Fill Range With Values From Another
Aug 16, 2007
I am not even sure if my title matches my problem, but it was the best I could think of. Please take a look at the following code...
Sub Test()
Dim cell As Range
For Each cell In Range("F4", Range("F65536").End(xlUp))
cell.Offset(0, 3) = cell.Offset(0, 2)
Next cell
End Sub
I use similar codes quite a lot. The issue with this is that if I want to add columns or delete columns later on to my spreadsheet, I need to go and change all the previous codes so the columns match up.
My question is, how else can I write a code that has similar functions but with changing references in case I do add or delete columns? I understand that I can define ranges, but I am not sure how I can work with that within a macro.
I am almost sure there are different solutions to this problem, and I would appreciate and be interested in knowing all of them to put them in comparison.
View 9 Replies
ADVERTISEMENT
Jul 21, 2009
Starting in cell J2 and down up to J9 - I need to preset the following values:
3
3
7
7
11
11
15
15
Tried a few times but no success. What am I missing ?
View 4 Replies
View Related
Aug 15, 2008
I have created a User form with Combobox's, which in turn look up cell references in another sheet. In order to make maintainence of the combobox's as easy as possible I'd like the look up as many cells as possible, therefore anyone can easily add additional text to go into the user forms. However I don't want the blank spaces to show until something has been added.
View 9 Replies
View Related
Mar 26, 2014
I have set of data in multiple range ,need to fill the and replace the old values depends upon two column values (AH & AL)
IF Active Calls is "TATA" In AH:AH, and IF Action Onwer Col is "Blank",in AL:AL
Then Fill the Blank cells by Values "SVC" in the col Action Owner,Then Replace Old values by "Updates Awaited" in Status Col(AM:AM)
Find the attachment & basic code take this code for this task
[Code] ....
toggle-2.xlsb
View 5 Replies
View Related
Apr 1, 2009
I have a range of values that are not a constant length. I want a macro that will calculate the range and fill with a formula using the new range. In this example, I need a formula to look at the values in range f464:f471 and calculate the number of values greater than $1000. Column B is a salesman identifier. I can do this manually, but it takes me about 1/2 hour to complete. At every change in "B", I need to place this formula in the open, blank cell in "E" such as highlighted below.
week39
ABCDEF45939SCHTERR-WIEDEMANNDCCDIST-MUSCHANY046039SCHTERR-WIEDEMANNDCCDIST-MUSCHANY046139SCHTERR-WIEDEMANNDCCDIST-MUSCHANY046239SCHTERR-WIEDEMANNDCCDIST-MUSCHANY0463 SCH Total 14042.2146439SCITERR-SULLIVANDCCDIST-MUSCHANY15587.1546539SCITERR-SULLIVANDCCDIST-MUSCHANY7217.2246639SCITERR-SULLIVANDCCDIST-MUSCHANY5316.6246739SCITERR-SULLIVANDCCDIST-MUSCHANY2720.6946839SCITERR-SULLIVANDCCDIST-MUSCHANY520.446939SCITERR-SULLIVANDCCDIST-MUSCHANY195.7147039SCITERR-SULLIVANDCCDIST-MUSCHANY047139SCITERR-SULLIVANDCCDIST-MUSCHANY0472 SCI Total 31557.7947339SCJTERR-VANBUSKIRKDCCDIST-MUSCHANY4190.7147439SCJTERR-VANBUSKIRKDCCDIST-MUSCHANY3219.7647539SCJTERR-VANBUSKIRKDCCDIST-MUSCHANY3187.147639SCJTERR-VANBUSKIRKDCCDIST-MUSCHANY2209.3747739SCJTERR-VANBUSKIRKDCCDIST-MUSCHANY2132.7547839SCJTERR-VANBUSKIRKDCCDIST-MUSCHANY2034.56
Spreadsheet FormulasCellFormulaF463=SUBTOTAL(9,F435:F462)F472=SUBTOTAL(9,F464:F471)
Excel tables to the web >> http://www.excel-jeanie-html.de/index.php?f=1" target="_blank"> Excel Jeanie HTML 4
View 9 Replies
View Related
Dec 21, 2009
I want the macro to go to column F and copy down from the row containing AO NAMES down to the row containing TOTAL with the value within cell C3.
