Fill UserForm TextBoxes With Relative Details Of Found Value
Feb 25, 2008
I am having a bit of a battle with an update process that I am trying to run. Essentially I want to be able to select a range of data and update certain fields from a userform to a worksheet. The data is loaded into the userform successfully, however selection of data is a problem. I don't seem able to do it with FIND - all it does is fin the data, but the actual range is not selected for updating purposes.
Take a look at my code - I have not included the FIND process because that is where the problem is and I have nothing to show at this point. I have used some code that I found in the forum and modified it for my purposes and but for the range selection it works.
Private Sub UpdateContact()
Dim strAnswer, strFindIt As String
Dim sUpdateMe As Range
tbxWrkTel.Text = Format(tbxWrkTel, "000 000 0000")
tbxMobile.Text = Format(tbxMobile, "000 000 0000")
tbxHomeTel.Text = Format(tbxHomeTel, "000 000 0000")
If Not WorksheetFunction.CountIf(Sheet1.Columns(1), tbxCompany) > 0 Then 'To avoid duplicate data
If tbxCompany = "" Then tbxCompany = "-"
If tbxContact = "" Then tbxContact = "-"
If tbxWrkTel = "" Then tbxWrkTel = "-" .........
I've been trying for hours to populate a textbox on a userform based on a combo box. I'm including a zip of my workbook to see. (don't laugh to hard at my code, like I said I'm green...:) When you select a mix design in my form I want the next six combo boxes to populate. The way I have it now is based on one of the many examples found here, (none of which have worked for me so far, but this one said "the simplest way to do this is......") And I get an error 425 - "Object not found". I've done searches based on the error but haven't found an answer.
I have a form using in Excel 2003 that's 5 columns and 20 rows I need to populate the Textboxes with values from a worksheet. I want to use a loop statment that fills the first row, then increments to the next row until all 20 are filled. I have named each row the same name except the last character is the row number 1-20.
Sub test() Dim RowNumber As Integer Dim FormRow As Integer Dim NameRow As Object Dim AddressRow As Object Dim CityRow As Object Dim StateRow As Object Dim ZipRow As Object RowNumber = 3 'Row in Data sheet FormRow = 1 'Row on form NameRowString = "NameRow" 'first part of the named object Do While FormRow < 21 NameRowVar = NameRowString & FormRow................
I have a user form that with a textbox on that I want to use a search tool, then display the outcome on the user form. the worksheet has 3 columns in titled Name, Description,Contact number. What i want the form to do is when I place the comapny name in the text box on the form and press enter it will look though my table on the worksheet and display the Description and contact number on the form. I am not sure if I will need to place a frame or text box onto the form for this as of yet all i have is the textbox.
I've got a VBA userform with 5 text boxes. When a user selects the cell the userform shows and I want the text boxes to fill each text box from a string in the cell which has a "-" as a seperator.
E.g say the string was "Item 1 - Item 2 - Item 3 - Item 4 - Item 5"
Userform1 Textbox1 would equal the string Item 1 Userform1 Textbox2 would equal the string Item 2 etc
The below works but wondered.
1) Is there a better way to do this. 2) How to count the number of "-" with using the Evaluate Method and a sumproduct formula which I'm doing at the moment
Arised from my earlier posting in Populate ComboBox With Specific Sheet Column Range. I have the following working code below, but am having trouble finding coding examples to select specific cells from the selected row (that was found by selecting a ComboBox value)and update TextBoxes with those individual values after the UserForm has been initialized (the bold "GREEN" comment in the code below). I have been able to find plenty of references to update TextBox values to Cells, but that doesn't do me much good in this application since the User needs to verify the old data in these cells before updating them using the UserForm TextBoxes.
I was toying around with several different variations of code (none of which worked properly), so I left it out for clarity of my working code. I'll post up this non-working code as needed, because I really wanted a fresh answer...not what I was trying to do. The attached file should be sufficient to see what's going on
Private Sub UserForm_Initialize() With Sheets("SR Information") .Range("A2", .Cells(Rows.Count, "A").End(xlUp)).Name = "MyRange" End With SRnumber.RowSource = "MyRange" End Sub
Private Sub SRnumber_Change() Dim ServiceRequestNumber As String Dim c As Range Dim rngG As Range Sheets("SR Information").Select With Selection ServiceRequestNumber = SRnumber.Value For Each c In Intersect(ActiveSheet.UsedRange, Columns("a")) If c = ServiceRequestNumber Then..................
I am taking a range of cells (C22:D67) on several sheets ( same cells on each sheet) 4 sheets in total, each range appears in it's own text box on the single user form.
