Creating a working userform that takes data input from the user and puts it onto a spread sheet.
That data is then used to calculate a result (via the spreadsheet), and I want that result to show on the userform when the data is submitted (if that makes sense?)
is it possible to enter data on a spredsheet while a form is opened or must the from be closed first. I thought I was smart to have a form remain open so users could change parameters but at the same time allow them to enter data in uprotected cells.
View 2 Replies View Relatedhow to input a data/number into excel through vba userform and get another data/number from excel back to the userform??
View 8 Replies View RelatedI Want To Use User Form to add data with multiple condition........
1st condition : select name, AHSAAN G, ALI G, SHAHID G.......
2nd condition : select , ONFLOOR BC, ON FLOOR VC, ON LINE VC
3rd condiotn : select, PT P2 P3 PB HR LK
In this use form the i used define name "name_1"
1 = I Added this to combobox 1. if if a aded a new name who is not in the list "name_1" then he asked for added this name or name. if i click yes then added the name in "name_1" list.
2 = When i added the data to my sheet by default all field of UserForm don't blank....
So I have a workbook (Workbook1) that opens a userform on launch. I have another workbook (Workbook2) that has a button to open Workbook1. Upon opening Workbook1 (and as a result the userform) I'd like to input data from Workbook2 into the fields of the userform. I'm not exactly sure how to reference the userform fields to input data from Workbook2.
I'm trying the following code:
Workbooks.Open (Workbook1)
With Workbooks(Workbook1).Userform1
UserformField1 = "Billy"
UserformField2 = "John"
End With
The macro is opening Workbook1 and the userform but the fields return blank.
I have been able to make a excel sheet which takes inputs from userform for First Name, Last Name, Address etc. I have included a duplicate check for column "B" for "First Name". This checks if any existing data is already which matches the new data input for "First Name" through userform.
The userform only checks for the "First Name" check as required and gives a message that duplicate has been found. Then I have to close the userform and do a Control Key+F ( to find the new name for example, James) in excel sheet and validate that new name is same or different from existing name "James". This I want to do since this new name "James" may be another "James" as his "Last Name" is different. So even though First Name is same, since Last Name is different I know they are two different persons. In that case I will add the entry manually in sheet, instead of userform, since I would not be able to input the new data for "James" since the duplicate check with the current code will not allow me to do so.
What I am current trying is -
1. If the new name say "James" is entered through userform, then excel should point me to the existing row where the record for existing name "James" is there, say row 4.
2. Now without closing userform I should be able to see in the background excel sheet the search results for "James", as excel is pointing to that now. There may be multiple "James" in the existing which should be pointed out.
3. Based on the results that I see in the background excel sheet I can now decide that, this new name "James" is different from old "James" (of row 4) since his Last Name is different. Accordingly excel code should then ask me to add this record or discard this new record.
4. Duplicate check for First Name is enough for me. I would not require "Last Name" duplicate check.
I hope I have been able to explain my problem. I have also attached my current code as I am not able to attach any sample test file.
Code:
Private Sub cmdCancel_Click()
Unload Me
End Sub
[Code]....
I have a spreadsheet that is updated weekly -- but every week new info is added that needs a user to input corresponding info. I use a vlookup function to link to another spreadsheet that populates the info from previous weeks and the info that is missing shows up as #N/A...
First I was using a msgbox function to get the info:
HTML Code:
For Each b In myrange
If Application.IsNA(b.Value) Then
Employee = b.Offset(0, -2).Value
SSID = InputBox("Please enter ID# for " & Employee & " :", "New Employee Found")
b.Value = SSID
End If
Next b
But it can be up to 30 different new employees... and that is time consuming.
I would like to make it more user friendly by creating ONE userform that displays all of the employees as labels -- has a text box in which to put the ID # -- and then has a drop down box to choose the type of employee (2 options). I want all of that info to go back to the reference spreadsheet so it will be saved for following weeks, and then redo the vlookup to get the info into the new weekly spreadsheet (I can do that part)....
HTML Code:
Private Sub CloseButton_Click()
Unload UserForm1
End Sub
Private Sub ComboBox1_Change()
[Code] ......
Example attachment is included. The goal of this is to extract data off of another sheet based upon an input value. It's easy enough to where the input value will be equivalent to the sheet name I want to reference. The example I provide incorporates code that works successfully. The only problems I have are:
1. The select method only works on the active sheet. I want to be able to call this while another sheet is active.
2. My code is very inefficient and takes a while to execute. I'd like to cut down on the execution time.
I am trying to move (archive) data from one sheet to another sheet based on a date range provided by the users input. If the date on sheet list in the cells in range R9:R10000 fall within that date range the following takes place. The rows that meet the date range per the users input in the range of R9:R1000 are copied and just the values are pasted into the next empty row starting with row 7 on the report worksheet. The cells that are copied on the List worksheet are NOT deleted but the contents are cleared. The reason for this is because there are formulas/links in those cells.