So basically AO NAMES will be the starting point and TOTAL will be the end point for a value to be copied down in a different column.
Example: Value in C3 = EU11
Column B Column F
AO NAME EU11
Chris Wright 1355 EU11
Hazel Thomas 4015EU11
Julie Cunningham 8426EU11
Dawn Cumming 8748EU11
Jacqui Connolly 16597EU11
David Newton 17978EU11
Duncan Cowen 25781EU11
0EU11
0EU11
0EU11
0EU11
0EU11
TotalEU11
View 5 Replies
View Related
Jan 21, 2010
The first two columns in my document coincide with their respective values. Column A (File Number) is coded for Participant Description (Column B) and the values in each row are associated with one another...
However, I have a 3rd column (Article Number) whose values mean the same as the File Number column, but the the rows don't match up.
What I need is a fourth column. In this column I'd like the value from the Participant Description column to be imputed if the Article Number and File Number column are the same.
An example from the attached spread sheet.
A2 = 7, B2 = 6, C2 = 7 - I need D2 to equal B2
That is easy enough, but this is where I get lost...
A2 = 7, B2 = 6, C3 = 7 - I need D2 to equal B2
View 6 Replies
View Related
Sep 30, 2013
I've received a data report where the brand is in an incorrect format, but can be calculated from data in the list.
I have Brand in the format CRY, but it should be in the format CRYS or CRYW (brand + tag for winter or summer). There are other brands that behave in the same way, e.g. THO should become THOS or THOW, PLA should become PLAS or PLAW, FIN should become FINS or FINW.
I've created a new column using IF statements in conjunction with the departure date to work out whether it was a summer or winter booking, and as a result column C is now populated with either Summer13, Winter13/14 or Summer14.
I don't particularly care if it's a summer 13 or 14 booking, they get reported on together. So I now have the brand alongside the season (summer or winter). I built a database to use with the DGET formula:
Brand
Season
Result
CRY
Summer13
CRYS
[Code] ........
And I used DGET to work out what the result should be in column F:
=DGET($N$4:$P$16,"Result",B1:C2)
This works beautifully for Cell F2, but F3 can't seperate the headers (B2 and C2) from the data (B3 and C3) without tripping over B2 and C2.
View 6 Replies
View Related
May 9, 2008
I have two numbers...let's say 1 to 10.
I would like to fill in the middle numbers to lst in Excel as 1 2 3 4 5 6 7 8 9 10.
see attached for an example of waht I'm trying to do.
I can manually do this with the fill handle but I have numbers to fill in the thousands in some cases and tens in others. I would like to automate this process if possible.
View 9 Replies
View Related
Oct 29, 2012
I want to restrict a textbox to only let the user fill negative values. So first of all he/she shouldn't be able to fill in a text, and only values. And if a value is filled in, then it should be a negative value (automatically).
View 4 Replies
View Related
Dec 21, 2009
I am looking for a way for Excel to fill in cells in a column that has data sporadically in it. I am importing a text file into excel and saving it as an Excel file.
In the example attached, I need the numbers filled in all the way down to the next number. I don't care about the text, just the numbers. I realize I can copy and paste, but these files can be several hundred rows long and it seems there should be a better way.
View 4 Replies
View Related
Dec 17, 2011
I am looking for the most efficient was to update cells in the active row from the values of the selected item in a combo box(4 columns).
View 1 Replies
View Related
May 9, 2012
I have a column:
LABEL COUNT
1 of 2
empty cell
1 of 2
empty cell
1 of 2
empty cell
1 of 2
empty cell
1 of 2
empty cell
1 of 16
15 empty cells
I need to fill the empty cell with the "series" (2 of 2, 2 of 16, 3 of 16). This is just an example of data - there are all different series - 1 of 12, 1 of 5, etc.
