How to make fill series number with simple excel formula, like table below :
col.a (desired result)
col.b
1.
john
2.
lia
3.
leo margarette
4.
david lee
etc....
note : not use Vba...
I have a approx. 70 excel sheets with thousands of entries. Within a single sheet there are some duplicate entries (based on an account number). I find the duplicate entries by using the excel 2007 conditional formating and then sort by color to only show the duplicate entries. There are often hundreds of accounts that are duplicates. Sometimes there are more than 2 identical account duplicates (could be 3,4 or more). In each entry there is a number representing the rating of said account. These numbers differ within the duplicates. Example............
I am trying to find a formula that will choose a "winner" and enter a "W" based on the highest rating within the duplicate entries and then ideally assign an "L" to the loser duplicate account(s). Sometimes there is no rating, other times the rating could be the same in which case any account (does not matter) can be assigned a "W" and the others an "L"
The following code is supposed to produce six series on an xlXYScatter chart. It produces seven with the seventh series being a repeat of the sixth but named series 7.
Sub Chart2()
Dim DataRange As Range
Dim CellString As String 'Stores a cell range in the form "AA27:AB39"
Dim CurrentSeries As Integer
Dim SeasonCount As Integer
Worksheets("Hemisphere").ChartObjects(2).Activate
CurrentSeries = 1 ............
I'm using =CONCATENATE() to create Html code.
HTML Code:
=CONCATENATE("<img class=",""""&"alignleft size-medium"&""""," ","title=",""""&D6&""""," ","src=",""""&
"http://www."&E6&"/images/"&C6&""""," ","alt=",""""&F6&""""," />")
The code looks good in the cell:
HTML Code:
<img class="alignleft size-medium" title="Image title here" src=
"http://www.mywebsite.com/images/image_name.jpg" alt="Image alt here" />
But when I copy/paste onto a txt file, its adding an extra (unnecessary) Quotation mark (see code below)
HTML Code:
<img class=""alignleft size-medium"" title=""Image title here"" src=
""http://www.mywebsite.com/images/image_name.jpg"" alt=""Image alt here"" />
Bet this is simple to someone...
How can a continue this fill series down a column?
=$BC$3
=$BC$4
=$BC$5
=$BC$6
I would copy, paste and edit only there are 2500 rows!
I want to run a series of cells but how to do it. E.g.
Cell A1 to contain the data 2A
the next cell (A2) to read 2B
the next 2C etc etc
I've tried just dragging the cells down but it just duplicates 2A, 2B, 2C whereas I want it to fill the next cells as 2D, 2E etc
And I've tried using the fill series option but neither seems to be working (presumably due to the letter).
I am working on a spreadsheet and I need values from Sheet1!a2, a7, a12, a17 etc...
I want to fill in the formula ='Sheet1'!a2 etc, to fill column A in sheet2!
When I highlight and drop down to fill excel fills the column in increments of five like i need but doesn't start on the right one. Instead it fills the formula as ='Sheet1'!a6, (For cel A1) and ='Sheet1'!a11, (for cell A2) and so on.
I am not able to drag & fill series only in one particular sheet, in other sheets this function is working fine.
View 2 Replies View RelatedUsing XL07 I'm trying to programmatically set the fill type to solid and the colour to a colorindex constant for a series in a chart.
I can select/activate specific charts and series, but can't work out how to modify the properties of the series.
I can't for the life of me piece together the method, properties and syntax for doing this.
I would like to use the Fill Handle to create a column of dates.
The dates must be formatted like this: DD/MM/YYYY HH:MM
The Fill Handle completes the series, but not the way I want.
I want a series that changes the day only. So:
02/02/2012 09:00
03/02/2012 09:00
04/02/2012 09:00
For whatever reason, Excel currently adds a minute or two to the minutes and does not increase the date.
13/2/2012 09:20
14/2/2012 09:20
15/2/2012 09:20
13/2/2012 09:21
[Code] .......
I am trying to use the auto fill series but I need the series to start over every time the value change in another column.
If i use the auto fill series, it will copy 1,2,3,4,5 and so forth til the end of the column. In this case, i need the auto fill or some other function that will restart once it encounters a different value under the ID column. I've started below to show an example.
IDNo
0.11141
0.11142
0.11143
0.1121
0.1122
0.1123
0.1124
0.1125
[code]....
Prior to declaring a variable i used this code and it worked:
Sheets("442000ON-1+6").Range("C7").formula = "my formula"
range(C7).select
Selection.AutoFill Destination:=Range("C7:N7"), Type:=xlFillDefault
Than i declared a variable b/c i have a number of formulas i need to use but still needed it to fill the formula in a series after the formula ran. I started getting an error.
