I am trying to extract a partial string from a cell. There are 2 lines in each cell seperated by ALT + Enter
Example:
GREAT SOUTHERN ROAD
GUNDAROO QLD 7012
What I want to do is extract only the first line of the text and put it into the next column.
I've tried using the FIND, SUBSTITUTE formula, but because the 1st line of the address varies in length, it seems to cause more problems than it solves.
Need formula to extract the text from a cell, with which a vlookup will be preformed on? For example if a cell contains: 116PH(604052) I would need to perform a vlookup on the PH.
The problem is that the "PH" in this case can vary where it's at in the string of numbers. Also, some cells may only have a three digit number with the two letters following. See my attached spreadsheet as an example. The current formula I have in column A on the attached spreadsheet performs the vlookup fine if there is only the three digit number followed by the two letters, but as I've outlined above, this isn't sufficient.
I currently have an issue with sorting data that i download into excel.
I have a list of rows that have text that look something like the below:
redeem: 141BA9835E Colour: Silver
I want to copy only the colour at the end of each of the colours into a new cell. So in theory the formula will pick only the colour out. Below is a list of more rows as an example where it changes slightly:
redeem: C3CC237E3C Colour: Silver
redeem: db56b2177c Colour: Pink
redeem: 7d3fe7eba2 Colour: Black
redeem: EBE56BDA7A Colour: Silver
To summarise have can i extract into the cell next door, only the colours from text
Currently i am having to manually type only the colour into a cell, and it is taking forever when you have 1000's or rows
I have a column of cells with similar to the following text.
First Marine Avenue 18 1303 11 1
There will always be a final 4 groups of text numbers, each with a space
between, but each having different number of numbers (this particular
sequence has 2,4,2,1 - but others may be different, but always 4 groups)
The true text ( a series of Road names are potentiaaly all different, having
a sequence of words that may be up to 5 words long before the numbers start)
I need to extract the 4 groups of numbers into seperate cells, leaving the
Road name text in a singe cell. I would then have a table of 5 columns, the
first the Road text, and the next 4 columns being the group of numbers, which
I would then format as numbers.
I have made something similar before and we were able to make it work... I tried the same code, but it is not working now. Basically in cell a1 I have
Auction Type: Auction, Auction End Time: 11/15/2006 10:00:00 AM(MST), Asking Price/Current Bid: $10.00, Number of Bids: 0, Description: , Traffic: 28
and in cell b1 I need it to only display $10.00 in cell c1 I need 0 (for number of bids)
I have inherited multiple spreadsheets with thousands of hyperlinks in a single column, from all of which I need to extract the hyperlink text to audit it and edit it. The hyperlinks are only displaying less than useful words such as "Go To" "View" or "Click Here", for example.
Manually, I can right-click on the cell, select Edit Hyperlink, press Ctrl+End to select the entire link, press Ctrl+C to copy it, click on OK to close the editing dialogue, then paste it in the destination cell. That's easy, and good if you only have a few to do, but very tiresome if you have more than a dozen. Life's too short to do all those I need to do manually with a 29 day deadline!
I tried setting up a Macro to do it for me, but couldn't get it to work down a column and paste the result in the destination cell on the same row as each successive cell was located. I do very little Macro work, and I find Excel to be less than intuitive in this respect, so I gave up. (At least in Word you can see the whole step-by-step process in the Macro Editing window and easily fix it, if need be...).
One previous discussion, dating from 2006, supplied two answers. See [URL]
Should I set up a Macro and insert the above Function into it? Or is there a completely different way to do it? how to do this in Excel 2003/WinXP is very welcome.
I have a long list of client names in individual cells eg: A2 = Garden Homes Summary, A3 = Lakeland AG Summary etc etc. However I need to extract the client name without the word summary in it.
I know how to do this on an individual basis, but as there is a long list and different number of letters in each one.
I have a spreadsheet where the data held in column A is an export from another system and the exported data looks like this:
??????? Stn ??????? ??????? ??
What i would like to be able to do is to split out the data in column A so that the text before the 'Stn' (but including Stn) are shown in column C with text after 'Stn' is shown in column D. i have looked at using =LEFT, =MID or =RIGHT with =FIND but the problem i have is that the text prior to the letters Stn could be one, two, three or four words and the text after could be similar.
I am trying to transfer data from some appointment based software into a spreadsheet .
the data comes out as one row For example ,the following is the contents of cell A1: 06/06/2014 09:00 AM - 09:30 AM Patient: John Smith
What I would like to do is extract one column with the date ,one column with the patient forename and one with the patient surname.
