I trying to look for a all the cells with the same fill color in the same column and assign a specific text to the cell for example
Column A - Cells with fill Yellow must have for text the word Sub- Total
Column A - Cells with fill Black must have for text the word Grand Total
1. By entering a numerical value in Cell A1 for example typing 5.
2. Then, next five columns would be blocked with specific color.
3. if i am typing 10, then 10 columns would be blocked with specific color.
i would like to be able to fill color numerous rows of cells that have a number in one of the columns that is either above a certain number or below a certain number.
example 3-Nov 5 H
5-Nov -3 V
6-Nov 4 V
9-Nov 12 V
10-Nov -1 H
in this example i want to fill color any row that in column 2 has a number less than -1 and greater than 4.
If I have cells in my worksheet filled with yellow color, is it possible to count them based only on this criterion (fill color). They might or might not be in the same column.
View 4 Replies View RelatedI have columns of black data that I manually go through and find regions that have cells with values that are 0.06 or more different.
I then turn these regions into blue colored regions.
Is there any way you can design a macro that goes through the spreadsheet and FILL COLOR YELLOWs a cell who is 0.06 or more less then the next cell down?
This would be so much easier on my eyes, since I usually have 80 columns and 1500 rows of data.
The blue coloring I still have to do manually because my human instinct is sometimes important there.
I would be using the FILL COLOR YELLOW cells as quick markers for my regions of interest.
I'm trying to add a textbox at the current position (selected cell) with a set size, fill color, and border color. I found this: http://msdn.microsoft.com/en-us/libr...8(VS.80).aspx:
View 2 Replies View RelatedI am using Excel 2010 and basically i am trying to fill a range of cell with a green color if any value was enter in a specific cells. Example: I would like to fill range: A10:c13 with a green color (regardless of the cells content in this range) if a value was entered in cell C10 or C11 or C12 or C13.
I've tried conditional formatting but unfortunately I'll have to apply formatting for every cell and for a range of over hundred cells is not efficient.
I have the table, as shown on left in the appended image, and the final result should be the right one.
The steps are written as 1, 2, 3 and 4.
Untitled.png
I have a question, can I fill a cell with a color in VBA? If is that possible, how can I do it?
View 2 Replies View RelatedI am using this formula:
=IF(INDIRECT($E$1&"!$B4")=0,"",IFERROR(INDIRECT($E$1&"!$B4"),""))
Now, if that cell happens to be blank, I want it to be grey. But if data is drawn into the cell, I don't want it to be grey.
Is it possible to have a cell colored with a fill color in the spreadsheet, but not have the fill color print when the sheet is printed?
View 9 Replies View Relatedfill color of autoshapes on condition depend on cell value
View 1 Replies View RelatedI am writing a program in excel spreadsheet and I was wondering how to fill an input cell with color automatically in excel 2007.
I mean that, say I am writing an addition program, I am giving an input numbers in B1 and B2 and i am writing formula in B3 (=B1+B2). I want excel to fill B1 and B2 with yellow/any color automatlically. Only the cells with number input should be highlighted.
How to "hard code" a cell's fill color? I want to assign a cell's fill color to yellow. While setting the fill color is easily done, my problem is that as soon as I paste data into that cell, it looses its fill color. Is there a way to tell the cell to never change the fill color?
View 1 Replies View RelatedI am setting up a schedule maker for a coworker, in which I have divided two columns into time in and time out for each day of the week. My coworker wants the cell to be highlighted red if the shift is a night shift (Begins after 4), and I used conditional formatting to set up both columns independently to evaluate if the value of their content is after 4 PM. However, this means if a shift starts at noon, but ends after 4, only the time out cell will be highlighted red, not a huge issue but it isn't aesthetically pleasing.
View 3 Replies View RelatedI wish to do the following & and am struggling (attempted to do it in Conditional Formatting but have not succeeded)
I want to do the following :-
If the date in cell A1 has no date entered i.e blank then fill D1 in Yellow If a date in cell B1 is past then fill Cell D1 Red If a date in cell C1 is entered with a date(any) then fill D1 in Green
I have 10 rows of 6 numbers, all between 1 & 49, in the range A1:F10. I also have the range A20:AW20, which are all currently blank cells. When I type a number between 1 and 49 inclusive into the range A20:AW20, any number that matches it in the range A1:F1 I want the cell to fill in colour.
View 1 Replies View RelatedI'm using Excel 2003- and I am trying to change the fillColor of a cell based on the value of that cell.
11111122222222233333333344455555555555556666777888
If I use Conditional Formatting I can only use 3 colors, I'd like to use 8 or 9. Is there another way to do this without using the Conditional Formatting?
I'd like the result to look something like this-
11111122222222233333333344455555555555556666777888
I've looked at the similar threads in this Forum, but I couldn't find exactly what I needed.
I need a macro to fill any cell in any column with red color. The same cell should also have red fonts with word 'RED' typed in the cell, so that word 'RED' is invisible.
I have a spreadsheet that has a bunch of empty cells that I need to fill in. Someone else needs to know which ones I have filled in after I am done. Is there a way that I can have Excel automatically highlight the cell after I put something in?
