Setting Filtering Across Multiple Sheets?
Jul 31, 2013
I work with project data.... I have attached a small sample. I will have data across 8 - 10 tabs with respect to costs associated with different projects.
What I do now is go through each tab and set filters based on what project and date range I am looking for ... if I am not careful, there may be other filters previously set that I do not notice and my data isn't accurate and I may spend quite a bit of time reviewing all the filters and resetting as needed.
But, the filtering will be the same across all tabs (i.e. I may want to see all project data for a single month, or I may want to see all project data for a single project across all date ranges.)
is there a way to create another tab which I can identify the desired filtering than can populate across all the tabs? not all the tabs contain the same number of columns of data, but they do all contain some similar columns that represent the typical filtering range.
View 1 Replies
ADVERTISEMENT
Aug 28, 2013
I have about 9 different sheets, but they all will have 4 types of graphs (totals, comparison, bydate, trend). I am writing vba to conditionally show one type of graph on every sheet. For example, if I want to show the totals graphs, I want all of my sheets in the workbook to update. I can already make the graphs go invisible and visible on one sheet, but I would like to do so on all sheets. Here's my code now:
Code:
Sub UpdateGraph()
Sheets(".graphManager").ChartObjects("Totals").Visible = False
End Sub
[Code]....
But no luck. I do not want to manually type all the sheet names into an array because I may add more sheets in the future and don't want to keep changing the code. How can I loop through all sheets and set a graph named "Totals" to invisible? Or can I just set all graphs in the workbook named "Totals" to invisible without looping through the sheets?
View 3 Replies
View Related
Jan 23, 2007
I have a workbook that has a sheet for each day of the month. The data on all of these sheets is formatted the same. I have a sheet that is an "overview" sheet. I want to be able to use a filter function (like autofilter does) but have it filter across all of the sheets and display the results on my Overview sheet.
View 3 Replies
View Related
Apr 26, 2013
I am doing a project with these instructions:
The state, capital and population of all states with a population greater than 10 million or less than 1 million. (population)
The state, tree and bird of all states with a bird or tree that starts with Eastern or Western (symbols)
The state, population and area of all states with area between 100,000 and 200,000 (area)
I am having troubles with selecting just the three criteria (state, capital, and population) on my Population worksheet. Attached is my work. The copied filter keeps copying all of the data in the data set, and not those three.
View 4 Replies
View Related
Mar 4, 2009
I have requirement wherein, I have to put filter conditions on two separate columns in the same sheet & putting hard coded value eg. "XYZ" in third column for this selected range. I am using macro autofilter but its giving me errors for multiple filters.
View 9 Replies
View Related
Jul 5, 2014
I want the following script to:
1) Find and define a range ("DateRng") based on cell values. This is controlled by the first block and the script does this job correctly.
2) Find cells
View 1 Replies
View Related
May 29, 2014
I have started to use excel again because I need to create a spreadsheet for maintenance hours done on a vessel. The problem I have right now is, how to set a rule to allow only certain multiple of a particular number to appear. For example,
I have a initial cell value where I have to manually insert the total number of hours that have gone by in the vessel. Let us say that this value is 500 hours.
In another cell which is labeled, "Last Completed", it would have to read at how many hours this job was last completed.
I also have another cell which gives you the time interval before the job is performed again. This value is 250.
So if the current number of hours is 500, the last completed date should be 250. (assuming Maintenance was done at 0 hours and 250 hours).
How do I make it so that the "Last Completed" cell would read 250 until I hit 750 hours which at that point should read 500 Hours.
View 14 Replies
View Related
Jan 28, 2008
I am trying to filter three columns of data to a given range without having to using auto filter on each column. I would like to have a Macro or Control Button or something easier than picking each set of data each time I want to filter.
Attached is a sample file.
I am not well versed in Excel and this is my first post so please bear with me in this process.
View 14 Replies
View Related
Dec 3, 2008
I have a raw data page which contians peoples name and where they charged thier time. My problem is that I only want thier name to appear once. What type of formula do i need to use to make this happen.
Ex
Employee name Project No. WBS Code Hours
John Smith 123456 1 4
Jane Doe 123456 1 2
John Smith 123456 2 2
Jane Doe 123456 2 1
John Smith 123456 3 2
Jane Doe 123456 3 5
At the end I want to do a count to let me know how many people I have charging the job but I don't know what formula I need to exclude duplicate entries.
