I have a table of data which I would like to filter based on a manual cell input instead of the autofilter option.
The table has tickers in column B and has information from column B to U. I would like to filter the data based on a manual ticker that I enter.
I can select the top cell in column "F" after filtering by multiple columns using VBA and arrays, but now want to I want to use the top cell in column "F" to search for all other equipment that uses this item.
E.g. remove filter, and reapply autofilter to column "F" based on selected cell as per below VBA
Note: Row 1 contains command buttons and row 2 Headers.
In my table I want to create a user form where the individual would enter a number which would correspond for the Header Row.
and
The user would also enter a Number that would correspond for the first main column (Column B).
Based on the numbers entered, I want to find the next highest number.
For example if 61 is entered 66 would be chosen.
-Same would be for the numbers entered to find the column.
Based on the numbers entered I would like to find the intersecting cell.
Basic code I can embed in a user form?
I've created drop-down lists in cells B3 and B4 (this is in worksheet 1), based on a column in Worksheet 2. I'd like Worksheet 2 to autofilter the data based on the drop-downs in B3 or B4, or both together.
View 2 Replies View RelatedI have lot of data in three columns like this. The first column is "Name", the second is "Comment" wherein I want the macro to write some comment, the third one is DOB. The problem is that the names in column 1 repeats many times. I want a macro to write in column B "either Old or Older or Oldest" based on the Name and DOB. Thus David with DOB 13 Sep 1982 be marked Oldest in Column B and David with DOB 25 Aug 1988 be marked Older and David with DOB 24 May 1990 be marked Old. Similarly William and Rita should be marked either old or older or oldest. As the data are enormous I do not want to refer the actual name in the programming. I want to call them using a variable in programming.
NameComment DOB
David 25 August 1988
David 13 September 1982
David 24 May 1990
William 24 March 1980
William 25 July 1987
William 13 August 1989
Rita 17 July 1990
Rita 24 April 1989
Rita 13 June 1988
The example file is attached
I want to enter a unique ID into an input box which will tell which row that id is available and then it will again ask me which column the cell needs to be highlighted. Once i enter the data, it will then ask me what is the change in data (again via input box). i can then enter the change data and then it stops.
View 1 Replies View RelatedI am using the following to autofilter a column based on a month number
Worksheets("Data").Range("$A:$M").AutoFilter Field:=8, Criteria1:=Month(tempmon)
tempmon contains the month number (e.g 9 for september)
when I run this it filters but tempmon is equaling 1 when I know it is set to 9
i have tried
Worksheets("Data").Range("$A:$M").AutoFilter Field:=8, Criteria1:=Month(9)
I have a 'Summary' worksheet which is shown as:
August
September
October
Example 1
1
4
5
The table, which works correctly, looks in another worksheet 'Report' for 'Example 1' within the date range of August. This uses COUNTIFS.
Ideally, what I'm wanting to do is have an auto-filter on each of the cells - 'Example 1', 'Example 2', so if a user wants to see what rows on the 'Report' sheet, falls into this criteria, it auto filters the other worksheet, and takes them too it.
The action would be - Click on the cell of 'Example 1', the macro auto-filters based on the cells value in column F of the 'Report' sheet, and takes the user there. The macro would have to take into account the date filter as well, which uses cells A1,B1 for August, and C1,D1, for September.
I'm trying to write a program for work. One sheet (whereiseverything.xls) will have a list of parts column E and where it is in the process column (k). Column E of this sheet will have multiple part numbers. (Sometimes duplicated.) I would like to figure out how to write a code to Auto filter (whereiseverything.xls) sheet and copy only one P/N from (whereiseverything.xls) column E onto another Workbook Worksheet (Commit status.xls) column. After that the sheet must copy all of the locations of that P/N from whereiseverything.xls column K into and under the P/N of the Commitstatus.xls.
It will continue to autofilter and copy from where is everything, the "one" p/n and all of its locations into another empty column of Commitstatus.xls until it no longer has part numbers to autofilter on whereiseverything. I am extremely green on VBA programming but here is my first attempt.