I have attached a worksheet example and have some VBA code but it does not work.
I have a form with a number of fields. There is a field at the top of the form for Part number. When I type in a part number I need the form to auto complete any fields that are linked (if i can link them). E.g., if the part number is 111 then based on info in another table the fields will be auto completed for me.
View 2 Replies View RelatedI have a table of data which I would like to filter based on a manual cell input instead of the autofilter option.
The table has tickers in column B and has information from column B to U. I would like to filter the data based on a manual ticker that I enter.
I have a spreadsheet where the start date is manually entered in Cell B1 and an end date is calculated in Cell B3. I would like to have the dates between the start and end date, with a step value of 7 days show in the rows under Cell B3. How do I get this to work?
View 3 Replies View RelatedExcel 2003, I have a list of products with corresponding prices located on a hidden worksheet. I have a spot on another worksheet where users can select a certain product and next to that cell there is a column for price. What I want excel to do is auto-populate the price cell based on what product the user selects. For instance, if the user selects OD2000N, then I want the price to auto-populate with the corresponding price that is found on the hidden sheet. Like I said before, I know this has probably been answered, maybe even mulitple times but I can't seem to find the appropriate thread.
View 9 Replies View Related I need to copy and paste the specific dates from the specific city that the user will insert in the "dash" sheet.
Basically, I need the macro to read the city and range of dates that the user will type into the "dash" sheet and copy the columns "AA" to "AD" from rows specified by the dates input. Once it has been copied, it has to be special pasted just the value onto the sheet "1" beginning at location B2.
the the data will not be available as it is vlookups to another excel sheet that i have not provided. I have deleted the data, but you can pretty much put 1's everywhere.
In my table I want to create a user form where the individual would enter a number which would correspond for the Header Row.
and
The user would also enter a Number that would correspond for the first main column (Column B).
Based on the numbers entered, I want to find the next highest number.
For example if 61 is entered 66 would be chosen.
-Same would be for the numbers entered to find the column.
Based on the numbers entered I would like to find the intersecting cell.
Basic code I can embed in a user form?
I have lot of data in three columns like this. The first column is "Name", the second is "Comment" wherein I want the macro to write some comment, the third one is DOB. The problem is that the names in column 1 repeats many times. I want a macro to write in column B "either Old or Older or Oldest" based on the Name and DOB. Thus David with DOB 13 Sep 1982 be marked Oldest in Column B and David with DOB 25 Aug 1988 be marked Older and David with DOB 24 May 1990 be marked Old. Similarly William and Rita should be marked either old or older or oldest. As the data are enormous I do not want to refer the actual name in the programming. I want to call them using a variable in programming.
NameComment DOB
David 25 August 1988
David 13 September 1982
David 24 May 1990
William 24 March 1980
William 25 July 1987
William 13 August 1989
Rita 17 July 1990
Rita 24 April 1989
Rita 13 June 1988
The example file is attached
In the spreadsheet shown below I would like the user to select a project via a dropdown list in cell B2 which is from the data set shown in row 7 downwards. Then based on the project they select, they need to be able to see all of the locations associated with that project and choose in B3. Finally they then need to be able to select a team which is associated with the project & location combination chosen in cells B2 and B3.
Excel 2007
ABC2
Project3Location4Team56ProjectLocationTeam7Project 1PerthTeam 18Project 1MelbourneTeam 29
Project 1SydneyTeam 110Project 1Brisbane Team 111Project 1Brisbane Team 312Project 1DarwinTeam 413
Project 1DarwinTeam 514Project 2PerthTeam 315Project 2PerthTeam 416Project 2MelbourneTeam 117
Project 2MelbourneTeam 218Project 2SydneyTeam 419Project 2Brisbane Team 6
I've been going round in circles with this for hours and have got no-where. I 'm trying to get Excel to paste in a set pattern of data based on an input cell.
In row 1 I have months starting in cell B1. B1 = April 12, C1 = May 12, D1 = June 12, and so on
The user would enter the data in column A, starting in row 2
If the date in A2 = May 12 then Excel would enter 10 in cell C2, 20 in cell D2 and 30 in cell E2. If the date in A2 is changed to June 12, then the previous data would be cleared and Excel would enter 10 in E2, 20 in F2 and 30 in G2.
Date would be entered in A3, A4, A5 etc and I would want it to post the same fixed data depending on the date the user enters in teh relevant row.
I've tried IF statements and also some code but can't even get near it working.
For what I'd like to do, the attached workbook actually represents 3 worksheet. one input sheet and two output sheets (output1 and output2)
I plan to use command button " CommandButton1" on input sheet to start the calculations
Here's what I want to do after pressing the " CommandButton1" :
1. start with case 1 and find the value of Input A to Input J from input table using Vlookup and paste those values to respective palceholder for inputs in blue colour area above the input table for each input.
