1. Copy cells B5 to V-First blank row in Strength Tests worksheet 2. Paste cells into Racks worksheet in cell C5 3. Change font size to 6 4. Sort by Column T descending then by Column C ascending 5. Copy one row (A5-W5 (1Rx23C)) from Racks worksheet 6. Paste row into M1 worksheet in cell D4 7. Print M1 8. Drop down one row on the Racks worksheet 9. Repeat steps 5-8 until there's a blank row.
The colour of the percentage cell changes according to its percentage. I would like the S/N cells to have the same colour as the total percentage cells automatically. (Even when the percentage updates)
Secondly, for the cells under "Target", if the target dates are 1 day before today(the current date on a particular day) and the actual date is not filled, the cell fill will turn amber.
If today is on or after the target date and the actual date is not filled, the cell will turn red.
However, if the actual date is filled, the target date cell will be filled green, overwriting the above two condition.
I have two worksheets, and when the value in one changes I'd like the value in the other to change as well. Pasting a link doesn't work, because on the "Paste to" sheet I've applied conditional formatting, and it doesn't register a change event when it's a pasted link. I tried running a macro to copy the whole column and paste it on a change event, but that didn't alert the conditional formatting to kick in.
The "Paste From" sheet has dropdowns in column C. The "Paste to" sheet has corresponding dropdowns in column F. So, if someone changes the selection in C3 on "Paste From", I'd like F3 on "Paste to" to change.
I have a file that needs to copy/change and paste data if column H has the following 3 abbrev but each of them has its paste criteria. see details below.
1) In column H, if abbrev ="Prod 10", insert 9 rows and then copy and paste but the codes in column G of the copied rows need to change to different numbers.
2) If abbrev ="Prod 4", change the code of the following 3 rows to 44298.
3) If abbrev ="Prod 14", insert 13 rows and then copy and paste.
I have a sheet which autofilters according to a validation list in cell E2 using the code.
I have then used subtotal arrays to calculate the mean, median, max, min and total count for whichever values the filter shows.
What I want to do next is have a code which will select each possible option from the validation list (triggering the autofilter) and copy and paste the values from each dependent formula into a new sheet.
I have a Piece of Code that copys a Row in my Spreadsheet and Pastes it underneath the original Row.
The Problem that I am having is that within the Row it Copys there is a Spinner in it. I want the Spinner to be copied also but the Cell that the Spinner is Linked to Says as the Original Cell, it doesnt move Down with the New Row Pasted in.
Here is the code that i have written to Copy the Row and Paste it down a Row.
I want to automate the following steps when cell A8:A11 changes in sheet "InfoAA":
(1) clear contents and formats of cells A1:A4 in sheet "InfoBB" (2) copy cells A8:A11 of sheet "InfoAA" (which are formulas) and past it as text in cells A1:A4 of sheet "InfoBB". (3) then automatically run a recorded macro named "BoldFirstName"
I've got this macro, that will auto fill in the "username" (Col. J),and the date (Col. K), When a value is "typed" into the column I for the same row.
If I "Copy N Paste" the same value down column I for any given number of rows, the data will not autofill in to (Col.J&K). This only happens when a value is typed.
Is there a way to fix this so it will auto fill when, a value is "Copied and Pasted"?
Also, how would I set the range for this to happen for row 9 and down. I don't want the auto fill happening in rows 1-8.
I've attached an example layout. Here's the code I'm working with:
Essentially I need to copy the first 8 cells in a row in one sheet (for example: A3:I3) when the word "Actuals" is entered into A3 from a drop down list. Then the copied data needs to be pasted to a another existing worksheet in the same workbook in the next available row. The data includes mostly values, but there is a formula in column H that creates a hyperlink out of the content in column G, friendly name in column I.
I am not stuck on the idea of having "Actuals" entered in column A as the trigger or change event and there will be times when a new copy/paste of the same data will need to be done more than once at a later date.
For further information, column B contains a serial number/productID number.
Our small family business has a mailing campaign that we track with excel. However, we're very concerned about users opening the macro-filled master spreadsheet. Instead, we'd like a macro to do everything for them.
When a letter comes back in the mail with a bad address, the user types the Street number and street name such as "1234 Main St" into $A2 of c:dropbox eturned.xlsm, presses the macro button, and it should do the following:
Opens and Searches "Sheet1", "column S", in the file c:dropboxmaster1.xlsm, and finds the LAST instance of the address typed.Selects that entire rowCopies the entire row.Pastes the contents into the row of the active cell in the destination spreadsheet, overwriting what was there before. Such as $2:$2 if the address was typed in $A2.In the master1.xlsm spreadsheet, sets the entire copied row color to "gray".closes master1.xlsm and saves changes.
