I have data resembling the following
Col A
Sun
Sun
Sun
Sun
Col B
12/08/2007
13/08/2007
14/08/2007
15/08/2007
Col C
A
B
C
D
Is there a formula where I can extract the entire row for the most recent date, in this case Row 4 containing Sun,15/08/2007,D would be returned.
I have one spreadsheet with a list of materials by material number. I have another with all sales activity. How can I pull into the first spreadsheet the date of the latest activity from the second spreadsheet?
View 2 Replies View RelatedI have a workbook to keep track of names and dates of a specific action. There are 10-15 names that recur on the list. The most recent action is added to the bottom of the list. The names are in column I and the date of the action is in column J.
The problem is having to scroll through the list to find the most recent action for each person. Ideally i'd like to have a list of the names in column N and then in column O the most recent date in the list for each name.
Looking at a series of rows that contain dates (in one column).
Return the value of the cell in the column next to the most recent date.
I can get the most recent date using MAX, but how do I tell Excel to return the value of the cell next to it?
I want to lookup an ID which there may be three of, but I would want the most recent date out of the three ID. I can get this to work by putting the column in ascending order but this is not very practical.
Is there any way I can do a lookup and add a date parameter to lookup the most recent?
I have a list of numbers column A and a list of dates in column b, i need a formula which looks up the most recent for each of the numbers. can this be done?
View 3 Replies View RelatedHave a sheet with 24K rows. Column A is client name. Column B are check dates. The info is sorted by client then check date. Clients can have one to many check dates, so I client is listed as many times as there are check dates. If ten checks, then ten rows for that client. One check then one row for that client.
I only want to keep the last/most recent check date for each client, deleting all other rows for that client with check dates before the most recent. I believe I need to step through the file comparing column A, row by row, to see if I have a match for the next row in A. If no match I keep that row, because there is only one check, and move down one. If a match, then I delete the current row.
How to code this is my problem. Is it a loop?
I'm trying to put a report together that shows the most recent salary increase for each employee. Below is a snap shot of what my pivot looks like - How can I format the report to only show the most current change - Which in this case would be the 2 highlighted rows....
View 1 Replies View RelatedI've searched the site, but have not found anything that matches what I want to do. I have a statistical spreadsheet that tracks machine accuracy by date. The spreadsheet has multiple columns per worksheet. The info is entered and sorted by date with oldest date first. I want to set up a seperate worksheet to find the most recent date from several different columns and populate it in a seperate cell. From there I'll do some calculations to identify how long it has been since a particular machine has been accuracy verified. Is there a formula to do this or does it have to be done through a macro?
View 3 Replies View RelatedThe data in my spreadsheet will have a column of dates that will change depending on info input in another cell.
What I need is a formula that will give me the most recent date for lets say 2012
04/01/13
03/01/13
02/01/13
01/01/13
12/27/12
12/25/12
12/12/12
12/02/12
if use the max function I get the 4/1/13 result, what I need is a formula that will return the 12/7/12 number.
I've been trying to create a pv table that will count all the trades based on products, but they are duplicate in my set of data that I am trying to eliminate, I just want to select the trades with most recent date and if there are duplicates entries with the same date, then to select the aging column..
Column A are my trade IDs (duplicates trades), column G my dates and column O my aging days (goes up to >5). What I'd like to do is to count the trade using the most recent date and if the date is the same use the aging column. is this even possible to do using formulas?
I have used the MAX function to populate the most recent date in a series.
-EX. the most recent date input into the cells S8, T8, U8 will populate in cell R8. There is a default value of 0-Jan-00 that automatically populates in cell R8 as a result of the MAX Function. Any value that is input into cell S8, T8, U8 will show in cell R8 immediately after being input as a result of the MAX Function.
I need cell R8 to remail blank until the last of cells S8 or T8 or U8 has been input (in no specific order). Once the last cell has been filled; it is only at that time I need cell R8 to show that most recent date input into any of cells S8 or T8 or U8. I can't hide the column, I need cell R8 to remain empty until the last of the three cells- S8, T8, U8 has been filled (the last cell filled will not always contain the largest value or most recent date).
