I request you to write a code for me to fill the cell values as "Not Applicable" in Column "AZ", if the "B" Column cell values = "Justified", "Approved LSAR" & "Approved SDAR".
I have attached the work book of what I am trying to accomplish.
What I have In Column B, I have the datesIn Column I, I have engineers name What I need I want a macro to generate Serial Nos. (1,2,3....... n) in column A If an only if the date in column B is today's date and the engineer's name matches with the PC's username
The following is my code
[Code] ....
Above code runs without errors but does nothing.
I have a listbox that has row and columns. The rows are combinations of options and the columns are Additives.
After selecting a row in Listbox1, (first column are names) i would like the value of the second column to goto a specific area.... find that value and in the cell to the right of it place a "Y". The "Y" would indicate that "yes" it was part of the selection row of the listbox. Same for third column, forth, fifth and sixth. The result from the listbox is a number of Y's and N's in the result page. Then making all that were not part of selected line and equal to "N" to hide row (height = to zero).
Listbox and expected result are in attached example worksheet.
The attached does show the need much better then I can explain it.
I need to write a condition in such a way that cell IF A1= "DBR","BPR","SLR","SKR" then change cell B1 to SPECIFIC COLOUR Each condition different colour. A1 values ("DBR","BPR","SLR","SKR") is a list of selectable values. if the condition is falls then B1 should be normal (white color cell) with 0 in it.
View 1 Replies View RelatedWhat I want to achieve: those cells have number 1 ( in column E) , adjacent cell values ( In Column D) are copied to G12 in the following format:: Mark,Lark ( i.e. cell value , cell value, etc)
is it possible ( with a command button) Sample attached
I have a large workbook with 2 rows of data I want to format (R25:R530, M25:M530). Row M is already populated, row R is new data that I am entering. When the value of a cell in row R is larger than its adjacent cell (R25:M25) in row M, I would like the font to turn red. When the value is smaller, I would like the font to turn green.
With the amount of time I've spent attempting to conditionally format, I could have gone through and formatted each cell individually by now!
Macro that could look at a row and take the values of two cells, combine them and then create a range name for a third cell in the row.
For example; for row 5420, in column C there is the word Florida, in column D there is the number 6235, and in column F there is a sentence or two. Is there a way to automatically create a named range for the cell of column F that would be named FLORIDA6235? And if so, can the macro do this for every row even if the word and/or the number changes.
I have roughly 28,000 rows and nine columns that I am working with. That's why I was wondering if there was a way to automate this. There are 10 states and I don't know how many different numbers attached to the states, however there are many state and number combinations that repeat, so there would be several rows with Florida in column C, 6235 in column D but a different description in column F.
I am looking for a way for Excel to fill in cells in a column that has data sporadically in it. I am importing a text file into excel and saving it as an Excel file.
In the example attached, I need the numbers filled in all the way down to the next number. I don't care about the text, just the numbers. I realize I can copy and paste, but these files can be several hundred rows long and it seems there should be a better way.
Here's an example of what i'm working with,...
Range is C40:D48
I'm trying to discover the best way to accomplish formatting a cell by filling it a certain color based on 2 of 3 criteria of other cells.
Column A has the title of the field. Cells B1:D1 have one of 3 values: Nothing/blank, Complete, or x. If all of the x's are gone within the range of B1:D1, I'd like to automatically format cell A1 to fill in Blue (or any color).
A1__________________B1_________________C1_____________D1
Generic Name______Complete_______________x_____________
If the 'x' in C1 is changed to the value of 'Complete', I'd like A1/Generic Name to be filled in with a color.
(refer to attached workbook)
For what I'd like to do, the attached workbook actually represents 2 or more workbooks. The 'Project-PO Report' tab is a sample of what will be several workbooks/reports that will be generated from the data in 'POTASK'.
The 'CMD_BUTTON' tab represents how I plan to use a command button " IMPORT DATA" to import the data into this workbook, then use "RUN PROJECT-PO-REPORT" to call the MACRO to achieve my objective,as stated below. (Originally,this workbook was about 8mb, so to get this under the size for attachment, I just copied the bare minimum of what I believe would be needed to assist me, and so there's no buttons or macros or dynamic name ranges, as there will be...)
