Data Extraction Multiple Workbooks And Sheets To Master Spreadsheet
Mar 20, 2009
I have directory with multiple workbooks. Each workbook contains multiple sheets (sheet 1, sheet 2, etc). On each sheet of the workbook, there are various data. The data I am looking to extract from these sheets are in the same cell of each sheet. (See data sheet –datasheet.xls). If I can extract these data without opening the file, it would be preferred. Otherwise, opening the workbook, extract the data, and then close the workbook is acceptable.
Desired Solution:
I would like the assistance to create a macro that will extract data from each sheet of the workbook in the directory at a time until all the workbooks and sheets within the directory are read. The macro shall extract data from cell B5, B6, B10:B20, and sheet name from each sheet of the workbook and copy these data to an active sheet called “US” on workbook, DesireResult.xls. The DesireResult.xls shows how the data should be copied over. Before copying the data to the DesireResult.xls workbook, the macro will prompt the user to enter a cell on the “US” sheet as the starting point to paste the information to. Prompting the user to enter the beginning cell shall happen only once and not for each workbook or sheet being read. The reason for this is because the “US” sheet will already have other data in it. After reading each sheet, the macro shall leave a blank row at the end. The data from the next sheet shall be pasted below the blank row. Note: all the workbooks contain macro and link to other file. When opening each workbook, the macro should automatically choose not to update the links.
View 4 Replies
ADVERTISEMENT
Dec 19, 2013
I have tried to write the below VBA to copy a specific cell to a specific workbook. I have set the folder path in B1 and listed the file names in column E4 onwards. E1 being the number of files in column E. I get a run-time error 91 "Object variable or With block variable not set" on Current File = ActiveWorkbook.name.
Sub UpdateParameters()
Dim CurrentFile As Workbook
Dim wbOpen As Workbook
[Code]....
View 4 Replies
View Related
Apr 9, 2014
I am trying to combine several workbooks containing data in multiple sheets into a master workbook. All the workbooks have the same number of worksheets. I would like to combine all data in Sheet1 into a new Sheet1, all data from Sheet2 into a new Sheet2, etc.
View 1 Replies
View Related
Sep 17, 2009
I have several workbooks that supervisors in a call center use to grade calls for quality.
Each supervisor has a seperate workbook, and after scoring the call, the supervisor runs a vb script that copies all of the data from the worksheet "observation" onto "sheet1" for storing the data.
So now I want to use another workbook to:
1. Copy each sheet1 from all of the supervisor workbooks onto a sheet named "cumulative" in a different workbook.
In a perfect world it would also:
2. Keep a count of how many observations were done by each supervisor each day
3. Keep a count of how many have been done week to date
4. Keep a count how many have been done total since January 1, 2009
Each workbook is kept on a network drive at s:supervisorsqadata and named - for example QAformMelissa.xls
I'm okay with keeping the master sheet in the same directory if that makes it easier to accomplish this.
View 8 Replies
View Related
Jul 12, 2014
I need a macro that would consolidate all data in multiple worksheets of multiple workbooks in one Master file.
All the workbooks will be in one particular folder. The macro should search for data in all the workbooks and consolidate it in one master excel workbook.
I am currently using both excel 2007 and excel 2010. This macro would really reduce manual work as currently consolidating data from 45 to 50 sheets takes an ample amount of time...
View 4 Replies
View Related
Jul 9, 2012
I got a master format in xl2010 to collect data, which is being circulated between my team. members fill in their respective data n mail back the file with their name attached to file name. i want to creat a macro which can copy the data from every members file to master file.
View 1 Replies
View Related
Aug 4, 2012
I have 17 workbooks which contain similar data and formatting. The only variance is the number of rows of data in each. I want to write a macro in the Master worksheet that will accomplish the following
1. Create a worksheet name in the master workbook with the same name as the workbook that it's pulling data from.
2. Copy over the column headings from columns A:P to the newly created worksheet on the master workbook
3. Copy over all rows that contain the word "down" under column D titled Operational status
The naming convention for the master workbook will be titled "All Switches". The naming convention for the worksheets containing the data are titled Port_Map_on_tiegcsw01, Port_Map_on_tiegcsw02, Port_Map_on_nypgcsw01. There are other names , but I can reference the code an update accordingly.
I found some searches on the forum for creating a macro to copy data between workbooks, but not quite sure how to write the macro for the three functions.
