How To Insert Text Field Into Appropriate Worksheet Based On Alphabetical Value

Oct 10, 2011

Im trying to make a simple macro for cataloging some equipment and where its located.

I've created a user form where there is a free text field for Equipment. Instead of just inserting this entry into the first available cell, i would like for it to place it in the first available cell under the corresponding first letter of the equipment to the named worksheets A-Z.

I have named the worksheets A through to Z, and upon entering the free text 'Equipment' name, say for instance Trolley, for it to recognise the T, open the worksheet named T and insert the equipment name and location etc across the first free column.

View 4 Replies


ADVERTISEMENT

Macro To Insert Letters In Alphabetical Order

Mar 24, 2009

I was wondering if there could be a way for a macro to Look at the column i have in this example and have it end up like the ends up with tab.

I start of with the "starts off with tab", and manually enter letters till i get the ends up with tab.

Basically the macro needs to look at the column and see where the yellow pointers are. From here it should Put letters in alphabetical order starting with A, ( once it hits Z it should go to AA, AB , just lik excel columns are named after Z ).

SO where ever the yellow box is , it should have a new letter in alphabetical order, everything below the yellow box till a new box will be that same letter.

MY example tab of the column finished should explain what i need and help clear any problems i presented here.

View 8 Replies View Related

Insert Contents From Textbox In Alphabetical Order In Document

May 23, 2008

I am in the middle of writing my first macro using VBA, and have come to a point where I have no idea how to write a piece of code.

Here is an explanation of what the relevant section of the document looks like:

The following is all in Column A: ....

View 9 Replies View Related

Update The Worksheets Field Value Based On Updates Done In Main Worksheet.

Oct 8, 2007

How to Update the Worksheets field value based on updates done in Main Worksheet.
As i have two different worksheets (Which can be even more then 5) and i want to update the Column Field value of "State" in work sheet "B" & "C" based on the updates done in "State" Column Field value in Worksheet A.
I just want to update the "State" Column Field value in Worksheet "A" and it should update the "State" Column Field value in Worksheet "B" & "C". Only the criteria to match is Number. Based on number i want to search the values in Worksheet "B" & "C" and want that these values also get updated.

View 9 Replies View Related

Create New Worksheet And Copy Data Based On Date Field?

Apr 8, 2012

copy the excel sheet data from one sheet to another sheet?

-> I have one excel sheet (name: Test.xls, sheet name: SHEET1)

Sn Code Type next calib
5BPR CORR7-Apr-12
4BPR CORR7-Apr-12
73BPR CORR7-Apr-12
9BRG CORR8-Apr-12
10BRG CORR8-Apr-12
11BRG CORR8-Apr-12
17BRG CORR9-Apr-12
311DP CORR9-Apr-12
227DP CORR9-Apr-12
227DP CORI R9-Apr-12

Want to create a new work sheet and copy the today's date(next calib - filed name) records to new sheet.

Example: Today's Date is 8-Apr-12

So, I want to copy following record to new work sheet (when I click the button / run the macro).

Sn Code Type next calib
9BRG CORR8-Apr-12
10BRG CORR8-Apr-12
11BRG CORR8-Apr-12

View 3 Replies View Related

Sorting Multiple Worksheet Tabs In Alphabetical Order

Nov 24, 2008

I have a spreadsheet saved with one worksheet with all the results on it and 130 worksheets with calculations on them, each with its' own named tab along the bar at the bottom of the page. What I'd like to know is if it is possible to sort the tabs into alphabetical order so I don't have to roam through up to 130 to find the tab (and it's corresponding worksheet) I'm looking for.

View 2 Replies View Related

Names In Alphabetical Order Based On Totals

Sep 17, 2007

Spreadsheet consists of the following:

Worksheet 1
B10 : B49 = Names
AO10 : AO49 = Amount

Worksheet 2
I want it list the Names only from highest to the lowest from worksheet 1. If two Names have the same total then I want it in Alphabetical order towards who will be listed first.

Example:
Worksheet 1
B10 Sam AO10 10
B11 John AO11 14
B12 george AO12 16
B13 Steve AO13 9
B14 Carlos AO14 9

Worksheet 2
george
John
Sam
Carlos
Steve

View 9 Replies View Related

Text Search Insert A Row On A Second Worksheet

Mar 4, 2008

Sheet1 has 500+ rows and 30+ columns of data, sorted by text in column G (last name). I want to create a data input sheet for users to manually key in data. I need help to create a macro to cut and insert the row from the data input sheet into Sheet1 - the first row after it finds a match in column G. The text in G can only be one of ten different "last names".