2.for empty cell in the input table paste 0 (zero)
3. after this will give results for case 1 inputs on sheets "output1" and "output2" on basis of formulas used for each output
4.then copy the results for case 1 inputs from sheet "output1" and "output2" and paste them on "input sheet " in Output table (its below Input Table) next to case1
5.Do this for all cases (in actual workbook there will be more than 100 cases)
I have created a userform that allows input of information and then deposits the information on a specific sheet. I am looking for a way to have that information not only deposited on the specific sheet it is already set to but also to another sheet based on a selection made from a combo box.
here is my current
I have a list of data that I'm using the index - match function to output data based on user input.
For example, I have:
1 10
2 15
3 20
So when '1' is selected another cell outputs '10'.
However what I want is for example if 1.25 is input, I want it to interpolate to spit out the correct number between 10 and 15.
I want to enter a unique ID into an input box which will tell which row that id is available and then it will again ask me which column the cell needs to be highlighted. Once i enter the data, it will then ask me what is the change in data (again via input box). i can then enter the change data and then it stops.
View 1 Replies View Relatedwhen i choose material from my combobox Options (cboTM), i wanted, only the textboxes regarding to the sheet material unlocked, and the others locked with the color of the form, and the same for the other options like worklabor and equipments. i could blocked for material with this code :
[Code] .....
The prob is, worklabor and equipments will be blocked too, and i dont know how to put correct info on the textboxes.
Attached File : teste1.zip
I have a workbook with 2 - worksheets "DATA" and "LETTER".
The "DATA" sheet has columns "First Name" "Last Name" "Address"...etc.
The user can enter in either a "X" or a "x" in cells B6:B100 on the "DATA" worksheet.
After the user enters a X or x and hits the macro button I need it to copy certain cells from "DATA" worksheet to "LETTER" worksheet. I have listed a example below.
In this example if a "X" or "x" is entered into B6 on "DATA" worksheet and the macro button is hit, then: ....
So I'm creating a UserForm that takes user input to create a worksheet based on the values input. My question is: How to select a range of cells based on a variable input value? For example, it asks how many competitors there are, and the user can input 5, 8, 10, etc. So I want that many cells in Row 1 selected, whatever the value input is.
View 9 Replies View Relatedi am attach an sample excel file here.
1st sheet "sample",
first, the marco look for column c "F No."
if it search the content start with "F" and follow by 8 digit numberic,
2nd sheet "pop up",
then pop up userform to ask user to key in the textbox there. if it search for as many as "F" with 8 digit numberic, it will show at the userform and ask user to key in the data in the textbox there..
3rd sheet "key in",
user can key in any data they want
4th sheet "output",
after the user click the "OK" button
all the data put in the textbox there can automatic go to the column "a"
can refer by the sheet output..
I have created a userform and it works fine.Following code is assigned to commandbutton to transfer data to sheet "FT".
[Code].....
I want to add that : If value in combobox2 is “ KT” then all entries are copied to sheet3
Otherwise copy everything in sheet”FT”
Other parameters remain same.
I am using the combo box that lists the loan officers number from the selection the loan officers name and branch is loaded. I want to be able also base on the officer selected add get the total new loans opened by that officer. I added an if statement that checks if the loan officers number from the "Oct_2012" is equal to the loan officers' selection from the combo box then add all the loans than match that criteria. I am not sure if what I am doing will work but when it reach to the For block it only reads the For statement and then go to the endif and don't execute the statement within the block.
Code:
Sub cmbLnOffNum_Change()
Dim idx As Long
Dim LnOffRow As Long
[Code]....
Basically, I have a Userform and am trying to have a user enter 1 datapoint into a Textbox. Based upon that datapoint (it's 9 digits), I am trying to see if I can therefore reference a linked Access Table to fill in other textboxes with information tied to that record (so if they enter a unqiue ID, I want to automatically return Name of Person, Location, etc.) . I liken it to a vlookup in regular Excel but am just not sure how to go about it in VBA.
View 2 Replies View RelatedTrying to use Excel Data List to create a database style report. IE. Originally blank sheet, which is only populated by data containing data matching "filters" input into cells ( say A1 & A2 )
I.e. A1 = Delivery week to be filtered by, and B1 Manufacturer Name
So if I type week "1" into A1 & Manufacturer "Microsoft" into A2, it will show a table only containing data Microsoft, Week 1, and associated data for those lines across the screen.
Week 1
Microsoft
PO number : Date Ordered: Address 1, 2 3 etc....
0011 01/01/13 Somewhere
0015 02/01/13 Anywhere
0213 05/01/13 Nowhere
I know this is much easier with a database, however my manager insists a database cannot be used, and it must be in a spreadsheet format !