View 2 Replies
View Related
May 28, 2014
I am trying to automatically transfer data from nonadjacent cells (C1, B5,B10,B16,B22,B28) from multiple workbooks in a masterworkbook folder from A2:F2. I am a novice at VBA. I am not able to copy as Range("C1,B5,B10,B16,B22,B28") and the way it currently is coded only the last copied range (B28) is pasted to the master workbook. The data pastes to A2 in the master workbook instead of F2 where I want it. I need copying the cells from the workbooks into row 2 in the master bookbook. Here is what I currently have:
Sub LoopThroughDirectory()
Dim MyFile As String
Dim erow
MyFile = Dir("C:ToolFolderWorkObjectives")
[Code].....
View 9 Replies
View Related
Aug 2, 2013
I have three source workbooks that needed to be consolidated into a master workbook pasting the data with values & formatting.
The Master workbook also contains 6 additional worksheets that link to the data pulled in from the source files.
My question is how do I write the code so the source files populate the master in a specific order.
For example, the 3 source files are named "Central" "NED" and "WEST" and I need them to populate the master workbook in that order.
This is the code I am using to consolidate the data:
Option Explicit
Sub ConsolidateSheetsFromWorkbooks()
'Author: Jennifer Starr
'Date: 7/12/2013
'Summary: Open all files in a folder and merge data (stacked) on all
[Code] .....
View 1 Replies
View Related
Apr 16, 2014
I have created timesheets for employees that work in our shop. Our company manufactures products for different industries, such as mining, wind power generation, general industrial applications, and so forth. I modified some time sheet templates I found for excel to accommodate our company's actions. Each employee has their own workbook, in which the months are separated into different worksheets. Each sheet is divided further into weeks and in each weekly section the areas of information are divided as follows:
A / B / C / D / E / F / G / H / I / J / K / L / M
Work Sector / Workshop or Fieldservice / Scope of Work / Job # / Reg or OT / Mon / Tue / Wed / Thu / Fri / Sat / Sun / Total
There are 7 workbooks (one for each employee), each with 12 sheets (one for each month). I want to create a master sheet that will pull information from everyone's timesheet if they worked on a particular job. In other words, I would like to type a job number into a cell, then have excel look through everyone's timesheets and pull over only the rows of information that contain that job number
View 12 Replies
View Related
Feb 16, 2012
We have a master worksheet, and I cant let staff see it, but I want them to update 'their bits' themselves, rather than email the admin staff and let them update the master sheet..
every job is on its own row and contains a unique ID.
is there a way i can merge their data in to the correct row and column(s) on the master sheet?
i've been playing with datasources etc
Excel 2010
View 2 Replies
View Related
Aug 24, 2013
I currently have an excel work book with multiple sheets per year. What I want to happen is that whenever I input data in one of the Year sheets, it will automatically go to the Master sheet.
See attached file for sample
Sample.xlsx
View 8 Replies
View Related
May 22, 2013
So lets say I have 3 different sheets each with information on them like this:
Sheet 1 Sheet2 Sheet 3
item1|2 item2|7 item1|4
item3|5 item3|6 item6|2
item9|7 item8|4 item7|8
The first part (code#) is a code for an item. The second number is the quantity of that item. What I need to do, is to be able to populate a master list which will pull the quantity of each item and sum them up. In the above case, the master list would look like this:
item1|6
item2|7
item3|11
item4|0
item5|0
item6|2
item7|8
item8|4
item9|7
View 2 Replies
View Related
Oct 10, 2013
I have multiple data sheets with tables and I want to create a master sheet table that automaticly will update when now rows/data is added in to the sheets in any of the data sheets.
Master sheet will look like this (the first 3 letters is the data sheet name), this is just the first column there a a lot more columns to be added
AAB08
AAB09
AAB10
AAB11
AAB12
[Code] .......
So when let's say in sheet AAB I add another row AAD13 I want the master sheet to update automaticly so it looks like this
AAB08
AAB09
AAB10
AAB11
AAB12
[Code] ......
Is this possible?
View 1 Replies
View Related
Apr 24, 2008
I have been trying to make a code that copies all the data in A2:K50 in all the sheets (about 32 of them right now) and paste that information in 1 sheet (Master List). The code does work but for some sheets it only copies the first 2 or 3 records. Also, this code puts the name of the sheet the data came from but for the first 2 records in puts in the Master List its pasting the wrong Sheet name.
Sub SummurizeSheets()
Dim ws As Worksheet
Dim lastRng As Range
Application.ScreenUpdating = False
Sheets("Master List").Activate
View 9 Replies
View Related
Feb 5, 2013
Copying data from multiple worksheets, but my problem is quite the reverse.
I have data for each month as a worksheet from 1970-2012. They are in a workbook with the recent years at first and the oldest years at the end/..
Like 2012Dec,2012Nov...............1970Feb,1970Jan
I would like to know how to write a macro to copy a range of data from Jan 1970 then add data from Feb 1970 and so on until Dec 2012.. The range remains the same throughout all the sheets.
