Fill Multiple Number Series In Same Column?
Jul 10, 2014I need to fill multiple number series in the same column. Example:
Have
Want
1
1
[Code]....
ADVERTISEMENT
Fill Series - Column With Multiple Values?
May 9, 2012I have a column:
LABEL COUNT
1 of 2
empty cell
1 of 2
empty cell
1 of 2
empty cell
1 of 2
empty cell
1 of 2
empty cell
1 of 16
15 empty cells
I need to fill the empty cell with the "series" (2 of 2, 2 of 16, 3 of 16). This is just an example of data - there are all different series - 1 of 12, 1 of 5, etc.
Anyway - was hoping to highlight the whole column and be able to auto fill instead of having to extend each series. I have tried straightforward fill series which doesnt work of course. I have tried go to special - blanks but cant find right combo to make it work.
Will it work or do I have to either do manually or with a macro?
Fill Series Down A Column
Jul 23, 2008Bet this is simple to someone...
How can a continue this fill series down a column?
=$BC$3
=$BC$4
=$BC$5
=$BC$6
I would copy, paste and edit only there are 2500 rows!
Fill Number Series Based On Start / Stop Of 2 Cells
Jan 18, 2008I have a excel sheet of data numbers which blongs a packet of inventory where i found number series like this:
Start Range End Range Qty
2101200 2101499 300
I have to draw this onto a series like 2101200 then 2101201 then 2010202 etc.
but some time these numbers are in qty 30000 or more. I have questions
1- If any macro colud fill series suppose if write number in A2 and qty in B2 so it reads the qty of b2 and fill the series in A. If i write 1 in A2 and write 50 in B2 so the series should be auto fill 1 to 50.
My Second question is opposit of my above question.
2- if i have different number series in column a and i want them to be as start number in column b and end number in column c and qty in column d based like mentioned below example.
Series [b]Start Range End Range Qty
1 1 1 1
3 3 3 1
5 5 7 3
6
7
Formula Fill Series On Right Column
Jan 6, 2014I am working on a spreadsheet and I need values from Sheet1!a2, a7, a12, a17 etc...
I want to fill in the formula ='Sheet1'!a2 etc, to fill column A in sheet2!
When I highlight and drop down to fill excel fills the column in increments of five like i need but doesn't start on the right one. Instead it fills the formula as ='Sheet1'!a6, (For cel A1) and ='Sheet1'!a11, (for cell A2) and so on.
Auto Fill Series When Value Changes In Another Column?
Jan 10, 2014I am trying to use the auto fill series but I need the series to start over every time the value change in another column.
If i use the auto fill series, it will copy 1,2,3,4,5 and so forth til the end of the column. In this case, i need the auto fill or some other function that will restart once it encounters a different value under the ID column. I've started below to show an example.
IDNo
0.11141
0.11142
0.11143
0.1121
0.1122
0.1123
0.1124
0.1125
[code]....
Updating Number In A Single Cell From A Series Of Values In Column?
May 22, 2014I am trying to read a value in cell A1 and make say cell B1 read the same. The data in cell A1 is a real time percentage value that gets updated every lets say 10 secs. Every time the data is updated the new value goes into the next cell A2, A3, A4..... and so on. Every time it gets updated (i.e into A1,A2,A3,A4.....and so on), I want to read the new value each time in B1.
View 9 Replies View Related200 Series But Get (The Maximum Number Of Series Per Chart Is 255) Error Message
Aug 4, 2014I run a large simulation experiment. I have a loop plotting data in excel of a user defined area. Because of the limit of 255 series I have allowed a maximum of 250 simulations (they all need to be plotted). But the length of each simulation is free. I know there is a limit of 32.000 data points in a graph and I have this as a condition too.
If I set the data range to 100 columns and 3000 rows the graph is produced when I plot by columns. (code below)
But if I set the data range to 250 columns and 1000 rows I get the above mentioned error message. Even though I only have 250 series.
After the data is plotted it is the code below that gets the error:
[Code] .....
Macro - Fill Columns D-N Only Up Till The Row Number In Column A
Feb 19, 2014I have a control chart macro which is being used for patient doses of a medication. Right now my macro automatically fills columns D-N down to row 100. However, I would like it to stop at the last row of data entered in column A. I have attached the code related to the formulae a
J
Sub Control_Chart_1()
'
' Control_Chart_1 Macro
[Code]....
Fill Series Of Cells
Feb 5, 2014I want to run a series of cells but how to do it. E.g.
Cell A1 to contain the data 2A
the next cell (A2) to read 2B
the next 2C etc etc
I've tried just dragging the cells down but it just duplicates 2A, 2B, 2C whereas I want it to fill the next cells as 2D, 2E etc
And I've tried using the fill series option but neither seems to be working (presumably due to the letter).
