Fill Series That Combines Data From 2 Sheets In Blocks Of 10

Series Fill Based On Variable Input Data?

Mar 21, 2014

I have a spreadsheet where the start date is manually entered in Cell B1 and an end date is calculated in Cell B3. I would like to have the dates between the start and end date, with a step value of 7 days show in the rows under Cell B3. How do I get this to work?

View 3 Replies View Related

Macro - Fill Series Requires Two Rows Of Data!

Aug 18, 2007

regards the two attached files (both are identical) except '1' has TWO Rows of data above the Macro Button and works correctly whereas '2' has only ONE Row (the desired option but does not work correctly!( Inserts Row in wrong place and incorrectly fill series)).

basically the program inserts a additional row below the last data entered, copies a formula cell from above and finally (the problem area) Series Fills a cell from data above.

View 10 Replies View Related

Macro Combines Data From Several Workbooks Into One Workbook

Apr 19, 2006

I have several individual excel workbooks all in one folder that I need to do some analysis on, but in order to that i need to have them all in one workbook. all of the files are saved in the same folder on my shared drive. each record from each of the files needs to be transfered over into this blank template that i have. I used the Blank template to create all of the individual files, Now i just need to get them all into one file that is easier to work with

View 9 Replies View Related

Linking Blocks Of Cells Across Sheets

May 1, 2014

I have a master tab that has data grouped as follows

Column 1
title of a section (written once then left blank for the rest of a section)

Column 2
numerous descriptors (each in a new row)

Column 3
The response to the descriptors in column 2

I want to link entire sections from column 2 and 3 into different excel files so that if I make changes to column 2 or 3 in the master tab, the changes are made to all tabs. If there is a way, I'd like it if I add a row to the master, it is automatically added to the others.

View 2 Replies View Related

Delete Chart Series Across Sheets But Skip Protected Sheets

Mar 30, 2008

I have received following macro from someone to delete series but the problem is that it gives error when some sheets are protected, and I want those sheets to protected. When run it will ignore/leave protected sheets but delete series only from unprotected sheets

Private Sub CommandButton1_Click()
Dim Rng As Range, i As Long, r As Range, lVal, uVal
Dim DeleteCount As Double
Dim lRow As Long
Dim dr As Long
Dim dc As Long
dc = Sheets("Deleted Numbers").UsedRange.Columns.Count - 1
dr = Cells(Rows.Count, Sheets("Deleted Numbers").UsedRange.Columns.Count - 1).End(xlUp).Row + 1
If dr = 60001 Then ................

View 4 Replies View Related

Fill Series Down A Column

Jul 23, 2008

Bet this is simple to someone...

How can a continue this fill series down a column?

=$BC$3
=$BC$4
=$BC$5
=$BC$6

I would copy, paste and edit only there are 2500 rows!

View 14 Replies View Related

Fill Series Of Cells

Feb 5, 2014

I want to run a series of cells but how to do it. E.g.

Cell A1 to contain the data 2A
the next cell (A2) to read 2B
the next 2C etc etc

I've tried just dragging the cells down but it just duplicates 2A, 2B, 2C whereas I want it to fill the next cells as 2D, 2E etc

And I've tried using the fill series option but neither seems to be working (presumably due to the letter).

View 4 Replies View Related

Formula Fill Series On Right Column

Jan 6, 2014

I am working on a spreadsheet and I need values from Sheet1!a2, a7, a12, a17 etc...

I want to fill in the formula ='Sheet1'!a2 etc, to fill column A in sheet2!

When I highlight and drop down to fill excel fills the column in increments of five like i need but doesn't start on the right one. Instead it fills the formula as ='Sheet1'!a6, (For cel A1) and ='Sheet1'!a11, (for cell A2) and so on.

View 14 Replies View Related

Drag & Fill Series Only In One Particular Sheet

Oct 18, 2008

I am not able to drag & fill series only in one particular sheet, in other sheets this function is working fine.

View 2 Replies View Related

Series Fill Color Method

Sep 17, 2009

Using XL07 I'm trying to programmatically set the fill type to solid and the colour to a colorindex constant for a series in a chart.

I can select/activate specific charts and series, but can't work out how to modify the properties of the series.

I can't for the life of me piece together the method, properties and syntax for doing this.

View 2 Replies View Related

Date Series / Fill Handle

Feb 2, 2012

I would like to use the Fill Handle to create a column of dates.

The dates must be formatted like this: DD/MM/YYYY HH:MM

The Fill Handle completes the series, but not the way I want.

