how to extract names from a worksheet and put them in another by alphabetical order?
There are 6 “could be more” blocks of data on Monday’s Worksheet, not all rows of each block will be filled. The idea is put the data from Monday WS in List WS without spaces and by alphabetical order. Because my English is not good enough, I attached a file with what I need.
Work have just upgraded from 97 to 03 (very with the times ) and when opening multiple workbooks, 03 behaves differently.
With 97 I could select many sheets from the open window and excel would open them in alphabetical order. Now we've moved to 03, the order seems to be completely at random. It's a real pain, as the set up of the workbooks we use has everything linked together. In order to keep everything working sweet, various groups of workbooks need to be open at once. Previously it was easy to find a workbook in the task bar, but now they're scattered everywhere. We don't use a set list of workbooks - the selection we need to open varies quite a bit, but there's usually at least 20 or so.
I have a spreadsheet saved with one worksheet with all the results on it and 130 worksheets with calculations on them, each with its' own named tab along the bar at the bottom of the page. What I'd like to know is if it is possible to sort the tabs into alphabetical order so I don't have to roam through up to 130 to find the tab (and it's corresponding worksheet) I'm looking for.
View 2 Replies View RelatedI'm trying to get this formula to work across multiple worksheets. It suppose to list names in alphabetical order. I'm using these define names to get it to work. Also may I have another formula that list unique names in alphabetical order?
Col_A=T(INDIRECT("''"&XWSLST&"'!A"&(2+MOD(S,N))))
N=50
S=ROW(INDIRECT("1:"&(N*ROWS(WSLST))))-1
WSLST=Sheet6!$D$2:$D$5
=IF(ROWS($E$2:E2)<= COUNTIF(Col_A,"?*"),INDEX(Col_A,MATCH(LARGE(COUNTIF(Col_A,">"&Col_A),ROWS($E$2:E2))=S+1,COUNTIF(Col_A,">"&Col_A),0)),"")
Example Data...
----A---B---C
1---B---1---
2---A---2---
3---E---5---
4---C---4---
5---D---6---
6---G---3---
7---F---6---
I have this formula in cell C1, filled down to C7:
=IFERROR(INDEX($A$1:$A$7,SMALL(IF($B$1:$B$7>=5,ROW($A$1:$A$7)-ROW($A$1)+1),ROWS(C$1:C1))),"")
This creates a list of cells from column A where the correspsonding value in Column B is greater than or equal to 5.
RESULTS:
----A---B---C
1---B---1---E
2---A---2---D
3---E---5---F
4---C---4---
5---D---6---
6---G---3---
7---F---6---
Any way that would generate these cells in alphabetical order making it look like this:
----A---B---C
1---B---1---D
2---A---2---E
3---E---5---F
4---C---4---
5---D---6---
6---G---3---
7---F---6---
Jason.CellsThatMeetConditions.xlsx
For Instance i might have a cell with the value 30KDPA
the one right below this needs to be 30KDPB
then 30KDPC
basically the last letter is going through the alphabetical order. Once it hits Z it should go to AA, AB, AC . Just like an excel file.
If i select the first cell and just drag it down it copies that exact same cell value.
Basically, I have two columns:
In column D I have some postcodes, and in column E I have areas. They are all with their according area, but I have them mixed up.
So: How can I put Column E in alphabetical order so that Column D shifts accordingly.
Example:
POSTCODE1 --- North West
POSTCODE2 --- South East
POSTCODE3 --- North West
I want it to shift them so it ends up like this:
POSTCODE1 --- North West
POSTCODE3 --- North West
POSTCODE2 --- South West
I have made a fashion line sheet which has data and images put inside border boxes, which looks like this:
[URL]
Now the line sheet is in alphabetical order but my boss now wants me to put extra designs in it, meaning i have to move everything around but with it still being in alphabetical order and keeping the same format. Is there any way of moving them around with out having to do it manually one design at a time?
if it is possilbe to get a combo box (from the forms menu) to list the names in alphabetical order? i cant sort the column where the information is taken from in alphabetical order as there is another column sorted in that range. i have a long list to go through and sometimes it can be difficult finding names.
View 9 Replies View RelatedI have a spreadsheet for work that consists of various columns of data. One important sorting column would be Job #. Inside this coulumn are data like 134-Q and 2355-P and 755-P for example. The sort now is like posted. I would like to be able to sort by both alphabetical and numerical order. ie, 755-P, 2355-P, then 134-Q.