VBA To Insert Formula And Then Fill Down Number Of Rows In Reference Column
Apr 8, 2014I am trying to insert formulas to my cells in different columns and then fill down the formulas as many rows as in the reference column. So far I have put my formulas in a macro but I seem to get problems with " and ' symbols. My macro looks like this:
Sheets("Sold Articles Database").Select
Range("U3").Formula = " =VLOOKUP(LEFT(K3,2),'Input Variables'!$A$48:$B$52,2,FALSE)"
Range("V3").Formula = " =VLOOKUP(K3,'Product datas'!$A$2:$C$10000,3,FALSE)"
Range("W3").Formula = " =VLOOKUP(K3,'Product datas'!$A$2:$D$10000,4,FALSE)"
[Code] ........
Fill Down But Have Column Letter In Formula Change And Not Cell Number
Dec 30, 2009i want to fill down a column and instead of my formula changing from A6 to A7 i want it to change to B6.
View 9 Replies View RelatedDrag & Fill Series Only In One Particular Sheet
Oct 18, 2008I am not able to drag & fill series only in one particular sheet, in other sheets this function is working fine.
View 2 Replies View RelatedSeries Fill Color Method
Sep 17, 2009Using XL07 I'm trying to programmatically set the fill type to solid and the colour to a colorindex constant for a series in a chart.
I can select/activate specific charts and series, but can't work out how to modify the properties of the series.
I can't for the life of me piece together the method, properties and syntax for doing this.
Date Series / Fill Handle
Feb 2, 2012I would like to use the Fill Handle to create a column of dates.
The dates must be formatted like this: DD/MM/YYYY HH:MM
The Fill Handle completes the series, but not the way I want.
I want a series that changes the day only. So:
02/02/2012 09:00
03/02/2012 09:00
04/02/2012 09:00
For whatever reason, Excel currently adds a minute or two to the minutes and does not increase the date.
13/2/2012 09:20
14/2/2012 09:20
15/2/2012 09:20
13/2/2012 09:21
[Code] .......
Fill Series With Adding Dot Mark
Jun 18, 2014How to make fill series number with simple excel formula, like table below :
col.a (desired result)
col.b
1.
john
2.
lia
3.
leo margarette
4.
david lee
etc....
note : not use Vba...
Fill Series :: Declaring A Variable
Jul 28, 2009Prior to declaring a variable i used this code and it worked:
Sheets("442000ON-1+6").Range("C7").formula = "my formula"
range(C7).select
Selection.AutoFill Destination:=Range("C7:N7"), Type:=xlFillDefault
Than i declared a variable b/c i have a number of formulas i need to use but still needed it to fill the formula in a series after the formula ran. I started getting an error.
Fix was:
Dim formula1 As String
formula1 = "=SUMIF(Pivot!$A$6:$A$108,'442000ON-1+6'!$C$3,INDEX(Pivot!$B$6:$BP$106,0,MATCH('442000ON-1+6'!$B$1,Pivot!$B$5:$BP$5)))"
Sheets("442000ON-1+6").Range("C7").formula = formula1
Range("C7").Select
Set SourceRange = Worksheets("442000ON-1+6").Range("C7")
Set fillRange = Worksheets("442000ON-1+6").Range("C7:N7")
SourceRange.AutoFill Destination:=fillRange
Unique Project IDs - Custom Series Or Fill?
Jul 24, 2014I have a list of 600 unique project IDs in column A. I want to create a second list in Column B that references the contents in Column A, first row then duplicates that item for two subsequent rows, then a formula in the fourth row of Column B a reference to the second project ID in Column A row 2, with two duplicates in the fifth and sixth row.
Column A
Row 1 000891.AB
Row 2 000892.CD
Need to create:
Column B
Row 1 000891.AB
Row 2 000891.AB
Row 3 000891.AB
Row 4 000892.CD
Row 5 000892.CD
Row 6 000892.CD
Auto Fill Series Based On Condition ..
May 18, 2008Auto fill series based on Condition.(Excel 2003)
I know very little about macros (basically just concepts). I found this macro suggested in another thread (posted By VoG II…Thanks)
Sub test()
Dim Lastrow As Long
Lastrow = Range("A5").Value + 4
Range("B5").AutoFill Destination:=Range("B5:B" & Lastrow), Type:=xlFillSeries
End Sub
When this macro is run the first time it will fill in the numbers 2 through 15 (as I had hoped). Given 15 is the variable and 1 is the start of the range...
Fill Blanks With Linear Numeric Series
Apr 18, 2008I would like to find the blanks within a column. Using the available cell values above and below compute a sort of linear function then, using that linear function fill in the blanks in between. So the values are linearly increasing or decreasing (whatever the case maybe) to the next available nonblank cell value. spreadsheet attached.
View 3 Replies View RelatedFill In Missing Dates & Time From Series
Aug 9, 2008i have a time series of data at one hour interval ( from 6:00 hrs to 18:00 hrs ) each day and again from 6:00 to 18:00 hrs next day and so on for several years. in this series many data are missing. i ve to fill in these missing data in such a manner so that the new values becomes the linearly interpolated values in between the data given at any two hours. no rows are allowed to be inserted in between 18:00 hrs of the previous day to 6:00 hrs on the next day. pl see the attatchment.
View 2 Replies View RelatedSeries Fill Based On Variable Input Data?
