I have created a User form with Combobox's, which in turn look up cell references in another sheet. In order to make maintainence of the combobox's as easy as possible I'd like the look up as many cells as possible, therefore anyone can easily add additional text to go into the user forms. However I don't want the blank spaces to show until something has been added.
View 9 RepliesI found this thread which deal with populating unique values in my listbox.
Here is the thread link. [URL] ........
What these line of code mean (the ones in red).
Code:
Private Sub UserForm_Initialize()
Dim v, e
With Sheets("maintenance").Range("c2:c500")
v = .Value
End With
With CreateObject("scripting.dictionary")
[Code] ......
Note : I simple tried to check the value of v by giving msgbox (v), just below the line v = .Value.
But I got run-time error 13 : Type mismatch error.
I've been trying for hours to populate a textbox on a userform based on a combo box. I'm including a zip of my workbook to see. (don't laugh to hard at my code, like I said I'm green...:) When you select a mix design in my form I want the next six combo boxes to populate. The way I have it now is based on one of the many examples found here, (none of which have worked for me so far, but this one said "the simplest way to do this is......") And I get an error 425 - "Object not found". I've done searches based on the error but haven't found an answer.
View 4 Replies View RelatedIs it possible to count the number of comboboxes on a userform? Or better yet can I fill an Array with all the combobox names on a userform? I can count the controls on a userform but I'm trying to count just the comboboxes? Instead of all the labels and textboxes and frames.
I would like to loop through them for validation instead of doing it by each one by itself!
i want to use a listbox or combobox on a userform with the values coming from column A in the MAIN sheet. what i need is if the colour i want is not there i type the new colour in it then adds the value to the end of values in coloumn A and too the list for the next time i use the userform. is it possible to do this and how?
View 3 Replies View Relatedi need to be able to fill a combo box on a userform with the data on sheet1 and when you select the item from the combobox it will populate the textbox below.
View 5 Replies View RelatedI have one userform that loads combobox values upon userform Initialize. Though through a second userform changes can be made to anotherworkbook this workbook is saves any changes. when i close the second userform i need to rerun the 1st userform Initialize event to update the combobox's incase changes have been made.
View 5 Replies View RelatedI am looking for the most efficient was to update cells in the active row from the values of the selected item in a combo box(4 columns).
View 1 Replies View RelatedI need to create a drop-down (or a combo list) list based on a column in a separate worksheet (in the same workbook). The values in the column have many duplications, and I simply want the combo box to return a unique list.
After trying this using various options like drop-down boxes, combo boxes etc it does not seem to work. A drop-down box will return a complete list (including all of the duplicates). In addition the drop-down was linked to a cell and the value returned to the cell was a number based on the position in the list when what I actually wanted was the text. For example - my list in Worksheet 2:
PETS
Cat
Dog
Dog
Cat
Horse
Rabbit...
In Worksheet 1 if I choose 'Dog' from my Combo box (or drop-down) along with showing all of the duplicates it returns '3', instead of what I want 'Dog' and no duplicates.
I have a userform (uf_PaxInput) with a Combobox (cmb_flight_dest) which I am trying to populate from a worksheet range ("Dest") using the following code:
VB:
Sub LoadForm()
With uf_PaxInput.cmb_flight_dest
For Each Item In Range("Dest")
.AddItem
Next Item
End With
uf_PaxInput.Show
End Sub
The code seems to run okay however whent the form loads the combobox drops down to show only blank items to select. These blank items number them same number of items that are in my named range ("Dest").
I have a combobox whose list is filled with different ranges, on different sheets, selectable using option buttons. The code is shown below:
Private Sub OptionButton1_Click()
Dim ray
Dim Last
ray = Sheets("Trades").Range("B2:B500")
If OptionButton1 = True Then
With ComboBox1
.List = ray
.ListIndex = 0
End With
End If
End Sub
i have a range name (9 columns) and i filter for a certain type (Shrub) and i would like to only fill the combobox (on a form) with the filtered selection...?
myfilter = "Shrub"
Range("testmaterial").AutoFilter Field:=2, Criteria1:=myfilter
ComboBox1.RowSource = testmaterial
i have a list of surnames in column A in a spreadsheet i want to use this for the source of the combo box also i want this list to be unique and if the surname is not present i want to be able to put the name in the combo box and add it to the sheet
View 2 Replies View RelatedI have two questions.
