Enter A Value In A Textbox, Search For It In An Worksheet, And Populate Other Textboxes With Adjacent Values If The Value Is Found
Jul 14, 2007
I want to enter a value in a textbox, search for it in an worksheet, and populate other textboxes with adjacent values if the value is found. Anyway, the problem is that if the value is not found, I get a debug error.
Dim test1
test1 = TextBox1.Value
Worksheets("data1").Activate
Find_Range(test1, Cells, xlFormulas, xlWhole).Select
TextBox2 = ActiveCell.Value
TextBox3 = ActiveCell.Offset(0, 1).Value
I'm sure there's far better code to do what I need, but I tried to keep it simple. With the above code, it only works if the value is found. If it's not, I get an error. So how do I make it so that if the value is not found, the value of the textbox2 is "Not Found" or something...
View 3 Replies
ADVERTISEMENT
Jul 19, 2006
When i press say a command button " Add Repair Information" i want the User to Enter the serial number which i have given it a range called SerialN from the excel sheet and enter a repair action. Is there a function in Excel which will allow me to search the Serial Number and allow me to put the Repair action across in the cell on the same line?
View 5 Replies
View Related
Dec 23, 2013
I have a workbook with 4 worksheet that store different type of data. It also has a userform that load at start of the application which is to search the data in the workbook. The userform has a combobox where the names of the sheets are stored. when the user selects say Sheet2 in the combobox, it enables the relevant textboxes on the userform and activates the worksheet at the change event. The userform has a search button that searches all the worksheets based on the text entered in a textbox.
The problem: how to search based on 1 textbox. What I want is: say for e.g the end-user selects sheet2 from the combobox, this intern enables 4 textboxes (Name, DOB, Nationality, ID #) on the userform. The end-user should have the liberty to enter data in 1 and/or any of the textboxes. The search should be performed, that if data is only in 1 of any of textboxes then give all rows that fit that criteria and display in a temp worksheet. if say the name and dob is filled by the user than what matches both should be displayed in a temp worksheet. if say dob, name and ID# given so the search button should narrow down to fit all 3 criteria and then display result in temp worksheet. As if mentioned data can be entered in either just 1 or any or all textboxes.
E.g. the worksheet is (Columns are Name, Nationality, DOB, ID#)
row 1 = name: Steven Martin, DOB: 27-may-1993, Nationality: Trinidad & Tobago, ID #: 1234567
row 2 = name: Gary Richards, DOB: 2-FEB-1993, Nationality: British, ID #: 456789
row 3 = name: David Cohen, DOB: 27-May 1993, Nationality: American, ID #: 98765
row 4 = name: Roberto McDonalds, DOB 21-Jul-1962, Nationality: British, ID # 654321
row 5= name: Gary Richards, DOB: 01-Dec-1978, Nationality: Australian, ID # 1234567
Now if the user enters only name as "Gary Richards" and search then row 2 and 5 should be displayed in a temp worksheet. if user enters name Roberto McDonald and ID# 1234567 then it should not display anything. if user enters DOB 27-may-1993 and nationality British and ID # 1234567 then as well shouldn't display anything and should a msgbox "no data found".
View 4 Replies
View Related
Nov 22, 2012
I have a userform containing 3 textboxes, to calculate derivatives.
User enters two integers in textbox1 and textbox2; and to textbox 3, I need to transfer these values but with a little issue.
For example, user entered 3 to textbox1 and 5 to textbox2. In textbox 3, it needs to show 3x^5.
For example, user entered 7 to textbox1 and 2 to textbox2. In textbox 3, it needs to show 7x^2.
So "x" and "^" are our defaults in textbox3.I tried to transfer the numbers that the user enters to cells A1 and A2, -I don't know if this works- but I don't know how to call them to change the text in the textbox.
View 2 Replies
View Related
Jul 30, 2008
Is it possible to write some VBA code that will copy IDs from Sheet1 and then find these IDs in Sheet2 and return the values these IDs have?
View 4 Replies
View Related
May 12, 2014
it is possible to join the values from two seperate text boxes into the same text box on the same userform?
View 1 Replies
View Related
Jan 30, 2014
I'm trying to create a macro that can lookup values down a list, find that value within another list and copy the adjacent cells.
The values to look for will always be on the same column and the values to look into will always be in the same range or columns but not always in the same row.
