Filling Down A Column Using VBA
Sep 25, 2007
I want to be able to have a macro that will compare one cell to the rest of the cells in a collum. I have used the COUNTIF() formula and it's getting on my nerves a bit because it seems as though everytime i sort the data, it totally messes up the formula (as in it changes the cell refernces to seemingly randomly generated numbers, but that is a different matter! lol). here is the formula, and it will be followed by the formula that is in the cell directly below it: =COUNTIF(F2:F65536, F2) and the one below it: =COUNTIF(F2:F65536, F3). Only one number needs to change, but when i fill down in excell, it wants to add one to every number, even when i click COPY cells... oh well. So i want to write this macro that will do just that. That way, it has fixed reference parameters e.g. F2:F65536, and one variable parameter e.g. F2, F3, F4 and so on. I'm not too savvy with this whole VBA stuff... the university insisted that everyone uses C++ nowadays, lol. I would like this macro to output its data into an adjacent cell ex. if F2 was compared, the data will be placed in H2.
View 10 Replies
ADVERTISEMENT
Feb 2, 2012
If column B is not empty, I want the corresponding cell in the same row of column A to contain the value "1".
View 9 Replies
View Related
Sep 26, 2006
In my worksheet I have a column with the number 1 in cell G3 ,I want to fill down the column with the number 1 as far as there are rows that have text in them. How do I tell Excel to fill down only as far down as the end of my table.
I would like to run this in a macro.
View 3 Replies
View Related
Jan 25, 2010
Is there a way to fill all rows of a column with the same formula without having to copy and paste it? My table is huge (about 6000 rows) and I need to perform the same computation on each row.
View 8 Replies
View Related
Apr 8, 2008
I have a column of data with various values and a bunch of blank spaces. Essentially I want to leave the values as is but fill in the blank cells with a number. I’ve written a loop to do this in VBA, which grabs the value in the cell above, but it’s somewhat slow. Is there a more efficient way to do this?
Sub Downfill(Max)
'
'This count variable is used to run the loop
Dim i As Long
i = 1
Do While i
View 9 Replies
View Related
Apr 28, 2014
I am trying to fill a column with a number series starting with 1 whenever a value changes in the adjacent column. So for instance I am trying to do something like this :
87 1
87 2
87 3
88 1
88 2
88 3
88 4
89 1
89 2
90 1
91 2
92 1
92 2
92 3
92 4
92 5
92 6
View 6 Replies
View Related
Mar 5, 2008
I am trying to auto-fill a column based on certain criteria - in other words, fill in blank cells based on a cell above, just a little more complex version. I have added an attachment to give everyone a visual of what I am describing and then maybe this explanation will make a little more sense.
First, if you open the attachment, the left hand side is a small example of what I have. The middle is the condition. And the right hand side is what I'd like to see happene.
In the example, I am matching up a time and when I hit that time, I am adding on a certain number of miles per hours based on the condition and the cell above. Meanwhile, I am filling in the blank cells with the condition until the condition changes. So a cell is incremented based on the condition and gets its value from the cell above.
View 14 Replies
View Related
Nov 8, 2003
I have a spreadsheet that will eventually consist of tens of thousands of rows. Several columns contain formula's. Rather than having to "highlight" a cell and then "drag" all the way down the column over thousands of rows before finally using the "fill down" function I am needing a method to short cut this process?
Is there a function that allows you to, say, nominate a range of cells that you can fill down over? For example, starting from the last row with data entered into it down to say row 12500 i.e. D22:D12500.
View 8 Replies
View Related
Jun 27, 2007
Is there a way that I can make a macro that populates ComboBox1 of sheet 1 with the values in the B column, where the number of elements in the B column might be any value?
For example, if there are values in B2, B4, and B8, I want ComboBox1 to show those three values.
View 9 Replies
View Related
Sep 1, 2009
I have 6,000 rows of check detail. The check number is listed in both columns B & C.
If the check paid multiple invoices the check number is not repeated in columns B & C.
I would like to fill the cells in those columns with the appropriate check number. Data looks something like this-
item ck_01 ck_02 vendor ck_date
1 10100 10100 ABC 09-01-09
2 10101 10101 ALLIED 09-01-09
3 ALLIED 09-01-09
4 ALLIED 09-01-09
5 10102 10102 BEACH 09-01-09
6 BEACH 09-01-09
7 10103 10103 CAP 09-01-09
8 10104 10104 DART 09-01-09
How can I fill the balnks with the check number (above)?
View 9 Replies
View Related
Dec 22, 2008
I have two worksheets. One that contains material pricing and another that has misc data, formulas, etc. I have 100 rows of data with 2 columns. Column A I have numerical values. Column B I have a formula =(A1/36.4)*sheet1!C7. I try to drag down the formula but the value for sheet1!c7 changes as I go down (sheet1!c8 then sheet1!c9 and so on). How can I drag down the formula and have the SINGLE value from worksheet 1 carry to all rows?
View 3 Replies
View Related
Mar 1, 2012
I need a VBA macro for filling the blank cells in whole column "D" with some conditions.This condition work for whole column.