Fix was:
Dim formula1 As String
formula1 = "=SUMIF(Pivot!$A$6:$A$108,'442000ON-1+6'!$C$3,INDEX(Pivot!$B$6:$BP$106,0,MATCH('442000ON-1+6'!$B$1,Pivot!$B$5:$BP$5)))"
Sheets("442000ON-1+6").Range("C7").formula = formula1
Range("C7").Select
Set SourceRange = Worksheets("442000ON-1+6").Range("C7")
Set fillRange = Worksheets("442000ON-1+6").Range("C7:N7")
SourceRange.AutoFill Destination:=fillRange
I have the following code which puts a series onto a chart
With Charts("Test Chart")
.SetSourceData Source:=Sheets("Data").Range("A1:B" & Nreadings), PlotBy:=xlColumns
.Axes(xlCategory).MinimumScale = 1
.Axes(xlCategory).MaximumScale = Nteeth
.Axes(xlValue).MinimumScale = Miny
.Axes(xlValue).MaximumScale = Maxy
End With
I would like to add a 2nd or third series onto the same chart using the same scale etc. How do I do this in VBA code? Whenever I add another line to add a series it just overwrites the first series I have shown here.
I have a column:
LABEL COUNT
1 of 2
empty cell
1 of 2
empty cell
1 of 2
empty cell
1 of 2
empty cell
1 of 2
empty cell
1 of 16
15 empty cells
I need to fill the empty cell with the "series" (2 of 2, 2 of 16, 3 of 16). This is just an example of data - there are all different series - 1 of 12, 1 of 5, etc.
Anyway - was hoping to highlight the whole column and be able to auto fill instead of having to extend each series. I have tried straightforward fill series which doesnt work of course. I have tried go to special - blanks but cant find right combo to make it work.
Will it work or do I have to either do manually or with a macro?
I need to fill multiple number series in the same column. Example:
Have
Want
1
1
[Code]....
I have a list of 600 unique project IDs in column A. I want to create a second list in Column B that references the contents in Column A, first row then duplicates that item for two subsequent rows, then a formula in the fourth row of Column B a reference to the second project ID in Column A row 2, with two duplicates in the fifth and sixth row.
Column A
Row 1 000891.AB
Row 2 000892.CD
Need to create:
Column B
Row 1 000891.AB
Row 2 000891.AB
Row 3 000891.AB
Row 4 000892.CD
Row 5 000892.CD
Row 6 000892.CD
Auto fill series based on Condition.(Excel 2003)
I know very little about macros (basically just concepts). I found this macro suggested in another thread (posted By VoG II…Thanks)
Sub test()
Dim Lastrow As Long
Lastrow = Range("A5").Value + 4
Range("B5").AutoFill Destination:=Range("B5:B" & Lastrow), Type:=xlFillSeries
End Sub
When this macro is run the first time it will fill in the numbers 2 through 15 (as I had hoped). Given 15 is the variable and 1 is the start of the range...
I would like to find the blanks within a column. Using the available cell values above and below compute a sort of linear function then, using that linear function fill in the blanks in between. So the values are linearly increasing or decreasing (whatever the case maybe) to the next available nonblank cell value. spreadsheet attached.
View 3 Replies View Relatedi have a time series of data at one hour interval ( from 6:00 hrs to 18:00 hrs ) each day and again from 6:00 to 18:00 hrs next day and so on for several years. in this series many data are missing. i ve to fill in these missing data in such a manner so that the new values becomes the linearly interpolated values in between the data given at any two hours. no rows are allowed to be inserted in between 18:00 hrs of the previous day to 6:00 hrs on the next day. pl see the attatchment.
View 2 Replies View RelatedI want to use 4 toggle buttons to be able to add and remove 4 different series to a chart. When the toggle button is clicked, a specific series is added to a chart, and when it is unclicked then the series would be removed.
The problem I am running into is that unless I add and remove each series in a specific order, I will get an error because I may be trying to remove a series whose series number is not on the series collection in the chart.
for example: if I remove series number 2 with the toggle button for that specific series, then the toggle button for series number 3 will remove the old series 4 (which is now 3), and the toggle button for series 4 won't work because series 4 will now have become series 3.
Therefore, would there be a way to remove a series based on the name of the series, rather than the series collection number?
I have a worksheet where I am collecting data and a seperat Chart. The first part of this code which adds a new row in my table works perfectly fine, but the latter part (based on a macro recording) does not. I need to specify the relevant row for the new series in the bubble chart. The colums are of course the same.
