I am working on a spreadsheet and I need values from Sheet1!a2, a7, a12, a17 etc...
I want to fill in the formula ='Sheet1'!a2 etc, to fill column A in sheet2!
When I highlight and drop down to fill excel fills the column in increments of five like i need but doesn't start on the right one. Instead it fills the formula as ='Sheet1'!a6, (For cel A1) and ='Sheet1'!a11, (for cell A2) and so on.
Bet this is simple to someone...
How can a continue this fill series down a column?
=$BC$3
=$BC$4
=$BC$5
=$BC$6
I would copy, paste and edit only there are 2500 rows!
I am trying to use the auto fill series but I need the series to start over every time the value change in another column.
If i use the auto fill series, it will copy 1,2,3,4,5 and so forth til the end of the column. In this case, i need the auto fill or some other function that will restart once it encounters a different value under the ID column. I've started below to show an example.
IDNo
0.11141
0.11142
0.11143
0.1121
0.1122
0.1123
0.1124
0.1125
[code]....
I have a column:
LABEL COUNT
1 of 2
empty cell
1 of 2
empty cell
1 of 2
empty cell
1 of 2
empty cell
1 of 2
empty cell
1 of 16
15 empty cells
I need to fill the empty cell with the "series" (2 of 2, 2 of 16, 3 of 16). This is just an example of data - there are all different series - 1 of 12, 1 of 5, etc.
Anyway - was hoping to highlight the whole column and be able to auto fill instead of having to extend each series. I have tried straightforward fill series which doesnt work of course. I have tried go to special - blanks but cant find right combo to make it work.
Will it work or do I have to either do manually or with a macro?
I need to fill multiple number series in the same column. Example:
Have
Want
1
1
[Code]....
I want to run a series of cells but how to do it. E.g.
Cell A1 to contain the data 2A
the next cell (A2) to read 2B
the next 2C etc etc
I've tried just dragging the cells down but it just duplicates 2A, 2B, 2C whereas I want it to fill the next cells as 2D, 2E etc
And I've tried using the fill series option but neither seems to be working (presumably due to the letter).
I am not able to drag & fill series only in one particular sheet, in other sheets this function is working fine.
View 2 Replies View RelatedUsing XL07 I'm trying to programmatically set the fill type to solid and the colour to a colorindex constant for a series in a chart.
I can select/activate specific charts and series, but can't work out how to modify the properties of the series.
I can't for the life of me piece together the method, properties and syntax for doing this.
I would like to use the Fill Handle to create a column of dates.
The dates must be formatted like this: DD/MM/YYYY HH:MM
The Fill Handle completes the series, but not the way I want.
I want a series that changes the day only. So:
02/02/2012 09:00
03/02/2012 09:00
04/02/2012 09:00
For whatever reason, Excel currently adds a minute or two to the minutes and does not increase the date.
13/2/2012 09:20
14/2/2012 09:20
15/2/2012 09:20
13/2/2012 09:21
[Code] .......
How to make fill series number with simple excel formula, like table below :
col.a (desired result)
col.b
1.
john
2.
lia
3.
leo margarette
4.
david lee
etc....
note : not use Vba...
Prior to declaring a variable i used this code and it worked:
Sheets("442000ON-1+6").Range("C7").formula = "my formula"
range(C7).select
Selection.AutoFill Destination:=Range("C7:N7"), Type:=xlFillDefault
Than i declared a variable b/c i have a number of formulas i need to use but still needed it to fill the formula in a series after the formula ran. I started getting an error.
Fix was:
Dim formula1 As String
formula1 = "=SUMIF(Pivot!$A$6:$A$108,'442000ON-1+6'!$C$3,INDEX(Pivot!$B$6:$BP$106,0,MATCH('442000ON-1+6'!$B$1,Pivot!$B$5:$BP$5)))"
Sheets("442000ON-1+6").Range("C7").formula = formula1
Range("C7").Select
Set SourceRange = Worksheets("442000ON-1+6").Range("C7")
Set fillRange = Worksheets("442000ON-1+6").Range("C7:N7")
SourceRange.AutoFill Destination:=fillRange
I have a list of 600 unique project IDs in column A. I want to create a second list in Column B that references the contents in Column A, first row then duplicates that item for two subsequent rows, then a formula in the fourth row of Column B a reference to the second project ID in Column A row 2, with two duplicates in the fifth and sixth row.
