I have a form with a number of fields. There is a field at the top of the form for Part number. When I type in a part number I need the form to auto complete any fields that are linked (if i can link them). E.g., if the part number is 111 then based on info in another table the fields will be auto completed for me.
View 2 RepliesI have a workbook with 2 - worksheets "DATA" and "LETTER".
The "DATA" sheet has columns "First Name" "Last Name" "Address"...etc.
The user can enter in either a "X" or a "x" in cells B6:B100 on the "DATA" worksheet.
After the user enters a X or x and hits the macro button I need it to copy certain cells from "DATA" worksheet to "LETTER" worksheet. I have listed a example below.
In this example if a "X" or "x" is entered into B6 on "DATA" worksheet and the macro button is hit, then: ....
I'm trying to copy data from one sheet to another sheet automatically based on a number selected in a drop down control.
I have used OFFSET to pull some information successfully from a list. This is easy for me to do with single entries and a list and has worked well. I want to do similar but with a dataset not just single cells.
But, I can't seem to make OFFSET work to show a set of data easily.
Perhaps I will need VB code to do so? Or there is another control I'm not aware of? I've done very little with VB.
I'll attach a sample file to try to show better what I'm trying to do.
I am trying to create a combo box whereby i need to populate a list of name into the box and when user click on the name, it will linked it to the corresponding letter in MS Word.
Have tried a number of codes available in this forum (to populate the combo box) but were not successful.
I have a sheet where I have a "Status" column in each row which could be "Waiting for Band", "Waiting for Organizer", or "Ready to Go!". These options are set as a data validation list. I have 2 cells later in each row where the response can only be "Yes" or "No". I want for the Status column to be set automatically based on the responses in the later two cells. So for example
where C3 and M3 are Yes, the status column in B3 should read "Ready to Go!"
where C3 is no but M3 is yes, the status column should read "Waiting for Organizer"
where C3 is no and M3 is no, the status column should read "Waiting for Band"
The above is actually an exhaustive list of all of the potential outcomes(!)
I want to be able to show only the dates whose months are selected in the drop down in cell A1. I've been able to do this with a Macro that I must run every time I change A1; however, I was wondering if there was a way to have the macro done automatically. I've been trying the Worksheet_Change options with little command. In addition to all of the If/Thens, I've also tried the If/ElseIfs as well:
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "$A$2" Then
If Target = "January" Then
ActiveSheet.Range("$A$2:$C$14").AutoFilter Field:=1, Criteria1:= _
xlFilterAllDatesInPeriodJanuary, Operator:=xlFilterDynamic
[Code] .....
I am new to VB macros, I am trying to figure out how to color a tab Green based on a selection from a drop down list.
View 9 Replies View RelatedI need to make a dropdown list (I know how to do that) and based on that selection, I need some cells below to automatically complete. How can I do that? Is it possible with or without VBA?
View 5 Replies View RelatedI have a spreadsheet where user can search for information inside a search box and the appropriate rows are returned using formulas.
I have a drop down list (Category: Model) in the search box as well as a search field (Category: Program, cell D2). Underneath the search box, search rows are returned with column categories: Program, Model, etc.
What I require is that if a user enters the specific program into the search field D2, then the dropdown list would automatically choose which model that program belongs to based on the returned row.
For example, if I typed "engine" into D2 and pressed enter,
Under the records section (Row 14 and beyond), the following record will pop up:
Program
Model
Indicators
Engine
F-16
3a
Based on the record, F-16 would be chosen from the dropdown list. Is there any way this can be done?
I have a workbook that has two worksheets. One worksheet is an input worksheet. A user will select a date from a drop-down list and type in the events that occurred on that date in 8 adjacent cells. The user selects a button that advances date and clears form. On sheet 2, whatever was typed into sheet one is saved via VLOOKUP formula. However, if I try to change something retroactively and select a previous date from the drop-down list, it clears everything in sheet 2 that was typed for any selected day.