Anyway - was hoping to highlight the whole column and be able to auto fill instead of having to extend each series. I have tried straightforward fill series which doesnt work of course. I have tried go to special - blanks but cant find right combo to make it work.
Will it work or do I have to either do manually or with a macro?
View 2 Replies
View Related
Sep 18, 2012
I have a table = Columns A - E contain data in a variety of formats
Code1
Code2
Code3
Code 4
Code 5
Code6
dog
9
12/1/1987
hamster
dog,9,,12/1/1987,hamster
What Column F (code 6) should contain is a csv of Columns A-E as shown.
What formula for Column F will automatically fill the values for all data within a row in a csv?
View 6 Replies
View Related
Oct 29, 2012
I want to restrict a textbox to only let the user fill negative values. So first of all he/she shouldn't be able to fill in a text, and only values. And if a value is filled in, then it should be a negative value (automatically).
View 1 Replies
View Related
Feb 1, 2013
I need a macro that will count the number of rows that contain values in column C. I then need to Fill cells in column A with the text "product", cells in column D with text "P", and cells in column I with text "Right" until a blank is found in column C.
View 2 Replies
View Related
Sep 24, 2008
From four known set values at the four corners of a table, how can I fill in the values in between? I.E. the inverse of extrapolating. I have a program within a programme that will do this, so i know its possible, but ideally i would like to be able to do it straight into a spreadsheet.
View 3 Replies
View Related
Feb 22, 2008
create formula/condition to colour fill different cells based on multiple Criteria.
View 3 Replies
View Related
Jun 22, 2008
I need to create a drop-down (or a combo list) list based on a column in a separate worksheet (in the same workbook). The values in the column have many duplications, and I simply want the combo box to return a unique list.
After trying this using various options like drop-down boxes, combo boxes etc it does not seem to work. A drop-down box will return a complete list (including all of the duplicates). In addition the drop-down was linked to a cell and the value returned to the cell was a number based on the position in the list when what I actually wanted was the text. For example - my list in Worksheet 2:
PETS
Cat
Dog
Dog
Cat
Horse
Rabbit...
In Worksheet 1 if I choose 'Dog' from my Combo box (or drop-down) along with showing all of the duplicates it returns '3', instead of what I want 'Dog' and no duplicates.
View 3 Replies
View Related
May 30, 2009
I have the following table:
Month / Year / Value
JAN20060,73
FEB20060,76
MAR20060,76
APR20060,76
MAY20060,73
JUN20060,69
JUL20060,69
AUG20060,73
SEP20060,76
OCT20060,75
NOV20060,74
DEC20060,72
JAN20070,67
FEB20070,68
MAR20070,71
APR20070,75
MAY20070,75
JUN20070,74
JUL20070,71
AUG20070,68
SEP20070,67
OCT20070,7
NOV20070,73
DEC20070,75
I want excel to multiple the values in a specific range.
For example:
I will give 2 dates: MAR 2006 and MAR 2007. Excel should multiple the value 0,76 and 0,71. It's simples because is 2 months. But I have a lot of months (2006 until 2009).
So I would give MAR 2006 and MAR 2009 and excel should multiple the values from MAR 2006, 2007, 2008 and 2009. All the values in the range, but only for March.
The month will never change between the first and the last date.
I think on using VLOOKUP. Then I have the first value and the last one. But how can I tell excel to multiple the range?
The ideal will be a VLOOKUP that returns the ADDRESS of the cell, not the value. But I didn't see this possibility.
View 11 Replies
View Related
Jun 5, 2014
I request you to write a code for me to fill the cell values as "Not Applicable" in Column "AZ", if the "B" Column cell values = "Justified", "Approved LSAR" & "Approved SDAR".
I have attached the work book of what I am trying to accomplish.
View 14 Replies
View Related
Oct 29, 2007
Trying to find a way to fill in a color based on a specified value, up to the last entry.
ie. Within a range ("Range1")T1:T9, anywhere the value is "R" , fill the color red within column P (offset -5 columns to the left) up to the last entry.
..this is something I would like to initiate via button assignment using a VBA script.
eg:
Column..P,.....T
1..................B
2........Red.....R
3........Red.....T
4........Red.....R
5........Red.....V
6........Red.....M
7........Red.....R
8..................X
9..................X
View 11 Replies
View Related
May 27, 2009
Is it possible for a macro to enter the number that is in Range("SYear") into A4, fill that number down 30 rows (31 total A4-A34), then add 1 to the number and put in the next 31 cells..repeat untill the number = Range("EYear"). For example if SYear = 2010 and EYear = 2012, I need 2010 in A4:A34, 2011 in A35:A65, & 2012 in A66:A96.
View 4 Replies
View Related
Nov 8, 2013
I have a button that when I select it, I want it to insert a new column on a different worksheet, enter a numeral, and them fill down to the last column with data. I have the insertion and entering a numeral to work for the button but I can't get the numeral to fill down. I am working with Excel 7 and have posted the code that I have.
Private Sub StepFiveB_Click()
' AddClient Macro
Windows("Final.xlsx").Activate
[Code].....
View 4 Replies
View Related
Mar 24, 2014
I am trying to figure out how to auto-fill a range. I am summing a range from one tab to another, like A1:A5. I want to autofill the subsequent cells to begin with the cell that follows the last of the previous range, so it would autofill as A1:A5, A6:10, A11:15, etc. how to do this?
View 3 Replies
View Related
Feb 24, 2007
My code is extremely slow because it writes a row by row. I am trying to use arrays to fill a range for a problem which is essentilly this:
Let x = 1 to 10
Let y = 1 to 10
Let R = f (z)
f (z) is calculated for various pairs of x and y (coordinates) such as:
(x1,y1), (x1,y2), (x1,y3)....(x10,y9), (x10,y10). I am looking for a code that will fill columns A' and 'B' with x and y in pairs (each x with each y) and values of R in column 'C'.
View 8 Replies
View Related
Jul 23, 2013
I'm trying to discover the best way to accomplish formatting a cell by filling it a certain color based on 2 of 3 criteria of other cells.
Column A has the title of the field. Cells B1:D1 have one of 3 values: Nothing/blank, Complete, or x. If all of the x's are gone within the range of B1:D1, I'd like to automatically format cell A1 to fill in Blue (or any color).
A1__________________B1_________________C1_____________D1
Generic Name______Complete_______________x_____________
If the 'x' in C1 is changed to the value of 'Complete', I'd like A1/Generic Name to be filled in with a color.
View 8 Replies
View Related
Feb 22, 2008
I have a userform (uf_PaxInput) with a Combobox (cmb_flight_dest) which I am trying to populate from a worksheet range ("Dest") using the following code:
VB:
Sub LoadForm()
With uf_PaxInput.cmb_flight_dest
For Each Item In Range("Dest")
.AddItem
Next Item
End With
uf_PaxInput.Show
End Sub
The code seems to run okay however whent the form loads the combobox drops down to show only blank items to select. These blank items number them same number of items that are in my named range ("Dest").
View 6 Replies
View Related
Jul 25, 2008
The idea is to get for some range (size/location doesn't matter) to fill it's cell with numbers from 1 to number of cells, but it doesn't seem to work.
View 9 Replies
View Related
Nov 24, 2008
Function BG(InRange As Range)
Range("InRange").Select
With Selection.Interior
.ColorIndex = 6
.Pattern = xlSolid
End With
End Function
That so far but not quite sure why that isnt working. I want to change the fill color with a UDF that all they do is select a Range and it changes those fill colors to whatever the Colorindex may be. I didnt find anything while searching the forums with this already.
View 4 Replies
View Related
