Find Intercepting Cell Of Row & Column
Nov 26, 2007
Im trying to create a macro that will search for a value within a column then find another value in a row and select the intercepting cell.
E.G
column 1 contains names and row A contains dates i need to select the cell that is JOE BLOGGS, 01/01/07
View 9 Replies
ADVERTISEMENT
Jul 9, 2014
I need a find the intersecting price values for any given height and width. From what I have read on the internet, I can use the "=INDEX( ),MATCH( ),MATCH( ))" formula. However, this doesn't seem to work because the height and width is separated into intervals.
View 3 Replies
View Related
Jun 21, 2006
I have developed a program in which the user will only see the userforms (and to an certain extent not even be aware of excel doing most of the work).
i am looking for code that will intercept an error message should something go wrong in my vb code. Currently when an error occurs, it pops back to VB and gives the error message. I want it to rather give a popoup message asking the user to contact me.
View 3 Replies
View Related
Aug 6, 2009
Please see the attached sheet. I have columns B through a lot (B through O in my oversimplified example). In every 7th row in each of these columns there is either a 1 or a blank/zero. I need to multiply that 7th number by the Quantity in column A, to achieve a total (ie the sum of each result of 7th cell*quantity) for each column in the bottom row, labeled "Totals".
In the actual version of my sheet, there are far too many rows to select everything manually. I've been fiddling with combinations of COUNTIF/COUNTA and OFFSET, but I haven't come up with a way to check for the 1 in every 7th row, THEN multiply that 1 by the quantity in column A, THEN add up the results for each column. As you can see, there are 1's elsewhere in the columns that are irrelevant to this particular calculation, so something like LOOKUP would also have to look in every 7th cell and couldn't just look at the column as a whole.
If you can't provide an immediate solution, but can at least point me to a resource that would allow me to devise a way to isolate every 7th row (THAT part is the sticking point), I'll surely post the solution to my own thread with updated keywords if I need it.
View 8 Replies
View Related
Aug 7, 2013
A
B
1
Name
Action
2
Joe
Created
3
Bob
Approved
4
Cindy
5
Jane
6
Dave
7
View 1 Replies
View Related
May 24, 2008
I have an excel sheet I am working on and in columns F1:F2000 I have an IF statment, I need to be able to add more "IF"s to it but I will exceed the 1024 char limit. Is there a way I can put this formula into VB as a function called DocumentType() and then in excel F1:F2000 =DocumentType()?
Is it as simple as:
Function DocumentType()
If(...........)
End Function
View 4 Replies
View Related
Jan 14, 2013
I need a macro to find the last cell in the column, then copy the formula to the next blank cell. Then, it goes back to the last cell (above) and paste's values. Then, go to the next column and repeat the process. I can do this but have to call each cell separatly...however, I would like to do it in a loop to simplify things. It would be great to even be able to just set the start and ending columns. Here is my current code:
Dim rng As Range, aCell As Range
Set rng = Range("C8, D8, E8, F8, G8, H8, J8, K8, L8, M8, N8, O8, P8, Q8, R8, S8, T8, U8")
For Each aCell In rng
Selection.End(xlDown).Select
Application.CutCopyMode = False
[Code] .......
It does not go to the next column, instead it stays in the same column and repeats the process.
View 8 Replies
View Related
May 27, 2014
There are groups of similar ID numbers in Column J. For a group of similar ID numbers in consecutive rows there is only one row that has a number greater than 0 in its Column L cell and the rest of the cells of Column L for that set of similar IDs is filled with 0s.
First for that unique ID group I need to find out which row is it that has a value greater than zero in its Column L cell.
Then I need to use that value to fill the rest of the 0s in Column L corresponding to that set of Unique IDs.
The process continues with identifying similar IDs in Column J and this time doing the same thing for their Column M. I have attached a sample file that shows the data and how the results need to look like.
View 3 Replies
View Related
May 23, 2014
file storage
1. Look at the "Days so far" section
2. Ignore cell C1
3. All the other cells in that row are shaded blue. Look at these.
4. Look at the "Volunteer" row - all the cells in that row are shaded blue. Look at these.
5. Wherever a name - any name - appears in the "Volunteer" row, 1 is added to the previous number in the "Days so far" section and the result is displayed in cell from the "Days so far" row above that Volunteer's name.
6. For example, we begin in C1 with a count of 12 days so far - this was manually entered
7. In cell H5, we see Henry has volunteered 1 day. The total no. of days so far should now be 12+1. Therefore, the number in H1 should be 13.
8. In cell G47, we see Joseph has volunteered 1 day. The total number of days volunteered BEFORE Joseph volunteered is 15 (see cell D43). But now, with Joseph volunteering 1 day, the total no. of days so far should now be 15+1. Therefore, the number in G43 should be 16.