I put together some code which at the end of it I am wanting to show in cell D1 the creation date for the most recently created file found.
View 5 Replies View RelatedI want to find the most recent date in column D, when the variables in column E are all the same. There are many different variables in column E, and for each group of the same variables (eg. all cells containing "A"), I want to find which is most recently dated (dates are in column D). This is my code so far...
Sub adddiv()
Dim ticker As Variant
Dim freq As Long
Dim csheet As Worksheet
Set csheet = Worksheets("Sheet2")
[Code] ....
How do we sort an alpha numeric date from recent to oldest.
from this:-
HGH010112
HGH231211
HGH020212
to this:-
HGH231211
HGH010112
HGH020212
My spreadsheet uses alternating columns for actual and budget inputs
I would like to preload the budget for the whole year
But the ytd formula should only show results to match the input of actuals
In otherwords, If I input actuals for period 1, the YTD formulas for actuals and budget should return YTD period 1 only and ignore the remainder of the budget inputs
After period 2 actual inputs, the formulas shlould update to reflect period 2 YTD and so on and so forth
How can I accomplich this?
Sample of layout attached
Totals at Cols AK-AM
I have an excel spread sheet that is quite large it hold events for a piece of software that we are using what I am trying to do is display the last time was successful and the last time something failed
What I Want Return the MAX Value of the cells in a Column labeled start date for the rows where a Column labeled Agent =X and a Column labeled Mission Type = Y
In plain English with an example In another Cell I want to display the most recent start date for a mission of a particular type for an agent
Using the following table as an example I would like to determine the last time Agent 007 was on a Mission of type a
The Expected result should be 6/23/2008
If the same was asked for agent 99 the result would be 4/20/2008
And again for 66 the results would be 5/2/2008
If we then changed the mission type to b the results would be
007 6/23/2010
66 5/2/2010
99 4/25/2010
Here are the formulas i have tried already the results for these were incorrect and exactly the same 6/23/2012 the formula seems to be ignoring the first value and just calculating the last column to the latest date
[Code]....
I have a 2 groups of column headings with a different month and year in each heading so
1st Group of columns range
Columns AJ through AX
Column Heading example "Expense Ratio February 2013......next Column over is "Expense Ratio March 2013"
2nd Group of columns range AY though CE
Column Heading example "Capital Balance February 2013......next Column over is "Capital Balance March 2013"
Each new month I need to add a new Expense Ratio column after the most recent expense ratio Column. (i.e. Find "Expense Ratio March 2013" and I need to add a column after that with heading "Expense Ratio April 2013"
Same thing for Capital Balance - add a new Capital Balance column after the most recent Capital Balance Column. (i.e. Find "Capital Balance March 2013" and I need to add a column after that for "Expense Ratio April 2013"
Because the ranges keep changing month over month, how do i do this.
i have several styles to handle mentioned under different rows separately.
all the styles have their various raw materials inward date mentioned under different column of their respective rows from column Q to Y
now i need to 1. extract the latest date of any particular raw material which can be in any of column from Q to y columns ACCORDING TO DIFFERENT STYLES IN A Particular row automatically that is AC
Extract data with differing date formats that I need to convert to something consistent that I can format as a date.
This is an example of data.... all with general format at the moment.
2/28/2013 2:48:53 PM
1/16/2013 10:48:50 AM
12/17/2012 11:59:49 AM
I have used this formula to extract the date portion, but I can't get this to then format as date. How do I convert this to the julian date, so I can then apply a date format?
=LEFT(G9,SEARCH("/",G9)+7)
(The day portion of this date always has a leading zero).
I have two questions regarding date format and hope you can provide input.
1) say 01/01/2010 displays as Jan-10 and i need a new column to state it as JAN. What function should i use to achieve it?
2) i need to state the difference between first day and last day of the month. What function should i use to achieve it?
Once a week I recieve a data file from another department and their report shows the period starting as well as ending but in text format all in one cell.
How can I extract the two dates to show the srart date in one cell and the end date in another. The example that would arrive in cell A1 is:
Reporting Period: 01/01/2009 00:00 to 07/05/2009 23:59
The hours and minutes do not matter.