Here's what I want to do: ...
I have a set of data in column R, with an unknown number of rows that looks like this
Days Late
-28
150
3
16
41
.
.
.
and I have written a script to add an adjacent column "S". I want to fill column S with conditional values based on the value of column R, sorted into categories such as "On Time", "Less than One Month Late", etc. Here is what I have so far, it doesn't work:
how I can change the color of an autoshape based on a value in a cell?
View 4 Replies View RelatedSee the attached excel table. I need the cell E4 to keep adding the values typed in the cell D4 on daily basis.The cumulative shouldn't be changed if there is no value in the cell D4. E4 should accumulate and keep the totals typed in D4...
Cumulative Input.xlsx
I have the names of companies in one column, and the amount they owe in cells in the column beside them. I then have a second list of companies that is a subset of the first. Is there a formula that would place the amount they owe in teh corresponding cell adjacent to the compny in the second list? I've attached a sample workbook, Full Company List in column A, amount owing in B, trimmed down list in D and ideally I'd like the corresponding values in E.
View 3 Replies View RelatedI have data in two columns
Column A has values with names like -
John, Paul, Hena, Kumar, Paul, Hena, John in different rows
Colum B has day values - eg , sun, mon, tue, wed , thu, fri and sat
I want to insert a new column C with formula that returns
1. for every John, concatenate of all the day values adjacent to row of John eg "sunmonfri"
Similarly for all the values in Column A, Column C should reflect the concatenate values of Column B.
it should compare and see if product, model for same id is the same but brand is different and the quantity of one or more of those brands=0 then the result (In column F)should combine the brands. check the attached image for more details.
View 5 Replies View Relatedi had data in html format.i want the data to be splitted into columns in excel.
HTML FORMAT
Employee name
Emp id
johnabraham wesley peter neiljohn and so on....... 254800 254801 254802 254803
i tried copying the data from html to excel. Then applied text to columns but i m getting incomplete names from this step.
My problem is how would i get the full name in one Column(Column B) & the emp id in the next Column (COLUMN C).Column A will have the data copied from html page. The length of the employee name differs. The only saving tip is that the employee name will suffix with sno like
Johnabraham -1
254800
I'm looking for a formula to sum three adjacent cell values in a specific row and then sum up all of the rows.
A B C
1 0 2
3 1 2
4 4 0
For example, the value for the above would return 17 = [(1+0+2)+(3+1+2)+(4+4+0)]
I would Like to define each row in a spreadsheet to the value of the first cell in each row and I have no idea how to go about this.
Code Customer
_0888 Williams
_0435 Smith
So basiclally I would like to name the first row "_0888" being 2:2. But without doing each row manually via Insert --> Names --> Define..
I have one sheet in my workbook called 'mapping' which has a list of codes on it, the length of which will vary on a periodic basis.
I have another fairly large sheet on the workbook called 'data' (around 2000 rows) that will also vary in size. I want to do a search on the data tab for each code that is contained on column 4 of the mapping tab and if the code is found, enters the corresponding value from column 1 of the mapping tab to the cell 6 columns to the left of where the code was found on the data tab (cols H and B in this case).
The issue I have is the codes maybe contained more than once on the data tab so I need the find/replace command to search the whole of the data tab and perform the task each time.
I have a list of data:
2
140
1
660
10
140
0.92
660
2
130
0.18
660
4
510
0.44
820
4
510
I want to have a formula that finds the sum of the values in Col 1 (Qty) for the rows that equal, eg: 140, in Col 2 (Product) So that I can have a list of Products of the Qty that relates to each product. (there are products in increments of 10 from 10 to 920, that is, 92 products)
I'm trying to create a drop down list which returns values based on what has been selected in the previous drop down list in the adjacent cell, e.g. if 'Apples' is selected in the previous cell then you should only be able to select from 'Gala, Granny Smith', or if 'Oranges' is selected you should only be able to select 'Seville, Blood Orange'. Is there a formula which would do this, or can I use a pivot table somehow? I'm totally stumped.
