Im trying to filter a name range of 12 columns in vba. However im able to emit ZEROS but NOT blanks when i usse AutoFilter Field:=12, Criteria1:="0" it stil contains some blanks in the filtered data
View 1 Replies
How to get the small value excluding zeros?
small(Convention!$I$3:$I$1000,rows(Dashboard!$D$41:$D41))
I have a list generator that creates a set of data in a multi-column & row dataset. I would like a formula to create a list of the alpha data points only which excludes blanks and any errors.
Example:
AADD
#N/A
BB23EEFF
#N/A
#N/A12GG
CC
Results:
AA
BB
CC
DD
EE
FF
GG
I need to populate a cell with a dropdown list via data validation. The source is a list that contains blanks both in between data and at the end of the list. Like this:
John
Peter
(BLANK)
Ann
(BLANK)
Carol
(BLANK)
(BLANK)
(BLANK)
etc.
The blank cells are actually not empty, but contains formulas (and I therefore assume I cannot use COUNTA for leaving them out).
Anyone knows how to create a source list for the data validation dropdown list that leaves out any blanks (containing formulas) in the middle and the end of the range?
I used each of the following codes for dynamic name ranges.
View 4 Replies View RelatedI am having 2 problems with dynamic named ranges. On one hand, I am getting a LOT of duplicates in some ranges and a lack of entries in those ranges that have too many blanks. Here is a sample of the dynamic named range in the first column:
This first range is called "NamedRange_1"
=OFFSET(Data!$A$2,0,0, COUNTA(Data!$A:$A)-1,1)
how to eliminate both the duplicates and the blanks?
I have pivot table that is pulling data from a page that is using the vlookup formula. I would like the table to only include fields that have data in the count. However, the pivot table is registering cells that have "0" (i.e., there's no actual data in the cell it is pull from) as having data. How can I get the pivot table count to ignore these cells?
View 1 Replies View RelatedI have a list of numbers that I want to average. Problem is, some of the numbers contain zeros and i want to exclude these entries.
So, if I had a list of 6 values and 3 were zero, I'd want to sum the list and divide it by 3 (not 6).
I have listed occupations and name ranged them as "Min". with the vba code on how to filter Column E with the Named Range "Min"
View 9 Replies View RelatedHow can I copy a range and paste it excluding the lines with a zero value. The sample attached explains it better.
View 6 Replies View Relatedim trying to average over a number of work sheets to determine the avergage talk time of employees over a day, ive tried:
View 14 Replies View RelatedI current have an Excel doc that I am trying to pull averages from. Every row has data that needs to be averaged but I only need every other cell. And I cannot have zeros in the average because it will skew the data. Also if the average for a row ends up being 0, I want that average to show up as 0 not #DIV/0!. From Column H to EE I need to average each row individually.
I came up with the below formula.
=IF(SUM(H1:H1:J1:J1:L1:L1)=0, "0", AVERAGEIF(H1:H1:J1:J1:L1:L1, ">0")
It works but Its not practical because I have to manually enter all of the cells that it pulls from.
I have a one column of numbers...let's say consisting of six rows
the following numbers 12,0,14,25,0,9
if I average this it comes out to 10
how can I average the same rows but exclude the zeros in the outcome(is there a formula to do that?)
I would like the answer to be 15.....I still need the zero's in the rows however
I have a column with values, say column a. In column a are several rows with values equal to zero. I would now like to create a new list that omits the values that are zero, e.g.:
original list:
23
0
54
76
0
0
new list:
23
54
76
I have inherited some legacy templates (Standard, Leave and Exception) which cannot be changed. I need to summarise them (Total) selecting the earliest start and the latest finish. (Sample attached). The templates are 90 columns wide and about fifty lines deep so named ranges isn't practicle (I think). I'm running 2003.
View 4 Replies View RelatedI have the following formula which works perfectly unless one of the cells has a value of zero;
=MIN(SUM(AD13),MIN(SUM(AK13)))
When AD13 = £60.00 and AK13 = £94.00 (or vice versa) the formula returns £60.00, which is correct. BUT when AK13 = £0.00 obviously the formula returns £0.00, but I would like the formula to still return £60.00.
How this can be done?
Project: x
Activity: xActifity TypeReference FormDec-11Jan-12Mar-12Apr-12May-12Feb-12Mar-12W/EW/EW/E2-Mar9-Mar16-Mar23-Mar30-Mar6-Apr13-Apr20-Apr27-Apr4-May11-May18-May25-May77%91%91%R/S95%100%100%R/S100%100%100%100%MMMM100%71%71%R/S100%100%R/SMMMM97%81%100%R/S100%MM100%R/S75%85%R/SR/SMM100%100%96%Average
Basically what I want to achieve is the average % of Dec 11 (D11:D22 on the sheet im working on) scores but excluding any blank fields (not excluding potential scores of 0%)
I need a spreadsheet to record the number of calls taken by my staff YTD, and have it laid out as follows:
Column A Column B Column C
1 Date Calls Taken Increase
2 01/01 10
3 02/01 13 3
4 03/01 19 6
-19
etc.
The "Increase" is a simple =B4-B3 etc. But, there is a problem...
Say for example a member of staff is ill one day and therefore doesn't take any calls, I end up with a 'blank' cell in column 'B'...
Column A Column B Column C
1 Date Calls Taken Increase
2 01/01 10
3 02/01 13 3
4 03/01 19 6
5 04/01 -19
6 05/01 25 25
My problem is the increase in calls from 03/01 to 05/01 YTD ISN'T 25, it's 6.
Is there a formulae I can use that works out the difference between the latest number of calls taken and the last number of calls taken (excluding the 'blank' cells)?
Formula to count the number of consecutive zero starting from the last cell with non zero value.
View 14 Replies View RelatedI have an Excel Charts with monthly balances entered. I need to delete all the values $0.00 of which there are many. I have tried to use the find and replace and also i tried the method explained in the Excel level 1 free training.
View 9 Replies View Relatedi am creating a football prediction sheet, and have a problem where blank cells are treated as zeros.
The enclosed spreadsheet shows the formulas in green working fine, but the blanks are treated as zeros in cells j6, I7 & J7.
I am working on a large spreadsheet (done by somebody other than I) that has a lot of vlookups and IF commands. If it sees that there is nothing present in the lookup, then it simply returns a blank cell. I could do with it showing a zero instead of the blank cell. The cell appears not to be empty and I am not familier enough with excel to get it to do what I want.
This is a typical forumla that either gives a figure if something is present, or simply returns no data / text but excel doesn't see the cell as empty.
=IF(ISERROR(VLOOKUP($A25,'Jul 09'!$B$1:$C$2000,2,FALSE/100))," ",(VLOOKUP($A25,'Jul 09'!$B$1:$C$2000,2,FALSE/100)))
Is there anything obvious from that formula that can be modified, or is it a much deeper problem?
Is it possible to run Range("A64000").End(xlUp).Select and have it skip the blanks and zeros until it hits an actual number?
View 9 Replies View RelatedI have a sheet to analyze football(soccer) scores. But when I count the zero scores (no goals scored) across a range blank cells in the range are counted as zero, which I don't want. Is there any command I could put with the formula to tell it not to count blank cells as zero or just not to count blank cells at all? The sort of formula I use is {=COUNT(IF(H103:H559=0,(IF(I103:I559=0,1))))}
View 9 Replies View RelatedI am trying to make a excell spread sheet that will calculate my students averages for the year. I need to account for zeros in the coarse and I want this excel sheet to track the current average all year long . So I do not need to include my blanks in the average as I go. Also , how do I formulate my average accum to show this formula - Test scores, four of them count as 80% of the total grade. So each test is worth 20% / Lab 10% of total grade and homework is additional 10%. I downloaded the templete from MSN and have tweaked it to my liking except for the coding above. Please advise. I am a below par on Excel. My attachemtn is below of my templete. One note. the templete gave me the room to include 13 ros of homework - but I will not necessarily use all of them... I can make it one row for home work only ....