View 5 Replies View RelatedSo i have a column full of first and surnames (both names in one cell). Is there a fast way to arrange them in alphabetical order? (surnames)
View 2 Replies View RelatedI have this formula below it will list uniques from column A but I would like it return in a alphabetical order. Is there a way to add that condition in the formula below a all in one formula?
=INDEX($A$3:$A$23,MATCH(TRUE,ISNA(MATCH($A$3:$A$23,C$2:C2,0)),0))
Example:...
I was wondering if there could be a way for a macro to Look at the column i have in this example and have it end up like the ends up with tab.
I start of with the "starts off with tab", and manually enter letters till i get the ends up with tab.
Basically the macro needs to look at the column and see where the yellow pointers are. From here it should Put letters in alphabetical order starting with A, ( once it hits Z it should go to AA, AB , just lik excel columns are named after Z ).
SO where ever the yellow box is , it should have a new letter in alphabetical order, everything below the yellow box till a new box will be that same letter.
MY example tab of the column finished should explain what i need and help clear any problems i presented here.
How do you make a column automatically place items in alphabetical order?
Also, how do you make a column automatically put dates in order?
Spreadsheet consists of the following:
Worksheet 1
B10 : B49 = Names
AO10 : AO49 = Amount
Worksheet 2
I want it list the Names only from highest to the lowest from worksheet 1. If two Names have the same total then I want it in Alphabetical order towards who will be listed first.
Example:
Worksheet 1
B10 Sam AO10 10
B11 John AO11 14
B12 george AO12 16
B13 Steve AO13 9
B14 Carlos AO14 9
Worksheet 2
george
John
Sam
Carlos
Steve
In Cell A1 i have a text string of "ABS9E8C2D" i want something is cell B1that will arrange the string in Alphabetical order for Letters, then increasing order for numbers "ABCDES289".
View 7 Replies View RelatedIs there a way to sort out the sheets into alphabetical order in excel 2010?
View 5 Replies View RelatedI have excel 2007, I have a spread sheet with approx 80 worksheets. The document grew over the year of 2010 and is not in alphabetical order. I am starting this new year wanting to have the tabs in alphabetical order. I looked in the DATA sort option...but looks like its is worksheet specific. How to make the tabs sort in alphabetical order...
View 5 Replies View RelatedI need to sort a horizontal bar graph, with the Y Axis in alphabetical order.
View 6 Replies View RelatedI use this formula, but it only works if I provide the first name on the list, otherwise I get 0 in all rows, instead of the unique values in alphabetical order.
Code:
={IFERROR(INDEX($A$2:$A$200;MATCH(TRUE;COUNTIF($A$2:$A$200;"
I am in the middle of writing my first macro using VBA, and have come to a point where I have no idea how to write a piece of code.
Here is an explanation of what the relevant section of the document looks like:
The following is all in Column A: ....
An original text string entry appearing in an Excel cell would be:
"N7C Neuroprotective J5Z Antiviral, other M2Z Antiarthritic, other J5A Antiviral, anti-HIV"
I need to extract N7C, J5Z, M2Z and J5A from this string and list these alphanumeric values in separate cells adjacent to the original text string. The challenge is that these alphanumeric references may appear in different positions within the original string with no fixed value e.g. a "," separating them. The alphanumeric references may also be 3 or 4 characters in length and there may be different numbers of alphanumeric references in the original string.
Another example would be (very different from the first):
"T2Z Recombinant, other K5B Radio-chemoprotective J3Z Antibacterial, other D3A Vulnerary A10C Symptomatic antidiabetic K6Z Anticancer, other R8A Antiasthma B6A Septic shock treatment I1Z Immunostimulant, other S1Z Ophthalmological R8B Antiallergic, non-asthma M1A1 Anti-inflammatory"
You can see that in this further example "A10C" & "M1A1" are 4 character alphanumeric strings wheras the others feature 3 characters.
Using Excel 2010. I'm writing a macro that sets up a workbook to be used for estimating at the beginning of a project. In the code I need to create multiple tables (formerly known as "lists") in the workbook. Then later in the code I need to refer back to those newly created tables. Currently, the code that creates the table is part of a loop that creates the table on many different worksheets. The problem of course, is that I have to name the Table, and then it won't create a table of the same name on the next sheet. Then, later in the code, I need to make adjustments to the table that was just created before looping to the next sheet.