I want a series that changes the day only. So:

02/02/2012 09:00
03/02/2012 09:00
04/02/2012 09:00

For whatever reason, Excel currently adds a minute or two to the minutes and does not increase the date.

13/2/2012 09:20
14/2/2012 09:20
15/2/2012 09:20
13/2/2012 09:21

[Code] .......

View 7 Replies View Related

Auto Fill Series When Value Changes In Another Column?

Jan 10, 2014

I am trying to use the auto fill series but I need the series to start over every time the value change in another column.

If i use the auto fill series, it will copy 1,2,3,4,5 and so forth til the end of the column. In this case, i need the auto fill or some other function that will restart once it encounters a different value under the ID column. I've started below to show an example.

IDNo
0.11141
0.11142
0.11143
0.1121
0.1122
0.1123
0.1124
0.1125

[code]....

View 4 Replies View Related

Fill Series With Adding Dot Mark

Jun 18, 2014

How to make fill series number with simple excel formula, like table below :

col.a (desired result)
col.b

1.
john

2.
lia

3.
leo margarette

4.
david lee

etc....

note : not use Vba...

View 9 Replies View Related

Fill Series :: Declaring A Variable

Jul 28, 2009

Prior to declaring a variable i used this code and it worked:

Sheets("442000ON-1+6").Range("C7").formula = "my formula"
range(C7).select
Selection.AutoFill Destination:=Range("C7:N7"), Type:=xlFillDefault

Than i declared a variable b/c i have a number of formulas i need to use but still needed it to fill the formula in a series after the formula ran. I started getting an error.

Fix was:

Dim formula1 As String

formula1 = "=SUMIF(Pivot!$A$6:$A$108,'442000ON-1+6'!$C$3,INDEX(Pivot!$B$6:$BP$106,0,MATCH('442000ON-1+6'!$B$1,Pivot!$B$5:$BP$5)))"

Sheets("442000ON-1+6").Range("C7").formula = formula1

Range("C7").Select

Set SourceRange = Worksheets("442000ON-1+6").Range("C7")
Set fillRange = Worksheets("442000ON-1+6").Range("C7:N7")
SourceRange.AutoFill Destination:=fillRange

View 9 Replies View Related

Fill Series - Column With Multiple Values?

May 9, 2012

I have a column:

LABEL COUNT
1 of 2
empty cell
1 of 2
empty cell
1 of 2
empty cell
1 of 2
empty cell
1 of 2
empty cell
1 of 16
15 empty cells

I need to fill the empty cell with the "series" (2 of 2, 2 of 16, 3 of 16). This is just an example of data - there are all different series - 1 of 12, 1 of 5, etc.

Anyway - was hoping to highlight the whole column and be able to auto fill instead of having to extend each series. I have tried straightforward fill series which doesnt work of course. I have tried go to special - blanks but cant find right combo to make it work.

Will it work or do I have to either do manually or with a macro?

View 2 Replies View Related

Fill Multiple Number Series In Same Column?

Jul 10, 2014

I need to fill multiple number series in the same column. Example:

Have
Want
1
1

[Code]....

View 3 Replies View Related

Unique Project IDs - Custom Series Or Fill?

Jul 24, 2014

I have a list of 600 unique project IDs in column A. I want to create a second list in Column B that references the contents in Column A, first row then duplicates that item for two subsequent rows, then a formula in the fourth row of Column B a reference to the second project ID in Column A row 2, with two duplicates in the fifth and sixth row.

Column A
Row 1 000891.AB
Row 2 000892.CD

Need to create:
Column B
Row 1 000891.AB
Row 2 000891.AB
Row 3 000891.AB
Row 4 000892.CD
Row 5 000892.CD
Row 6 000892.CD

View 2 Replies View Related

Auto Fill Series Based On Condition ..

May 18, 2008

Auto fill series based on Condition.(Excel 2003)

I know very little about macros (basically just concepts). I found this macro suggested in another thread (posted By VoG II�Thanks)

Sub test()
Dim Lastrow As Long
Lastrow = Range("A5").Value + 4
Range("B5").AutoFill Destination:=Range("B5:B" & Lastrow), Type:=xlFillSeries
End Sub

When this macro is run the first time it will fill in the numbers 2 through 15 (as I had hoped). Given 15 is the variable and 1 is the start of the range...

View 9 Replies View Related

Fill Blanks With Linear Numeric Series

Apr 18, 2008

I would like to find the blanks within a column. Using the available cell values above and below compute a sort of linear function then, using that linear function fill in the blanks in between. So the values are linearly increasing or decreasing (whatever the case maybe) to the next available nonblank cell value. spreadsheet attached.