1). I have dates listed in excel (01/01/2006 to 12/31/2006) say from range B12:B376.
How do I get these values to a ComboBox.
2). If the above is possible and if I select a value in ComboBox say 08/07/2006, it should get updated in a particular cell say A1
So selection of 08/07/2006 in ComboBox, should reflect 08/07/2006 in cell A1.
Note: This ComboBox is on the UserForm and not on the Excel Sheet.
I'm running in to some problems on creating a Userform. I will try to explain it as best as possible. Right now I have a userform set up with 2 ComboBoxes. Here is my current code. It's not near complete.
Private Sub CommandButton1_Click()
Set ufStart = Worksheets("Data"). Range("AP4")
Set valNames = Worksheets("MasterData").Range("AA6")
Set valMonths = Worksheets("MasterData").Range("H3")
Set SelMonth = ComboBox2.ListIndex
Set SelName = ComboBox1.ListIndex
If TextBox1.Value > 0 Then
ufStart.Offset(SelName, SelMonth).Value = TextBox1
Else: End If
End Sub
The way it's supposed to go, is if TextBox1.Value is greater then 0... then go to UfStart and Offset by Row, which is ComboBox1 Selection Index Value and by Column, which is ComboBox2 Selection Index Value. I can't get the sub to get past Set SelMonth = ComboBox2.ListIndex.
how can I build a userform to display all values from a row? in order to select a row, i was thinking to use a combobox to display values from one column and based on that selection, display all values in that row? the reason i want to use a userform is because i would also like to be able to edit that data.
View 3 Replies View RelatedSheets("Sheet1").Shapes("ComboBox1").Select
Selection.ListFillRange = "='Sheet1'!$b$15:" & comborange & ""
where comborange = cell reference of the last cell in my range..
I have moved this combo box to a userform now and I'm trying to populate the box via one of the userforms triggers.. My problem is I can't figure out the syntax to select the combobox on the userform.. it doesn't seem to be handled the same way as when it was on the worksheet..
I have a userform with 15 Combo boxes & I would like to make sure all the enabled combo boxes (some may be disabled) have a value > 0 (Zero) before exiting the userform.
View 5 Replies View RelatedI have a user form that with a textbox on that I want to use a search tool, then display the outcome on the user form. the worksheet has 3 columns in titled Name, Description,Contact number. What i want the form to do is when I place the comapny name in the text box on the form and press enter it will look though my table on the worksheet and display the Description and contact number on the form. I am not sure if I will need to place a frame or text box onto the form for this as of yet all i have is the textbox.
View 5 Replies View RelatedI am looking to fill out a combobox (say combobox1) in a userform from a set of ranges located in a different workbook (that is in a different location).
For example, the cells that would need to be in the combobox are B5:B41,D5:D40 and F5:F45 and the file location is W:WCWORKCENTERS.xls
I have 3 name range in a control sheet ("Control")
Namerange Cat1, Cat2, Cat3. All of the name range are different. I am trying to cut down on my Userform that have each a userform with combobox selection.
Frmcat1, frmcat2 frmcat3.
I need to simplify my life. I need that if the user selects anything between F5:F20 to generate the userform and select range Cat1. If the user Select G5:G20 then to generate Cat2 and so on...
So on userform Initialize look if the user is in Column F, is yes then Cat1. If user in Col. G then Cat2 and final if user is in Col H to have Cat3 generate in the combobox.
How can I fill a UserForm ComboBox or ListBox with cells from a dynamic changing range?
View 3 Replies View RelatedI have created a spreadsheet that is a roster to track mutliple crews and shifts.
I have a userform which is used to select a person on shift and assign them as being on either, Annual Leave, Personal Leave, Training.... on particular days.
I would like to have the shift combobox auto populate what shift the person is on based on the person and dates entered. All the information is there I just can't get the code to do this.