It needs to be after the first event because of graphing from the data sheet.

View 12 Replies View Related

Insert Text Box On Worksheet In 2003

Aug 21, 2008

how i insert text box on excel sheet.
In which i take values from user and then manipulate those values on click event of button.

View 14 Replies View Related

Extract Text From Multiple Tables In Alphabetical Order

Oct 8, 2007

how to extract names from a worksheet and put them in another by alphabetical order?
There are 6 “could be more” blocks of data on Monday’s Worksheet, not all rows of each block will be filled. The idea is put the data from Monday WS in List WS without spaces and by alphabetical order. Because my English is not good enough, I attached a file with what I need.

View 2 Replies View Related

Return 1st Alphabetical Alphanumeric Text From Unsorted Range

Feb 15, 2008

I have a range of cells B2:20 which has text in it. The range is sorted by cells A2:20, and I would like to do this without doing another sort if possible. The data looks like this in column B:

CTR848
AWT101
LMT177
AZG884
BRE112
BCW333
CTQ553

In one single cell (O1), I'd like to have the information:

AWT101

Is this possible to do without using VBA?

View 7 Replies View Related

Macro To Preset Field With Text If Condition In Another Field Is True

Jun 9, 2006

I have a macro that imports a report. If the Charge Type in column A is BTOREPLX, I need to prefill the field next to it in column B with the text "REPLX", e.g. "REPLXCDROM". I've attached an example of the report.

View 5 Replies View Related

Macro To Insert Based On Worksheet?

Jul 25, 2014

I have a macro that runs in Sheet 1 and enters the word "Complete" in cell P of the active row. The same cell that requires the word "Complete" in Sheet 2 is in cell T of the active row. Is there a way to have the same shortcut that will identify which worksheet it is in and go to the appropriate cell?

Code:
Range("P" & ActiveCell.Row).Select
ActiveCell.FormulaR1C1 = "Completed"
ActiveCell.Offset(0, 1).Range("A1").Select

View 4 Replies View Related

Excel 2010 :: Pivot Table Add Calculated Field Based On Certain Text In Report Filter

May 29, 2014

Any way to create a calculated field in an Excel 2010 pivot table that will find all the Transaction Types (Report Filter) with "transportation" in them and make the field Quantity 0 and leave all other quantities the same? I do not want the quantity of transportation added in twice and may not have the flexibility of adding a column to the raw data.

I used the formula below in a calculated field and it does not match the values using the added column to the data file.

=IF(ISERROR(SEARCH("*transportation*",'Transaction Type')),Quantity, 0)

I am trying to get the sum of Quantity field to equal the AdjQuantity field using a calculated Pivot field and not add a new column to the data.

View 2 Replies View Related

Insert Data From Different Worksheet Based On Common Value

May 7, 2013

I have searched and there are some examples that are similar to what I'm looking for but I cannot seem to use those answers to make my problem work. The example from the forums that seems to match my problem the closest is [URL]....

Summary: I have an Excel file called "COST TEMPLATE.XLSX" that has product information (serial number, quantities, pricing), calculations and reports; then on a monthly basis I receive a file (VENDOR_EXPORT.CSV) with updated product quantities to be merged into the cost spreadsheet.

I would like to merge specific data fields from the VENDOR_EXPORT.CSV file into my cost template based on the serial number. I am attaching three dummy files that hopefully describes the issue:

1. COST TEMPLATE.XLSX
2. VENDOR_EXPORT.XLSX - which highlights the cells to be import and to which corresponding column
3. VENDOR_EXPORT.CSV - raw CSV file

My preference is to do this with functions, not macros. How to add the export into the existing workbook as a temporary worksheet, or just pull from the other workbook as CSV file.

View 3 Replies View Related

Insert A Number Based On A Text Value

Oct 13, 2009

I have a cell (B4)that may contain several different text values, i.e. Bill, Tom, John, Mike, Larry, & Dan. The value in cell D4 needs to relate to what text is in B4, i.e Bill = 6; Tom = 12; John = 8; Mike = 20; Larry = 15; & Dan = 10. I was trying an IF statement, but having trouble.