I was able to do a rough code, but I am stuck doing the reverse part...
Code:
Sub ReverseList()
Dim Sht As Worksheet
For Each Sht In ActiveWorkbook.Worksheets
If Sht.Name "MEGA" Then
Sht.Select
Range("A:A").Insert
[Code] ..........
Also is it possible to restrict the range selection in each sheet based on the month and year?? For Ex. Accounting for leap year and 30 day months...
View 4 Replies
View Related
Aug 25, 2009
I have a large spreadsheet which I need to split into individual workbooks by reference to a particular column.
Rather then doing this manually and splitting the data out one at a time - I would like a macro to do this for me.
I am a novice excel user.
View 9 Replies
View Related
Mar 28, 2014
I have a folder with multiples excel sheets
Destination : C: Project CustomerExcel
I would like to extract and compile the information contained in these cells:
a5,c5,a6,c6,c7,a14,g14,e16,g16,e18,i18,a20,g20,h22,j22,h24,l24 all the sheets.
New sheet would contain the information of each sheet eg. Column A2= file name
And Row B2 to R2 or whatever will be the corresponding cells mentioned above for each cell. The code I have only brings back the file name but only a5 from the range but not the rest.
VB:
Sub MergeAllWorkbooks()
Dim SummarySheet As Worksheet
Dim FolderPath As String
Dim NRow As Long
Dim FileName As String
Dim WorkBk As Workbook
Dim SourceRange As Range
[Code] .....
View 5 Replies
View Related
Apr 24, 2013
I have daily production sheets (Excel sheets) that I fill out every day indicating the day's production totals. The files are named by the day's date. For example today's sheet (4/24/13) would be 042413.xls. However, I would like to be able to pull certain pieces of information into another separate spreadsheet. For example, my boss asked me how many of a certain product we made over the last month. So, I'd like to pull the product info, the date made, and quantity made into another sheet. And I'd like to be able to do this automatically for a date range that I specify.
View 8 Replies
View Related
Jan 20, 2010
Example attachment is included. The goal of this is to extract data off of another sheet based upon an input value. It's easy enough to where the input value will be equivalent to the sheet name I want to reference. The example I provide incorporates code that works successfully. The only problems I have are:
1. The select method only works on the active sheet. I want to be able to call this while another sheet is active.
2. My code is very inefficient and takes a while to execute. I'd like to cut down on the execution time.
View 2 Replies
View Related
Sep 23, 2007
I have been working on this project for some time and still haven't got anywhere with it. What I am essentially trying to do is create a master summary workbook where by you press a button to activate a chunk of VBA that will grab the same range of data from multiple workbooks but also multiple sheets in those workbooks, only problem is the number of sheets in each workbook are constantly changing so I need first find some way of accessing a closed workbooks, then I need a way of looping through a segment of code that will look into approximately 10 workbooks all with a different number of sheets and taking a fixed range of cells out of each sheet and for every workbook make a new tab and paste the information in that tab then move onto the next workbook, find the number of tabs (missing out the first 3 tabs of every workbook) and copy and paste the fixed range from each tab onto a new tab the summary workbook.
I will then have a summary workbook with a number of tabs, each one a different workbook with all the data from all the tabs in that workbook, I can then pull that information using formulas or some more VBA into a summary tab on the summary workbook, consolidating all of the information.
View 6 Replies
View Related
Oct 7, 2009
I want create a macro which will extract 6 values (see below) from a workbook tab called summary to an master workbook for reporting purposes. Each workbook has a unique file name e,g ACI1150.
Values on sheet SUMMARY:
A1
A2
A3
G21
G24
G26
I tried to adapt the below to get one item copied/extracted. However it would no work.
I am new to using macros
Sub GetG26s()
Dim MyDir As String, FN As String, SN As String, NR As Long
Application.ScreenUpdating = False
View 9 Replies
View Related
May 27, 2014
I have a folder containing about 56 workbooks each uniquely named with a tab just called "Worksheet". What I'd like to do is make a master file that creates 56 tabs, each tab being from 1 of the 56 workbooks.
I tried creating a macro but it is bugging out on me after the first workbook and I'm not that strong in VBA. Below is the macro I've been working on (I've excluded the folder path for obvious reasons):
Sub Merge()
Path = "--------"
Filename = Dir(Path & "*.xlsx")
Do While Filename ""
Workbooks.Open Filename:=Path & Filename, ReadOnly:=True
For Each Sheet In ActiveWorkbook.Sheets
Sheet.Copy After:=ThisWorkbook.Sheets(1)
Next Sheet
Workbooks(Filename).Close
Filename = Dir()
Loop
End Sub
I could manually do it but this will be a recurring event where the file names will not be similar, so I'd like to build a process to handle that scenario.