Column A
Row 1 000891.AB
Row 2 000892.CD
Need to create:
Column B
Row 1 000891.AB
Row 2 000891.AB
Row 3 000891.AB
Row 4 000892.CD
Row 5 000892.CD
Row 6 000892.CD
Auto fill series based on Condition.(Excel 2003)
I know very little about macros (basically just concepts). I found this macro suggested in another thread (posted By VoG II…Thanks)
Sub test()
Dim Lastrow As Long
Lastrow = Range("A5").Value + 4
Range("B5").AutoFill Destination:=Range("B5:B" & Lastrow), Type:=xlFillSeries
End Sub
When this macro is run the first time it will fill in the numbers 2 through 15 (as I had hoped). Given 15 is the variable and 1 is the start of the range...
I would like to find the blanks within a column. Using the available cell values above and below compute a sort of linear function then, using that linear function fill in the blanks in between. So the values are linearly increasing or decreasing (whatever the case maybe) to the next available nonblank cell value. spreadsheet attached.
View 3 Replies View Relatedi have a time series of data at one hour interval ( from 6:00 hrs to 18:00 hrs ) each day and again from 6:00 to 18:00 hrs next day and so on for several years. in this series many data are missing. i ve to fill in these missing data in such a manner so that the new values becomes the linearly interpolated values in between the data given at any two hours. no rows are allowed to be inserted in between 18:00 hrs of the previous day to 6:00 hrs on the next day. pl see the attatchment.
View 2 Replies View RelatedI have a spreadsheet where the start date is manually entered in Cell B1 and an end date is calculated in Cell B3. I would like to have the dates between the start and end date, with a step value of 7 days show in the rows under Cell B3. How do I get this to work?
View 3 Replies View Relatedregards the two attached files (both are identical) except '1' has TWO Rows of data above the Macro Button and works correctly whereas '2' has only ONE Row (the desired option but does not work correctly!( Inserts Row in wrong place and incorrectly fill series)).
basically the program inserts a additional row below the last data entered, copies a formula cell from above and finally (the problem area) Series Fills a cell from data above.
I am newer here and I want a macro in mentioned title. I have a number in column a2 and in column b2 quantity if in column a2 number is 2101400 and in column b2 i write quantity 50 so said number automatically fill series in column a like mentioned below...
View 9 Replies View RelatedI have a spreadsheet with two sheets... Sheet1, and Sheet2, that I use as sort of a staging area to format info before bulk uploading to my product database. The products I'm working with at the moment have 10 subcategories below each of them. Sheet1 is the full product database listing. I place new subcategories in blocks of 10 that I plan to add to the database on Sheet2. Sheet2 also holds the default partial category names in cells A2-A11.
Part 1:
I am currently using the following formula on Sheet2, in column C to combine the category name value on Sheet1, with the default partial category name values on Sheet2 (A2-A11). I'll paste two blocks so you have a clear picture of what I mean by blocks of ten.
=CONCATENATE(Sheet1!B3407;" ";Sheet2!$A$2)
=CONCATENATE(Sheet1!B3407;" ";Sheet2!$A$3)
=CONCATENATE(Sheet1!B3407;" ";Sheet2!$A$4)
=CONCATENATE(Sheet1!B3407;" ";Sheet2!$A$5)
=CONCATENATE(Sheet1!B3407;" ";Sheet2!$A$6)
=CONCATENATE(Sheet1!B3407;" ";Sheet2!$A$7)
=CONCATENATE(Sheet1!B3407;" ";Sheet2!$A$8)
=CONCATENATE(Sheet1!B3407;" ";Sheet2!$A$9)
=CONCATENATE(Sheet1!B3407;" ";Sheet2!$A$10)..................
Is there some easy way to fill out column B referencing column A, but only incrementing by 1 row in A every 2 cells in B?
Example:
Column A:
A1 = 1
A2 = 2
A3 = 3
etc...
Column B (I would like to fill this, referencing column A):
B1 = A1
B2 empty
B3 = A2
B4 empty
B5 = A3
etc
I have a formula
=LEFT(L2,FIND(".",L2,1)-1)
I need a macro to copy this to the last blank cell in the column, the last blank cell will be different each month otherwaise i would have just been able to enter a range L2:L6000.
I want my column to be populated by formula using VBA. Let's say on row1, the formula is = SUMIF(mysheet!$L:$L,$A1&C$1&"09",mysheet!$M:$M). And on row 2, the formula is
=SUMIF(mysheet!$L:$L,$A2&C$1&"09",mysheet!$M:$M). And on row 3, the formula is =SUMIF(mysheet!$L:$L,$A3&C$1&"09",mysheet!$M:$M). And this is done up to the last row. How do I do this?