View 2 Replies View RelatedI want to build a database where the user can select a specific time period. I have a static file with the time periods and the related values. For instance I have in column A1:A15 the time periods from January 2011 to Dezember 2011, but I have some dates multiple times as there are more values attached to it. For instance I have in the first 4 rows January 2011...what I want is when someone puts in the value January 2011 in cell B1 and Dezember 2011 in cell B2 that the whole static file gets copied to another location (including the multiple dates) displaying the chosen time period. Similarly if someone puts in the value March 2011 to November 2011, I want only those values to be copied.
View 4 Replies View RelatedIn the picture below, I need a formula in column E to count the unique occurrences in column A (excluding blanks) if its corresponding value in column B (B1 value) matches that in column D (B2 value). Currently column E is showing the values I would want the formula to return.
Capture.PNG
At the moment I have a formula as below:
=SUMPRODUCT(--(B:B=$D2),--(A:A<>""))
this will do a countif in column A if column B matches the value in column D, but would not weed out duplicates for me.
Modifying my formula. I have attached the sample workbook below.
Book1.xlsx
I have a main workbook that is meant to summarize data from other workbooks
In Row 6 from column H on I have workbook names in each cell
Column G in all workbooks (including the main one) contains our branch #'s for our offices
For each workbook listed in row 6 , I need to open that workbook (I have that setup with the code below---notice there is an AX.xls that is appended to the file names listed in row 6 in order for the names to match what is in the windows directory)
In the newly opened workbook, I need to, for each value in column G, copy the value from adjacent cell in column H (the dollar value) then search column G of the main workbook for a matching branch and paste the value to the appropriate row under the workbook name column (remember workbook names are in row 6)
The trouble is, for each branch in column G in the newly opened workbook that cannot be found in the main workbook, I need to paste the new branch # at the bottom row of/in column G and the $ value (H column value from the newly opened workbook) to the corresponding row under the workbook name column
Sub OpenWBs()
Dim Rng As Range
Dim WB As Workbook
Dim MyPath As String
Dim lastCol As Integer
Dim newRange As Range
lastCol = Cells(6, Columns.Count).End(xlToLeft).Column
Set newRange = Range(Cells(6, 1), Cells(6, lastCol))
MyPath = "F:AccountingAPAdvertising AccountsLA TimesAgentExtractorCompletedLIST"
For Each Rng In newRange '
The first two columns in my document coincide with their respective values. Column A (File Number) is coded for Participant Description (Column B) and the values in each row are associated with one another...
However, I have a 3rd column (Article Number) whose values mean the same as the File Number column, but the the rows don't match up.
What I need is a fourth column. In this column I'd like the value from the Participant Description column to be imputed if the Article Number and File Number column are the same.
An example from the attached spread sheet.
A2 = 7, B2 = 6, C2 = 7 - I need D2 to equal B2
That is easy enough, but this is where I get lost...
A2 = 7, B2 = 6, C3 = 7 - I need D2 to equal B2
I am looking for the most efficient was to update cells in the active row from the values of the selected item in a combo box(4 columns).
View 1 Replies View RelatedI'm attempting to assign 1 of 4 predetermined values to a cell based on the values of entries in another cell.
View the example attached : Value assignmts.xls
Assign the Value of 1, to (D8) when any value entered in (C9) is equal to or over 380, but less than 410.
Assign the Value of 2, to (D8) when any value entered in (C9) is equal to or over 410, but less than 440.
Assign the Value of 3, to (D8) when any value entered in (C9) is equal to or over 440, but less than 470.
Assign the Value of 0, to (D8) when any value entered in (C9) less than 380.
I have a table of times which shows how long it took someone to process a form. If this value is longer than 10 minutes the cell next to the duration time contains the value 'Break Over Ten'. This is only true when the time is outside of 12:00 to 14:00. If the break is within this time period it shows 'Lunch'.
Is it possible to sum all of the time values that are over flagged as 'Break Over Ten'? This is how it looks
Event Date Start Time End Time Duration Breaks Duration Of Break
19/12/201308:43 08:43 00:00:35 00:00
19/12/201308:43 08:44 00:01:03 00:01
19/12/201309:05 09:19 00:13:15 BREAK OVER TEN00:13
19/12/201309:05 09:19 00:13:15 BREAK OVER TEN00:13
I was thinking of using SUMIF but can't work out how to total the values in the duration of break column when the cell to the left reads break over ten. Is it possible to do this?