Windows("Where is everything commits .xls").Activate
Windows("whereiseverything[1].xxx").Activate
Columns("D:D").Select
Selection.AutoFilter
Windows("Where is everything commits .xls").Activate
Windows("whereiseverything[1].xxx").Activate
Selection.AutoFilter Field:=1, Criteria1:="7516113-905" \<--this Is one p/n
Columns("J:J").Select
Selection.Copy....................................
Iam trying to auto filter a data range based on criteria passed from a list box selections.I want the auto filter to be filtering column 2 of the data range based on ALL the items SELECTED from a multi-select list box (named listbox2) at the click of a button. Here is what i currently have:
VB:
Sub Cmd1_Click()
Application.ScreenUpdating = False
For i = 0 To ListBox2.ListCount - 1
If Me.ListBox2.Selected(i) Then
Range("A3:C600").AutoFilter Field:=2, Criteria1:=ListBox2.List(i), Operator:=xlFilterValues
[Code]...
It works, only that it filters the data by ONLY the last selected value of the list(i.e only one value item in the list). I want it to loop through ALL the selections, applying filter on column 2 based on EACH of the selections on the list box.
I need to have users input a date range for a report and then use that to autofilter a query from a database.
I think I have it close, but I can't tell what I'm missing. I can see the InputBox dates if I put them into a cell. And the criteria operators come up correct in the Autofilter, but the value shows as Starting and Ending, so it's filtering out everything.
I am looking for a way to have some VBA code running in the background of a worksheet.
I would like the autofilter criteria to be based on a cell reference which can change based on what this cell value is?
I am looking for a way to have some VBA code running in the background of a worksheet.
I would like the autofilter criteria to be based on a cell reference which can change based on what this cell value is?
I'm trying to create an autofilter that can filter each category that gets listed in a specific cell.
I have some code from another sheet which I'm trying to modify to accept more than 1 filter criteria.
[Code] .......
Where W2 lists something like:
"Blasting, Flotation, Drilling" and I want it to filter all three categories in the location J24 to the last row with data in it.
I believe I need to apply "*" in locations but I'm not sure where?
I am trying to get autofilter to work based on cell contents.
Code:
ActiveSheet.Range("$C$1:$C$18371").AutoFilter Field:=1, Criteria1:=">=1.5" _
, Operator:=xlAnd, Criteria2:="
This has to be easier than I am making it out to be!
I have column C as my selection column...so basically if they would like to see any items in rows 7-60, they can put an X in Column C and see an aggregate of those items.
What formula would I use to do the aggregate that is determined by input into column c?
I am looking for a way to autofilter a list in "Sheet2" based on the value in Cell A2 of the ActiveSheet. I have about 20 tabs in a workbook that need to be populated with a monthly sheet that is pasted into "Sheet2" every month.
View 1 Replies View RelatedI have a work book.
In column C27 and down, the user can input a date.
In column M27 down, the user chooses pass or fail.
N8, contains a date chosen by user as the "From" date and P8 the "to" date.
Cell o11 is "Passed" and cell 012 is "failed"
The user can choose a date range and input the from and to date in N8 and P8, this will count the number of pass and fails and input the number in O11 and o12.
Formulas are below.
Code:
=COUNTIFS('Aff MFR'!C27:C1663,">="&'Aff MFR'!N8,'Aff MFR'!C27:C1663,"="&'Aff MFR'!N8,'Aff MFR'!C27:C1663,"
I am looking for a Macro that will search a column for blank cells, and when one is found will add text to the same row in another column. For example: The below is a spreadsheet. I am trying to find something that will search through column "C" in this case and add text (of my choice) to Column "A" if the cell is Blank. So Since cell C1 is Blank then Type "ERROR" is cell A1.
A B C D E
1 X X X X
2 X X X X
3 X X X X X
4 X X X X
5 X X X X
Creating a working userform that takes data input from the user and puts it onto a spread sheet.
