I am in the middle of writing my first macro using VBA, and have come to a point where I have no idea how to write a piece of code.
Here is an explanation of what the relevant section of the document looks like:
The following is all in Column A: ....
I was wondering if there could be a way for a macro to Look at the column i have in this example and have it end up like the ends up with tab.
I start of with the "starts off with tab", and manually enter letters till i get the ends up with tab.
Basically the macro needs to look at the column and see where the yellow pointers are. From here it should Put letters in alphabetical order starting with A, ( once it hits Z it should go to AA, AB , just lik excel columns are named after Z ).
SO where ever the yellow box is , it should have a new letter in alphabetical order, everything below the yellow box till a new box will be that same letter.
MY example tab of the column finished should explain what i need and help clear any problems i presented here.
Example Data...
----A---B---C
1---B---1---
2---A---2---
3---E---5---
4---C---4---
5---D---6---
6---G---3---
7---F---6---
I have this formula in cell C1, filled down to C7:
=IFERROR(INDEX($A$1:$A$7,SMALL(IF($B$1:$B$7>=5,ROW($A$1:$A$7)-ROW($A$1)+1),ROWS(C$1:C1))),"")
This creates a list of cells from column A where the correspsonding value in Column B is greater than or equal to 5.
RESULTS:
----A---B---C
1---B---1---E
2---A---2---D
3---E---5---F
4---C---4---
5---D---6---
6---G---3---
7---F---6---
Any way that would generate these cells in alphabetical order making it look like this:
----A---B---C
1---B---1---D
2---A---2---E
3---E---5---F
4---C---4---
5---D---6---
6---G---3---
7---F---6---
Jason.CellsThatMeetConditions.xlsx
For Instance i might have a cell with the value 30KDPA
the one right below this needs to be 30KDPB
then 30KDPC
basically the last letter is going through the alphabetical order. Once it hits Z it should go to AA, AB, AC . Just like an excel file.
If i select the first cell and just drag it down it copies that exact same cell value.
Basically, I have two columns:
In column D I have some postcodes, and in column E I have areas. They are all with their according area, but I have them mixed up.
So: How can I put Column E in alphabetical order so that Column D shifts accordingly.
Example:
POSTCODE1 --- North West
POSTCODE2 --- South East
POSTCODE3 --- North West
I want it to shift them so it ends up like this:
POSTCODE1 --- North West
POSTCODE3 --- North West
POSTCODE2 --- South West
I have made a fashion line sheet which has data and images put inside border boxes, which looks like this:
[URL]
Now the line sheet is in alphabetical order but my boss now wants me to put extra designs in it, meaning i have to move everything around but with it still being in alphabetical order and keeping the same format. Is there any way of moving them around with out having to do it manually one design at a time?
if it is possilbe to get a combo box (from the forms menu) to list the names in alphabetical order? i cant sort the column where the information is taken from in alphabetical order as there is another column sorted in that range. i have a long list to go through and sometimes it can be difficult finding names.
View 9 Replies View RelatedI have a spreadsheet for work that consists of various columns of data. One important sorting column would be Job #. Inside this coulumn are data like 134-Q and 2355-P and 755-P for example. The sort now is like posted. I would like to be able to sort by both alphabetical and numerical order. ie, 755-P, 2355-P, then 134-Q.
View 5 Replies View RelatedSo i have a column full of first and surnames (both names in one cell). Is there a fast way to arrange them in alphabetical order? (surnames)
View 2 Replies View RelatedI have this formula below it will list uniques from column A but I would like it return in a alphabetical order. Is there a way to add that condition in the formula below a all in one formula?
=INDEX($A$3:$A$23,MATCH(TRUE,ISNA(MATCH($A$3:$A$23,C$2:C2,0)),0))
Example:...
How do you make a column automatically place items in alphabetical order?
Also, how do you make a column automatically put dates in order?
Work have just upgraded from 97 to 03 (very with the times ) and when opening multiple workbooks, 03 behaves differently.
With 97 I could select many sheets from the open window and excel would open them in alphabetical order. Now we've moved to 03, the order seems to be completely at random. It's a real pain, as the set up of the workbooks we use has everything linked together. In order to keep everything working sweet, various groups of workbooks need to be open at once. Previously it was easy to find a workbook in the task bar, but now they're scattered everywhere. We don't use a set list of workbooks - the selection we need to open varies quite a bit, but there's usually at least 20 or so.
Spreadsheet consists of the following:
Worksheet 1
B10 : B49 = Names
AO10 : AO49 = Amount
Worksheet 2
I want it list the Names only from highest to the lowest from worksheet 1. If two Names have the same total then I want it in Alphabetical order towards who will be listed first.
Example:
Worksheet 1
B10 Sam AO10 10
B11 John AO11 14
B12 george AO12 16
B13 Steve AO13 9
B14 Carlos AO14 9
Worksheet 2
george
John
Sam
Carlos
Steve
I have a spreadsheet saved with one worksheet with all the results on it and 130 worksheets with calculations on them, each with its' own named tab along the bar at the bottom of the page. What I'd like to know is if it is possible to sort the tabs into alphabetical order so I don't have to roam through up to 130 to find the tab (and it's corresponding worksheet) I'm looking for.
View 2 Replies View RelatedIn Cell A1 i have a text string of "ABS9E8C2D" i want something is cell B1that will arrange the string in Alphabetical order for Letters, then increasing order for numbers "ABCDES289".
View 7 Replies View RelatedIs there a way to sort out the sheets into alphabetical order in excel 2010?