I have a excel sheet of data numbers which blongs a packet of inventory where i found number series like this:
Start Range End Range Qty
2101200 2101499 300
I have to draw this onto a series like 2101200 then 2101201 then 2010202 etc.
but some time these numbers are in qty 30000 or more. I have questions
1- If any macro colud fill series suppose if write number in A2 and qty in B2 so it reads the qty of b2 and fill the series in A. If i write 1 in A2 and write 50 in B2 so the series should be auto fill 1 to 50.
My Second question is opposit of my above question.
2- if i have different number series in column a and i want them to be as start number in column b and end number in column c and qty in column d based like mentioned below example.
Series [b]Start Range End Range Qty
1 1 1 1
3 3 3 1
5 5 7 3
6
7
I am trying to insert formulas to my cells in different columns and then fill down the formulas as many rows as in the reference column. So far I have put my formulas in a macro but I seem to get problems with " and ' symbols. My macro looks like this:
Sheets("Sold Articles Database").Select
Range("U3").Formula = " =VLOOKUP(LEFT(K3,2),'Input Variables'!$A$48:$B$52,2,FALSE)"
Range("V3").Formula = " =VLOOKUP(K3,'Product datas'!$A$2:$C$10000,3,FALSE)"
Range("W3").Formula = " =VLOOKUP(K3,'Product datas'!$A$2:$D$10000,4,FALSE)"
[Code] ........
i want to fill down a column and instead of my formula changing from A6 to A7 i want it to change to B6.
View 9 Replies View RelatedI am trying to write a simple code that will take the last date in Col A and fill down until it gets to todays date.
Code:
Sub Fill_down_date()
Dim x As Integer
lr2 = Worksheets("sheet2").Cells(Rows.Count, "A").End(xlUp).Row
For x = lr2 To 20
If Cells(x, 1).Value < Date Then
Cells(x + 1, 1).Value = Cells(x, 1).Value + 1
If Cells(x, 1).Value
1) Not using a macro and combining relevant w/s functions, is there an intelligent way to return the value of:
SUM(n=n1 to n=n2) of (-1)^(n-1)*(n)^(n-2)/(n-1)!*X^n
to a cell containing the formula ??
2)Example:
n1 in cell A5:: 1 (integer variable)
n2 in cell A6:: 32 (integer variable)
X value in cell A7::1.00
Returned sum in cell A8:: 0.567143 ...
I'm constructing a dynamic chart and I'm having difficulty naming the series formula.
I wish the Y values to pick up values in a different sheet and have entered the following formula :
=Rnd4Projects.xls!,Timeline!ChtYLeics
Workbook is called Rnd4Projects and the data is contained in a different sheet, called Timeline.
However, I keep getting an error message to say there is a problem with the formula. how this formula needs to be entered in Series Values box?
am looking to find the most recent value in a series of cells that I define. I have set up a worksheet for each month and I want to only pull out the latest total entered for a particular cell reference (cell B16 in each worksheet has the number I need).
I tried using : =LOOKUP(9.99999999E+307,Jul:Jun!B16) but that just gives me a #value error.
I had a search through the archives too and found [url] and [url](neither of which I really understood or could use, although I did have a go), anyone got any ideas? Am sure it's very easy!
Just to clarify, I have 12 worksheets, each with a different month. Each month I enter data into the relevant worksheet. I want a running total on a summary worksheet and need to pull out the latest numbers automatically (they don't need to SUM or anything).
I have a large datset that looks like this:
++++++++++++++++++++++++++++++++++
+ + A + B + C +
++++++++++++++++++++++++++++++++++
+1+ ID + EventDate + EventType +
+2+ 111 + 1/1/1995 + Visit +
+3+ 111 + 1/30/1995 + Vaccine +
+4+ 111 + 4/22/1998 + Visit +
+5+ 222 + 7/7/2000 + Survey +
+6+ 333 + 8/8/2001 + Labs +
+7+ 333 + 8/22/07 + Pharmacy +
+8+ 333 + 8/22/07 + Visit +
I would like to shade the rows with alternating colors so that all the data pertaining to a given ID can be easily spotted. In the example above, I would need A2:C4 to be shaded one color, A5:C5 another color, and A6:C8 the first color again.
I am using Excel 2007.
