Looking at a series of rows that contain dates (in one column).
Return the value of the cell in the column next to the most recent date.
I can get the most recent date using MAX, but how do I tell Excel to return the value of the cell next to it?
I have one spreadsheet with a list of materials by material number. I have another with all sales activity. How can I pull into the first spreadsheet the date of the latest activity from the second spreadsheet?
View 2 Replies View RelatedI have a workbook to keep track of names and dates of a specific action. There are 10-15 names that recur on the list. The most recent action is added to the bottom of the list. The names are in column I and the date of the action is in column J.
The problem is having to scroll through the list to find the most recent action for each person. Ideally i'd like to have a list of the names in column N and then in column O the most recent date in the list for each name.
I have data resembling the following
Col A
Sun
Sun
Sun
Sun
Col B
12/08/2007
13/08/2007
14/08/2007
15/08/2007
Col C
A
B
C
D
Is there a formula where I can extract the entire row for the most recent date, in this case Row 4 containing Sun,15/08/2007,D would be returned.
I want to lookup an ID which there may be three of, but I would want the most recent date out of the three ID. I can get this to work by putting the column in ascending order but this is not very practical.
Is there any way I can do a lookup and add a date parameter to lookup the most recent?
I have a list of numbers column A and a list of dates in column b, i need a formula which looks up the most recent for each of the numbers. can this be done?
View 3 Replies View RelatedHave a sheet with 24K rows. Column A is client name. Column B are check dates. The info is sorted by client then check date. Clients can have one to many check dates, so I client is listed as many times as there are check dates. If ten checks, then ten rows for that client. One check then one row for that client.
I only want to keep the last/most recent check date for each client, deleting all other rows for that client with check dates before the most recent. I believe I need to step through the file comparing column A, row by row, to see if I have a match for the next row in A. If no match I keep that row, because there is only one check, and move down one. If a match, then I delete the current row.
How to code this is my problem. Is it a loop?
I'm trying to put a report together that shows the most recent salary increase for each employee. Below is a snap shot of what my pivot looks like - How can I format the report to only show the most current change - Which in this case would be the 2 highlighted rows....
View 1 Replies View RelatedI've searched the site, but have not found anything that matches what I want to do. I have a statistical spreadsheet that tracks machine accuracy by date. The spreadsheet has multiple columns per worksheet. The info is entered and sorted by date with oldest date first. I want to set up a seperate worksheet to find the most recent date from several different columns and populate it in a seperate cell. From there I'll do some calculations to identify how long it has been since a particular machine has been accuracy verified. Is there a formula to do this or does it have to be done through a macro?
View 3 Replies View RelatedThe data in my spreadsheet will have a column of dates that will change depending on info input in another cell.
What I need is a formula that will give me the most recent date for lets say 2012
04/01/13
03/01/13
02/01/13
01/01/13
12/27/12
12/25/12
12/12/12
12/02/12
if use the max function I get the 4/1/13 result, what I need is a formula that will return the 12/7/12 number.
I've been trying to create a pv table that will count all the trades based on products, but they are duplicate in my set of data that I am trying to eliminate, I just want to select the trades with most recent date and if there are duplicates entries with the same date, then to select the aging column..
Column A are my trade IDs (duplicates trades), column G my dates and column O my aging days (goes up to >5). What I'd like to do is to count the trade using the most recent date and if the date is the same use the aging column. is this even possible to do using formulas?
I have used the MAX function to populate the most recent date in a series.
-EX. the most recent date input into the cells S8, T8, U8 will populate in cell R8. There is a default value of 0-Jan-00 that automatically populates in cell R8 as a result of the MAX Function. Any value that is input into cell S8, T8, U8 will show in cell R8 immediately after being input as a result of the MAX Function.
I need cell R8 to remail blank until the last of cells S8 or T8 or U8 has been input (in no specific order). Once the last cell has been filled; it is only at that time I need cell R8 to show that most recent date input into any of cells S8 or T8 or U8. I can't hide the column, I need cell R8 to remain empty until the last of the three cells- S8, T8, U8 has been filled (the last cell filled will not always contain the largest value or most recent date).
I put together some code which at the end of it I am wanting to show in cell D1 the creation date for the most recently created file found.
View 5 Replies View RelatedI want to find the most recent date in column D, when the variables in column E are all the same. There are many different variables in column E, and for each group of the same variables (eg. all cells containing "A"), I want to find which is most recently dated (dates are in column D). This is my code so far...
Sub adddiv()
Dim ticker As Variant
Dim freq As Long
Dim csheet As Worksheet
Set csheet = Worksheets("Sheet2")
[Code] ....