- I would like to know if there is an easier way of doing this, and can I leave out the cells without anything in them?
I am trying to create a form with a text box that when text is entered, it adds to the userform another textbox with that data in it. The focus then goes back to the original textbox so that more may be added indefinitely, all with relative position to the most recently added textbox. Here is what I have so far, works for one time, but not multiple textboxes. The original textbox is "txtAPID"
Private Sub MakeNewTextBox() Dim newTextBox As TextBox Dim ControlTop As Long With LastAirport ControlTop = 30 End With Set newTextBox = Me.Controls.Add("Forms.TextBox.1", "txtNextAirport", True) With newTextBox .Left = 20 .Top = ControlTop + 3 .Height = 15 .Text = txtAPID.Text End With....................
I want to find the subtotal amount on one worksheet, which is two columns over from the text, "Sub Total:" on the same row. The subtotal line floats up and down each week. Once I can find the subtotal I want to populate another worksheet with the data.
I want to set range a entire column,the rows are dynamic and i want to do it on all the columns in the sheet, my problem is that after i set the range(i hope i did good) i want to do a average of the range and to put the result in a new sheet on a row. I'm sorry for the mess in the code its one of my first macros
Option Explicit Sub Average() Dim R As Integer Dim help As String Dim Range1 As Range Dim E As Integer Dim Avg As Integer R = 1 '/////CREATE NEW SHEET AND COPY THE FIRST TWO ROWS TO THE NEW ONE Sheets("UXP data").Select 'Sheets.Add Sheets("UXP data").Select......................
I want to enter a value in a textbox, search for it in an worksheet, and populate other textboxes with adjacent values if the value is found. Anyway, the problem is that if the value is not found, I get a debug error.
I'm sure there's far better code to do what I need, but I tried to keep it simple. With the above code, it only works if the value is found. If it's not, I get an error. So how do I make it so that if the value is not found, the value of the textbox2 is "Not Found" or something...
I have aworkbook with Employee details data sheet. And, I have built two userforms to search and view the employee’s full details. I don’t know how to link the rowsource for combobox and textbox.
I have attached the excel file of what I'm trying to accomplish.
I have an excel sheet where i have the part number in the Column "A". I have four sets of four columns each which has the details of price for that particular part, currency , lead time and the Vendor Name. Now i want to have an user form where in i can put in the details of a part number and i should get the details of the best vendor in terms of price and lead time Seperately. The best vendor in terms of price is determined by comparing the values in the columns B, F, J & N and The best vendor in terms of leadtime is determined by comparing the values in the columns D, H, L & P. I have also created an user form with out any code just to give you an idea of what i am looking at. So that it can be helpful to you. I just key in the part code and i get the best results for the same.
I'm trying to use relative references and am have having trouble with selecting a range for the fill down command.
I'd like to copy a formula down in the last column from row 1 to the last row with data. Column D is static so I can always use it to find the last row. The last column will vary; sometimes it might be G another time it might be X. I'm able to get the formula entered into the proper cell but I can't figure out how to select the range for a fill down.
If I was not using relative references and cell X1 always had the formula then Id code it like this:
'*** Find last row with data Range("D1").Select LastRow = Range("D65536").End(xlUp).Row '*** Calculate length of cell in previous column
[Code]....
It's the last range statement that stops me. I haven't come up with a variation that allows me to select a range from the cell on the first row of the last column and select the last row with data for the same column.
I want my column to be populated by formula using VBA. Let's say on row1, the formula is = SUMIF(mysheet!$L:$L,$A1&C$1&"09",mysheet!$M:$M). And on row 2, the formula is =SUMIF(mysheet!$L:$L,$A2&C$1&"09",mysheet!$M:$M). And on row 3, the formula is =SUMIF(mysheet!$L:$L,$A3&C$1&"09",mysheet!$M:$M). And this is done up to the last row. How do I do this?
On the attached spreadsheet, ormula on 'UserForm2'.
When I hit the 'Submit Changes' button I want a formula so that it will look up the product row in Product List (Sheet 1) that is select in the ComboBox1.
Once this row has been found I want the values in TextBox1 to be copy and pasted into Column D of that row and value of TextBox2 to be copy and pasted into Column G of that products row.
I've got a workbook (attached) with a UserForm that summarizes transactions entered in columns A and B based on the entry (color) in column A. If you click on the Button (Summary (Show/Hide)) it brings up the UserForm.
A couple of issues I've struggled with: 1. I'd like the UserForm to open when the workbook opens. 2. I'd like the UserForm to update as entries are made in Columns A and B when the user tabs out of column B 3. I'd like the UserForm to always stay open; the user cannot close it.