9. what formula l must put in the "Days so far" row (excluding cell C1, which is manually input) to give me the "should be" results predicted in that row? I'm guessing it will be a formula which looks at each row fragment of the "Days so far" row, row by row, right up to the previous cell in that row, all within one formula.
P.S. I just want to leave the "Days so far" row blank, for any columns where there are no volunteers in the "Volunteer" row, so please don't give a formula which inserts zero for days with no volunteer, and then sums the cumulative total.
View 5 Replies
View Related
May 21, 2008
how to explain this except by showing it, so I explained it as best I could in the attachment. Anyone think they have a solution for this? Let me know if you need more information. Thanks!
the macro will look at the value I entered in cell A1, then find all instances of it in Column A
in every row that A1 matches, if the value in column E is "0", I need the macro to change the value in column E of that row from "0" to (that row's column B * $B$1)
View 7 Replies
View Related
Jun 10, 2008
I have a drop down list in a merged cell B12-F12 and B13-F13 and B14-F14 . . . B30-F30.
I need the adjacent merged cell to populate a reason (text) based on the text answer in the drop down list or the entered text in the first merged cell. For example in the cell B12-F12 the user picks from the list or types in "Amiodarone." I want the adjacent merged cell G12-J12to automatically fill with "Heart Rhythm." I also want to be able to set up multiple if - them statements like if Amiodarone is entered then fill adjacent cell with Heart Rhythm and if Toprol XL then fill adjacent cell with Heart / Blood pressure and if simvastatin then fill adjacent cell with Cholesterol, etc. I have about 30 different options for cell 1 that I want to have auto fill in cell 2 based on the contents of cell 1. I've attached my file.
I want the user to be able to choose from the list or type the drug name in.
View 8 Replies
View Related
Apr 2, 2009
I would like to know how to find the last column and last cell in the worksheet.
View 3 Replies
View Related
May 18, 2012
Private Sub CommandButton1_Click()
If Range("C10").Value = Range("C9").Value Then
Range("D10").Select
With Selection.Font
.Name = "Arial"
.FontStyle = "Bold"
[Code] ......
The code above is what I use to set the font colour, how I modify it to find the last used cell in the column and use that to run the code
View 9 Replies
View Related
Aug 24, 2012
I'm trying to find the last cell in a column where blanks might exist in the data and as such I can't use the x1down method to find it.
To add to the complexity I am finding the column so I can't hard code the column into the code. How to find the last cell correctly? I am passing these variable to a select case statement thus why I am storing the values.
Code:
Dim PayrollStart As String
Dim PayrollEnd As String
Dim PayrollRange as String
'Find the start value
Range("A1").Select
[Code] ..........
View 3 Replies
View Related
Jan 26, 2013
This finds the last used cell in column E...
Code:
Cells(Rows.Count, "E").End(xlUp).Select
...but I want it to select the next cell down, I just can't seem to get the + 1 cell right.
View 2 Replies
View Related
Jan 15, 2010
I use the Index/Match formula to find the last active cell in a column quite effectively.
I'm wondering though how to adapt it to find the second last active cell?
EX: Last active cell formula:
Data:
a 10
b 11
c 0
d 12
View 10 Replies
View Related
Feb 27, 2014
I'm trying to write a macro to do the following:
1) Take cell A1 and copy adjacent cell B1 in new sheet.
2) Then search cell B1 to find a match in column A.
3) If there is a match, I want to copy that adjacent cell in B and into the new sheet.
4) If there is no match, then leave as is from before and move onto the cell.
5) Continue for the rest of the data.
Here is an example of what i am trying to achieve This is in the first sheet:
Column A Column B
Car Saw
Dew Jacket
Pen Key
Saw Screen
Hand Shoe
Jacket Window
Screen Sock
Now I want this in the next sheet:
Column A Column B Column C Column D
Car Saw Screen Sock
Dew Jacket Window
Pen Key
Saw Screen Sock
Hand Shoe
Jacket Window
Screen SockData 1.xlsx
View 2 Replies
View Related
Dec 11, 2008
I had posted this earlier but it was moved. I think this post will explain it better. I put data into a worksheet called "Budget" each week. When I put the data in I type a date in Cell "BL7". In another sheet called "EV Report" row 8 has week ending dates (i.e. Sunday of each week). I want to run a macro after I change the date ("BL7") and data in the "Budget" sheet that will search row 8 of the "EV Report" sheet to find the date in cell "BL7" of the "Budget" sheet. Once it finds which column that date is in I want it to put a formula in row 13 of the same column (the one found based on the date of BL7) that will add the value in row 12 of the same column with the value in row 13 of the previous column.
