On the attached spreadsheet, ormula on 'UserForm2'.
When I hit the 'Submit Changes' button I want a formula so that it will look up the product row in Product List (Sheet 1) that is select in the ComboBox1.
Once this row has been found I want the values in TextBox1 to be copy and pasted into Column D of that row and value of TextBox2 to be copy and pasted into Column G of that products row.
I have some experience with excel, but until now have not ventured into VBA and macros.
I have a workbook which will have the following sheets:
1.Absence Summary sheet - Summarises data from each employee's individual sheet.
2. Template Sheet - A sheet formatted as an absence record sheet, but without data.
3. Individual employee Absence record sheets - Based on the Template sheet.
I have read with interest the various posts and help files on User Forms & Macros, but have got a bit stuck.
My Aim: ....
I have aworkbook with Employee details data sheet. And, I have built two userforms to search and view the employee’s full details. I don’t know how to link the rowsource for combobox and textbox.
I have attached the excel file of what I'm trying to accomplish.
Book2.xlsm
I have an excel sheet where i have the part number in the Column "A". I have four sets of four columns each which has the details of price for that particular part, currency , lead time and the Vendor Name. Now i want to have an user form where in i can put in the details of a part number and i should get the details of the best vendor in terms of price and lead time Seperately. The best vendor in terms of price is determined by comparing the values in the columns B, F, J & N and The best vendor in terms of leadtime is determined by comparing the values in the columns D, H, L & P. I have also created an user form with out any code just to give you an idea of what i am looking at. So that it can be helpful to you. I just key in the part code and i get the best results for the same.
View 6 Replies View RelatedI am having a bit of a battle with an update process that I am trying to run. Essentially I want to be able to select a range of data and update certain fields from a userform to a worksheet. The data is loaded into the userform successfully, however selection of data is a problem. I don't seem able to do it with FIND - all it does is fin the data, but the actual range is not selected for updating purposes.
Take a look at my code - I have not included the FIND process because that is where the problem is and I have nothing to show at this point. I have used some code that I found in the forum and modified it for my purposes and but for the range selection it works.
Private Sub UpdateContact()
Dim strAnswer, strFindIt As String
Dim sUpdateMe As Range
tbxWrkTel.Text = Format(tbxWrkTel, "000 000 0000")
tbxMobile.Text = Format(tbxMobile, "000 000 0000")
tbxHomeTel.Text = Format(tbxHomeTel, "000 000 0000")
If Not WorksheetFunction.CountIf(Sheet1.Columns(1), tbxCompany) > 0 Then 'To avoid duplicate data
If tbxCompany = "" Then tbxCompany = "-"
If tbxContact = "" Then tbxContact = "-"
If tbxWrkTel = "" Then tbxWrkTel = "-" .........
Excel 2007.
I have a workbook with a sheet per day, each sheet has a variety of 'jobs' as columns and a variety of people and kit as rows. Hours are manually input each day during the month.
Simplified version... These are two separate sheets 'M060114' and 'Tu070114'.
Monday
Dig
Drive
Dave
4
5
Bill
2
7
Tuesday
Dig
Drive
Dave
2
7
Bill
8
1
I have a Pivot Table on a separate sheet. This was created using the Wizard (ALT +D +P).
Dig
Drive
Dave
6
12
Bill
10
8
So far, lovely.
But when I double-click on a number or right-click and choose 'Show Details' I don't get the sheet names in the newly created information sheet. I get the Row label, column label and a list of the entries.
So if I clicked on 10 above...
Row
Column
Value
Bill
Dig
2
Bill
Dig
8
That's fine with just a couple of entries but with about 80 columns and 250 rows spread across a month, therefore 30ish sheets, it's difficult marrying up the 'Show Details' sheet to the actual data.
So after all that, the question. Is there a way of getting the sheet name to appear in the 'Show Details' information sheet?
I've got a userform for entering data in a workbook with sheets for each month. ie: Jan'06 , Feb'06, etc. I've added a combobox that looks at my list of these sheets and when a certain month is chosen I would like that months sheet to come up behind the userform, so that the data is entered there when the form is completed.
The other option is to not change the sheet focus but to direct the data to the appropriate sheet based on the combo box. (No matter what sheet is currently selected)
On a related note, I have a text box showing the last date entered and I would like to make shure that it is updated based on the sheet selected in the combobox.
I have a query on array formula
Am using this formula to get the details from master sheet to template sheet
=IFERROR(INDEX('P O Detail'!$D:$D, SMALL(IF('P O Template'!$C$4='P O Detail'!$B:$B, ROW('P O Detail'!$A:$A)-ROW('P O Detail'!$A$2)+2), ROW(1:1))),"")
with Ctrl+Shift+Enter
This is working fine based on the input cell $C$4
What am looking for is ... how to add two more input data $D$4 & $E$4 so that based on these three values I should get the required output.
I am trying to transfer information for the 'Master CCO CCB Document List' tab into one of the other tabs ('In Progress' and 'Complete') based off of the status. If the status is Complete, Approved, Declined will transfer to the 'Complete (Approved or Declined)' Tab. If the status says 'On Hold, Pending, 1st & 2nd Session Review needed will transfer to the 'In Progress (On Hold-Pending)' Tab.
I want the master list to house all of the entries, so when the status changes it is just copied to the other sheet and not cut and pasted.
On the 'In Progress' tab, once the status changes to Complete, Approved or Declined I would like for the item to be cut and pasted into the 'Complete' tab,
I'm stumped and really not sure if this will work properly. I've tried everything and now I can''t figure out how to add the contents from the form to the master list tab.
I create daily report for dispatch documents to our various branches. Now I am looking for formula (or formula is not possible then VBA code) that will auto update document number and dispatch date in "output" sheet.
Find attached sheet with desired output.
I have a workbook which I use for invoicing customers. Sheet one is the inovice template. Sheet two is the contact details of all my clients (i.e. column headings are Name, Address 1, Address 2, Town/City etc.).
In the invoice sheet I would like to be able to select the name of the client from a dropdown so that it automatically fills in the address into the other cells of the invoice.
My worksheet is attached. It asks the name whenever we will open this workbook. The same would be written autometically in open by cell with date & time.Then it ask "whether its new project or not"? If yes then then approved by cell & date-time would be blanks or if no then it will show the last approver's name, date & time. I need whenever anyone approve this in case of NOT NEW Project so the name of the approver & Date & time should be recorded in the another sheet name "record" along with the sr. nos. But the record will be blank whenever we will select "yes" in "whether its a new project". I want to make it password protected & password is "007".
I have in Sheet 1, in column A, the list of employees who are existing, in column B their mobile numbers and in column C the amount of mobile usage for the month June 2007.
In Sheet 2, in Column A, I have the existing list of employees of June 2007, some new employees who have joined, in Column B their mobile nos. and in Column C, amount for July 2007.
Similarly, for August, Sept. Oct. 2007 etc. In each sheet, the old employees are copied and new ones are added alongwith their details. It so happens, some employees leave the organization in between in August, Sept. or Oct. 2007.
Now, I want to extract in column A, the list of all the employees who were existing initially in June 2007, who have joined later on and who have left in between, their corresponding mobile numbers in column B and their amount in column C and show them monthwise in one single sheet side by side. E.g....
I have a work sheet(sheet1) that contains 700 people's information. Each row contains information for one person. Let's call the first person A. I have to copy certain columns of person A's response to another work sheet(sheet3) in the same file. Then, copy person A's e-mail address and save the sheet as person A's e-mail. Repeat the same steps for the next respondent.
I have created the macro for person A already (including the saving part). Now the question is how to write the loop in the macro.