For example.
AI:AI contains a list of ID's which will be manually input every day so they might have a different order.
C:AF has all the data to look into. C always being a list of ID values and I want for every ID found on AI:AI to be search for on C:C: and then once a match is found, I need specific adjancent cell values to be copied next to the ID found on AI.
The values that need to be returned are found on columns B,D,F,G,H,I,J,P,AF and they will always display on those columns.
I've been doing this based on vlookup and INDEX/MATCh formulas but I've come across some limitations for something I want to develop further so I'm trying to do this based on VBA.
View 5 Replies
View Related
Sep 24, 2012
I've been tackling this data capture/paste issue for a week or so. I found the string below which does provide a good foundation for my challenge. But, my basic level of understanding macros limits my modifications to meet my needs.
[URL] ......
I have 20 worksheets in my master file corresponding to Excel files individual associates will update weekly. After the associates have updated their individual files for the week, I want to capture the data entered and paste values into a master file containing a worksheet for each associate (sharing the same name as the individual associate file). All of these files are housed on team SharePoint sites.
I need a macro to perform several steps after clicking a "Run Update" macro button in the master file:
Open individual associate fileIn master file, search for each Initiative listed in column B (starting cell B3) in the individual associate file (in column B starting at cell B11)If Initiative is found in individual associate file, copy adjacent data in columns D:J for the respective rowIn master file, paste values to the corresponding Initiative row for the corresponding week's worth of dataIf Initiative is not found in the individual associate file, move to the next Initiative listed in the master fileRepeat these steps for each individual associate file
Linking would be the easiest way to accomplish this if I wanted to have a multitude of weekly individual files for the associates. However, I'd rather each associate have one file for them to update (basically overwriting their previous week's entries).
I need to ensure the paste values corresponds to the appropriate day of the week. In simpler terms, if the date in the individual associate file in cell D9 reads Oct 1, 2012, the data captured from that row needs to be pasted to the corresponding row/column in the master file that reads the same date.
View 2 Replies
View Related
Feb 22, 2013
Code to enter the current date in column if the values are entered in the adjacent column's.
View 2 Replies
View Related
Aug 30, 2007
I have a workbook with a sheet for every month. I have a searchbox searching for a client and jumping to that location. The problem I am having is that it takes me to the last occurence in the workbook if there is more that one client with the search criteria. Do you have any suggestions for a searchbox that whould take me to the first occurence and give me an option to go to the next occurence in the workbook. Please see the code below that I am using currently using.
Private Sub CommandButton1_Click()
Dim ws As Worksheet
Dim cl As Range, rng As Range
For Each ws In ActiveWorkbook.Worksheets
Set rng = ws.UsedRange
With rng
Set cl = .Find(Me.TextBox1.Value, LookIn:=xlValues)
If Not cl Is Nothing Then
Application.Goto cl
Else
View 7 Replies
View Related
Mar 28, 2008
I have an excel sheet with cols of information e.g IDNo, FirstName,LastName etc. I have created a form in VB where you enter the IDNo (& Click on a command button called View) It should populate designated textboxes on the Form. Thus it should check the col where the IDNo is stored, find the IDNo and populate the adjacent cols i.e FirstName, LastName in designated textboxes on the form.
View 3 Replies
View Related
Aug 28, 2007
I need a VBA script that can display a search box on multiple sheets within the same workbook similar to using ctrl + F and search values in column B only. If there is text or the row happens to be empty then it should skip that and only search numbers. Also the numbers in column B range from 50000 to 89000 and if there is a wrong number entered then I want to have a pop up box saying Error: invalid value or something like that.
Sub search_box()
Range("B49000").Select
Cells.Find(What:="some#", After:=ActiveCell, LookIn:=xlValues, LookAt:= _
xlWhole, SearchOrder:=xlByColumns, SearchDirection:=xlNext, MatchCase:= _
False, SearchFormat:=False).Activate
Cells.FindNext(After:=ActiveCell).Activate
End Sub
View 8 Replies
View Related
Feb 4, 2014
I have a Challenge want to delete the row values in which serial no enter the textbox1.
Conditions:- find the Serial no. and delete the values except serial No.