View 2 Replies View Related

Insert Text In Cells Based On Another

Mar 12, 2008

I have an excel sheet that looks like this:

IMAGE 1

(The sheet holds more data but not needed for this)

I have two buttons; “BUY” and “SELL”

I need a vba-code that inserts either “BUY” or “SELL” in row 6 (buy/sell) and insert a text (code) in row 7 depending in this information. When I push either “Buy” or “Sell”

IMAGE 2

So.. When I push the button “SELL” (already made) the action “Switch” should get “Sell” and actioncode “SO”, and “Redem1” and “Redem2” should get “Sell” and actioncode “RA” and “RN”

So.. When I push the button “BUY” (already made) the action “Switch” should get “Buy” and actioncode “SI”, and “Subsc” should get “Buy” and actioncode “SA”

(When the button is pushed I have a autofilter that “hides” either all the “sell” or all the “buy”)

IMPORTANT: There is NO range!! the list goes on, and changes so I need it to work on x amount of rows. !

View 3 Replies View Related

Insert Row Macro Based On Text String

Nov 20, 2009

I'd like to adapt my macro so that it would insert a blank row after it detects the the first 16 characters of text as "'Closing Balance"; or it could even detect "'Closing" as the first 8 characters if it would be simpler

The Data Begins in Row 5 of Column A

My Current Macro is as below which I have adapted from another one I used

It is not working since it is detecting for the exact text "'Closing Balance" whereas the data registry would write "'Closing Balance as at 31/10/2009" , of which the "as at dd/mm/yyyy" portion would change every time a report is exported, but the first part "'Closing Balance" or even just the word "'Closing" will always be the same.

View 6 Replies View Related

Insert Rows Based On Text Values In Cells?

Feb 20, 2014

I regularly run a report that comes out in a slightly different format each time depending on whether or not there is data for specific criteria. for instance (sample attached): criteria a, b, and c are in rows, 1, 2, and 3 in columns. a, b, and c are expected to repeat themselves several times. if there is no data in one instance of b then you may see something like abcacabc.

I'd like to loop through each row in column a, check to make sure that it is the correct value (either a, b, or c) and if not, insert a blank row so I can then copy the data to my final project without having to worry about formatting.

the example above would then become abca cabc

View 3 Replies View Related

Insert Text As Comment On Another Sheet Based On Date

Jan 18, 2013

Is it possible to insert text as a comment on another sheet based on a date?

I have Sheet 1, that has 3 columns, Name, Date, Reason

Sheet 2 is a monthly calendar with the dates in E5:AH5 and the names from D6:D10.

What I am trying to do, is when they enter their name, date and reason on sheet 1, I want the reason to to be inserted on sheet 2 as a comment in the cell that matches the date and the name.

View 1 Replies View Related

Insert Vertical Text In Cells Based On Textbox Input

Jul 25, 2006

I am designing a from with a variable number of titles. The user should be able to insert a title into a column by typing in the title that he wants into a text box, and pressing a command button that I have created ( named add). The problem arises when I try to get the text to lie vertically as opposed to horizontally (in the cell, not as a text box. If this can only be done as a textbox, let me know). Is there any way to do this?

View 5 Replies View Related

Concatenate Two Text Fields BUT Left Adjust First Field And Right Adjust Second Field

Jun 22, 2012

I want to concatenate two Cells into a single cell BUT have the first field left justified and the second cell right adjusted.

A1 = "John Williams", A2= "Single"

A3 = "John Williams Single"

View 1 Replies View Related

Insert 0 At Beginning Of Field Depending On Number Of Characters

Dec 27, 2012

Example below of the data I have. I need to convert dates into DD.MM.YY (8 chars) for SAP. I receive spreadsheets where the date is dd/mm/yy and I use the replace to convert the "/" to ".", then format this column as TEXT. My problem is some of these sheets have hundreds of records and rather than individually scroll through and look for data that requires the "0", is there a way to insert this. I can custom format that it looks as it has the zero, but it is not in the true data.

1.10.12 data should be 01.10.12
11.10.12 this is correct
3.11.12 data should be 03.11.12
3.06.12 data should be 03.06.12 etc

View 5 Replies View Related

How To Insert Leading Zeroes Into Mixed Letter Number Field

May 5, 2007

I have a column of data that is given to me that is a mix of letters and numbers and I need the numbers to have leading zeros, they must all be three digits. The data has either 3, 4, or 5 letters followed by numbers 1 through 999. Example: ABCD7 I need to change it to ABCD007. I am using Excel 2004 for the Mac.

View 9 Replies View Related

Find Field Values In One Worksheet But Not In Second Worksheet

Feb 14, 2009

Starting with one worksheet with end date as one of the columns. I filtered the worksheet with end date > (certain date) and copied the results to a second work sheet.

The original worksheet has all courses with end dates from 1998 to 2009. The second worksheet has all courses with end dates > 2004.

How do I find out which courses have end < 2004. But do not also have an end date > 2004.

What I am trying to do is determine which courses are not longer being used since 2004.