Sub Macro1()
'
' Macro1 Macro
' Macro recorded 7/5/2007 by Jean Kuo
'
'
Range("Q4").Select
ActiveCell.FormulaR1C1 = "=Sheet1!R[-2]C[-4]"
Range("Q13").Select
ActiveCell.FormulaR1C1 = "=Sheet2!R[-9]C[-14]"
Range("Q14").Select
Sheets("Sheet2").Select
Range("D4").Select
Sheets("Sheet3").Select
Range("Q14").Select
Sheets("Sheet2").Select
Range("D4").Select
ActiveCell.FormulaR1C1 = ""
Range("C4").Select
Selection.Copy
Range("D4").Select
ActiveSheet.Paste
Application.CutCopyMode = False
ActiveCell.FormulaR1C1 = "=Sheet1!R[-2]C17"
Range("C4").Select
Sheets("Sheet1").Select
Range("T1").Select
Sheets("Sheet3").Select
ActiveCell.FormulaR1C1 = "=Sheet2!R[-10]C[-13]"
Range("Q15").Select
ActiveCell.FormulaR1C1 = "=Sheet2!R[-11]C[-12]"
Range("Q16").Select
ActiveCell.FormulaR1C1 = "=Sheet2!R[-12]C[-11]"
Range("Q17").Select
Sheets("Sheet2").Select
Range("F4").Select
Sheets("Sheet2").Select
Range("G5").Select
Sheets("Sheet3").Select
Range("Q17").Select
ActiveCell.FormulaR1C1 = "=Sheet2!R[-13]C[-10]"
Range("Q22").Select
ActiveCell.FormulaR1C1 = "=Sheet1!R[-20]C[42]"
Range("Q22").Select
Selection.Copy ...
Is there a way to write a Worksheet_SelectionChange (ByVal Target As Range) event in module after creating a sheet in VBA? I constantly delete a sheet, then repopulate it with a new one that is empty, but I need to add some code that happens if they should change a particular cell. It worked when I ran it on a worksheet without refreshing, but as soon as I cleared and repopulated the sheet, it was gone. Is there a way to preserve this?
View 9 Replies View RelatedI was interested in getting Excel to look up details of a person say age and put the details in another table under the correct heading.
E.g. Fred Bloggs age 25
Would look like this
First Name Surname 16-24 25 - 49
Fred Bloggs 0 Tick or something
I need a formula that will update A1 to what ever the sheet name is. Is that possible? It sounds so simple but I can't seem to find anything so far.
View 5 Replies View RelatedSuppose I have 100 worksheets in a workbook ( named 1,2 3 ........100) in a collecteve sheet ( I have a coulmn of 100 same formulas refering to the same cell in all the 100 worksheets)
for example :
'1'!$a$1
'2'!$a$1
if I drag the first formula Fill Down With Fill Handle then, the sheet name will be the same all the way down(1) , which is not correct , so I have to go bach and modify them manually , which is very boring and mistakes could easily happen
I can't use code for this problem as I need to give this to someone who doesn't know VBA. They will need to use it in several different reports, so I can't produce something in VBA very easily. I have three worksheets, Summary, Year1 and Year2.
I want to display either Year1 or Year2 data in the Summary sheet depending on what the user enters in a cell in the Summary sheet. For example, if the user enters "Year1" in cell E2 then I want to point to a cell in the Year1 spreadsheet.
I tried using formula: =E2 & "!B3" but this doesn't work. Is there another solution? I have attached an example.
I have an excel workbook that has many spreadsheets (each one sheet has a client name)I have another excel workbook that has these client names on one sheet (on a list) and next to every name I have a number (i.e total turnover of the year).
In the first workbook (where every client has his sheet (tab named after the client) I want to have a cell that equals to the sum of some cells on the other workbook, that refer to the specific client
(it looks like this ='[comissions NF 10-14.xls]comissions 14(auto)'!$J$81+'[comissions NF 10-14.xls]comissions 14(auto)'!$J$197+'[comissions NF 10-14.xls]comissions 14(auto)'!$J$313+'[comissions NF 10-14.xls]comissions 14(auto)'!$J$429)
I want this sum to be added to every sheet of this workbook. each sheet refers to a client, so $J$81, $J$197 etc must be changed for the correct cell that refers to the name of the client. The tab names are alphabetical and so s the list.
Is there any way to do it, without re-entering the formula to each one?
On a worksheet i have a list of names in Column A the list length can vary this is why i want to create a userform using VBA. The form just wants a checkbox with name next to it for each name in column A. If the checkbox is ticked I want a 'Y' in Column B next to the corresponding name.