View 3 Replies View Related

Fill In Missing Dates & Time From Series

Aug 9, 2008

i have a time series of data at one hour interval ( from 6:00 hrs to 18:00 hrs ) each day and again from 6:00 to 18:00 hrs next day and so on for several years. in this series many data are missing. i ve to fill in these missing data in such a manner so that the new values becomes the linearly interpolated values in between the data given at any two hours. no rows are allowed to be inserted in between 18:00 hrs of the previous day to 6:00 hrs on the next day. pl see the attatchment.

View 2 Replies View Related

Show Chart Data Series Labels On All Series. 2007

May 31, 2008

I just recently installed Excel 2007 and I would like to know if it's possible to change all data points of a chart at the same time. In Excel 2003, I would normally hold down shift while clicking on each of the data points to make a global change. However, it appears I cannot do that in 2007.

I would like to display each data point's series name. When I go to Layout on the Excel Ribbon, and click on "Data Labels", and click on "More Data Label Options", the actual Y-axis values are shown for each data point. However, I do not want this - I actually only want the Series Name, but when I uncheck "Value" and check "Series Name" instead (under "Label Contains"), it only changes it for one of the series. Is there a better way, instead of going through each and every single series to make this change?

View 4 Replies View Related

Auto Fill Series Based On Condition :: Numbers

Jan 19, 2008

I am newer here and I want a macro in mentioned title. I have a number in column a2 and in column b2 quantity if in column a2 number is 2101400 and in column b2 i write quantity 50 so said number automatically fill series in column a like mentioned below...

View 9 Replies View Related

Fill Number Series Based On Start / Stop Of 2 Cells

Jan 18, 2008

I have a excel sheet of data numbers which blongs a packet of inventory where i found number series like this:

Start Range End Range Qty
2101200 2101499 300

I have to draw this onto a series like 2101200 then 2101201 then 2010202 etc.
but some time these numbers are in qty 30000 or more. I have questions

1- If any macro colud fill series suppose if write number in A2 and qty in B2 so it reads the qty of b2 and fill the series in A. If i write 1 in A2 and write 50 in B2 so the series should be auto fill 1 to 50.

My Second question is opposit of my above question.

2- if i have different number series in column a and i want them to be as start number in column b and end number in column c and qty in column d based like mentioned below example.
Series [b]Start Range End Range Qty
1 1 1 1
3 3 3 1
5 5 7 3
6
7

View 8 Replies View Related

A Formula That Combines The Functions?

Jul 11, 2014

Basically I want a formula that automatically inputs a code based on 'marital status'. This would be easily done using a vlookup except for the fact that one of these marital statuses has multiple options. Example: if the marital status reads "Married" the code can very depending on whether it is different gender/same gender. I have gender codes in a separate column.

For example:

Status--->Code
Single---------------->Sin
Civil P'ship------------>Civ
Married + MM--------->Mar 1
Married + FF---------->Mar 1
Married + MF--------->Mar 2

Married is, of course, in a separate cell from the gender codes, which is why I've attempted to bring the AND function into the IF statement. However, I'm having no luck.

The spreadsheet I am designing is already getting pretty big so I wanted to avoid having more columns than necessary. Is it even possible to group this together in one formula?

This is an example of a formula I have tried but returns the #value error.

=VLOOKUP(I31,Mapping!$A$1:$C$12,3,FALSE)+IF(AND(I31="Married",AH31="MM"),"MAR 12","")

View 3 Replies View Related

Numbering Blocks Of Data.

Nov 2, 2009

I have 250000 lines of data and at the moment they are in seperate blocks of different sizes, and seperated by 5 blank lines.

For Example

112
1523
523
1523

*5 BLANK LINES*

12
23

*5 BLANK LINES*

344
4563

etc.

What I would like to do is give each block a number.

1 112
1 1523
1 523
1 1523

*5 BLANK LINES*

2 12
2 23

*5 BLANK LINES*

3 344
3 4563

The lines in between will come out eventually I just need them there as they are difineing the blocks of data.

