Extraction Of Data From Sheets Based Upon Input Value
Jan 20, 2010
Example attachment is included. The goal of this is to extract data off of another sheet based upon an input value. It's easy enough to where the input value will be equivalent to the sheet name I want to reference. The example I provide incorporates code that works successfully. The only problems I have are:
1. The select method only works on the active sheet. I want to be able to call this while another sheet is active.
2. My code is very inefficient and takes a while to execute. I'd like to cut down on the execution time.
I have daily production sheets (Excel sheets) that I fill out every day indicating the day's production totals. The files are named by the day's date. For example today's sheet (4/24/13) would be 042413.xls. However, I would like to be able to pull certain pieces of information into another separate spreadsheet. For example, my boss asked me how many of a certain product we made over the last month. So, I'd like to pull the product info, the date made, and quantity made into another sheet. And I'd like to be able to do this automatically for a date range that I specify.
I have directory with multiple workbooks. Each workbook contains multiple sheets (sheet 1, sheet 2, etc). On each sheet of the workbook, there are various data. The data I am looking to extract from these sheets are in the same cell of each sheet. (See data sheet –datasheet.xls). If I can extract these data without opening the file, it would be preferred. Otherwise, opening the workbook, extract the data, and then close the workbook is acceptable.
Desired Solution:
I would like the assistance to create a macro that will extract data from each sheet of the workbook in the directory at a time until all the workbooks and sheets within the directory are read. The macro shall extract data from cell B5, B6, B10:B20, and sheet name from each sheet of the workbook and copy these data to an active sheet called “US” on workbook, DesireResult.xls. The DesireResult.xls shows how the data should be copied over. Before copying the data to the DesireResult.xls workbook, the macro will prompt the user to enter a cell on the “US” sheet as the starting point to paste the information to. Prompting the user to enter the beginning cell shall happen only once and not for each workbook or sheet being read. The reason for this is because the “US” sheet will already have other data in it. After reading each sheet, the macro shall leave a blank row at the end. The data from the next sheet shall be pasted below the blank row. Note: all the workbooks contain macro and link to other file. When opening each workbook, the macro should automatically choose not to update the links.
I have a situation where i would like to hide and delete a few sheets in my worksheet.
there is a few sheets where i want it to be constantly visible and one sheet is based on a cell reference.
the remaining irrelevant sheets i would like it to be hidden and deleted.
'always visible are sheets that are constantly visible in all files' 'visible msds is the sheet where my product data is being pulled out based on a input i enter on my first sheet' the sheets i want to hide and delete will be the remaining irrelevant "MSDS" that i would like to remove through macro.
I am building a shared workbook that will have the same data on multiple worksheets.
The problem is that users are going to be entering updates to that data on individual sheets, not going thru and updating each sheet.
Also, some of the updates will be themselves updated as the day goes on.
What I need is for the workbook to only use the most recent data/update on all of the sheets.
Example: Sheet1 will have all of the info sorted by time. Sheet2 would have only the data for account "A" sorted by job number. Sheet3 would have account "B"...
When a change is made to any of these sheets I want the other sheets to be updated.
Now that I have wrote this out it seems to me that a "worksheet event" macro might do this for me...
But can you write an event macro into all the sheets that would not result in a loop (event macro on sheet1 changes sheet2 which triggers the sheet2 event macro...)?
I am trying to set up a new workbook for my home accounting, this will consist of a seperate sheet for each item which will store the monthly payment data and a master data input sheet, where i intend to select the month and year from a drop down list, then input the amount in each entry for that month. hopefully i will then be able to hit enter and all data will be sent to its corresponding position in its relevent sheet.
I have 3 forms(3 sheets) with the same layout (fields) for data collection. I want to transfer the data from the 3 forms to a consolidated database worksheet. Every form needs to have its own rows of data. For example, if there are three forms for three divisions laid out as below:
BegBal Additions Subtractions Adjustments End Bal xxxx xxxx xxxx xxxx xxxx
The resulting database worksheet should look as follows:
Division Beg Bal Additions Subtractions Adjustments End Bal
A xxxx xxxx xxxx xxxx xxxx B xxxx xxxx xxxx xxxx xxxx C xxxx xxxx xxxx xxxx xxxx
Sub MoveRecord() Dim WSF1 As Worksheet ' Form 1 worksheet Dim WSF2 As Worksheet ' Form 2 worksheet Dim WSF3 As Worksheet ' Form 3 worksheet
I have an excel file with a large list of data in the following format, all the data is in the A column –
Mar 11: category one – process number one (1) Mar 11: category two – process number two (2) Mar 11: category three – process number three (3) Mar 11: category four – process number four (4) Mar 11: category five – process number five (5)
I would like to extract from the list, ONLY the data highlighted in red i.e. the process number data –
Mar 11: category one – process number one (1) Mar 11: category two – process number two (2) Mar 11: category three – process number three (3) Mar 11: category four – process number four (4) Mar 11: category five – process number five (5)
I just wanted to ask whether the same code will work for many more sheets or will modification be needed? I have a very basic understanding of vba loops, so plz tell me did you check the entire row for being blank or specific cells? Im attaching a file which more closely resembles the data i work with, just tell me whether the previous macro called "ravi" will work fine or will it require modification.
There are websites available for data, but what is viable and crucial to me is finding a way to
1) Run a repeated process via a macro / vba script to allow for data input into the site 2) Once input into site, data is to be brought back into excel so that I can benchmark my product pricing vs my competition
There are 2 sites I am most interested in getting this information from specifically and although they do the same thing they have a couple of unique pros to them. they are the following
1) Findchips.com 2) eciaauthorized.com
The biggest pro to findchips.com is that they have a beta tool on their site that allows for "mass searches" to be performed as opposed to 1 part number at a time. Up to 100 results can be returned at a time, so although there would be multiple iterations doing it this way would save processing power as each step is not done line by line (p/n by p/n) as i could group them and send them and perform the operations that way.