ABCDCN
EA
Polymer
DE
MA
Polymer
Medium
CN
EA
Polymer
Fill the blank cell in D column with "Easy", if Column A is "CN" and column B is "EA"
Fill the blank cell in D column with "Medium", if column A is "DE" and column B is "MA".
After Run the macro:
i.e
ABCDCN
EA
Polymer
Easy
DE
MA
Polymer
Medium
CN
EA
Polymer
Easy
I was used "if" condition but I can't able to run.
View 2 Replies
View Related
Nov 20, 2012
I have an excel sheet with 2 tabs. 1st tab provides the data for downtime of a manufacturing line. The last column (shift) is blank and needs to be filled based in shift schedule in tab2
On the 2nd tab I have the shift schedule, which tell which shift is working on particular days
Month
Date
7:00am- 7:00 pm
7:00pm - 7.00am
Feb
1
Shift A
Shift C
[Code] ........
Is it possible to write a macros that will look at the Date and time from tab 1 and assign the correct shift number in the shift column. For example the 1st row of tab 1 reads (Month=Feb, Date = 3:55:59 AM) so according to shift schedule it would fill C shift.
I have lots of data and to assign every event to shift # manually is not possible. So i wanted to know if there is a macros i can use to make life easier and learn at the same time
View 2 Replies
View Related
Dec 12, 2007
Works fine up to and including .List(i, 9) however when it bangs out with an error when it gets to .List(i, 10). Error Message reads: Run-Time Error '380': Could Not set the List property value.Invalid Property Value. If I Switch to using .column(10,i) I get the same error but for column instead
Dim cnt As New ADODB.Connection
Dim rst As New ADODB.Recordset
Dim strSQL As String, HASH As String
Dim D1 As String, D2 As String
Dim i As Long
HASH = Chr(35)
'*********TEMPINFO********
D1 = "12/3/2007" '*
D2 = "12/9/2007" '*
Agent = "Team_Stats" '*
i = 0 '*
'*************************
glob_DBpath = ThisWorkbook.Path & "databaseTS-Stats.mdb"
glob_sConnect = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=" & glob_DBpath & _
"; Jet OLEDB:Database Password=********;".......................
View 5 Replies
View Related
Feb 12, 2014
So I have exported a canned report showing me payments by day and it is EXACTLY what I need EXCEPT the dates don't repeat (and it has spaces and some headings but those aren't a big issue). Anyway, I need to dynamically fill in these dates for an entire year.
To be clearer, column A starts off with 1/1/2013 and column B has payment amount, column C check number, D invoice number etc.
But the rest of the cells in Column A for 1/1/2013 after the first row are blank until you hit the payments for 1/2/2013. Then 1/2/2013 is listed once and then blank (or junk header data at a page break) until 1/3/2013 and so on. And of course there are different numbers of payments for each day.
I'm looking to dynamically fill in the dates so that I have a real data /flat file that analysis can be run on. I have some ideas ... Could probably incorporate a "do until" statement somehow...
View 2 Replies
View Related
Feb 14, 2010
I’m not even sure I can do this- but- I want to be able to have a few columns, 3 of them I want to be Item #, Item, Cost.
Is there a way to put the Item # (Number) in, then have the other 2 automatically come up?
View 9 Replies
View Related
Jan 18, 2013
I have a table of information on a worksheet and one of the columns determines whether the item in that row is active (there will be active and inactive items in this "Main List")
On a seperate worksheet (in the same file) I want to only display the active items in a new table (Overview) and always ensure it has no empy spaces other than at the bottom of the list, so if row 1/2 in the Main List are inactive items then the first row in the Overview List would display row 3 from the Main List.
Ideally I would rather do it in a formula than VB if possible.
I've attached a file showing what I am trying to explain, where the Overview tab currently has the data typed in it should automatically populate based on column "I" on the MainList tab.
example.xls
View 2 Replies
View Related
Aug 3, 2009
I m looking to fill down a column where I am assigning a number that maps to a certain week of the year. In essence after every 7th value the number should increment by 1.
Date Day ConsumptionWeek number
1/01/2009Thu 827 1
2/01/2009Fri 907 1
3/01/2009Sat 1,013 1
4/01/2009Sun 1,051
5/01/2009Mon 1,097
6/01/2009Tue 1,155
7/01/2009Wed 1,044
8/01/2009Thu 976 2
9/01/2009Fri 1,034 2
10/01/2009Sat 1,107
11/01/2009Sun 1,073
12/01/2009Mon 1,161
13/01/2009Tue 1,395
14/01/2009Wed 1,172
15/01/2009Thu 1,060
16/01/2009Fri 1,008
View 5 Replies
View Related
May 1, 2009
I fill mentioned data by Qty values in Sheet2?
Sheet1
ABCDE1NameLogQtyCodeZop2A140005RFG-13B150001RFG-14C980003RTH-1
Excel tables to the web >> Excel Jeanie HTML 4
Required result like this.