That data is then used to calculate a result (via the spreadsheet), and I want that result to show on the userform when the data is submitted (if that makes sense?)
I'm wondering if it is at all possible to have a cell comment automatically update depending on what data is input in the cell (via user input, VLOOKUP, etc.)?
For example, if cell A1 contains the text "CHARLES" with a comment saying "Employee of the Month", and is then subsequently updated with the new text "JOHN" (again, via direct input, a VLOOKUP, data validation, etc.) is there a way to have the comment automatically update to say something else, such as "Team Lead" for example?
I've considered using VBA to accomplish my goal, but am unsure how to compose an effective code to do so. I've also considered perhaps creating a named table filled with all the different comment possibilities I would like to have used in this cell and then inputting a formula in either cell A1, or the comment contained therein, that would then call the corresponding text from that table based on the data in cell A1. Honestly, I'm not sure that what I'm trying to do is even possible;
Formula that will repeat a cell number as it drags down and as soon as the number changes. I am using helper column that shows the cell number. I need to drag this down about 1000 rows.
Excel 2010
A
B
C
1
Helper Column
Desired Result
[Code].....
Example attachment is included. The goal of this is to extract data off of another sheet based upon an input value. It's easy enough to where the input value will be equivalent to the sheet name I want to reference. The example I provide incorporates code that works successfully. The only problems I have are:
1. The select method only works on the active sheet. I want to be able to call this while another sheet is active.
2. My code is very inefficient and takes a while to execute. I'd like to cut down on the execution time.
I am trying to move (archive) data from one sheet to another sheet based on a date range provided by the user’s input. If the date on sheet “list” in the cells in range R9:R10000 fall within that date range the following takes place. The rows that meet the date range per the user’s input in the range of R9:R1000 are copied and just the values are pasted into the next empty row starting with row 7 on the “report” worksheet. The cells that are copied on the “List” worksheet are NOT deleted but the contents are cleared. The reason for this is because there are formulas/links in those cells.
I have attached a worksheet example and have some VBA code but it does not work.
I've have and autofilter in the heading of a column that allows me filter on All, NonBlanks, Blanks, Cell Entries, Etc.....But for some reason when I filter on all a number of rows are hidden or the row height is set to 0 and I can't view the cells unless I change the row height.
View 2 Replies View RelatedI have a form with a number of fields. There is a field at the top of the form for Part number. When I type in a part number I need the form to auto complete any fields that are linked (if i can link them). E.g., if the part number is 111 then based on info in another table the fields will be auto completed for me.
View 2 Replies View RelatedI have a spreadsheet where the start date is manually entered in Cell B1 and an end date is calculated in Cell B3. I would like to have the dates between the start and end date, with a step value of 7 days show in the rows under Cell B3. How do I get this to work?
View 3 Replies View RelatedExcel 2003, I have a list of products with corresponding prices located on a hidden worksheet. I have a spot on another worksheet where users can select a certain product and next to that cell there is a column for price. What I want excel to do is auto-populate the price cell based on what product the user selects. For instance, if the user selects OD2000N, then I want the price to auto-populate with the corresponding price that is found on the hidden sheet. Like I said before, I know this has probably been answered, maybe even mulitple times but I can't seem to find the appropriate thread.
View 9 Replies View RelatedHere is my delimma. I am using the standard InputBox for my users to input the number of errors found for each category in a record from a daily report. The problem I having is that every time the user types in data using the InputBox it overwrites the previous days numbers. I need to set up the InputBox code so that after the user has input the numbers for that day that the next time the InputBox is used it selects the next column to the right and continues to do this for each day.
View 4 Replies View RelatedI am using data validation to restrict the number of Characters a user can input in a range of cells. The number of characters in this however can vary based on which selection they selected in a different cell.
To put this as an example, if the user selects "hello" in cell a1, the data validation would allow 10 letters in the cell range c1:c20. If the person selects "goodbye" in cell a1, then the validation would only allow 7 characters in cell range c1:c20. I have been using the worksheet Change function, however it updates the validation regardless of what cell is changed.