I've got the same data in cells G26:M34 but these cells don't "float" as the page moves down. This is the reason I've gone to a UserForm to accumulate the data.
I was just wondering if there is a more efficient method. I have a UserForm that requies textboxes to be filled. I have a commandbutton1 on the form called "next" which is only enabled after all the fields have been filled. If any field is blank, I want the commandbutton "next" to be disabled. I have many UserForms so I wanted to see if there is another way than my own primitive method - I have a code for the change event of each textbox
Private Sub TextBox1_Change() If Me.TextBox1 = "" Or Me.TextBox2 = "" Then Me.CommandButton1.Enabled = False Else Me.CommandButton1.Enabled = True End If End Sub
Private Sub TextBox2_Change() If Me.TextBox2 = "" Or Me.TextBox1 = "" Then Me.CommandButton1.Enabled = False Else Me.CommandButton1.Enabled = True End If End Sub
Private Sub UserForm_activate() Me.CommandButton1.Enabled = False End Sub
I am working on creating a userform to make sure that information gets entered correctly into a spreadsheet. This is a rather large user form with numerous text and list boxes on a number of tabs. I also have a toggle box at the top of the form that helps choose what sort of data I will be needing. When the toggle box is selected I only need about half as much information and do not want users to be able to enter the rest. I am looking to enter code that changes the enabled property of the unneeded boxes to false when the toggle button is selected and back to true when it is clicked off. Unfortunately, this involves about 50 text/list boxes. Things are going to get very messy if I need to write out a seperate line for each of these items.
My question is this. I know there is a way to group these boxes and change the properties of the group as a whole in the editor, but is there a way to refer to such groups and their properties in my code.
Here is my case: I have made a userform called "frmvakanties" this form contains a certain amount of textfields in wich the user should be able to put dates (d-mm-yyyy) the userform also contains a OK button, wich is called cmdOK. in the the Private sub cmdOK_click it says:
Dim txtNwJrvan as date unload me So far no problem. For this question i just take one of the textboxes, wich is called 'txtnwjrvan'
Now have my vb module. I wrote there: 'frmvakanties.Show'
When i run this program, I get the userform with the unfilled textboxes, fill them with a date and press OK.
this is where my problem is: after frmvakanties.show i've typed msgbox (frmvakanties.txtNwJrvan)
I do get a msgbox, but it is empty!
I just made this msgbox to check what date it returns, since i need the entered date for further use in my script.
I have a bunch of TextBoxes on a UserForm, and I would like to create a Sub to clear all of them. Something like that:
For I = 1 To 10 NameBox = "TextBox_Area" & I For Each objControl In UserForm1.MultiPage_1.Pages(1).Controls If TypeOf objControl Is MSForms.TextBox And objControl. Name = NameBox Then objControl.Text = "" End If Next objControl Next I
But of course there is no Text method for Controls. And I cannot loop directly through TextBoxes instead of Controls. So what can I do ?
I am looking for codes to clear the textbox fields while the existing codes transfer the information to the execel page. I have programmed it to transfer the data to the sheet but I can't write the codes to clear the textboxes for the next entry.
I want to program the same command button to transfer the data to the sheet and clear the textboxes simultaneously.
I have a userform that has 3 sections. In each section are a number of text boxes which, following input of a value in the first text box in the section (master box), self populate with data from a spreadsheet.
This works apart from when I change the value of one of the first text boxes. Is there a simple bit of code that if on the change of the value in the master box will reset the 'dependent' text boxes to empty?
I have a Userform and 2 text boxes that require users to enter a date. I really need the users to be forced to enter the date in "mm/dd/yy" format or they cannot get passed that text box or at least an error comes up.
I am trying to get two text boxes on a userform to populate a third box on the form when the user inputs the data in both of the first two boxes. I am pretty sure i need to use a change event, but I am not sure how or what triggers them. so I have:
[Code] ....
but they don't work when I put data in VSShortPrem and VSLongPrem textboxes. Do I need to call them to the userform module?
When the user choose a customer from a combo box then i need to get some statistical results in the text boxes, such as last amount of credit-charge, last date, and amount that he has to pay us until now.
When user adds a new amount in the grey textbox then this has to be added in the previous amount.
I have the expected results of my example in my sample sheet.
I have a userform that one textbox takes it's value from a cell in sheet3.(k2). The format of this cell is currency. How the textbox takes the same format as the cell?
In the same userform i have a series(prcase1,prcase2..) of textboxes that i want to have currency format as the user type numbers on these.