View 4 Replies
View Related
Sep 9, 2009
I need to find the total $ collected on repair orders that contain customer pay and warranty repairs. The problem is that C and W show up on differerent rows, if an RO has 4 lines 3 may be c and 1 line w. I don't know how to use pivit tables to get the info I am looking for, or if that is the best way to fnd my answer.
View 8 Replies
View Related
Mar 20, 2013
I need to filter 20 out of 100 text values (3 letters each) in a table.
The 20 values are listed in a separate column and I don't know how to filter by that range without manually selecting all of those 20 in the filter?
View 3 Replies
View Related
Jul 28, 2008
a formula in excel. here's what i need to do:
column A has the names of deffirent drivers (ex; john, peter, james)
column B has start time (9:00, 10:04, 11:08)
column C end time (9:14, 10:16, 11:23)
i need a formula that will take all the "john" from column A, do column c - column b for the time it took and then do an average of all of john's attemps.
View 10 Replies
View Related
Nov 18, 2008
So I've tried this a few different ways and every time I get the 1004 error: "Unable to set PrintArea property of PageSetup class"
Basically I have a macro that goes through a workbook to hide certain rows and columns based on some user inputs. After doing this I would like to set up appropriate print areas on certain sheets so that when you go to print anything it comes out clean. I thought this would be easy but I'm stuck.
The Plans variable in the code below is an integer from the user input. Think of this code as grabbing two separate boxes and setting them as print areas, which I've know I can do manually because I've tried it.
What's wrong with the following code?? (I've also tried using the union function here, to no avail)
View 6 Replies
View Related
Jul 30, 2014
I have a workbook that has the main user interface on sheet3 and the main database i'm trying to filter on sheet2. Sheet3 has the button that executes the code to open the worksheet with the database and filter based on certain criteria and will filter unique id if a numeric value is entered and surname if text is entered.
Originally this worked ok when i had the button and the' rcrit' cell reference on the same worksheet as the database i'm trying to filter, but i decided to move them to the interface page as it was interfering with other things i'm trying to do.
Ever since then i can't seem to edit it to make it work from the other page! I've tried changing the filter ranges to reflect the new set up, but it seems to no longer be able to recognise numeric/none numeric values.
here's the code I'm using.
VB:
Sub filter()
Application.ScreenUpdating = False
Dim rCrit1 As Range
[Code]....
View 2 Replies
View Related
May 2, 2013
I have a database with 10 properties of a certain kind of material #.
IE: Material 1206 is Black, SG is 1.2, Duro is 70, Cure, tensile, price, etc.
I want a user to select 5 criteria from a drop-down list and have the 6th drop-down box populate available materials that meet the previous 5 criteria. I am trying to do this automatically and avoid user trying to autofilter (have to make it easy). I've extended the database out to show either a "0" or "1" if the 5 criteria match, but I can not get them into a drop-down list with a formula due to a #REF! error. I am not sure where the circular reference is coming from or what I have to do to change it.
View 1 Replies
View Related
Nov 24, 2013
Is it possible to create a data base with the given sample below?
COLUMN A
COLUMN B
COLUMN C
COLUMN D
COLUMN E
UNIT TYPE
CONDITION
NAME
TELEPHONE NO.
DATE
1+1
SALE
Name1
tel1
3-Oct-12
[Code] ...
The Userform has 2 ComboBoxes and 1 ListBox
ComboBox1 will be the one of the Column A Value
ComboBox2 will be the one of the Column B Value
I did handle that ComboBoxes already....What I need only, when those ComboBoxes been selected the related datas will fill into the ListBox accordingly...
View 9 Replies
View Related
Apr 26, 2012
I have a 'dump' of a general ledger accounting system....about 20,000 rows. Column A contains the journal number for each set of transactions (there are usually two rows in each set but sometimes three), column C contains the name of the account, and column E the amount. For example:
Row 269 cell A269 = 487 (journal number) cell C269 = Cheque, cell E269 = $50
Row 270 cell A270 = 487 (journal number) cell C270 = Travel, cell E270 = -$50
What I am wanting to do is to extract the sets of journal entries, where the account name (in column C) is "Cheque"....so I would want to extract rows 269 and 270 based on the above example. If I filter using the account name it only gives me one row for each journal transaction - only half of the story. Given that the journal number links the two rows.
View 3 Replies
View Related
Jul 18, 2012
I have a worksheet with
Col A being Name,
B being primary skill,
C secondary skill and
D tertiary skill.