View 10 Replies View Related

Moving Rows To Another Worksheet Based On Text In A Cell

Nov 30, 2012

I would like to make a macro that will move rows from one worksheet to another worksheet.

I have an excel spreadsheet with multiple columns and rows, within one of the columns there is some text that refers to SOS or County, I need to move everything that has SOS to another worksheet title UCC SOS and everything that has county to be moved to another worksheet title UCC County. Here is a sampling of the worksheet

Account
Primary Borrower
Corp
Status

[Code]....

View 7 Replies View Related

VBA Macro To Multiple Text Files Based On Headings On Worksheet

Apr 2, 2009

I have created an Profit&Loss excel sheet with all the accounts in column A and then the values for each month, January to December in column B to column K like this:

Column A...............Col B............Col C........Col D........Col E.....and so on
Account 1..............2222............58452........5255.........5844....
Account2................5.................45...............25...........458 ....

I've made a macro that creates a textfile and saves it on my desktop, but I get a text file with all the info in the same file, what I want is to get one text file for every month, that is text file number one(january) is: The heading info+column A+columnB

text file number two(February) is: The heading info+column A+columnC
text file number three(March) is: The heading info+column A+columnD and so on

In the heading info I have to state the period and then I need the macro to change this for every text file, that is for the january file it has to be "1 to 1", for february "2 to 2" and so on. As it is now it will always say "1 to 1" because that is the values I have entered.

Sub btnSkapaFil_Klicka()
Dim strAnv As String
Dim strBeloppJan As String
Dim strBeloppFeb As String
Dim strBeloppMars As String
Dim strBeloppApr As String
Dim strBeloppMaj As String
Dim strBeloppJun As String
Dim strBeloppJul As String
Dim strBeloppAug As String
Dim strBeloppSept As String
Dim strBeloppOkt As String
Dim strBeloppNov As String
Dim strBeloppDec As String
Dim strSavepath As String
Dim intRad As Integer
Dim intStartrad As Integer
Dim intSlutrad As Integer
Dim fs, a
strOrder = Range("I2")...............

View 2 Replies View Related

VBA Loop Through Worksheet And Format Each Column As Text, Or Date Based On Header

Jun 30, 2006

I am trying to figure out a way to condense my code (improve my code) Right now I am using a Macro in Excel to go through a workbook by selecting each column individually and if there is something in the header then formatting that column as text. The problem with the way I am currently doing it, is that due to size limitations on the VBA code, I can only select columns A to Z, and if there is more data in the worksheet it is not formatted. Also I would like the code to check the header and if the word date is in there, format it as a date instead. Also if there is a way to delete any invalid ranges in the workbook

Sub Format()
Dim VarFileName As String
Dim VarPath As String
Dim VarSavein As String
Dim wsheet As Worksheet
VarSavein = Sheets("sheet1").Range("C2").Value
VarFileName = Sheets("sheet1").Range("A2").Value
VarPath = Sheets("sheet1").Range("B2").Value
Workbooks.Open VarPath & VarFileName
For Each wsheet In ActiveWorkbook.Worksheets
Sheets(wsheet.Name).Select
Columns("A:A").Select
Selection.TextToColumns Destination:=Range("A1"), DataType:=xlDelimited, _
TextQualifier:=xlDoubleQuote, ConsecutiveDelimiter:=False, Tab:=True, _
Semicolon:=False, Comma:=False, Space:=False, Other:=False, FieldInfo _
:= Array(1, 2), TrailingMinusNumbers:=True..........................................

View 3 Replies View Related

Copy Pivot Table Data To Worksheet & Name Them As Per Their Field Name

Oct 23, 2007

I've tried my best to describe my dilema. I import data in an SQL query from a mainframe. This data shows a job number, site address, job number and a length. Multiple lengths on the same site appear as separate entries. I use a pivot table to calculate a total length and also formulas to determine whether a site is in an East or West area. I then need to then be able to copy the 'East' jobs to an 'East' worksheet and the 'West' jobs to the 'West' worksheet. But, I only want a site to appear once with the total length.

View 2 Replies View Related

Insert A Row In A Worksheet - Sheet 1 Is Copied Into A Second Worksheet?

May 29, 2014

when I insert a row into the sheet called WBS - Explanation, it only copies over into columns A:D in my worksheet called Timeline & Key Tasks. Unfortunately, I need the whole row to be inserted in the Timline & Key Tasks worksheet.

I can see how the coding has been set up and why this is happening, unfortunately I don't have the knowledge to workout how to change it to the code to include the whole row without deleting information, which I don't want to do.

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved