=IF(AND(EOMONTH(TODAY(),COLUMN()-2)<TODAY(),(TODAY()<EOMONTH(TODAY(),COLUMN()-1))),Sheet2!C10,"NO VALUE")

The above formual resides in each cell in row 1 column g inclusive.

The question is when I move over columns the previous column with figure is wiped out because false "no value" becomes true.

How do I stop the previous data from being wiped out once I move on in columns?

View 14 Replies View Related

Move Data In 1 Column To 4 Different Columns Keeping Same Order

Sep 22, 2008

I have a table with one column of data. The data in this column repeats with 4 relevant pieces of information that I want to put in 4 different columns (fields) in a different spread sheet (or the same would work better and I would just delete the first column when done) keeping the same order the data is now in.
The data currently repeats in a regular pattern (i.e. 123412341234 with no other data in between). I would like to do this with a macro. Could someone help write a macro that will do this

View 9 Replies View Related

Move Data From Single Column To Multiple Columns

Feb 29, 2008

I saw this thread from June Cut & Paste Macro: Move Address From Column To Row and I think this what I would like to have my macro do. I have one column which is copied and pasted as text in excel and there is several blank rows.

I attached the spreadsheet example - it has 40 lenders, with the top row being the lender name (A1), followed by address(A2), city-state (A3), two blank rows(A4-A5), lender type (A6), approved date (A7), one blank row (A8), lender specialty (A9), telephone (A10) , e-mail address(A11) and two blanks rows (A12-A13) and A14 starts over again. For this example there should be 8 columns and 40 rows (lender name, address, etc...). As I mentioned I think the previous thread's macro would work with some minor tweaks. I couldn't figure out the best way to handle the blank rows and or remove the blanks and what to add or take out of the macro code.

View 2 Replies View Related

Excel 2007 :: Move Recurring Data From 1 Column To Multiple Columns

Jun 6, 2014

I am using excel 2007. I have data which, instead of being posted on multiple columns, is all within 1 column. The data most simply has the characteristics of:

AAA
AAA - description
BBB
BBB - description
CCC
CCC - description
and so on..

I would like to move the descriptions from column A to column B:
AAA AAA - description
BBB BBB - description
CCC CCC - description
and so on...

What would be the best way to accomplish this?

View 4 Replies View Related

How To Move Data In Various Cells To New Columns Based On Search On Primary Column

Feb 4, 2014

I have a sheet which I need to arrange and it looks like -

Column A
Column B
Column C
Column D

[Code]...

the values in Column B, C , D , E & F need to be in new columns based on what we have in Column A associated with "1"

Output should be -
Column A
Column B
Column C

[Code]....

so whatever is in Column A associated with "0" should remain in place whereas whatever is in Colimn A associated with "1" should get added to the new columns. 0 and 1 resembles the 1 Records which are used as a split to normalize the data.

View 9 Replies View Related

How To Match Data In Two Columns And Also Move Data To Appear On Same Row

Sep 25, 2013

I have names is Column A (about 200) and names in Column B (about 800) along with additional info in other columns. Column A was just added to an existing spreadsheet and will be deleted once I accomplish my task. The goal is to come up with the 200 names in column A along with the additional info in the other columns (address, phone) and to delete all of remaining names in B (about 600, 800-200) I'm trying to figure out the most efficient way to do this. I'm not sure if there is a function to match the text in Column A to Column B and at the same time move the row in Column A to match the row the name is located in Column B.

For example John Smith is currently in A1 and John Smith is in B7 and then John's phone number is in C7. I want the John Smith in A1 to move to A7. If I can make that happen for all 200 names I will then delete all rows with no entry in column A.

View 1 Replies View Related

Moving Data From Rows To Columns And Delete Repeated Rows

Apr 16, 2014

removing duplicate rows and move other data frm rows to columns.xlsx.

I am attaching a sample excel sheet showing what I need to do.In the first tab, I have a list that includes duplicate rows (first column only). I want to remove those duplicate rows but I don't want to lose the data in the following columns which can be unique or duplicates as well.

see the desired result tab in the sheet to get an idea of what I am looking for as the end result.

Keep in mind that the actual source file I am working with could have up to 50000 row, and the expected results could be around 2000 rows. So nothing can be done manually.

View 5 Replies View Related

Add 2 Columns Then Move To Next 2 Columns?

Jul 5, 2012

My question is if I have the data like this

Column A B C D E F G H
Data 1 2 5 5 4 4 3 9

I need to use the mouse to drag to from left to right to get this result

Result 3 10 8 12

View 7 Replies View Related

Transpose (switch) Rows Into Rows And Columns Into Columns?

Jul 28, 2013

i need to mark some row (which has some content written in), mark other row(with data too) and switch/transpose them mutual. when i was trying transpose method, which is using for switching rowns and columns, it wrote me error, that data are overlapping. it means it cant work on same things (rows > rows, columns > columns).

View 14 Replies View Related

Turning 64 Rows And 18 Columns Into One Row With 1152 Columns

Aug 10, 2008

I have individual data files (one for each participant). Each file has 64 rows (one for each trial in an experiment) and 18 columns (one for each variable). I would like to create a master data file in which each participant is represented in a single row. I will then have 1152 columns (18 columns for the variables, repeating 64 times so that each trial is represented).

In other words, my individual data files look something like this:

Participant 1 (title of data file)

Trial/var1/var2/var3
1 55 43 65
2 54 43 56
3 33 23 56

and I want to compile all the data into a single file that looks like this:
Participant/Trial1_var1/Trial1_var2/Trial1_var3/Trial2_var1/Trial2_var2/ ...
1 55 43 65 54 43
2 . . .

I know how to record macros and use IF, THEN, AND, & SUMIF statements creatively, but that's about it. I was hoping to record a macro that I could use on each individual data file to turn it into a single row, and then paste each row into the master file.

View 9 Replies View Related

Rows To Columns With A1 Data

Nov 16, 2009

I am trying to sort out some item numbers with their page numbers.

My file is in the following format:

View 6 Replies View Related

Using Sumproduct With Data In Rows And Columns

May 18, 2014

See attached template I am working on. I want to calculate the number of hours worked over specific dates e.g. between 19-25 May 2014 and 26-31 May 2014 for employee "Bird, Ken" - the result is to be placed in cell D19. Tried sumproduct but without success.

celeste template.xlsx‎

View 2 Replies View Related

Convert Columns To Rows With DATA

Aug 5, 2008

i have a problem in copying many columns to to rows that originally contains data, this is gonna be really complicated so here is wt i want, let's assume i have this table .....

View 6 Replies View Related

Data In Columns To Rows (not Transpose)

Nov 19, 2008

I am trying to clean up some data, which is organized horizantally AND in rows, as per the attached screenshot.

The fact that there is data horizontally across seven week days and in rows for the weeks of the year makes it impossible for me to use the simple TRANSPOSE feature, of which I am aware...

I have quite a couple of worksheets I need to apply this operation on, so manual work is the worst solution...

View 13 Replies View Related

Getting Data From Columns To Rows Without Using Transpose

Mar 26, 2009

I have an excel spreadsheet which contains data for customers and the last date they were seen at an appointment (along with various other bits of info).

The way the data is exported from my database package means that each customer has one row per appointment, i.e. row 1 contains john smith, 01/01/2009, row 2 contains john smith, 03/03/2009, row 3 contains john smith 01/04/2009, row 4 contains joe bloggs 12/02/2009, row 5 contains joe bloggs 27/03/2009. Some customers may have 4 or 5 appointments listed whereas another customer may only have one. I need to get the appointments all onto one row per customer so that I can calculate the number of days between appointments. I have tried to use transpose, but with 8000 rows it takes forever.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved