Filter Zeros From Drop Down List
Jun 25, 2008
I have a table that uses vlookup on its bottom row to pull data on a person that the user selects from a drop down list. I am trying to get it so after that a second list is produced in dropdown form that allows the user to select the data pulled about the person.
The data pulled on the person is very dynamic and dependent on other stuff the person has selected. For example the third value on tom could be anything from 1, 5, or "". I am not sure if this is why "Ignore Blanks" isn't working.
It is possible by the way i have everything set up for me to make any result I do not want to show up to display as 0 or any other value besides 1/2/5/7. Is there a way filter out the zeros so my drop down isn't riddled with blanks?
View 7 Replies
ADVERTISEMENT
Mar 19, 2009
I'm trying to create a drop down list which returns values based on what has been selected in the previous drop down list in the adjacent cell, e.g. if 'Apples' is selected in the previous cell then you should only be able to select from 'Gala, Granny Smith', or if 'Oranges' is selected you should only be able to select 'Seville, Blood Orange'. Is there a formula which would do this, or can I use a pivot table somehow? I'm totally stumped.
View 2 Replies
View Related
Oct 26, 2009
I need to have a drop down list which displays a different set of values depending upon the value selected by a previous drop down list. ie. (drop down box 1)= x, y, z. (drop down box 2)= either x1, x2, x3, or y1, y2, y3, or z1, z2, z3. I can produce a single drop down box thats not a problem but linking several drop down boxes is beyond me .
View 4 Replies
View Related
May 12, 2009
Here's my problem. I need a formula to take the decimals out of a column but keep ending zeros. I have tried find/replace & several formulas but nothing seems to be working. Here is an example of the numbers in the column and the end result I need.
9.66 966
0.50 050
13.09 1309
309.98 30998
View 9 Replies
View Related
Dec 9, 2009
I have a drop down box in column N, however I would like the options in that drop down box to change depending on what appears in column M.
If column M Says "Lapse" then I want one drop down box to appear in column N, If coumn M says "NTU" then I would like column N to show different drop down options.
View 12 Replies
View Related
Sep 29, 2011
Im trying to filter a name range of 12 columns in vba. However im able to emit ZEROS but NOT blanks when i usse AutoFilter Field:=12, Criteria1:="0" it stil contains some blanks in the filtered data
View 1 Replies
View Related
Jan 22, 2009
I have a spreadsheet with a single worksheet. This worksheet contains 1200+ rows of equipment. Each row of equipment is made up of 4 columns: the equipment name, then the department (made up of sections), section (made up of teams) and team (a few workers) responsible for maintaining it.
I have been given the task of making it easy for the departments, sections and teams to identify which pieces of equipment are theirs. I have been specifically told to add a new worksheet to the spreadsheet that contains 3 drop-down menus; you guessed it, department, section and team. The idea is that someone chooses the department, section and team that they work for, then click worksheet 2 and their equipment has been filtered for them. (Some teams come under more than one section or department, depending on the task so I do need all three drop down lists). What I can't do is get a the drop down lists in worksheet 1 to filter the data in worksheet 2.
View 4 Replies
View Related
Dec 12, 2008
I have a created a filter in my workbook. Text for the entire spreadsheet is set to Arial | 12 pt. Font. However, when I select any one drop down list the text therein is shown in a font size that is too small. How can I change the font size to make it more readable?
View 2 Replies
View Related
Aug 29, 2006
I have a workbook that lists a number of customers and the products that they use. I am trying to create a lookup that will follow the following process;
1 - User enters (via dropdown selection) Customer Id
2 - User enters (via filtered dropdown based on the 1st selection) Product
3 - User enters (via filtered dropdown based on the 1st and 2nd selections) Pack Size
4 - Product Id autofills itself.
My problem is twofold, firstly I don't know how to perform the "filters" in stages 2 and 3, and secondly I want to remove duplications from all lists at the appropriate times.
View 3 Replies
View Related
Jan 14, 2010
How do I go about using an advanced filter to filter a list of data e.g.
boat
boat
boat
car
car
truck
and have the filter extract only the boat entries to another worksheet, so on another worksheet I end up with
boat
boat
boat
View 9 Replies
View Related
Jan 13, 2009
I am trying to create a fairly simple spreadsheet with about 8 columns and about 400 rows. One of the columns features a drop-down list with about 8 or 9 different options. Dependant on which option is selected, i would like the entire row to change colour with that option.
For example:
FAILED - whole row changes red
SUCCESSFUL - row has no fill
Tested - row changes to orange
etc.
Is this possible within Excel 2003?
View 9 Replies
View Related
Sep 1, 2006
I have a column with values, say column a. In column a are several rows with values equal to zero. I would now like to create a new list that omits the values that are zero, e.g.:
original list:
23
0
54
76
0
0
new list:
23
54
76
View 9 Replies
View Related
Jan 7, 2009
I am trying to generate a list based on the value of a cell. That list will then be used as the range for a drop-down list. Example: Cell A1 returns a value of 15
A drop-down list displays the values 1 through 15. Cell A1 changes to 20
Drop-down list displays the values 1 through 20. I assume I'll need a two-step macro to accomplish this but I can't figure out the logic to populate the drop-down.
View 3 Replies
View Related
Oct 21, 2013
I would like to reorder a list whilst ignoring any 0 values. I've attached (I hope correctly!) a spreadsheet of what I mean. It's pretty simple, but I've been banging my head over it for a while now!
Sample.xlsx
View 4 Replies
View Related
Feb 7, 2008
I have sub folders with names 0001, 003A, 0032 etc in a main folder. I am using the following code to copy these sub folders name to the worksheet column A. This works well except that folder 0001 is copied as 1, 0032 as 32. How to modify the code so that 0001 is displayed in column A instaed of 1.
Private Sub Workbook_Open()
Range("b3:b6500").Clear
Range("c3:c6500").Clear
Dim fs, F, f1, fc, s, i
Range(Cells(3, 1), Cells(6500, 1)).Clear
parentfolder = ThisWorkbook.Path
Set fs = CreateObject("Scripting.FileSystemObject")
Set F = fs.GetFolder(parentfolder)
Set fc = F.SubFolders
For Each f1 In fc
Cells(3 + i, 1) = f1.Name
i = i + 1
Next
End Sub
View 7 Replies
View Related
Sep 3, 2009
why my drop down list defaults to the middle of the list when first clicking on the arrow that opens the list? I created an alphabetical list of all US airports but when I open the list, it starts at "D" instead of "A" which is the top of the list.
View 5 Replies
View Related
Oct 12, 2009
with the data in the attached sheet, I create several different pivot tables that need show the count of the information in the columns M:DU. My issue is that the data is sent to me from a third party and the columns contain zeros that cause the counts to inflate.
What I would like to be able to do is run a macro that will search out any zeros in M:DU and replace them with a blank cell.
Unfortunately the number of rows increases with every monthly reporting cycle so the macro would need to be able to accommodate for that.
View 4 Replies
View Related
Jan 26, 2009
I need to create a 'sub' list from a drop down list.
I have 8 categories in a drop down list in column A, but i need column B to also have a drop down list of sub categories depending on what category is selected in column A.
And once column B is populated, i need column C to auto populate with a value. All data is stored on the spreadsheet.
View 9 Replies
View Related
Nov 7, 2009
I’ve created a formula for this statistic and I’m happy with the results. Because I’m working with formulas, my only problem is the unwanted zeros. How do I hide zeros that show up automatically (i.e. #3 [blank] and Nov 09-June 10)? I can hide the numbers, but if I enter a zero to one of my future statistics it will not appear and I don’t want that to happen. Is there a way to hide those automatic zeros without affecting my real zeros?
Vendor’s Name
Jul 09
Aug 09
Sep 09
Oct 09
Nov 09
Dec 09
Jan 10
Feb 10
Mar 10
Apr 10
May 10
June 10
1
Vendor1
20
5
15
3
0
0
0
0
View 9 Replies
View Related
May 22, 2008
i have a spreadsheet with several fields. i want to derive information from this data. i want to be able to control the output through the use of list/drop down boxes.
so the user will choose several criteria AND based on this criteria, the ouutput will reflect user requirements.
View 12 Replies
View Related
Dec 1, 2007
I have a workbook with around 35+ sheets on it and I was wondering if its possible if I could put these sheets in a drop down list in say cell A1 so it would be easier to navigate the sheets. Is this possible with out using VBA code if so how would I go about doing it?