The end result is that the user now has an identical row of information in their spreadsheet, and the master spreadsheet's row is colored gray indicating it has been completed.
Other notes:I'm open to more efficient steps than this if you have them.There are approx 5,000 records to search through in master1.xlsx at any given time.
I have used the below code to insert a new row when the value in coulmn A change. I now need to evolve it so that the new row will contain a specific value depending on the changing value:
Before: Column A Column B one test one test two test two test three test three test
After:
Column A Column B one test one test Coz two............................
I have this formula: =VLOOKUP(C:C,Sheet2!A1:A10000,1,FALSE)
that I need to put in column A from 1 to 26,xxx. Is there a way to paste that formula in every cell down the column without the part in bold changing? I'm not too keen on hitting ctrl+v over 26 thousand times.
I want to input a column of formulas where the part of the formula which changes on each row from the row above is the worksheet name. I want the cell ref to remain the same
ie
formula in B6 ='WC - 23-03-09'!J2
formula in B7 ='WC - 30-03-09'!J2
The sequence of the worksheets should follow the sequence as they appear left to right in the worksheet bar at the bottom of the page.
I was looking for a way to "fill" in the rest of the column where its the worksheet which changes sequentially in the formula rather than the cell ref
I'm looking for some code to change a cell's fill colour
eg. by selecting an individual cell in a range, say A1, the colour of a cell, say K1, in a corresponding range changes to yellow or if I select multiple cells, say A1:A9, the colour of cells K1:K9 change to yellow
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
Attached is my code, pay attention to the bold part. I want the sourceSheet to be copied as a sheet and pasted in the targetSheet (the Sheet2 of "NewBook") but I want it pasted asvalues. Here is the specific part which needs to be looked at...and below is the full code.
VB: Set sourceBook = Application.Workbooks.Open(sourceFilename) Set sourceSheet = sourceBook.Sheets("Current") Set targetSheet = NewBook.Sheets("Sheet2")
On the "Complete Backlog" tab of my workbook, I want users to enter in the requested information based on the column header. Then I would like a Macro attached to a button that says "Refresh" that the user would click after they have entered in all of the information. This macro should look in Column M (WIP Status) and if any of the cells say "Close", it should Cut the entire row from the spreadsheet(Ex. A2:M2) and Paste it into the speadsheet titled "Closed Jobs".
This is so that as jobs are closed/finished, they are removed and stored on a separate sheet. The items would have to be pasted so that it pastes into the next available row - not just on top of each other.
I also need another macro that i can put into a button that doesn't "delete" a row from the sheet, but just copies over to another sheet - so that there are two instances in the workbook.
If would look something like: If a cell in "Column G / Director" of the "Complete Backlog" speadsheet is equal to "Snodgress" then copy columns A-L of the same row to the spreadsheet titled "Snodgress" - of course skipping down the rows to the next blank row.
.....is equal to "Herr" copy row to "Herr" spreadsheet. ....is equal to "McCormick" copy row to "McCormick" spreadsheet. and so on.
I suspect that I can do this with the "Custom list" under "Option", but I need a way to make it more automatic. Otherwise I will write down the whole thing in there instead of making it easier.
Function BG(InRange As Range) Range("InRange").Select With Selection.Interior .ColorIndex = 6 .Pattern = xlSolid End With End Function
That so far but not quite sure why that isnt working. I want to change the fill color with a UDF that all they do is select a Range and it changes those fill colors to whatever the Colorindex may be. I didnt find anything while searching the forums with this already.
I have a code i want to fill down a column, but have the row change to the corresponding row it's on
So for example, the code is '= code128(A7)' on row 7. How to fill it down, but they ALL say (A7) on row 8, i need to change it to '(A8)' and next '(A9)' and so on.
I have a spread sheet with various tick boxes, that when ticked calculate an accumulative percentage in a cell. This cell is the basis of my graph. e.g. if the cell displays 80% - the chart with show 80% - simple.
however, I want to write a vba code that changes the fill colour of the chart depending on the percentage.
i.e. if the percentage data = 0-49% I wish the chart to display as red. 50-69% - yellow and 70%+ = green.
2 Questions here...(Entire macro is at the bottom)
QUESTION 1 - In line 4 of the code below, in Column B, how can I get this code to auto-fill ONLY equal to the bottom-most row with any data in column A? Note that it's never exactly "B254"
QUESTION 2 - How can I change these 3 lines of code...
If I use Conditional Formatting I can only use 3 colors, I'd like to use 8 or 9. Is there another way to do this without using the Conditional Formatting?