I have tried various combinations of =RIGHT(A1,LEN(A1)-FIND(".",A1)) etc etc but cannot extract the data I need
I am trying to plot data that I have read out of a PLC (via csv file) . The date/time data shows up as follows: 2007-05-14T02:15:00.020-07:00
In this example, the suffix .020-07:00 is extra information and causes problems with graphing the info. Also, the cell is a not a number value, and I can not force it to be a general, number format.
I would like to truncate the cell or extract the time out of it such that I can plot the PLC data in a meaningful "parameter vs time" graph.
In one column (Column A) I have a column of data which contains long descriptive text - i want to extract a specific piece of text from this descriptive text and enter it into the next Column (Column B).
E.g. Cell A1 = "Hello Buddy, how are you?" - i want to extract the word Buddy and enter it into cell B1
then A2 into B2, A3 into B3, etc, etc,...
Is there a simple macro out there that can do this?
I'm pulling phone numbers out of text strings. There is text string ("Office:") indicating that the number following is an office number (the number that I need). MID and FIND take care of this. There are sometimes two instances of office numbers in single text string, so adding a second column using the third argument of FIND lets me start another search past the first instance of an office number. We have a bunch of office numbers with the qualifier "(Text)" after the original "Office" but before the phone number. How do I catch these ones?
View 8 Replies View RelatedWhat I have is a column of data(text) which contains amongst all the text three strings of text in ever cell in the column which I require copying into three adjoining cells
The data I require is :-
(a) The persons name which is always after the word ‘Requester’ e.g. Requester Steve Robinson
(b) Their office location which is directly after the persons name and is in brackets e.g. (Newcastle User)
(c) The Approving persons name which is preceded by ‘Approved by’ e.g. Approved by Christine Hunting
See examples 1 & 2 below
Example 1
CR0/CRZ3651 Requestor Steve Robinson (Newcastle User) Tel: 01234 798157 Approved by Christine Hunting
Please install and configure 2 Ultra 2s (typhoon and lancaster) for use as ARTE workstations. These workstations require Solaris 2.5.1 plus the same patches as before
Example 2
CR0/CRZ3118 Requestor Doug Cunningham (Newport User) Tel: 0114 9881480 Approved by John Smithers
Please provide support to set up Cisco 2691 Router and PIX-506E Firewall to enable external connection of a remote terminal for project work.
As you will appreciate the text in the cells is of non standard lenght and the three pieces of information can be located virtually any where in the text
Date: 17/09/2013 KO: 19:45 Ref: B Malone Att: 7,574 extraction of text from the above text string which is say in A1. What l need is for Date to go in A2, KO in B2, Ref in C2, & Att in D2. I'm using Excel 2003
View 7 Replies View RelatedI have a meeting name in column A that also includes a meeting #. The meeting number is always enclosed in parentheses and is at the end of the meeting name. There could also be information enclosed in parenthesis in name. I want to extract just the meeting # from the name. Also, the length of the meeting number could change. Here is an example of a 3 meeting names:
Example 1: March Madness (FY2008) Boston (8765) I would want just 8765 to be extracted
Example 2: Year End Planning Audit (11567) I would want just 11567 to be extracted
How can I extract just that the meeting number from these meeting names.
How do I open a text file, read all the lines from said text file & extract a value in the form of a string. For ex., if I know that a certain line in the file might contain this text: Market Value=1234, then I would like to extract the value 1234 (the text Market Value is a constant) from that line & dumps it into a cell in the Excel file.
View 3 Replies View RelatedI have a column of names, I need to extract the last word
Simon Greaves
Martin John Mackay
Miss E Hoddle
Bob W Blanchflower
Sarah White
D Gascoigne
H G Gomes
Should read:
Greaves
Mackay
Hoddle
Blanchflower
White
Gascoigne
Gomes
I need to separate text information from a cell into 3 columns (W,9-8). The first letter I know how to extract. The problem is to extract the number in the middle (1 or 2 digit) between "," and "-" and also the last number. For the last number I could use right() function but the problem is that number could be 1 or 2 digits so I can not specify in advance so formula would have to extract the last number till "-". Anyone knows how to do this?
View 6 Replies View RelatedI need a formula that will extract #s, some of which appear as a range, from many cells. The #s/range of #s will not be in the same text location for every cell & “text to columns” converts some of the ranges to date format which is bad. Below is an example of some of the data that may appear. The only constant is that the first name is only the initial w/a period, but there may be a Jr. or Sr. thrown in occasionally.