How do we sort an alpha numeric date from recent to oldest.
from this:-
HGH010112
HGH231211
HGH020212
to this:-
HGH231211
HGH010112
HGH020212
My spreadsheet uses alternating columns for actual and budget inputs
I would like to preload the budget for the whole year
But the ytd formula should only show results to match the input of actuals
In otherwords, If I input actuals for period 1, the YTD formulas for actuals and budget should return YTD period 1 only and ignore the remainder of the budget inputs
After period 2 actual inputs, the formulas shlould update to reflect period 2 YTD and so on and so forth
How can I accomplich this?
Sample of layout attached
Totals at Cols AK-AM
I have an excel spread sheet that is quite large it hold events for a piece of software that we are using what I am trying to do is display the last time was successful and the last time something failed
What I Want Return the MAX Value of the cells in a Column labeled start date for the rows where a Column labeled Agent =X and a Column labeled Mission Type = Y
In plain English with an example In another Cell I want to display the most recent start date for a mission of a particular type for an agent
Using the following table as an example I would like to determine the last time Agent 007 was on a Mission of type a
The Expected result should be 6/23/2008
If the same was asked for agent 99 the result would be 4/20/2008
And again for 66 the results would be 5/2/2008
If we then changed the mission type to b the results would be
007 6/23/2010
66 5/2/2010
99 4/25/2010
Here are the formulas i have tried already the results for these were incorrect and exactly the same 6/23/2012 the formula seems to be ignoring the first value and just calculating the last column to the latest date
[Code]....
I have a 2 groups of column headings with a different month and year in each heading so
1st Group of columns range
Columns AJ through AX
Column Heading example "Expense Ratio February 2013......next Column over is "Expense Ratio March 2013"
2nd Group of columns range AY though CE
Column Heading example "Capital Balance February 2013......next Column over is "Capital Balance March 2013"
Each new month I need to add a new Expense Ratio column after the most recent expense ratio Column. (i.e. Find "Expense Ratio March 2013" and I need to add a column after that with heading "Expense Ratio April 2013"
Same thing for Capital Balance - add a new Capital Balance column after the most recent Capital Balance Column. (i.e. Find "Capital Balance March 2013" and I need to add a column after that for "Expense Ratio April 2013"
Because the ranges keep changing month over month, how do i do this.
I need to compare three cells of random dates shown in Column E, F,& G with Row's H5:AK5, H7:AK7, H9:AK7 (the Dates to these rows is Static on row H3:AK3.) EX: ROW 5 has Start Date, End Date (1) and End Date (2). Compare Cell H3 between Start Date & End Date (1). If H3 falls between or equal to Start and End Date(1) then highlight cell H5. Proceed till AK3 (higlighting only the cells H5:AK5). Then compare cell H3 between or equal to End Date (1) and End Date (2) (higlighting only the cells H5:AK5). Then do the same for ROW 7 and ROW 9.
To make things a bit more difficult I need to have " WK#" in Row 14 (these WK# is on another tab called "Task" of the workbook) needs to be displayed in Row's H4:AK4, H6:AK6, & H8:AK8. EX: Compare Date in D15 between or equal to Start Date & End Date (1) then display Wk# in D14 in H4. Continue till all dates in
D15:Z15 are compared to Start Date & End Date (1) and WK#'s in Row D14:Z14 are inputted if applicable in Row H4:AK4, H6:AK6, H8:AK8. I hope this is not confusing. I can't seem to use the upload option so here is alink to download a jpg of the sheet
I want to get a return value of date in column C whereas column A represent a date and column B represent a number. Simplest formula in excel is Column C (Feb 26, 2014)= Column A (Feb 21, 2014) + Column B (5). I want it to have in macro code.
View 14 Replies View RelatedI have 31 cells (say in A1 thru A31), representing days of the
month, that daily number values will be entered. I want to be
able to select the value in the most recent day cell, not the
most recent updated cell...
i.e. the cell in the A1:A31 range closest to the A31 cell.
For example...
Say I have values: 2,4,7,12 in A1 thru A4, I want the value
in A4, even if I just updated Day 2's cell... because A4,
or Day 4, is closer to the end of the month.
I am trying to return a TRUE or FALSE based on a date in a cell.
for example:
if cell A1 = 07/11/2009
I want A2 to show TRUE or FALSE if A1 is 14 days or more behind todays date.
I have tried stuff like:
=IF(A1=TODAY()-14,"True","False")
but it just always says false. EDIT: I have just noticed that if I change the date in A1 to exactly 14 days behind todays, it returns TRUE. So, it does work. Do I need to add a GREATER THAN in there?
Column Q is a vlookup which looks up dates contained in column P within a range called "Query_From_Price_Database" and returns data from column 3 as indicated below:
=VLOOKUP($P4,Query_from_Price_Database,3)
What I'd like to achieve for each time a value is returned as being "0", is for the cell to display the most recent data.