I was also thinking about blocks where the shift goes from DS to NS and if people are on leave over this time. I would need the combobox to know this also.
I have attached my workbook : New Annual Leave Spreadsheet.xlsm
Below is my current code. The strFind1 searches for a name within the database and then I need strFind2 to do a exact for a Subproject search and a partial search for everything containing the Subproject selected and other Subprojects. Currently, when the database entry in the worksheet includes Subproject 1 the search function works but when I have an entry that contains Subproject 1/Subproject 4 it does not find the entry. How can I expand the strFind2 to equal what is selected in the Combobox2 and find entries that have what is selected plus more text. I have set the line where I think everything is going wrong to a bold format.
[Code] .....
I'm trying to add a dynamic named range to a combo box in Userform but getting this error.
Have tried several lines of code this being the last that hasn't worked . . . .
Code:
CustCBx.RowSource = Range("CustList").Value
This is the formula for the named range in sheet
Code:
='Customer Info'!$J$2:INDEX('Customer Info'!$J2:$J200,COUNTA('Customer Info'!$J2:$J200))
Arised from my earlier posting in Populate ComboBox With Specific Sheet Column Range. I have the following working code below, but am having trouble finding coding examples to select specific cells from the selected row (that was found by selecting a ComboBox value)and update TextBoxes with those individual values after the UserForm has been initialized (the bold "GREEN" comment in the code below). I have been able to find plenty of references to update TextBox values to Cells, but that doesn't do me much good in this application since the User needs to verify the old data in these cells before updating them using the UserForm TextBoxes.
I was toying around with several different variations of code (none of which worked properly), so I left it out for clarity of my working code. I'll post up this non-working code as needed, because I really wanted a fresh answer...not what I was trying to do. The attached file should be sufficient to see what's going on
Private Sub UserForm_Initialize()
With Sheets("SR Information")
.Range("A2", .Cells(Rows.Count, "A").End(xlUp)).Name = "MyRange"
End With
SRnumber.RowSource = "MyRange"
End Sub
Private Sub SRnumber_Change()
Dim ServiceRequestNumber As String
Dim c As Range
Dim rngG As Range
Sheets("SR Information").Select
With Selection
ServiceRequestNumber = SRnumber.Value
For Each c In Intersect(ActiveSheet.UsedRange, Columns("a"))
If c = ServiceRequestNumber Then..................
I have a worksheet with following values:
A
B
C
1
Shorts
75
[Code]...
Also I have a Userform with 2 ComboBoxes named "ComboBox1" and "ComboBox2". Values in ComboBox1 is "Pull my pants", "Eat my shorts", "Socks for everyone".
What I would like to do is to search though column A and look for any of these textstrings in my selection in ComboBox1 and return the value from column B in column C.
Example: "Pull my pants" is selected in ComboBox1 then the value "pants" should be found in column A and value in column B (25) should be entered in cell C2.
I am fairly new to VBA and have spend hours searching Google and found some formulas like InStr and VLookup. My problem is that I am not sure if these statements will do the job and how to combine them.
Starting in cell J2 and down up to J9 - I need to preset the following values:
3
3
7
7
11
11
15
15
Tried a few times but no success. What am I missing ?
I am not even sure if my title matches my problem, but it was the best I could think of. Please take a look at the following code...
Sub Test()
Dim cell As Range
For Each cell In Range("F4", Range("F65536").End(xlUp))
cell.Offset(0, 3) = cell.Offset(0, 2)
Next cell
End Sub
I use similar codes quite a lot. The issue with this is that if I want to add columns or delete columns later on to my spreadsheet, I need to go and change all the previous codes so the columns match up.
My question is, how else can I write a code that has similar functions but with changing references in case I do add or delete columns? I understand that I can define ranges, but I am not sure how I can work with that within a macro.
I am almost sure there are different solutions to this problem, and I would appreciate and be interested in knowing all of them to put them in comparison.
I have a userform with a combobox that has three items to choose from: Blue, Red, and Yellow. When a user selects one of those options, I would like another combobox to appear on my userform with a specific list for that option.
View 2 Replies View Related