This table has one column with people's names, other columns with different things, and one with hours.
The figures will change every month, and my dad doesn't know crap about excel, so anything that he has to go put in equations or sort again every month or whatever, is not going to work. it needs to be so that all he has to do is plug in numbers.
It can be either one or two ways: either I need to pull out all the rows that have hours above a certain amount, and have them sitting to the side/under/above the main table in the same worksheet.
I realize that that may involve a long complicated formula, however.
Alternatively, we can have it so that all the rows with hours above a certain number are color coded at located at the top of the main table. I figured that one out with ease, HOWEVER I don't how to make that automatic, so that it does it by itself when the numbers are plugged in each month. My dad would not be able to handle sorting.
I need the hours that =0 color coded and put at the bottom if possible, it's not absolutely necessary, however. I could not figure out how to put the highest hours on top and the hours equaling 0 at the bottom, considering that all rowsthat fall in between need to be kept in alphabetical order.
Creating a working userform that takes data input from the user and puts it onto a spread sheet.
That data is then used to calculate a result (via the spreadsheet), and I want that result to show on the userform when the data is submitted (if that makes sense?)
I want to pull data from another sheet, however there are multiple listings of each and I want to pull the data to another sheet for each line. I maybe easier if I try and show below:
Col. ACol. BCol. C Smith101 Jones512 Green65 Black1214 Smith 3612 Jones1512 Dual25 Green1225
I want to pull this data for each name in Col. A in to another sheet. I've tried "IF", "Vlookup" and a couple of others, it just seems to be hitting the first option and pulling the data but not the ones below.
So if I selected Green on the second tab it brings through the "6" and "5", but not informtion from the listing from Green below. So I wiould like to list all the Green's, and the applicable data.
To start off macro should pick selected columns such as owners and their projects, start date, price Final price, priority and status columns and paste into new sheet
At the same time only pick selected owners(Dave, Brian, Ken, Russell, Ben)data along with their high low, and medium projects then format the price and the final price column (that is to first convert them to numbers, then change it to the currency format and set the decimal place to 0) and then sort owners (AtoZ) along with Price and final price columns (largest to smallest) into a new workbook and to a new sheet in the same workbook with a name to the sheet called Extracted data
note owners may change and new members might get included in the list ( I am not sure if something dynamically can be done about this in the macro)
I have included sample data and how the output should look like.
I am trying to move (archive) data from one sheet to another sheet based on a date range provided by the user’s input. If the date on sheet “list” in the cells in range R9:R10000 fall within that date range the following takes place. The rows that meet the date range per the user’s input in the range of R9:R1000 are copied and just the values are pasted into the next empty row starting with row 7 on the “report” worksheet. The cells that are copied on the “List” worksheet are NOT deleted but the contents are cleared. The reason for this is because there are formulas/links in those cells.
I have attached a worksheet example and have some VBA code but it does not work.
I have several large excel spreadsheets with thousands of entries (autocad drawing numbers). In one column it lists the date the drawing was created. Unfortunatley most of the entries were input as text. Even though I have formated the column to a date format (01/01/2009) most entries are not converting. Below is an example of some of the cells:
Creating a drop down menu that allows me to pull data from sheet2.
I have all of my data on sheet2 and my objective is to have a small portion of the data displayed on sheet1 once the user selects the specific "study" from a drop down menu.
how to create a drop down menu that will have a list of all the different studies, and then once the specific study is selected, how do I make it display the pertaining information in the master sheet.
Follow up....more information
The data I’m working with is a master list of different drug studies. All of the data is broken down by the specific study itself, so all I need to do is figure out a way to let the user access the data in a quick and easy way. I figured this could be down with a drop down menu that has a list of each study, and the user could select the study they want to review. Once selected, the data pertaining to the study would then populate the fields on the master silde(sheet1).
I created a macro for data segregation and extraction.
My currently flow is:create new worksheets rename the worksheets to e.g., sheet1 to product1, sheet2 to product2, etc manually filter the main data sheet, copy and paste the data into the respective sheets.
How to i edit the codes to allow the renaming of the worksheets to be non-static?
Meaning it doesn't have to be sheet1 to product1, sheet2 to product2
I can have sheet3 to product1, sheet4 to product2 or sheet7 to product1, sheet8 to product2
I feel that my method of data segregation and extraction is kind of rigid. is there any methods i can make it to be more fluid/dynamic?
I've attached a spreadsheet that I'm working on. I want to be able to extract data from a master sheet and copy data to another sheet if the date is within a defined date-range. I've prototyped the problem within the attachment.
Given the code in macro2, none of the records are selected (the "yep"). What am I doing wrong?
I have a form with a number of fields. There is a field at the top of the form for Part number. When I type in a part number I need the form to auto complete any fields that are linked (if i can link them). E.g., if the part number is 111 then based on info in another table the fields will be auto completed for me.
I have a spreadsheet where the start date is manually entered in Cell B1 and an end date is calculated in Cell B3. I would like to have the dates between the start and end date, with a step value of 7 days show in the rows under Cell B3. How do I get this to work?
Excel 2003, I have a list of products with corresponding prices located on a hidden worksheet. I have a spot on another worksheet where users can select a certain product and next to that cell there is a column for price. What I want excel to do is auto-populate the price cell based on what product the user selects. For instance, if the user selects OD2000N, then I want the price to auto-populate with the corresponding price that is found on the hidden sheet. Like I said before, I know this has probably been answered, maybe even mulitple times but I can't seem to find the appropriate thread.