View 2 Replies
View Related
Mar 21, 2009
I have a folder that contains many workbooks that contain the same layout of information just with different workbook names. Im looking to copy certain customer information from each WB to a master sheet, such as name, adress, city, ect.
-Folder to lookin for all WB's information - D:Documents and SettingsRonMy DocumentsNew Folder (3)
-The sheet to copy the info from in each WB is named "Quote"
-The ranges to copy are B5:D5, B6:D6, F6:I6, K6:M6
-I want to use a command button to trigger the code and copy the info to the open WB on Sheet12.
-The info going into in sheet12 is layed out across each column.
Example of Sheet12:
A1 = B5:D5, B1 = B6:D6, C1= F6:I6, D1 = K6:M6, so each copied WB will used the same layout and just copy to the next line.
Example :
A1 = B5:D5, B1 = B6:D6, C1= F6:I6, D1 = K6:M6 (Ea. WB information)
A2 = B5:D5, B1 = B6:D6, C1= F6:I6, D1 = K6:M6 (Ea. WB information)
A3 = B5:D5, B1 = B6:D6, C1= F6:I6, D1 = K6:M6 (Ea. WB information)
View 9 Replies
View Related
Apr 9, 2013
I will have about 100 files to merge together that are in one directory. Is it possible to merge all workSHEETS named "Bob" from each workBOOK and end up with just one master file?
I found this code on this web site (no proper reference!). It doesn't work for me. Yes, I changed the directory and it still didn't work. I will have 12 columns (A:L) and differing # of rows in each "Bob" worksheet.
VB:
Sub g_CombineMultWB_AllXLSFiles() ' This Will combine all EMALL XLS files located in the
' S:DMSMSPOMSMaster POMS NIIN DataMaster EMALL Data FilesEMALL Excel Folder
' into a single worksheet in a newly created (or previously existing) workbook
[Code]....
View 3 Replies
View Related
Jun 12, 2013
how to consolidate multiple workbooks into the master workbook? I need to consolidate 12 workbooks into the master workbook every month. The subsidiaries will report me their figures monthly. Hereby attached one of the subsi, "B Co" reporting package, and the master copy "XYZ Holding Co" how it look like. Hence, may I know how to write a macro so that it will auto update monthly when the subsidiaries return me their reporting package, so that I can auto update in my master copy for tab BS and tab PL.
View 6 Replies
View Related
Jul 3, 2013
I need to consolidate a lot of information from multiple workbooks all the workbooks are located in a folder, i am not bothered about running each one separately or a group at a time, each work book has ten sheets with each sheet in the workbook being different, it needs to add to the next blank row on each sheet.
View 1 Replies
View Related
Jul 23, 2013
I would like to merge multiple workbooks into a master workbook. All the individual workbooks are identical and only have 1 sheet, and I would like to append them to the master as worksheets then sum them all together. The front sheet showing the totals from all the merged ones.
View 5 Replies
View Related
Dec 27, 2012
At our small firm, each staff member keeps a small excel spread sheet on the network that contains their "work in progress." This spreadsheet is roughly six columns wide and roughly twenty lines long.
What I am attempting to do is have one "master" spreadsheet with a tab for each staff member that links their "work in progress" so that partners and managers can easily see how much work each of the fifteen or so staff members have.
I can create fifteen different tabs and fifteen different files on the network and link =[Staff1.xlsx]Sheet1!$A$1:$G$25 =[Staff2.xlsx]Sheet1!$A$1:$G$25 =[Staff3.xlsx]Sheet1!$A$1:$G$25 and so on.
If I make a change to the layout of the work in progress sheet, I have to delete and copy the file fifteen times, then go back through and re-link fifteen tabs to fifteen workbooks in order to keep it uniform.
View 1 Replies
View Related
Apr 8, 2014
I'm trying to take a single worksheet from a workbook and merge them all into one workbook. In that master workbook I'm looking to have each of the worksheets on different tabs and the tab names as the original workbook name.
So if I have Workbook1, Workbook2, Workbook3, Workbook4 in a folder. I want to open a new spreadsheet, run this macro, select the folder with the Workbooks in, and have it take the range selected from the worksheet 'other' from each of the workbooks and generate a 'master' Spreasheet where each tab would be called Workbook1, Workbook2, Workbook3, Workbook4 and the contents would be from the 'other' tab
I found some of Ron de Bruin's code online which I've tried to customise.
Currently this takes a range from the tab specified, puts it into an array and then pastes it all into different columns on one worksheet. change this so that it creates a new worksheet for each original workbook, and names it after that workbook.
View 4 Replies
View Related