View 5 Replies View RelatedI have excel 2007, I have a spread sheet with approx 80 worksheets. The document grew over the year of 2010 and is not in alphabetical order. I am starting this new year wanting to have the tabs in alphabetical order. I looked in the DATA sort option...but looks like its is worksheet specific. How to make the tabs sort in alphabetical order...
View 5 Replies View RelatedI need to sort a horizontal bar graph, with the Y Axis in alphabetical order.
View 6 Replies View RelatedI use this formula, but it only works if I provide the first name on the list, otherwise I get 0 in all rows, instead of the unique values in alphabetical order.
Code:
={IFERROR(INDEX($A$2:$A$200;MATCH(TRUE;COUNTIF($A$2:$A$200;"
I'm trying to get this formula to work across multiple worksheets. It suppose to list names in alphabetical order. I'm using these define names to get it to work. Also may I have another formula that list unique names in alphabetical order?
Col_A=T(INDIRECT("''"&XWSLST&"'!A"&(2+MOD(S,N))))
N=50
S=ROW(INDIRECT("1:"&(N*ROWS(WSLST))))-1
WSLST=Sheet6!$D$2:$D$5
=IF(ROWS($E$2:E2)<= COUNTIF(Col_A,"?*"),INDEX(Col_A,MATCH(LARGE(COUNTIF(Col_A,">"&Col_A),ROWS($E$2:E2))=S+1,COUNTIF(Col_A,">"&Col_A),0)),"")
how to extract names from a worksheet and put them in another by alphabetical order?
There are 6 “could be more” blocks of data on Monday’s Worksheet, not all rows of each block will be filled. The idea is put the data from Monday WS in List WS without spaces and by alphabetical order. Because my English is not good enough, I attached a file with what I need.
Im trying to make a simple macro for cataloging some equipment and where its located.
I've created a user form where there is a free text field for Equipment. Instead of just inserting this entry into the first available cell, i would like for it to place it in the first available cell under the corresponding first letter of the equipment to the named worksheets A-Z.
I have named the worksheets A through to Z, and upon entering the free text 'Equipment' name, say for instance Trolley, for it to recognise the T, open the worksheet named T and insert the equipment name and location etc across the first free column.
Looking for a macro to insert a textbox with the textbox containing a formula rather then text.
Sub AddTextBox()
ActiveSheet.Shapes.AddTextBox(msoTextOrientationHorizontal, 2.5, 1.5, _
116, 145).Name = "Textbox1"
ActiveSheet.Shapes(1).Select
Selection.Formula = "=Manpower!R[3]C[1]"
End Sub
I tried this but I cant get the formula portion to work... I just want to insert a macro with that formula....
How can i copy contents of cells in desired format from one workbook to another in the following format with VBA code :
Code:
A!H1 to B!K1
A!H2 to B!L1
A!H3 to B!K2
A!H4 to B!L2
......
.......
I'm trying to copy text from 7 TextBoxes and a ComboBox in a particular order. The code below will do this but puts the ComboBox text at the bottom when the ComboBox is in position 1 (numerical order 2), is there a way to create an index of these controls by TabIndex then copy the text?
[Code] .....
Is it possible to export Excel cell contents to Word fields in a protected Word document? For example...
What code would be needed to tell Excel to open up, copy and export the contents of A2 in the active sheet of a workbook to "Field 2" in a Word document named "Report 01" and then put the contents of B2 to "Field 2" etc?
Do both applications have to be opened up at the same time or is Excel able to open up Word on its own? Will the macro be able to....
1. Automatically open up the correct Word document?
2. Look ONLY in a certain folder for the "Report 01" Word document?
or
Bring up a "selection" box that allows you to select the document you wish Excel to export it's data to?
3. Close and save the Word Document without any user intervention?
I need to be able to enter a number in a cell, A1 for example, activate a button, and have that value placed into a new row below in numerical order, then the entry in A1 deleted so more entries can be made
For example, if F1=6, G1=8 and H1=9, if I enter 7 in A1 and run the macro, a new row is created (G becomes H, H becomes I, etc) and 7 is placed in G1, A1 is cleared.
What I'm up to is inventory where the items are all numbered and more of the same number can show up with a larger number, like XXXX1 and XXXX2 that are the same item, or different item YYYY1 that may only show up once. Row gets deleted when inventory is removed from "back room" and goes to sales area so the list will only carry 40 or so items at any one time.
I have a textbox which displays a lot of text and I would like a VBA procedure which exports this text to a text file (.txt).
View 9 Replies View RelatedSo I have a need to enter multi-line notes. Using a merged cell not working for me so thinking best to use a Textbox.
This works fine for entering the notes but I need to replicate the content on another Tab in the same Excel workbook.
So lets say I have named my Texboxes 'Textbox1' on one tab, and 'Textbox2' on another tab...... how do I replicate the contents?
I've tried putting =Textbox1 into 'Textbox2' like you would for a normal Cell but that does not work.
I've created a textbox, call it Textbox1, where I've set EnterKeyBehavior and WordWrap to be true. If someone types something like
apples
bananas
cherries
in the textbox, and I use the following code
Code:
Dim TextBoxVal as String
TextBoxVal = Textbox1.Value
then TextBoxVal will be applesbananascherries.
I'd like to have the array be something like
apples,bananas,cherries, or
applesX_X_XbananasX_X_Xcherries,
or something else so I can tell when the user has hit the enter key. Is there any way to do this?