Sheet2
ABCD1NameLogCodeZop2A14000RFG-13A14001RFG-14A14002RFG-15A14003RFG-16A14004RFG-17B15000RFG-18C98000RTH-19C98001RTH-110C98002RTH-1
Excel tables to the web >> Excel Jeanie HTML 4
View 9 Replies
View Related
Nov 12, 2009
im filling out a worksheet.
on the rows i have this data ex. (123467.00) is there a way i can format the cell so the final product is this ex. (1234.67).
i've tried may things but what i get is (123467)
i have multiple worksheets like this just want something that can do automatically instead of manually.
View 9 Replies
View Related
Feb 24, 2010
How can you fill up a listbox on a form with data from a couple of cells.
For example you have the worksheet Colors and you have these values in the cells of column A
A1 = red
A2 = yellow
A3 = blue
Now I want red, yellow and blue to be in the Listbox.
View 9 Replies
View Related
Jan 31, 2007
I have searched the site but cannot find an appropriate solution. I have a list of names in column a, some of the names are repeated if the name is repeated then at each occurence of the name I would like a '1' to be placed next to it in column B.
I am trying to adapt the conditional formatting formula:
= COUNTIF($A$1:$A$25,$A1)>1 and then I guess I need to add a '1' else ' null' command but I just can't seem to get the syntax correct.
View 9 Replies
View Related
Jul 22, 2014
I have a workbook where one worksheet is referencing cells from another worksheet. I need every third cell to pull from every single cell on the other sheet.
I have found on other threads that =INDEX('WORKSHEET!B:B, 1*(ROW($B$4:$B$4)+1)) worked. However when I filled down it wont increase the row reference.
ie.
=INDEX('WORKSHEET!B:B, 1*(ROW($B$4:$B$4)+1))
=INDEX('WORKSHEET!B:B, 1*(ROW($B$4:$B$4)+2))
=INDEX('WORKSHEET!B:B, 1*(ROW($B$4:$B$4)+3))
[ATTACH]334142[/ATTACH
The other threads mentioned it should fill down fine, but not working for me.
View 4 Replies
View Related
Jul 22, 2009
I'm working on some data dealing with time fields, and I need to have them counted in 15 minute intervals.
For example, one of the entries listed in a column has an event starting at 02:25:00 and ending at 02:55:00 (30 minutes). Along the top row are times listed in 15-minute intervals, e.g. 13:00:00, 13:15:00, 13:30:00, etc. In the corresponding cells, if the entry took place within a particular interval, I need it to say "1", otherwise have it say "0" or "-" or something denoting no event.
An IF statement was used, but it didn't seem to work.
If that's a little hard to follow, check the example attachment for a better idea of what I'm trying to describe.
In the example spreadsheet, Row 2 (manually typed in) is what I'm looking for. Row 3 is the (failed) attempt to use the IF statement.
View 14 Replies
View Related
Oct 13, 2009
I have to validate cell text are (1, Absent, 2,leave, 3 present, 4 late 5 no report)
at the same time Absent should filled by, red leave by pink, present by green, late by yellow and no report by blue.
Preferably I dont want to use VBA. I am using excel 2007 but I am not excel expert.
View 7 Replies
View Related
Dec 9, 2012
Not sure if this can or would be done in vlookp??. In my example the print page needs to get data from a list where people set.
View 3 Replies
View Related
Oct 30, 2013
I am working on an inventory sheet. Its probably only complex due to the amount of data. There are several hundred locations we service and these are in a single column, and then there is the equipment we use that is several hundred columns.
Each location uses 3 rows and the 1st needs the formula to equal 2 rows beneath it. i.e. cell E28 has the formula =E30. I basically need to fill down, but only put that formula into every 3rd row, as the two rows beneath this row need to stay blank, or show number i manually put into either.
The second part of this, is there a way once that is done, to just select those cells, and fill to the right all the way? Again, i do not need to fill the two rows under that one.
I have attached part of the sheet .....
The green cells are the ones that need the formula, and those will be copied down, and right. the others need to be left alone. I have been sitting here for an hour manually entering in the =XXX for each cell.
View 4 Replies
View Related
Feb 17, 2014
I got a list with numbers on Sheet"Bookings"
8000
8001
8002
and so on.
When i fill in a name like commission on Sheet1"Freshbooks"
The number 8000 must be connected with that ..so that it will appear on my last sheet "Ouput"
So to summ it up Sheet1 I fill in commision on table H the number 8000 must apear on sheet"output"
Is this possible in a Formule or in a VBA line???
View 1 Replies
View Related
Nov 12, 2008
filling an Array then I have used in this macro?
View 3 Replies
View Related
Dec 5, 2008
I have a userform with a textbox and a combobox
textbox input will be a house number
combobox will be a list of all the street names that have that house number in my database
column Q are house numbers, column R are street names
when a user inputs a number into the textbox and tabs to the combobox,
for each cell in column Q of workbooks("proposals.xls").worksheets("database") that has the textbox1.value I want the cell value of .offset(0,1) to be added to the combobox.
View 10 Replies
View Related