Mar 21, 2014I have a spreadsheet where the start date is manually entered in Cell B1 and an end date is calculated in Cell B3. I would like to have the dates between the start and end date, with a step value of 7 days show in the rows under Cell B3. How do I get this to work?
View 3 Replies View RelatedMacro - Fill Series Requires Two Rows Of Data!
Aug 18, 2007regards the two attached files (both are identical) except '1' has TWO Rows of data above the Macro Button and works correctly whereas '2' has only ONE Row (the desired option but does not work correctly!( Inserts Row in wrong place and incorrectly fill series)).
basically the program inserts a additional row below the last data entered, copies a formula cell from above and finally (the problem area) Series Fills a cell from data above.
Auto Fill Series Based On Condition :: Numbers
Jan 19, 2008I am newer here and I want a macro in mentioned title. I have a number in column a2 and in column b2 quantity if in column a2 number is 2101400 and in column b2 i write quantity 50 so said number automatically fill series in column a like mentioned below...
View 9 Replies View RelatedFill Series That Combines Data From 2 Sheets In Blocks Of 10
Jun 5, 2006I have a spreadsheet with two sheets... Sheet1, and Sheet2, that I use as sort of a staging area to format info before bulk uploading to my product database. The products I'm working with at the moment have 10 subcategories below each of them. Sheet1 is the full product database listing. I place new subcategories in blocks of 10 that I plan to add to the database on Sheet2. Sheet2 also holds the default partial category names in cells A2-A11.
Part 1:
I am currently using the following formula on Sheet2, in column C to combine the category name value on Sheet1, with the default partial category name values on Sheet2 (A2-A11). I'll paste two blocks so you have a clear picture of what I mean by blocks of ten.
=CONCATENATE(Sheet1!B3407;" ";Sheet2!$A$2)
=CONCATENATE(Sheet1!B3407;" ";Sheet2!$A$3)
=CONCATENATE(Sheet1!B3407;" ";Sheet2!$A$4)
=CONCATENATE(Sheet1!B3407;" ";Sheet2!$A$5)
=CONCATENATE(Sheet1!B3407;" ";Sheet2!$A$6)
=CONCATENATE(Sheet1!B3407;" ";Sheet2!$A$7)
=CONCATENATE(Sheet1!B3407;" ";Sheet2!$A$8)
=CONCATENATE(Sheet1!B3407;" ";Sheet2!$A$9)
=CONCATENATE(Sheet1!B3407;" ";Sheet2!$A$10)..................
Asymmetric Fill (fill Out Column B Referencing Column A, But Only Incrementing By 1 Row In A Every 2 Cells In B)
Feb 1, 2010Is there some easy way to fill out column B referencing column A, but only incrementing by 1 row in A every 2 cells in B?
Example:
Column A:
A1 = 1
A2 = 2
A3 = 3
etc...
Column B (I would like to fill this, referencing column A):
B1 = A1
B2 empty
B3 = A2
B4 empty
B5 = A3
etc
If Fill In A Number Open Word And PDF Doc That Is Attached To That Number
Jun 3, 2014I have on the first tab a screen where you can fill in the name of the .doc or .pdf file.
That works fine, but now I would like that when I fill in a number and click on test, it opens te .doc and .pdf file that is attached for that number.
If you take a look at the pdf file you will see a second and a third tab.
First column is the number they need to fill in and the second column is the name of the .doc or .pdf that needs to be opened with that specific number.
How to link it and open both files for that specific number.
But not every number has a .doc as well as a .pdf.
Fill Date Series To Todays Date Using VBA
Aug 26, 2013I am trying to write a simple code that will take the last date in Col A and fill down until it gets to todays date.
Code:
Sub Fill_down_date()
Dim x As Integer
lr2 = Worksheets("sheet2").Cells(Rows.Count, "A").End(xlUp).Row
For x = lr2 To 20
If Cells(x, 1).Value < Date Then
Cells(x + 1, 1).Value = Cells(x, 1).Value + 1
If Cells(x, 1).Value
How To Extract Series Of Number From Within Data
Mar 1, 2012I have a spread sheet with some data strings in Column E.
In Column A I want to extract a series of number from within the data in column E.
Example data in Column E
C:cleanedsystems1021_update_log_2-12-2012.csv
C:cleanedsystems42_update_mail_log_2-12-2012.csv
I created a formula in column A "=MID(E2,20,4)". I drag this down the column and I get the following results
1021
42_u
The first result is fine but the problem is the second result. Because I am looking at fixed length I am often getting something other than the file number which I seek.
Is there a way to do a formula that will go to my starting positions (this is a constant starting point) and then look for the numbers before the first "_" as a stopping point? The maximum will always be 4 digit numbers but the problem is there are 1-3 digit numbers as well.
Delete Series Through Its Start And End Number
May 3, 2009I have different series number from column B to Q in Data Sheet, what I want is see strat and end range in temp sheet and delete(Shift xlup) numbers from Data Sheet from col a to q. If Series is like .....
View 9 Replies View Related