(Sanitised example below)
There are about 15 diferent types of skills ("Skill x, Skill y etc") listed in each of column B,C and D.
I would like to have a filter (or similar) where all names would show if a certain skill is present in either column B, C or D.
For example, a filter that on the below spreadsheet would allow me to view the names of all people who have "Skill x" either as a primary, secondary or tertiary skill.
I am using Excel 2010.
Name
Primary
Secondary
Tertiary
Person 1
x
[Code] .........
View 3 Replies
View Related
Nov 1, 2008
Background: I am HR manager for a construction company & keeper of the call-in list of personnel who are looking for work. I have a simple sheet that has columns:
Date Name Craft Experience ...more info...
If each call-in had only one craft, wouldn't have a problem. Those who are multicrafted ar listed e.g. "EL, MW, BM" In the column C. A caller two days later may be listed as "MW, BM, EL" We input the data as they say it since that is usually their order of expertise. (Yes, I know that it should have been set up with each craft having its own column, but I inherited the sheet & it has 4000+ entries)
I wrote a couple of small macros & assigned buttons on the sheet to allow the users to sort the sheet by date, or name, or craft. My customers (project managers) have requested to be able to sort by craft but have all the folks with any specific craft listed together.
Example (Excel 2003): ..
View 4 Replies
View Related
Sep 27, 2013
I'm running a pretty huge database with Part Numbers across several Suppliers which fluctuate constantly.
For example: a HEXAGONAL BOLT may have a Part Number ABC123, but depending on the size of the bolt it could be a ABC123-001 ABC123-V28 ABC123-40mm (etc)
There's a lot of data (some of it sensitive) so I don't want the users to see everything - I'm creating a front-end sheet and am looking for a way for a user to type in the Part Number "ABC123" into cell A1, then the Pivot below to auto-update (with Part Number on the 'Report Filter') to show all variations of ABC123, including ABC123-1 ABC123-2 etc - i.e. not an exact match; everything that contains the characters in cell A1.
The relevant information has been ported in and password protected on a sepearate sheet within the workbook, so it's literally a code to make the cell value affect the filter.
View 1 Replies
View Related
Feb 26, 2012
I have a workbook that updates from external source and creates sheets depending on a cell range.
I have put tab 1 and tab 0 on either end of where the new sheets will be inputted, will never know how many sheets
What i need to happen is if someone fills in "complete" in A7 in my "summary" sheet then the values in row 6 in all the other sheets get hardcoded. This needs to happen from A7 down to A26, so A8 = complete then copy row 7 etc
This is what i have so far
I get compile error here ........Sheets(ArrSh(1)).Activate
Also need it to work for all the other rows.
Sub hardcode()
'
'Sheets("Summary"). Select
If Range("a7") = "complete" Then
'
Sheets(Array("1", "0")).Select
Sheets(ArrSh(1)).Activate
[Code] ......
View 2 Replies
View Related
Aug 9, 2007
I have been running a simulation for about 18 hours now and just received:
Run-time error '1004':
Method 'Add' of object ' Sheets' failed
I have been creating new sheets, importing data, pulling some values from the data then deleting the respective sheet. I am using:
ActiveWorkbook.Sheets.Add after:=Sheets(Sheets.Count)
The sheet is actually being added to the workbook, seemingly before the error. I resume the code, and a new sheet is placed in the workbook and it errors again. The Debugger stops and highlights on the code above.The sheet count number was 10895 at the error, just as an indicator of how many times the simulation has performed successfully. I am hoping this is something I can fix without having to start over...
View 9 Replies
View Related
Feb 18, 2014
I have a work sheet named "Main_List"...In column D starting with "D2" I would like to list worksheets that I would like to have printed via VBA.
The workbook has several hundred worksheets and I would like to list in column D only worksheets that I would like to print with VBA code.
View 3 Replies
View Related
Dec 26, 2009
I have a workbook with 26 sheets, labelled A to Z. Column A in all the sheets have names from rows A6:A35.
I need a macro or a code to extract all the names from each of the 26 sheets and paste it to a new sheet 'Names' under column A, such that names starting with 'B' paste under all the names 'A' and so forth till 'Z'.
View 9 Replies
View Related
Feb 19, 2012
I've got data being scraped from a site, putting 1 new workbook in a folder each day
each workbook has 40 sheets in it.
i need to run 5 modules in sequence on a sheet then loop to the next sheet and run the same 5 modules.
ive writen all the modules, and can loop them through the sheets in sequence but i cant work out how to loop them through the each workbook in the folder..
is there an easy way to do this or can it not be done because it would need access to the folder that holds all the wordbooks which lives outside of excel on the desktop ?