View 4 Replies View RelatedI have two sheets, one is named "details" and other is "query". The data in sheet "details" is listed in columns A, B,C, then D is blank and again data is in columns E,F.G. (in text forms)
In the Query Sheet, wish to enter in A1 the value contained in A, B or E, F of "details" sheet, the result of columns C or G may appear in Column B1 of Query sheet and also if value is equal to C or G, the result of A,B, or E,F may appear:
=IF(AI=A1& B1,E1,F1!Details, etc. etc.
I'm working on a order spreadsheet system, and I have one sheet called Product Details, where the product name, list price and product code are found, these link to the Sales order page, and I need them so that they can be added to.
So far, I have created a dynamic named range for the Product name on the Product details sheet, and linked the the range via a list validation on the Sales order sheet.
The drop down list displays the products and can be added to by typing new product names on the other sheet.
What I need now is that when a product on the sales order page is selected, it draws the the list price and product code data automatically from the sheet, I tried using a normal vlookup, but I couldn't get it to work. I also need the list price and product code columns to be 'dynamic' so new values can be added further along.
need to do to the below code so that when i drag the formula down it changes the sheet number....sheet1, sheet2, sheet3 and so on but keeps the cell reference the same?
View 4 Replies View RelatedI'm trying to do: Let's say I have a simple userform with labels as follows:
(Label1) John's birthday: (Label2) 12.10.1974
(Label3) Mary's birthday: (Label4) 15.03.1978
(Button1) Change Birthdays
Let's say want to change the birthdays I see, so I press the button and enter the new values through another userform with inputboxes.
How do I make that change permanent, so that next time I start the macro in the labels 2 and 4 I have the last entered values for the birthdays???
[URL]
Basically I’m trying to create a login userform that launches once the database opens.
Userform = LoginTextbox = UserformTextbox = PasswordCommand Button = UserloginCommand Button = UsercloseSheet containing passwords = Userpasswords
Usernames are stored vertically in the A column, and Passwords vertically on the B column both starting from row 1.
I’ve been using code found at [URL] but I’m struggling to make it work. Some of the variables listed below may be useless but I’m not entirely sure so I’m sceptical about removing them. !
VB:
Option Explicit
Dim ws As Worksheet
Dim Userpasswords As Worksheet
[Code]....
I am a novice VBA user, with a more-than-basic knowledge.
I have created several userforms in the past, but they were all “static”, meaning, the user was allowed certain options from a variety of combo boxes, and after filling all the data, the result was migrated into a sheet (database).
Now, I am trying to create an INTERACTIVE userform in which certain combo boxes will become available based on a user’s selection in a previous combo in the same form.
For example:
If - in a “Payment” combo - the user will select “Check”, 3 new text boxes will appear (Date, Sum, Bank code) and the user will fill certain data related to his selection.
If, on the other hand, the user will select (in the “Payment” box) the option “Installments”, 3 other boxes will appear (Number of installments, first installment month, sum per installment). These boxes can either be text boxes of combo boxes, and here the user will select/fill the relevant data.
Naturally, the previous boxes, related to the “Check” option, will be made invisible.
Personally, I don’t care if ALL boxes are always visible, as long as they are activated or disabled (grayed out) based on user’s selection in the “Payment” combo.
The next step will be to migrate the selected/filled data from the form back into a sheet, where the data will be placed in different columns based on the final selection the user made in the form.
I am a total noob when it comes to userforms. I want to create a userform with a simple combobox that contains 4 different selections. Along with this combobox will be a Submit button and a Cancel button.
View 6 Replies View RelatedI have created a UserForm with 10 text boxes. 9 are input fields and the 10th is a large comments box. I have designed the form so that entry's can be added, searched for and updated. However, I would like all previous data to be stored as history in the 10th text box.
View 5 Replies View RelatedI just need to make a user form for entering data in one of the sheets ( Pending Confirmed Orders ), requested user form should be used to enter the orders information in columns ( each column in new entry ) and just the rows ( from 6 - 21 ) with noting that row no 16 is to link external pdf file as you will see.
File : [URL] ........