Attaching file for reference : Example.xls
View 3 Replies
View Related
Jul 21, 2014
I am using a ComboBox on a worksheet where the items in that box are pulled from Sheet1A:A. When the selection of the item in the comboBox is made, I would like several textboxes on that same page to be auto-populated based upon info derived from cells adjoining whatever row in Column A was chosen on Sheet 1.
For simplicity sake, let's say the range on Sheet 1 is A:H, and TextBox1 = "B", TextBox2= "C", etc.
so if,
A B C D
JOHN 15 DOGS BLUE
SUE 18 CATS RED
BOB 20 TURTLES YELLOW
When Combobox selection is JOHN, I want TextBox1= "15" TextBox2= "DOGS" TextBox3= "BLUE"
View 2 Replies
View Related
Jan 22, 2014
i will illustrate what i want to do here with these two excel sheets below. I want to some sort of coding that searches for A and B (Name of the Branch) from sheet 2 and copy the No. of transactions given against A & B from sheet 2 to sheet 1.
OR keep just A & B in sheet 2 and delete the rest of the rows so that i can manually copy and paste values against A & B.
SHEET 1
Name of the Branch
No. of Transactions
A
B
[Code]....
View 2 Replies
View Related
Feb 20, 2014
When I enter values in the userform textbox and press update button i need to copy whole row of data which is next to the textbox from userform to database sheet. (Copy only if data entered in the textbox).
Basically if textbox has a value in userform row 1 and it has a value copy it to database sheet if not skip and if value is in other texbox copy other rows.
The worksheet sample attached : example.xlsm
[URL] .....
View 9 Replies
View Related
Jun 25, 2014
I'm trying to create a supplier database. before I add a new supplier, I need vba to tell me if there is a cell that contains the value i entered in a textbox. i.e.
If textbox value = "prince" then I want vba to search for suppliers that contains "prince" in existing supplier list that includes: disney pixar princess prince charming microsoft
Ideally, it should tell me that suppliers "princess" and "prince charming" is a near match.
View 1 Replies
View Related
Jun 1, 2009
How i can encode a textbox on my userform to locate and bring all the data in the same row to the respective fields in the userform. I am working in excel 2003 vba. If you need more imformation reply me.
View 11 Replies
View Related
Jan 30, 2014
Any method to determine the number of instances a value ("4" for example) appears next to a specific value ("x" for example). I don't have a workbook; I'm just looking for any formula that can search for specific values and find the total number of instances that an adjoining cell contains data.
View 14 Replies
View Related
Mar 23, 2009
I tried both IF and LOOKUP and failed. I'm trying to search for values from one worksheet and identify whether or not those values exist in another worksheet. I attempted the following lookup in field A2:
=LOOKUP(B2,Sheet3!A$2:A$914,Sheet3!C$2:C$914)
B2 (thru B5000 or so) contains values I want to search for; sheet3!A$2:A914 is where I want to look and column C of that same sheet, entered the text "Yes" in an attempt to have the results list "Yes" for hits and N/A for misses. (All fields are text.) I copied the formula all the way down the sheet in column A. The result it is returning is N/A in A2 and Yes in A2 -to the bottom, which is incorrect.
View 2 Replies
View Related
May 27, 2014
I have a userform where I can select multiple items in a listbox and add them to another. I also have the ability to filter the first listbox to make finding items easier. The issue I am having concerns the clear filter button. As currently designed, the clear filter button will reset the initial listbox back to its default values. Ideally, I would like it to reset to the default values excluding those values that currently in the second listbox.
The entire code is below for reference, but it's the sub ClearFilter_Click that I am struggling with.
[Code] ....
View 2 Replies
View Related
Feb 25, 2008
I am having a bit of a battle with an update process that I am trying to run. Essentially I want to be able to select a range of data and update certain fields from a userform to a worksheet. The data is loaded into the userform successfully, however selection of data is a problem. I don't seem able to do it with FIND - all it does is fin the data, but the actual range is not selected for updating purposes.
Take a look at my code - I have not included the FIND process because that is where the problem is and I have nothing to show at this point. I have used some code that I found in the forum and modified it for my purposes and but for the range selection it works.