I know I could highlight the cell manually after I put something in it but if Excel can do this automatically for me, that would be the best as this is a very large spreadsheet and there will be many blanks to fill in. I am using Excel 2003.
I have a template I have been asked to amend and I know I need to use Conditional Formatting I just can't crack the formula I need to use. Cell A2 will have either "CD" or "CW" or "IN" input into it
When user inputs either "CD" or "CW" into cell A2, I want cell G2 to have "Margin Movement" automatically displayed. When user inputs "IN" into cell A2, I want cell F2 to have "MV" automatically displayed, and I want cell G2 to be coloured in bright red fill. Then user is to go to cell G2 and input some text as a description, and I want the red fill to disappear once they have input something in there.
I thought I had it licked using IF statements for the "Margin Movement" and the "MV" cells, but I can't get the conditional formatting to work - I assume this is because the cells aren't technically "blank", as they have IF statements in them.
I have a spread sheet and I want to conditionally format rows to be a certain color. That part I'm fine with. But I don't want them to be a set color. I have a "key" of different colored cells that I want to be the fill colors of the formatting. The ultimate goal is that for example the key looked like this
red
blue
yellow
green
then the rows I had would be formatted as red, blue, yellow, and green. But if you were to go into the key and change the first cell from red to purple, then the rows would become formatted as purple, blue, yellow, and green. Obviously I can copy formating by hand using the format painter, but I want it to update automatically.
I want to highlight the cell of Column 'A' of excel only when it does not contain the text like "Verify", "Validate" or "Evaluate" in its content if, the value in corresponding cell of Column 'B' holds the value 'Y'. Secondly, the column 'A' can't contains the words like 'Verify', 'Validate' and 'Evaluate' if the corresponding cell in Column 'B' holds value 'N'. So just need to highlight those discrepancies if its there.
Column A
Column B
Expected Action
Press F3
N
Its Fine
Verify this..
Y
Its Fine
this....
Y
Need to Highlight Cell of Column A as Value in Column B is Y but the column A does not contain any value like "Verify", Validate" or "Evaluate"
Verify This.
N
Need to Highlight Cell of Column B as the Value of Column A contains words like "verify", "validate", "evaluate" but corresponding cell value in column B does not hold value "Y".
When I type numbers in the cells from D4 to D14, E4 to E14 and so on, the particular cell should turn into "Green". All the the cells will remain "yellow" and blank until numbers are entered based on the daily cleaning of machines. When particular machine no is entered in to a cell cell, that cell should turn green(this shows that "service is done for that machine")
View 2 Replies View RelatedAfternoon everyone i am having abit of trouble working on an excel 2007 spreadsheet. In cell I1 i have a tab called Color. i want the cells below I1 to be filled with one of 3 colors green, yellow, or red depending on whats in cell F "Status" (closed or open - in progress) and cell G ECD for estimated completion date.
Green - i need it to fill green if status is closed. Yellow - need it to fill yellow if ECD is any date greater than today and if status is open. Red - need it to fill red if ECD is todays date or older and status is open.
I have a workbook in which there is a sheet containing a table.
Excel 2002ABC123Specific Gravity6 Volt ValuesSOC40.0000.000Dead
51.1345.97010%61.1485.99020%71.1626.02030%81.1766.06040%91.1906.10050%101.1976.12055%
111.2046.14060%121.2116.16065%131.2186.18070%141.2256.20075%151.2336.23080%161.2416.26085%
171.2496.31290%181.2576.32095%191.2656.350100%SOC Chart
From another sheet I query this table using the LOOKUP function to obtain values from column C such as 25% 60% and so on. A typical query formula looks like this:
=LOOKUP(B2,'SOC Chart'!B4:'SOC Chart'!C19)
It would be nice if the fill color came along with the value.
I'm trying to discover the best way to accomplish formatting a cell by filling it a certain color based on 2 of 3 criteria of other cells.
Column A has the title of the field. Cells B1:D1 have one of 3 values: Nothing/blank, Complete, or x. If all of the x's are gone within the range of B1:D1, I'd like to automatically format cell A1 to fill in Blue (or any color).
A1__________________B1_________________C1_____________D1
Generic Name______Complete_______________x_____________
If the 'x' in C1 is changed to the value of 'Complete', I'd like A1/Generic Name to be filled in with a color.
I am aware of the ColorIndex, but more specifically I need to change the fill color of a cell that is 9 columns to the right of the active cell. I can't find out how to make this work. to clarify:
ActiveCell + 9 columns.Interior.ColorIndex = Yellow
There has got to be an easy way to do this.
I am a locksmith and attempting to write a spreadsheet app. for my line of work. The output page will use columns A-G and rows 1-?10000? depending on the size of the system. If a 5 pin system is requested then columns A+B will be blacked out. 6 pin system A is blacked out. 7 pin system nothing blacked out. Also, if any cell matches the master key that was input, that cell is filled with red. I know, confusing.
Basically, I am trying to remove the blacked out columns automatically, and to remove the enitire row is any cell in that row is filled with red. Then to remove blank lines.
how I can alternate the background color (fill color) of rows in a spreadsheet. Say I wanted every other row to be gray starting at row 10.
View 6 Replies View Related