Every week we produce a report that has the filename: Master_BER_Pending Revokes Report_YYYY-MM-DD.xlsm
Some of the information from this workbook needs to be pasted into a new tab on a different workbook. The new tabs naming convention is simply "DD MM". Currently I've got a command prop that asks the user to enter it in manually. See below
VB:
Dim newsh As String
newsh = InputBox(Prompt:="Enter new tab name", Title:="Tab Name", Default:="e.g. '05 05'")
Sheets.Add After:=Sheets(Sheets.Count)
Sheets(Sheets.Count).Select
ActiveSheet.Name = newsh
The user gets the information for the month and day from the filename of the report that was produced. What I need is the DD and MM to be extracted from the filename and used to name the new sheet.
In cell A1 i have a drop-down list.
In this list are the following:
London [S] (14/02/2013)
Rome [W] (23/10/2013)
Tokyo [W] (17/01/2014)
Berlin [A] (24/02/2014)
...and so on...
In cell B1 I would like to extract the currently selected city name and the [?] (e.g. "London [S]")
In cell C1 i would like to extract the currently selected date (e.g. (14/02/2013)
I need to extract the date from the following file name format:
C:Documents and SettingsRezDesktopExcel forumQueue Performance Phone Daily15_Dec_2009.csv
i have macro running where this file path gets save as a string and i can paste this string in a cell, is there a way i can use a few extra line of code to extract only the date from this string and paste only the date? or the other way for this would be use formula to convert this to a date.
What I want to do is extract the date only from a string of text in a cell and put it in the cell next to it. The date is not alway in the same position within the text string and although similiar, the text string can differ. There are around 6000 lines in the sheet, I've pasted 4 as an example below.
THE BIG COMPANY LTD 15312178 COLLECTION 14.12.09
The Small Company Ltd 19073864 COLLECTION
DATE 17/05/10 511438 511437 511436 ORD LE
The Medium Size Company 19080948 COLLECTING WEDS 26/05/10
The Very Good Company 19149554 COLL DATE:28.06.2010 175 PEA PARK ROAD Z7 9AB
I want to extract date from string My dates are going to increase every 9 days. as you can see in table given bellow. And goes till Wk52
Wk1-> 02-Jan-11
02-Jan-11
Wk2-> 09-Jan-11
09-Jan-11
Wk3-> 16-Jan-11
16-Jan-11
Wk4-> 23-Jan-11
23-Jan-11
Wk5-> 30-Jan-11
30-Jan-11
Any formula that can extract from a time stamp text string, which looks as follows: 7/8/2013 7:10:33 AM.
The tricky bit is saying anything before the first "/" represents the month, anything between the 1st and 2nd "/" represent the date, and the 4 digits after the second "/" represents the year.
I have some dates with text, I want to extract dates from the text. Here is an example.
Sheet1
AB1ORIGINALI WANT2PREVIOUSLY CAPITALIZED 3Capitalize 09/05 per FMS 9/30/20054Capitalization date 11/05 11/30/20055PREVIOUSLY CAPITALIZED 6Capitalize 12/05 per FMS 12/31/20057Capitalize 08/05 per FMS 8/31/20058PREVIOUSLY CAPITALIZED 9Capitalize 09/05 per FMS 9/30/200510Capitalize 12/05 per FMS 12/31/200511CAPITALIZE 12/2006 12/31/200612PREVIOUSLY CAPITALIZED 13PREVIOUSLY CAPITALIZED 14Capitalize 09/05 per FMS 9/30/200515Capitalize 03/05 per FMS 3/31/200516Capitalize 12/05 per FMS 12/31/200517PREVIOUSLY CAPITALIZED, CAPITALIZE 12/06 12/31/2006
Excel tables to the web >> Excel Jeanie HTML 4
I've had a question which i can't solved cause of poor knowledge. Example of my issue: cel A1 are filled with a lotnumber like 107610618. as 107=year 2007 61=code of product 06=month 18=runnumber. in cel B1 i would like to have a few characters of that lotnumber visible. all that i want to show in cel B1 = month & year example 0607. Then when this is done in cel C1 i would like to convert this characters into june-07.
View 6 Replies View Related