Private Sub CommandButton1_Click()
Dim LastRow, LastRef As Long
'Works!
ThisWorkbook.Worksheets("Projektradar - input").Select
Range("Q3").Activate
LastRef = ActiveCell.Value
Range("Q3").Value = LastRef + 1
I have a spreadsheet where the start date is manually entered in Cell B1 and an end date is calculated in Cell B3. I would like to have the dates between the start and end date, with a step value of 7 days show in the rows under Cell B3. How do I get this to work?
View 3 Replies View Relatedregards the two attached files (both are identical) except '1' has TWO Rows of data above the Macro Button and works correctly whereas '2' has only ONE Row (the desired option but does not work correctly!( Inserts Row in wrong place and incorrectly fill series)).
basically the program inserts a additional row below the last data entered, copies a formula cell from above and finally (the problem area) Series Fills a cell from data above.
I am newer here and I want a macro in mentioned title. I have a number in column a2 and in column b2 quantity if in column a2 number is 2101400 and in column b2 i write quantity 50 so said number automatically fill series in column a like mentioned below...
View 9 Replies View RelatedI have a spreadsheet with two sheets... Sheet1, and Sheet2, that I use as sort of a staging area to format info before bulk uploading to my product database. The products I'm working with at the moment have 10 subcategories below each of them. Sheet1 is the full product database listing. I place new subcategories in blocks of 10 that I plan to add to the database on Sheet2. Sheet2 also holds the default partial category names in cells A2-A11.
Part 1:
I am currently using the following formula on Sheet2, in column C to combine the category name value on Sheet1, with the default partial category name values on Sheet2 (A2-A11). I'll paste two blocks so you have a clear picture of what I mean by blocks of ten.
=CONCATENATE(Sheet1!B3407;" ";Sheet2!$A$2)
=CONCATENATE(Sheet1!B3407;" ";Sheet2!$A$3)
=CONCATENATE(Sheet1!B3407;" ";Sheet2!$A$4)
=CONCATENATE(Sheet1!B3407;" ";Sheet2!$A$5)
=CONCATENATE(Sheet1!B3407;" ";Sheet2!$A$6)
=CONCATENATE(Sheet1!B3407;" ";Sheet2!$A$7)
=CONCATENATE(Sheet1!B3407;" ";Sheet2!$A$8)
=CONCATENATE(Sheet1!B3407;" ";Sheet2!$A$9)
=CONCATENATE(Sheet1!B3407;" ";Sheet2!$A$10)..................
I'm trying to create a spreadsheet for irrigation system program times. Each program has a start time, say 2 a.m. Multiple zones then run for varying times in a cycle. I need to add the run time to the start time to produce the next start time, and continue that through many zones. I can get the first few by simply formatting the cells as ##:## and using =F2+G2 (the start time is in F and the run time is in G) using 20 minute run time as a test. But when it gets to the third zone, my results show 2:60 a.m. and all results are incorrect from there on. Is there any way to do what I need in Excel?
View 2 Replies View RelatedI have a excel sheet of data numbers which blongs a packet of inventory where i found number series like this:
Start Range End Range Qty
2101200 2101499 300
I have to draw this onto a series like 2101200 then 2101201 then 2010202 etc.
but some time these numbers are in qty 30000 or more. I have questions
1- If any macro colud fill series suppose if write number in A2 and qty in B2 so it reads the qty of b2 and fill the series in A. If i write 1 in A2 and write 50 in B2 so the series should be auto fill 1 to 50.
My Second question is opposit of my above question.
2- if i have different number series in column a and i want them to be as start number in column b and end number in column c and qty in column d based like mentioned below example.
Series [b]Start Range End Range Qty
1 1 1 1
3 3 3 1
5 5 7 3
6
7
I have a list of numbers with 2, 3, and 4 digits. Is there a formula that can recognize if there are only 2 digits, it will add 2 zeros in front of the number.
For example,
47 will become 0047
234 will become 0234
1234 will become 1234
I want to add a user-form on a chart, which will have check-boxes that will allow me to select series(lines) that I want see and compare in a chart. Currently my line chart has 24 series (Lines) which makes the chart very difficult to view and looks very busy. How do I add list of check-boxes that will allow me to select one or multiple lines that I want to see at a time?
View 2 Replies View Relatedi have an excel file which contains data, I want to be able to search this file and to fill the cell and its next 3 cells to the right with a certain colour. Is this possible as I have wrote some vba to do this but, Im only able to search and not fill the cells with the correct colour.