View 9 Replies View RelatedAttached is an xls with my formulas and problem. We need a way to factor in zeros in grading student workers. However, we also need a way to omit blank or null cells if the workers did not do a particular project. The formulas currently in the sheet compute zeros for both scenarios, lowering the overall 'grade' for workers who didn't do a project compared with workers who did the project but got a '0'
View 8 Replies View RelatedI have run into a problem with the array formula. After inserting formula with the CTRL+SHFT+Enter it is giving me the same sum to the 3 cells that I had array formulas in but trying to capture different data from what was in the capturing column. Example:
If row F consists of text types: Move-in, Mid Year, and Year End as potential options,and row G is the score for that text type(cells will consist percentages), give me the average of all the cells in row G that are specific to Move-In only, but don't include the blanks in the average.
My existing formula isn't designated to exclude the blanks. how to exclude blanks and how to get it to stop giving me the same result in the three separate cells. My current formula is as such: {=AVERAGE(IF(F2:F73=E76, H2:H73))}
I have a named range of values on Sheet2 (GPI). Sheet1 is an OLAP pivot table containing row label (GPI 14) and values (Net Rx Count) only.
Unfiltered this list is over 7,000 rows. I need VBA code to display only those rows where the GPI 14 value matches any value in the named GPI range on Sheet2.
In other words how can I display the select rows without manually selecting the items of interest AND without manually hard coding the values in the code as they will change.
Below is 1 of the many codes I tried. This appears to be the most intuitive but I get an 'invalid procedure" error at Set my PivotTable...
'Sub PivotAnalysis()
'
Dim myPivotTable As Excel.PivotTable
Dim myPivotField As Excel.PivotField
Dim myPivotItem As Excel.PivotItem
[Code]....
Instead of treating cells with a blank or a text value as zero in a line graph, how can I create a gap in the line?
View 6 Replies View RelatedI have a set of four pivot tables on a sheet that I need to programmatically change a Report Filter (Page Field) so I can create sets of reports in an automated fashion. This will be the first step in that process. The change will involve choosing > 1 Role each time the code loops through based on Named Ranges I've defined that are associated with that Role.
My code thus far:
Code:
Sub TestCode()
Dim pt As PivotTable
Dim pf As PivotField
Dim pi As PivotItem
[Code]....
emm_dc_gsr is one of many Named Ranges that will contain a variable number of elements. Just using the one right now to see if I can get the code to work, I'll eventually make another Named Range/Array of all them so I can loop through each Report ("ReportPick").
I want the Report Filter to consult that Named Range for its values and apply those values to PivotField "Role" that is used as a Report Filter.
When running this code above, I get a "Role" Field that says "All" but no values (the table is completely blank), with no evidence as to why it'd be blank (all filters in every Report, Column and Row are working normally and are filled in). When I choose a value manually after the code is run, the pivot table values populate. Do I need to somehow index the Named Range in that loop? I'm just confused about this step right here:
For Each pi In pf.PivotItems
If pi.Value = RolePick Then
pi.Visible = True
Else: pi.Value = False
When I've run other versions of the code, I've gotten an array version of it to "work" using LBound and UBound, but it never chooses the right two values even though those are verified as stored in the array via a pass-through. It chooses the first few values in the Report Filter.
Here's the corresponding code for that:
For i = LBound(myArray) To UBound(myArray)
pf.PivotItems(i).Name = myArray(i, 1).Value
pf.PivotItems(i).Visible = True
Next
I do not care if I use an array or a Named Range. I just want something that is simple and works. Passing the values directly from the named range seems easiest to my brain, but I'm open to anything and I'm clearly missing something (probably silly).
I also have no idea why " .AutoSort xlManual, .SourceName, .EnableMultiplePageItems" is necessary though every piece of sample code I've seen seems to have some variation of it.
(Using Excel 2010, Windows 7.)