T. Jones 1
M. Chavez 2-25
B. Bailey Jr. 26-125
I have a series of cells, each having multiple lines of text within separated by hard return breaks. For example, cell A1 has the following text:
John Smith
123 Main St.
New York, NY
I want to extract line 1 into cell B1, line 2 into cell C1, and line 3 into cell D1.
Is this possible without VBA or Macros? I'm using Excel 2008 for Mac OSX so that's not an option.
I need help extracting numbers from text. In column A, I have a list containing entries like this:
0005 Nurseries — propagation and cultivation of nursery stock
0016 Orchards — citrus and deciduous fruits
0034(1) Poultry Raising
0034(2) Sheep Raising and Hog Farms
0035 Florists — cultivating or gardening
The list goes on for about 800 rows.
In column J, I have this forumula:
{=LEFT(A1,MATCH(2,1/ISNUMBER(MID(A1,ROW(A2:A100)-ROW(A1),1)*1)))}
It works great, except the result includes the left parenthesis: for example, J3 = "0034(1". Is there a way to obtain just the numeric value ("00341")?
Also, is there another formula I can use in column K that will do the opposite and extract only the text? For example: K1 = "Nurseries — propagation and cultivation of nursery stock" and K3 = "Poultry Raising".
I'm usuing the below formula to extract numbers from within text and also dropping off any leading zeros.
Formula in B2 copied down.
Is there any other/better way? ...
the text entered in B2, to split it, so each letter/figure gets his own cell.
like showen in example below.
using excel 2003 + 2007
and if possible no macro's
ABCDEFGHIJKLMNOPQ1datecont.seal
2
ABCD123456-7
ABCD123456-73
I need to extract the text from a string that is always less the last three digits. For example if A1 is abcdefg I always have to take off "efg" and extract the rest of it to the left but the length of the string can vary. I can be dirty and record a macro where I find the length, subtract 3 and then using the LEFT worksheet function can get my result, but when I come to try to convert that to VBA. What is the VBA equivalent of LEFT worksheet function and how would I go about using LEN in conjuntion with subtracting 3 from it?
View 2 Replies View RelatedIf I have a cell that contains a sentence and part of a date, for example "delivery due 01/09", I would like a formula that reads that cell, identifies the 01/09 bit and returns 01/09/2014.
The only trouble is that the date would always be variable, so it's more a case of "delivery due #/#"... if that's even possible.
I have a text file with a long list of data that simply needs to be extracted under separate columns in excel. Below is one sample out of a long list. Here is sample data and the format of the text ...
-----------------------------------------------------------
ABC MORTGAGE LLC
232 23RD ST STE A
BAKERSFIELD, CA 93301
KERN County
Title II
Approval Date: Dec 08, 2007 [11 Areas Approved for Business]
HECM: No Originates 203K: No
Telephone: (343) 633-1234 FAX Number: (343) 632-1330
E-Mail Address: chadlow3@aol.com
------------------------------------------------------------
In excel I need to have these columns, Company Name, Address, Phone, Fax, and Email. I need to pull the data out of the text file automatically and insert it into these columns. The other information in the sample such as approval date is not needed. How do I do this?
This how it looks like, i used this code (see below) to get the amount if there is a word "ins" (martin's code)
IF(AND(ISNUMBER(SEARCH("ins",B47)),NOT(ISNUMBER(SEARCH("insp",B47)))),LOOKUP(99^99,--("0"&MID(B47,MIN(SEARCH({0,1,2,3,4,5,6,7,8,9},B47&"0123456789")),ROW($1:$10010))))+0,""))
it works pretty great, but when things getting better, i've encounter this data: 12,300 ins 09-10 flood
so what i did, is to put another if function, like this: ..
I have a few hundred rows of text in the fomat below: 1.23456 xxxxxxxxxxxxxxxxxxxx. The “x’s” represent text which is unique to each row. what the formula I need to extract the number (1.23456) at the start of the string? To complicate things the number may be reported to any number of decimal places, so the formula needs to be able to extract the first block of digits at the start of each row and report it as a number that can be used in calculations.
View 2 Replies View RelatedI have a column of data in the following format:
261D 31/12/2008
There is also a single space after the end of the date.
Can someone please show me a formula to extract the date from each cell in the column? This is slightly complicated by the fact that the number of days (“D”) could consist of 1, 2, 3 or 4 characters, and the date could also be of variable length (e.g. 1/1/2008 vs 31/05/2008)
I have random text strings which I need to extract the last part from in Excel.
The text string will be made up of code, but the word I need is always to the right of a prefix />
So for instance in A1 I have 76ruihfo:;.>6">/apple
I would want to extract "apple" from the string above into B1.