View 9 Replies
View Related
Jan 13, 2010
I have a drop down list of shipping Companies. If the name of the company is not in the drop down list how do I allow the user to type in the name then have it save in the drop down list source?
View 9 Replies
View Related
Nov 1, 2008
I currently have a drop down list in sheet 1 and the list is being refrenced from sheet 2
Lets say the drop down list is for fruits and my current list in sheet 2 has 4 items Apple, Grape, Mango, Peach.
Now this is what I need :-
1 ) lets say a user wants to enter Orange (which is not in the list ) he can still do so by entering it manually into the cell.
2) Once Orange is entered which is not in the LIST in sheet 2 then that new name gets added to the LIST in sheet 2 so that next time that name appears in the drop down list automatically. eg Apple, Grape, Mango, Peach, Orange [ but Items should not get duplicated eg Apple, Grape, Apple, Mango, Peach, Apple
View 6 Replies
View Related
Nov 3, 2008
I have Excel 2003 installed on the companies computers. Many people use an Excel file and I am trying to make their work easier. There is on command which has a dropdown list made by me. What I would like to find out is that is there any possibility to make Excel help the user to choose from the drop-down list (the list is quite big). Is it possible to select a cell in this column and type in the cell and then Excel help the user. I mean (this list contains country names in abc order) if the user types S and W then Excel auto-corrects it to SWEDEN. Can this be done with Excel 2003?
View 2 Replies
View Related
Dec 11, 2008
I do not know how to create a drop down list to ensure the user inputs only the values from that list. Once I figure this out I would love to add a drop down calender for a cell as well.
View 14 Replies
View Related
Jan 6, 2009
im trying to create a spreadsheet for different makes of cars, here is what i want to do.
in cell one i want a drop down list for various makes of cars, in cell 2 i want another drop down list for the different models from that manufacturer (depending on which on I choose in cell one), in cells 3 and 4 I want different information depending on the make an model of the car. I have got 1 sheel with all this info on it but I dont know how to make it all work nice and neatly with drop down lists.
View 10 Replies
View Related
Jan 23, 2009
i m kinda playing with the drop down list and i decided to make a list about the nba teams.
heres the breakdown:
1st row
conference: east/west
2nd row
east: ATLANTIC/CENTRAL/SOUTHEAST
west: SOUTHWEST/NORTHWEST/PACIFIC
3rd row
the teams list is next.
now ive learned how to do a drop down list but i cant find a way to filter the 2nd row. i hope you can gimme some tips or ways on how to go over this. i tried data>filter but thats not what i need.
here is an attachment and i used sheet 1 for the input and sheet 2 for the list of the selections.
View 7 Replies
View Related
Feb 21, 2009
I have created a drop down list as follows
Whiteboard 16mm
Colourboard 16mm
Colourboard 18mm
Veneer 18mm
Veneer 19mm
Veneer laid up 40mm
Painted 16mm
Painted 18mm.
When I select one of these items I need CELL A1 to return just the thickness. EG: I hit dropdown list and select Whiteboard, CELL A1 then displays 16mm. Or I select Veneer laid up and it displays 40mm. I would imagine this formula would be quite long as I would have these 8 items in it.
View 3 Replies
View Related
Apr 5, 2009
I have a form with 2 columns. in the 1st, we have the product and in the 2nd, we have the price.
I have my drop down list for column1 but I want column 2 to show the correct price when column 1 has a product.
View 4 Replies
View Related
Aug 7, 2009
in the attached spreadsheet I have multiple sheets. On the tab "Tech IDS", column A is named "Name" and column B is the tech ID that is associated with the name in column A. Column B is validated as List=Name. Now under the tab "CAL Form" under Column A I need to type the tech's name. Now under the tab "CAL SHEET TEMPLATE" the name that I typed corresponds with a given cell (i.e. B2='CAL Form'!A2). Notice though that I2 does not give a tech id b/c of DV dropdown list meeting its limit. Look at I68, Bob's id appears b/c he fits within the limits. My question is... how can I still use the list with more names or can I modify the formula (=INDEX(ID,MATCH(B68,Name,0))) to include another Match search?
View 4 Replies
View Related