Private Sub UpdateContact()
Dim strAnswer, strFindIt As String
Dim sUpdateMe As Range
tbxWrkTel.Text = Format(tbxWrkTel, "000 000 0000")
tbxMobile.Text = Format(tbxMobile, "000 000 0000")
tbxHomeTel.Text = Format(tbxHomeTel, "000 000 0000")
If Not WorksheetFunction.CountIf(Sheet1.Columns(1), tbxCompany) > 0 Then 'To avoid duplicate data
If tbxCompany = "" Then tbxCompany = "-"
If tbxContact = "" Then tbxContact = "-"
If tbxWrkTel = "" Then tbxWrkTel = "-" .........
View 3 Replies
View Related
Mar 28, 2009
I need to link the textboxes of a form to the appropriate cells associated to the selection made by a combobox. And in the process I need to be able to Edit one of those Textboxes on the fly while the rest will be locked to the user.
Not sure if the editing of the Notes section can be real time of if it must be updated through a button.
View 10 Replies
View Related
Dec 29, 2009
I am trying to do is when a user puts in an RMA number into a textbox (txtReviseRMA) on the userform, it will search column B on the spreadsheet to find the matching RMA number. Then I want it to look in column G for the Serial number and populate another textbox (txtSerial1) on the userform with that number.
My problem is that there can be a little as 1 serial number to an RMA or as many as 14, and each serial number has to go into a different textbox (they are named txtSerial1 all the way to txtSerial14).
If there are multiple serial numbers being sent in on one RMA, they are on different lines.
For example:
Column B (RMAs) Column G (Serials)
(B1) R66245 (G1) AA-10-1000
(B2) R66245 (G2) BB-20-2000
(B3) R66300 (G3) CC-30-3000
(B4) R66305 (G4) DD-40-4000
(B5) R66305 (G5) AA-10-1000
(B6) R66305 (G6) FF-60-6000
(B7) R66375 (G7) GG-70-7000..................
View 2 Replies
View Related
Jul 1, 2008
I have two excel sheets. The first sheet has a column with codes and another column with dates. There are more than one date for the same code. The second sheet has just one unique code. I would like to match the code on the second sheet with the code on the first sheet and return ALL the dates associated with that code to the second sheet - horizontally.
View 5 Replies
View Related
Apr 28, 2013
I have 3 text boxes. and a numpad of 9 command buttons.
I wish to click on one text box and then click each of the "numpad" command buttons to populate the actve textbox with the number buttons that i click. What VBA code would i use to do this?
I think i can code something like this quite easily, the bit i am struggling with is how to make it so that only the active textbox text is amended.
View 1 Replies
View Related
Apr 2, 2012
I need to figure out a way to calculate days between textboxes and have the added total show in a text box.
Ie.
If there is a start and end date in scenario 1, the total will show in the total days text box.
If there is a start and end date in scenario 1 and 2, the total will show in the total days text box.
so on and so forth. Is there way to do this?
Total days
Scenario 1
Start Date
End Date
[Code]....
View 1 Replies
View Related
Sep 9, 2003
I'm from Bavaria, Germany. Right now, I am doing an internship for my studies. my problem: I need a search procedure which shows an Input Box where you can enter a word to search for. It should work like the original Excel search (Ctrl-F), but with a simpler design, like with my own Text "Enter your Query" and a Button "Submit Query" / "Quit search". Is there the possibility to Highlight the Search Target? The problem hereby is that this highlighting should not be permanent. That means the user sees the target for which he searched for, the cell highlighted in a different color, etc. But as soon as the user clicks onto another cell, etc., the highlighting vanishes. If there is no fitting match, there should be a MessageBox like "Sorry the Target xyz cannot be found"
View 9 Replies
View Related
Mar 24, 2014
I am working with a worksheet that has some cells merged e.g. A1 and A2 are merged together as 1 cell. I am using cell offset to reference values from the worksheet assign them to variables then populate another worksheet with their respective values. I noticed that cell.offset(row,column).value is not retrieving a value when merged cells are mixed with non-merged cells within a given row. Is there another method/function I can take advantage of here?
View 1 Replies
View Related
Mar 26, 2014
I want to write down the code that will populate values in "Sheet1" from the Access table. The column headers shows "Envelope types", "Envelope Size" fields from the Access table and each cell should store sum(volume) for each month in the table.
As I can't upload access table in the attachment so I have exported data into Workbook named "tblmain" as attached. But in actual tblmain is Access table. consider it an access table.
wrting code that will fetch data from access table and store in all the cells of the table in "Sheet1" of Elevate workbook.
View 7 Replies
View Related