View 5 Replies
View Related
May 6, 2014
I would like a macro to be able to save 26 tabs within the one document to individual PDFs.Preferably I would like to be able to specify each time exactly which tabs get printed, because often I don't need to print all 26, just the first 10 or so.I would like each PDF to automatically be named with the value in cell E10 of each tab.E10 already has a formula to create its final value. It references cells from other tabs within the same document. Hopefully the fact that this cell has a formula in it won't affect my ability to use the resulting value as a 'save as' reference?I would like it if the PDFs save to the same location as the Excel sheet from which they're generated is located. The location of the excel sheet will change every three months, so I'd prefer not to specify a location with a specific filepath, as it will have changed by the time I run the macro again.
I am using Excel 2010.
View 5 Replies
View Related
Aug 5, 2012
I am using MS Office 2010. I want to count---on multiple sheets---the number of times that a given cell is greater than another cell if and only if a third cell is equal to a given value. I want to do this for 4 sets of data on each sheet. I thought I had it figured out with this formula---
=SUMPRODUCT(COUNTIF(INDIRECT("'"&$H$1:$H$43&"'!$R1"),2*(AND("'"&$H$1:$H$43&"'!$E1">"'"&$H$1:$H$43&"'!$F1"))))+SUMPRODUCT(COUNTIF(INDIRECT("'"&$H$1:$H$43&"'!$S1"),2*(AND("'"&$H$1:$H$43&"'!$G1">"'"&$H$1:$H$43&"'!$H1"))))+SUMPRODUCT(COUNTIF(INDIRECT("'"&$H$1:$H$43&"'!$T1"),2*(AND("'"&$H$1:$H$43&"'!$I1">"'"&$H$1:$H$43&"'!$J1"))))+SUMPRODUCT(COUNTIF(INDIRECT("'"&$H$1:$H$43&"'!$U1"),2*(AND("'"&$H$1:$H$43&"'!$K1">"'"&$H$1:$H$43&"'!$L1"))))
but it returns a value of zero each time. Clearly there is an error in the formula.
Here is some background:
-- $H$1:$H$43 is a block of cells that has the names of the sheets in the workbook
-- E1 and F1, G1 and H1, I1 and J1, K1 and L1 are the four groups of cells that I am comparing.
In the entire workbook, I want to add 1 (counting function) only when:
R1=2 AND E1>F1 or
S1=2 AND G1>H1 or
T1=2 AND I1>J1
U1=2 and K1>L1
on each appropriate sheet in the workbook.
View 1 Replies
View Related
Feb 9, 2014
I have saved this on a 2010 workbook as I am at home but this will be used on a 2003 workbook.
I have several projects on one spreadsheet which multiple users will be working and I am trying to create a summary sheet of the work carried out.
Each user is expected to carry out a task on each row of the data held in each worksheet (research, call, update etc) and each task (Option 1-5) is assigned a value. Each user is expected to meet a certain level of points per day to calculate productivity.
I am looking for a sumproduct along the lines of the summary sheet attached but mine just takes one sheet into consideration and I need one for all sheets.
View 12 Replies
View Related
May 28, 2014
I have a Excel 2010 workbook used to rota in a large amount of staff for a call centre, which is split into four teams. Each sheet corresponds to a month of the calendar year eg Jan201, Feb 2014 etc..
What im trying to do is put in a sheet at the front of the workbook that I can select the team, which populates the list of staff in that team and then checking across a specified date range gives the shifts that those respective staff will be working for the set time period (probably be looking at a seven day period and a 1 month period). (This in turn will be printed out to give to the staff members.)
View 2 Replies
View Related
Jan 20, 2009
I'm trying to put together a spreadsheet that tracks disc capacity increases, affected by any incoming projects. I've managed to do so for one project, but would like to for up to 10. The way i've designed the solution (i'm sure there are far more elegant ways, but hey) is thus:
A forecast worksheet keeps track of a grand total, taking information from sheets P1 -> P10 (being projects 1 to 10). I am unable to figure a way to add up all the increases from all 10 project worksheets with one succinct formula. What I use so far is: ='P1'!C83+SUMIF('P1'!E82,"=2009 - Q1",'P1'!D82) ..................
View 5 Replies
View Related