View 3 Replies View Related

Compare Blocks Matrix Of Data

Aug 29, 2006

I have the follwing data in A1:T17

3,4,7,9,10,11,21,32,33,35,37,41,47,57,60,64,69,72,74,75
4,6,9,10,12,13,15,21,22,31,35,47,49,52,56,63,64,72,74,75
4,6,9,10,15,21,31,33,34,41,42,45,46,47,57,60,68,72,74,78
3,4,6,10,11,13,18,21,30,32,33,35,46,53,60,67,69,74,77,78
6,9,13,16,21,22,31,46,48,49,52,61,63,64,69,70,71,75,78,79
3,4,7,10,14,17,18,21,28,31,33,36,37,43,47,57,65,69,75,80
4,7,13,15,17,25,29,32,37,42,45,47,50,57,60,64,68,71,72,74
3,7,10,11,16,18,28,34,35,43,47,51,52,55,56,57,60,64,71,72
8,9,10,12,16,21,22,28,38,47,49,51,52,53,54,55,64,66,71,72
4,5,6,9,12,15,19,20,30,34,35,38,45,47,54,56,63,65,72,78
5,6,9,12,15,21,26,31,32,43,44,47,64,66,67,68,69,74,75,80
..................

I want to compare the first set of 20 numbers (A1:T1) with the second set (A2:T2) and check how many numbers match. ** If the matched numbers
are >=10 ** then list them to the right of cell W1. In this example, 10 numbers matched are 4,9,10,21,35,47,64,72,74,75. List them in W1:AF1.

Now compare (A1:T1) with (A3:T3). In this example, 11 numbers matched 4,9,10,21,33,41,47,57,6,72,74 list them in W2:AG2.

Now compare (A1:T1) with (A4:T4). 10 numbers matched 3,4,10,11,21,32,33,35,60,69 list them in W3:AF3.

Compare (A1:T1) with (A5:T5). Here only 5 numbers matched 9,21,64,69,75 (Which is ** less than 10 ** - does not match the criteria) DO NOT LIST
this.

Compare (A1:T1) with (A6:T6). 11 numbers matched, 3,4,7,10,21,33,37,47,57,69,75 list them in cell W4:AG4.

.................

Sub Compare()

Dim r As Integer, rr As Integer, c As Integer, cc As Integer, opc As
Integer, opr As Long

opr = 1
For r = 1 To 16
For rr = r + 1 To 17
opc = 23
For c = 1 To 20
For cc = 1 To 20
If Cells(r, c) = Cells(rr, cc) Then
Cells(opr, opc) = Cells(r, c)
opc = opc + 1
End If
Next cc
...............................
Next r

End Sub
The above code runs fine but If I increase my rows from 17 to 1200 it takes 3 1/2 hours to complete. Can it be reduced?

View 9 Replies View Related

Copy Data Range Blocks

Jan 8, 2008

I would like to copy specific cells (all in one block) to another worksheet, then do a bunch of other things with the data (these steps work already), then go back to the original worksheet and copy the next block of data, repeat about 50 times, then stop at the end of the list.

I can't attach a file as I can't get it under the file size limit but the rows to move (just to any worksheet in the workbook, from there I can manipulate and move as required) each time are row 1 plus all those pertaining to each subject group. So for group 1 it would be row 1 plus rows 6 to 28 - for group 2 row 1 plus rows 29 to 51 - group 3 row 1 plus 52 to 74 etc. If I can just get looping through chunks of data and moving them around under my belt

View 5 Replies View Related

Sort Range Data Blocks

May 9, 2008

I have a list of data (as shown below under Input), which I would like to sort them according to their block number (as shown below under Output). The hurdle is the sorting should be able to cater for missing fields. Also, note that the sector can be recurring, that is "P,P,Q,Q", and then follow by "P,P,Q,Q" again.

INPUT
Block No.SectorData
11P19
22P
33P39
41P18
52P21
63P38
75P22
85P24..............................

View 2 Replies View Related

Picking Blocks Of Data To Copy From One Sheet To Another

Jul 22, 2014

I have a series of spreadsheets that represent the rosters of teams in a league. At the end of the league season, some teams qualify to advance to a final event, and some do not. I start with a file of all the teams for that level of competition. This list comes from a program that creates it's output in an excel '97-2003 format (and I can't change the way the data comes out of this program). I modify the data a bit by removing data from merged cells and rename that worksheet a 'Raw Data'. In the past I have manually copied and pasted the data for the teams that advance to a sheet called 'Roster Data'. I am hoping there is a way to automate this part of the chore.

There must be 6 blank lines between the team names on the 'Roster Data' tab, but some teams have more members than others, so they are not spaced the same on the 'raw data' tab. Is there a way to select teams from the 'Raw Data' tab and have only the selected teams show on the 'Roster data' tab, AND have the spacing become uniform?

View 13 Replies View Related