View 1 Replies View Related I'm trying to create financial statements on a sheet with quarterly and annual data. Is it possible to create like a button to change inputs on a cell
Income Statement for Abercrombie Fitch Company Class A ANF from Morningstar.com (2).jpgIncome Statement for Abercrombie Fitch Company Class A ANF from Morningstar.com2 (2).jpg
whats the best way to insert a button like in the jpg example
it has been eye opening to say the least. I have a question however, I am in the process of creating a workbook of different things for my construction company and I am stuck. Is there a way that I can pull a cost code from a drop down and have whatever data is inputted into the cell to the right automatically transfered to a budget report (another sheet)? Example - Inputting time for my crews - select a code from the drop down list say for "concrete" Then I input the crews hours per day in subsequent columns and then sum it up at the final column. Can the sum of the hours worked doing "concrete" then automatically be transposed to the budget in the "concrete" section?
View 9 Replies View RelatedIf a user selects certain options from a drop down list created by cell verification (from list), is it possible to display an input box and have the resulting input populate on another worksheet in the workbook? I have an attendance template I'm working with and if a user selects OT (Over Time) then a input box is displayed prompting for how many hours. The overtime is then tracked on another worksheet.
View 1 Replies View RelatedI am trying to create a single input sheet that automatically feeds data into several other worksheets within the same workbook. Some of the sheets use the same data, some are completely independent of each other. The point of having this is so that users can go in, fill in the input sheet, and the other sheets will automatically be filled with data from the input sheet.
View 1 Replies View RelatedI'm trying to create a spreadsheet that has a data validation in it. I have a drop down list that has to options to select; Yes and no. Every time I create a new row to add more information I have to go through the process of creating a new data validation for for each cell in this coloumn.
Is there anyway of creating a way that every time I insert a new row, a data validation list box will appear in the coloumn that I want it in?
Sample Workbook: datavalhelp.xls
I currently have the following user inputbox that asks the user to enter the company name, of which it then copies the entered name to Cell E1 on the active sheet
Dim strName As String
strName = InputBox(Prompt:="You name please.", _
Title:="COMPANY NAME", Default:="Enter Company Name")
Range("E1") = strName
However, I would prefer it if there was a drop down list to select one of five pre-set company names without having the user to type the name out every time.
Is there a way of setting the input range on a combo box to a vale set in a cell?
ie, if my current input range is A2:A40 and i then users add another 20 records to that column, i need the combo box input range to change to A2:A60, so I can leave the sheet unmonitored for the users to add lines and not have to manually change the input range of the combo box.
I have a dropdown list in C24:C50 (=CategoryList) with data validation and a sub list in D24:D50 (=ItemList) with data validation. I am looking for a way to have code automatically run after selecting an item in the data validation dropdown list in column C.
Example; I click on C24 and make a selection. I what it to trigger code that would move me to D24 and open up the data validation list in D24. After the selection in D24 I would like it to move me back and down 1 row to C25. I have not found anything directly related to this but I have found that code can be run after a selection in a valadition list.
I trying to do a sheet with one combo box (dropdown list) where I want the user to be able to choose "add rows" to make more boxes appear. My idea to solve this was to put all the boxes in the sheet, and then create a macro that either hides or shows the rows with the extra boxes. Now I have a problem that hiding the rows just does that, and only that. The rows disappear, but the combo boxes stay visible (but ends up on top of eachother).
View 2 Replies View RelatedI have worked out (through reading and what not) how to link a combo box to a range in a worksheet. What I need to do is relate what is selected in that combo box, to another combo box which picks from another range. I have a data spreadsheet called "Offices". It's set up as follows
(Sorry, it's really frustrating trying to format it to a table type thing but you get the gist)
ROW NUM______COLUMN A____________COLUMN B
---------------------------------------------------------------
1_____________DistrictOffice1_______...fice1@test.com
---------------------------------------------------------------
2_________________________________OFFICE 1
3_________________________________OFFICE 2
4_________________________________OFFICE 3
5_________________________________OFFICE 4
---------------------------------------------------------------
6_____________DistrictOffice2_______...fice2@test.com
---------------------------------------------------------------
7_________________________________OFFICE 2...............