E.g.The vlookup results might be:
27/04/10 15.29
26/04/10 15.55
25/04/10 14.98
24/04/10 0
23/04/10 15.13
22/04/10 0
21/04/10 0
20/04/10 0
19/04/10 15.24
I want it to be displayed thus:
27/04/10 15.29
26/04/10 15.55
25/04/10 14.98
24/04/10 15.13
23/04/10 15.13
22/04/10 15.24
21/04/10 15.24
20/04/10 15.24
19/04/10 15.24
Where there would be zeros, data is displayed from the most recent date actually containing non-zero data. Is this possible with a "not too complicated" formula?
I've tried a few methods, but they only seem to result in "formula too long" errors.
I am familiar with SUMPRODUCT and {SUMIF}, but I am stumped on how to create a formula that can sum (or count) the only the most recent entry for each Name. The Name field is dynamic and constantly updated with a unique reference number, so I don't want totals by Name/Type, but rather only the newest Ref for each Name by Type.
Ref__Name____Type_QTY
8____John____B____5
7____Bob____B____4
6____Dale____A____3
5____Jane____C____2
4____Bob____B____5
3____Jane____C____4
2____John____B____3
1____Bob____A____2
Should return;
Recent_Type____NOT Total
5______A______5
9______B______17
2______C______6
Hopefully this explains it all. Looking forward to any input or suggestions to keep this a simple automated process.
*added _ to space out the columns
I attached an example.
I am trying to figure out how I can write formulas that look for trends in the data. I will be entering more data every day. I need to look at the 5, 10, 20 most recent results for each number.
For example, I need to see how many times yes was answered for #3 in the most recent 5,10, 20 entries.
I am sure there is some simple way to do this with a control + f formula, but I don't know how to do it.
Is there a way to list the recent changes to an excel document on the document itself?
For example, I have just 4 or 5 columns in the sheet, but out the the right on the 7th column I'll have a header that says "Recent Changes". Below that for X amount of rows, I would like it to keep a running change list something like this:
B14 was changed from '6.021' to '6.5' by username on 10/21/07 3:45 pm
A23 was changed from 'Sally' to 'Billy' by username on 10/21/07 2:30 pm
I thought this up by looking at the way the "Track Changes" functionality works on the Tools menu. That will highlight the cells in blue as they are changed and will also let someone look back through changes to let them accept or deny.
I have a table in a sheet where the rows of data are filled in automatically from other sheets. Each row represents a different week. The data, (lifted from from the relevant worksheet for each row) represents the no. of calls in each week.
Now, I've set up an average to be calculated from the data - it'll do this for every row as long as there is data present. (If the row's corresponding worksheet doesn't have any data the result will be "NA()" - not included in the calculation.)
However, I don't want the average to include the no. in the "most recent" row, as this is "live" data and until the week is over does not represent the data for a full week and therefore skews the average.
So I want the average to exclude the data in the most recent row with a numerical value in it and not a "NA()"
ie - column could be ......
I have data, which has an oil well that has had sections of its pipe perforated.
This has all happened on different days throughout the wells life.
I need an equation that says TRUE if the Perforation is the Most Recent for that well.
But I also need it to say True at different Top and Bottom Depth intervals throughout a specific well.
(for example: the last row in this data. Says TRUE even though there are more recent dates in this well.
This needs to say true because this is the most recent perforation in the top and bottom depth interval 9526 to 9536.
The other most recent perforations happened in shallower intervals, ie. 9456 to 9480.
So I need something in the equation that will say true to the most recent start date, if that top and bottom depth interval has not already been selected as true.
I need to have a column that says True IF the start date is the newest (most recent) for each individual well.
Easy enough.. But. I also need this to say True multiple times at different dates for each well.
For example below. it says true on 7/22/2001 three times and then True again on the last row on 10/14/1992.
It has to say true there because this is the most recent perforation that Top_Depth and Bottom_Depth interval.
WELLNAME
TOP_DEPTH
BOTTOM_DEPTH
START DATE
IF most recent Perf
RA-0001
9380
9395
10/14/1992
FALSE
[Code] ......
I would like to sum a range of data based on the most recent 12 months.
Details:
Row E9:?9 - Contains random dates
(where "?" will change based on the user will be min 12 and max undefined)
Column C - Where I want the sum formula - to sum that corresponding rows data based on the most recent dates listed in row 9.
I'm tying to finds the most recent X or O. Then takes the price on that day and compares it to the current price and based on the difference either higher or lower puts out an X if the current price is higher and an O if the current price is lower by the Half StartData - however when i get to about 6 IF statement it freeze up and it wont give me the X or O's ...
View 9 Replies View Related