I'm trying to put a report together that shows the most recent salary increase for each employee. Below is a snap shot of what my pivot looks like - How can I format the report to only show the most current change - Which in this case would be the 2 highlighted rows....
View 1 Replies
I looked around at some date functions and could not find one to work.
I have a sheet that has 365 days. When I load the sheet I want to cell for today to be highlighted in some way..... color or just active.
If date = 05-10-2007 then
BackgroundColor = 17
else
BackgroundColor = 9
end if
I have one spreadsheet with a list of materials by material number. I have another with all sales activity. How can I pull into the first spreadsheet the date of the latest activity from the second spreadsheet?
View 2 Replies View RelatedI have a workbook to keep track of names and dates of a specific action. There are 10-15 names that recur on the list. The most recent action is added to the bottom of the list. The names are in column I and the date of the action is in column J.
The problem is having to scroll through the list to find the most recent action for each person. Ideally i'd like to have a list of the names in column N and then in column O the most recent date in the list for each name.
Looking at a series of rows that contain dates (in one column).
Return the value of the cell in the column next to the most recent date.
I can get the most recent date using MAX, but how do I tell Excel to return the value of the cell next to it?
I have data resembling the following
Col A
Sun
Sun
Sun
Sun
Col B
12/08/2007
13/08/2007
14/08/2007
15/08/2007
Col C
A
B
C
D
Is there a formula where I can extract the entire row for the most recent date, in this case Row 4 containing Sun,15/08/2007,D would be returned.
I want to lookup an ID which there may be three of, but I would want the most recent date out of the three ID. I can get this to work by putting the column in ascending order but this is not very practical.
Is there any way I can do a lookup and add a date parameter to lookup the most recent?
I have a list of numbers column A and a list of dates in column b, i need a formula which looks up the most recent for each of the numbers. can this be done?
View 3 Replies View RelatedHave a sheet with 24K rows. Column A is client name. Column B are check dates. The info is sorted by client then check date. Clients can have one to many check dates, so I client is listed as many times as there are check dates. If ten checks, then ten rows for that client. One check then one row for that client.
I only want to keep the last/most recent check date for each client, deleting all other rows for that client with check dates before the most recent. I believe I need to step through the file comparing column A, row by row, to see if I have a match for the next row in A. If no match I keep that row, because there is only one check, and move down one. If a match, then I delete the current row.
How to code this is my problem. Is it a loop?
I've searched the site, but have not found anything that matches what I want to do. I have a statistical spreadsheet that tracks machine accuracy by date. The spreadsheet has multiple columns per worksheet. The info is entered and sorted by date with oldest date first. I want to set up a seperate worksheet to find the most recent date from several different columns and populate it in a seperate cell. From there I'll do some calculations to identify how long it has been since a particular machine has been accuracy verified. Is there a formula to do this or does it have to be done through a macro?
View 3 Replies View RelatedThe data in my spreadsheet will have a column of dates that will change depending on info input in another cell.
What I need is a formula that will give me the most recent date for lets say 2012
04/01/13
03/01/13
02/01/13
01/01/13
12/27/12
12/25/12
12/12/12
12/02/12
if use the max function I get the 4/1/13 result, what I need is a formula that will return the 12/7/12 number.
I've been trying to create a pv table that will count all the trades based on products, but they are duplicate in my set of data that I am trying to eliminate, I just want to select the trades with most recent date and if there are duplicates entries with the same date, then to select the aging column..
Column A are my trade IDs (duplicates trades), column G my dates and column O my aging days (goes up to >5). What I'd like to do is to count the trade using the most recent date and if the date is the same use the aging column. is this even possible to do using formulas?
I have used the MAX function to populate the most recent date in a series.
-EX. the most recent date input into the cells S8, T8, U8 will populate in cell R8. There is a default value of 0-Jan-00 that automatically populates in cell R8 as a result of the MAX Function. Any value that is input into cell S8, T8, U8 will show in cell R8 immediately after being input as a result of the MAX Function.
I need cell R8 to remail blank until the last of cells S8 or T8 or U8 has been input (in no specific order). Once the last cell has been filled; it is only at that time I need cell R8 to show that most recent date input into any of cells S8 or T8 or U8. I can't hide the column, I need cell R8 to remain empty until the last of the three cells- S8, T8, U8 has been filled (the last cell filled will not always contain the largest value or most recent date).
I put together some code which at the end of it I am wanting to show in cell D1 the creation date for the most recently created file found.
View 5 Replies View RelatedI want to find the most recent date in column D, when the variables in column E are all the same. There are many different variables in column E, and for each group of the same variables (eg. all cells containing "A"), I want to find which is most recently dated (dates are in column D). This is my code so far...
Sub adddiv()
Dim ticker As Variant
Dim freq As Long
Dim csheet As Worksheet
Set csheet = Worksheets("Sheet2")
[Code] ....
How do we sort an alpha numeric date from recent to oldest.
from this:-
HGH010112
HGH231211
HGH020212
to this:-
HGH231211
HGH010112
HGH020212
My spreadsheet uses alternating columns for actual and budget inputs
I would like to preload the budget for the whole year
But the ytd formula should only show results to match the input of actuals
In otherwords, If I input actuals for period 1, the YTD formulas for actuals and budget should return YTD period 1 only and ignore the remainder of the budget inputs
After period 2 actual inputs, the formulas shlould update to reflect period 2 YTD and so on and so forth
How can I accomplich this?