I am preparing a template for which I need a combo box. Becaue it is a template I can't have this combo box any specific input range. Because I won't know how long the data column (that wiill be used for input range) will be.
Also the data column will have many duplicates but the combo box needs to show uniques only.
I have a combo box in a worksheet with a macro written for it that works fine but when I open the worksheet it doesn't run automatically, I have to find the macro and tell it to run.
How can I get it to run as soon as the worksheet is opened
Here is the code for the macro
Private Sub combobox()
ComboBox1.clear
ComboBox1.AddItem "Mit Rekuperator"
ComboBox1.AddItem "Ohne Rekuperator"
End Sub
Private Sub ComboBox1_Change()
Run "PinchInternHeatExchanger"
Select Case ComboBox1.Text
Case "Mit Rekuperator"
ActiveSheet.Range("I62") = Worksheets("uorc").Range("L99")
Case "Ohne Rekuperator"
ActiveSheet.Range("I62") = Worksheets("uorc").Range("E11")
End Select
Run "PinchPoint"
End Sub
I could need a code for a Combo Box to selects the range in Column A. The range includes all non-blank cells.
View 9 Replies View RelatedCreating a working userform that takes data input from the user and puts it onto a spread sheet.
That data is then used to calculate a result (via the spreadsheet), and I want that result to show on the userform when the data is submitted (if that makes sense?)
Example attachment is included. The goal of this is to extract data off of another sheet based upon an input value. It's easy enough to where the input value will be equivalent to the sheet name I want to reference. The example I provide incorporates code that works successfully. The only problems I have are:
1. The select method only works on the active sheet. I want to be able to call this while another sheet is active.
2. My code is very inefficient and takes a while to execute. I'd like to cut down on the execution time.
I am trying to move (archive) data from one sheet to another sheet based on a date range provided by the user’s input. If the date on sheet “list” in the cells in range R9:R10000 fall within that date range the following takes place. The rows that meet the date range per the user’s input in the range of R9:R1000 are copied and just the values are pasted into the next empty row starting with row 7 on the “report” worksheet. The cells that are copied on the “List” worksheet are NOT deleted but the contents are cleared. The reason for this is because there are formulas/links in those cells.
I have attached a worksheet example and have some VBA code but it does not work.
I have a excel file to keep track of sales pipeline. What I am looking for, is an automated utility or code that will allow excel to automatically move entire rows once a task is completed and can be moved to another sheet. In Prospects sheet I have a column for " Stage" and here you have to select from a drop down menu, either "Prospect", "Contacted" "quoted" "WON" "LOST" What I would like, is that once you have selected one of the sales stage, the entire row or entry, will be automatically moved to the right tab from the "prospects" to a new sheet according to each stage.
SalesPipeline.xlsx
Changing the data based on a drop down selection. My drop down list is based on the months I need the data (percentages for each person) to change depending on which month is chosen. So If I select Jan, the percentage fills in for each person. I've attached an example.
View 3 Replies View RelatedI have a list of staff in cell A1 in a drop down list. In cell A2, I would like Excel to populate automatically the branch from which the staff is from when I choose the staff name in cell A1.
View 3 Replies View RelatedI want to create a input box that has a drop down list on it. This is for excel, and is for a model that I am creating. Ther model requiresd the user to enter some data before the model can run. At the moment I can create input boxes where the user can manually enter an input, or yes/no choice boxes. However I want the box to have a drop down list. i.e. there may be a rang of 13 or 14 diffent options somewhere on a worksheet, and the dropdown should be made up of these.
View 3 Replies View Related