Is there a way to create a table without giving it a constant name? Or by giving it a name that builds off of other info in the sheet? For example, I would be good with the naming the table after the sheet name: "Sheet1_Table" or such.
Code:
Sub Auto_Open()
'
Dim sht As Worksheet
If Range("A1") = 1 Then
[Code].....
I have a spreadsheet that contains two input tables: Parallel and Perpendicular. Next, the user can select a group (from a drop down) which a certain entry belongs to. Now what I want is a "summary" of these entries in a table that has no blank rows and combines both Parallel and Perpendicular entries by the Group. There is no fixed number of inputs for any one group i-e the solution has to be dynamic.
Attached is a file illustrating the inputs and the required output. I would prefer a formula based approach but not against VBA based suggestions either.
Sample_file_summary.xlsx
Also posted at: [URL] ....
Im trying to make a simple macro for cataloging some equipment and where its located.
I've created a user form where there is a free text field for Equipment. Instead of just inserting this entry into the first available cell, i would like for it to place it in the first available cell under the corresponding first letter of the equipment to the named worksheets A-Z.
I have named the worksheets A through to Z, and upon entering the free text 'Equipment' name, say for instance Trolley, for it to recognise the T, open the worksheet named T and insert the equipment name and location etc across the first free column.
I have a range of cells B2:20 which has text in it. The range is sorted by cells A2:20, and I would like to do this without doing another sort if possible. The data looks like this in column B:
CTR848
AWT101
LMT177
AZG884
BRE112
BCW333
CTQ553
In one single cell (O1), I'd like to have the information:
AWT101
Is this possible to do without using VBA?
I have a lot of data to try and summarize but they are in multiple smaller tables. I wish to only extract 2 variables, 'number' and 'total' from all of my smaller tables (lots of them) so the problem looks like this, i have these tables for example where the 'total' title is in a different column depending on which of the smaller tables you are looking at:
cat 1
cat 2
cat 3
total
[Code]....
I am trying to get:
number
Total
123456
30
234567
60
[Code]...
Because the number column is fixed and all of the smaller tables will all have a number in the same column maybe i can insert a column next to the number column and say "find the value where the column title is 'total' - however the location of the column title would change so not sure if this would work? I was also thinking of sorting the columns but that will not work either because of the smaller multiple tables?
I have about 50 - 60 text files and I need to find certain values, namely Name, Account No, total amount under Portfolio Value in the text file and copy these values to a worksheet under column: Name, Account and Portfolio Value respectively. All new entries are paste one row below the existing data.
Some of the text files may not have any data in it or may not have the Portfolio Value as the monthly transactions may occupied 2 or 3 text files. Some text files may have 2 Name in it and there will be 2 Portfolio Values in it which I will need both to be copy to the worksheet.
I have attached both the Excel file and the dummy txt file.
In column E of row 1 I have one column with a long line of text containing information in that should be separated into cells for the following fields:
Year, make, model, drive, part, name, phone, text, email, location, notes, stream, date/time, disclaimer
Here is an example of the text in column E:
Year: 2001 Make: Nasa Model: big spaceship Drive:
Automatic 2 Wheel Drive Spaceship:
4 12.7 Liter ----------------------------- Part: Hood -----------------------------
[Code] .........
The data in each field can be different lengths, and I would like to take pieces of text out of Column E, and put it in other columns in the row.
Each field has its own column, and I would like to copy the data for that field from the column containing all data to its respective column.
=MID(E1,SEARCH("Year:",E1)+5,SEARCH("Make:",E1)-SEARCH("object",E1)+5)
The formula above was inspired by an "extract text between two strings" post, but will not work.
I tried to make a formula that would extract everything between the strings "Notes:" and "Team Stream:" or for example, so I could get the result "Thank you for using our excel forum! thesmartestpeopleever.com" or "Year" and "Make" so I could get the result "2001" if using the example above. I was not able to do it.
I have attached a sample photo and an excel file.
How do I separate/extract each columns data to the appropriate column?
Attached Image : excel string pic.jpg‎
Attached File : excel string formula conundrum.xlsx‎
I want to extract tables from the .dxf drawing format for use in excel. I know it may sound strange to some of you but this indeed is my requirement. I tried very hard on net but could not get a converter for this task.
View 9 Replies View Related