Sample of layout attached
Totals at Cols AK-AM
I have an excel spread sheet that is quite large it hold events for a piece of software that we are using what I am trying to do is display the last time was successful and the last time something failed
What I Want Return the MAX Value of the cells in a Column labeled start date for the rows where a Column labeled Agent =X and a Column labeled Mission Type = Y
In plain English with an example In another Cell I want to display the most recent start date for a mission of a particular type for an agent
Using the following table as an example I would like to determine the last time Agent 007 was on a Mission of type a
The Expected result should be 6/23/2008
If the same was asked for agent 99 the result would be 4/20/2008
And again for 66 the results would be 5/2/2008
If we then changed the mission type to b the results would be
007 6/23/2010
66 5/2/2010
99 4/25/2010
Here are the formulas i have tried already the results for these were incorrect and exactly the same 6/23/2012 the formula seems to be ignoring the first value and just calculating the last column to the latest date
[Code]....
I have a 2 groups of column headings with a different month and year in each heading so
1st Group of columns range
Columns AJ through AX
Column Heading example "Expense Ratio February 2013......next Column over is "Expense Ratio March 2013"
2nd Group of columns range AY though CE
Column Heading example "Capital Balance February 2013......next Column over is "Capital Balance March 2013"
Each new month I need to add a new Expense Ratio column after the most recent expense ratio Column. (i.e. Find "Expense Ratio March 2013" and I need to add a column after that with heading "Expense Ratio April 2013"
Same thing for Capital Balance - add a new Capital Balance column after the most recent Capital Balance Column. (i.e. Find "Capital Balance March 2013" and I need to add a column after that for "Expense Ratio April 2013"
Because the ranges keep changing month over month, how do i do this.
i need VB to select the start date of booking and autohighlights the "blank booking slot cells" until the end date that is input in Excel. You can visualise this as a room booking system. The left most column is the dates and the first row represents the different rooms type. E.g. if one guest books the Twin Deluxe No. 123 room on 23 Oct 2006 until 25 Oct 2006. We wish the VB can essentially help us identify the start date then begins highlighting the three slots for 23, 24 and 25 Oct on the column for the Twin Deluxe Room 123.
View 4 Replies View RelatedExcel 2003 > In a given row, I need to change the fill-color of the cell in column C if the user changes any value in columns D through Z. How to? Need a VBA code snippet.
View 2 Replies View RelatedI have a sheet that I have item numbers in a column that i want to highlight and change color when they are not the same. I want the colors to be unique to each number. I am currently using conditional formatting (Format cells based on their values (3-color scale)). I works alright but not perfect.
condition formatting.PNG
how I can create a formula that would highlight the cell in a colour if the date was past todays date? This is what I'm doing - I have the expiry date of people's insurances. so e.g todays date is 8 th January, so if the insurance had expired 31.12.08, i would want the cell to be highlighted red. I think it may be an IF function but I cant remember.
View 3 Replies View RelatedWe are doing a project on a booking system and wish to use VB codes to autohighlight the slots from the start date until the end date.
View 9 Replies View RelatedWe are currently working on uploading product (XML) to our website, we have some old product data done and now there are some new product sheet came out and we have 30 of them. Between the new and old product sheet, we have to add new products, remove discontinue products and update all the old product's pricing.
First come to first, we need to find out which are the old products and which are the new products. Yes, the manufacture didn't separate the new from the old. I have put together a sample Excel, please see attachment.
I need to compare them and highlight the cells in in GREEN on both columns when they are match.
Column A (Old SKU)
Column B (New SKU)
Column C (New COST)
Column D (New MSRP)
Column E (New SPECIAL PRICE)
Update new pricing from NEW Columns C,D,E to OLD Columns F,G,H when the cells from Column A and B are highlighted
Column F (Old COST)
Column G (Old MSRP)
Column H (Old SPECIAL PRICE)
Can that be done within Excel build in functions?
I have a whole spreadsheet of data which looks confusing so I need to make it look more attractive to the viewer.
I have column A which shows a number of the branch conducting the transaction and the column will contain numerous different branches which I have sorted into branch order.I think there are too many branches to use the conditional formatting condition (probably 5000 different numbers)
What I wish to do is change the colour of the cell when the branch name changes.
For example
Column A= Branch number
123
123
123
345
345
345
456
456
456
789
789
What I need is to highlight all branches 123 with a colour (any colour say red) but when the change in branch number occurs to 345 use a different colour to highlight all the branches (cells) with the number 345 (say grey).Then when the branch changes to 456 use the same colour that highlighted branch 123 (ie red) .Then again when the branch changes to 789 change the colour back to grey again so the spreadsheet shows rows highlighted when a different branch occurs
The above example would look like
Column A
all branches with 123 ( cell highlighted any colour but say red)
branches 345 cells highlighted grey
branches 456 cells highlighted red
branches 789 grey
I am sure that a worksheet change would be the best way to go for this, but I am unsure how to test for this.
I am looking to prevent users from using a select set of colors for highlighting. If the user tries to highlight using one of these invalid colors, I would like to flag a message telling the user that this color is reserved and highlight the selection to the previous color.
The previous color may be a tricky part as I do not know if this can be done.
I have a table of data (total 142 rows). Column contains dates, in the format dd-mmm-yyyy.
I tried to filter using DATE FILTERS->EQUALS and in the custom filter window, I chose EQUALS then picked a date from the date picker icon. The date I picked was 5/4/2009 (this is May 4, 2009, formatted automaticall by excel as m/d/yyyy).
When I clicked OK, nothing showed up despite the fact that there are 6 occurences of May 4, 2009 (formatted as dd-mmm-yyyy in the data table)
So my questions are:
1. Is this due to the formatting?
2. Is there a way to change the date format supplied by the date picker?
As i navigate excel, I was wondering how to change the background or highlight (instead of bold border) the active cell?
View 3 Replies View RelatedUsing Excel 2010. Is it possible to change the default line thickness and fill color when selecting the ActiveSheet Target Row below?
I would like a thin border and a light grey fill - without interfering with any fomatting or conditional formatting that has been applied to the worksheet.