I don't want the formula to be there until the macro is run. I'm doing this because I have a graph of the formula and I don't want the graph to show the other cells.
View 2 Replies
View Related
Jan 24, 2009
I have a worksheet (Sheet1) with column A labeled MissionNumber. I have also created a Form which I can use to enter the next mission number into that column. However, instead of manually entering the number...when opening the form I would like it to check column A for the last entry...and automatically increment the mission number by 1 and have it displayed on the form.
View 10 Replies
View Related
Dec 2, 2009
I have a spreadsheet which has about 100 different SKUs in column A and the inventory for each SKU by period in columns B:Z
So for example B would be P1W1 and C would be P2W2, etc
what kind of lookup function would I use in VBA to find per say, the value of SKU #: "27017" in P1W2 ?
Apart from pivot table.
View 6 Replies
View Related
Jun 25, 2013
I am looking for a way to find the first blank cell in a column.
Range("A2").End(xlDown).Offset(1, 0).Select
The problem is that there are no 'blank cells because they have a formula in them that checks a different sheet for data. If there is data then it simply copies that data. If there is no data then the value of the cell is "". So the cell shows blank but in fact it isn't.
So how do I find the first cell that don't show data because of the formula that resides in the cell? Here is the cells formula..
=IF(Data!J2"",Data!J2,"")
Starts in A2 through A151
View 9 Replies
View Related
Apr 24, 2008
I am running this macro or some variation of it, depending on the column I need the time entered into:
Sub MacroD()
Dim LR As Long
LR = Range("D" & Rows.Count).End(xlUp).Row
ActiveSheet.Unprotect
Range("D18:D" & LR).Value = Now
ActiveCell.Offset(1, 0).Select
UserForm1.ListBox1.Text = "Time"
UserForm1.ListBox1.SetFocus
' UserForm1.Show
End Sub
When I need to run the same macro again (say I've run Macro D once, and now I need to run it again to get the next time), the forumla overrides the previous timestamp. I need the macro to find the next empty cell in column D and enter the timestamp there.
Sheet1 *ABCDEFGHIJKLMN15Major EventMajor Event Clock TimePUSH#########SPREAD########OUT FWD########REV########OUT REV########Delay########1617Start10:55:09*10:55:27 *10:56:24 *10:56:26 *10:56:19 *10:56:28 ####10:55:59 18W-U10:55:180.40010:56:23 0.01710:56:24 0.03310:56:26 0.01710:56:27 0.01710:56:28 0.03310:56:30 19MTT10:55:26######*0.000*0.000*0.000*0.000*0.000*20**0.000*0.000*0.000*0.000*0.000*0.000*21****0.000*0.000*0.000*0.000*0.000*> Excel Jeanie HTML 4
View 26 Replies
View Related
Jul 7, 2006
I have a code which looks at sheet2, useing a date value, and returns the Vent value and the Tanker value to sheet1. Because of the file size I have pasted a small section of Sheet2 in the hopes you can see what I am doing. As can be seen my code is not going to work with Offset as soon as the Data fills further down the sheet(every 2 weeks). I need a way to reference the active cells column name (it is a named range) or header name. Both are the same. That is the header name is the same as the name of the range. there is a way to perhaps find the first cell of the column,which I guess would work,but have reached a stale mate with what I've tried so far.
Vent 01Vent 02Vent 03Vent 04
Date3/06/063/06/06n1/06/06
Tanker8248824617606
WhoJ AshJ AshEmptyHarry
Date
Tanker
Who
Private Sub DueCommandButton_Click()
Dim strRecordID As Range
Dim rngData As Range
Dim Vents2 As Range, Tanker_Result As Range
Dim wsheet1 As Worksheet, wsheet2 As Worksheet
Dim Column_Name As Range
Dim ActiveCell As Range
Set wsheet1 = Worksheets("Sheet1")
Set wsheet2 = Worksheets("Sheet2")....................
View 2 Replies
View Related
Jul 8, 2006
I have just been thrown back into programmng after a two year break so I am obviously rusty.
I have the following
Sub NumberOfReceiptFlowsAfterInitial4()
Dim my_cell As Range
Dim first_one As Double
Dim second_one As Double
Dim running_total As Double
Dim final_total As Double
Dim result As Double
I need something similar to this routine that will find the last occurrence of a cell that contains the value greater than or = 1%.
View 9 Replies
View Related
Sep 12, 2006
I want to use the Find method to find an empty cell in the first column. But at the top of the data taqble, there are some empty cells, so I don't get the one I want. So I thought about searching in the column 1 excluding the first cells. Here is my
Dim rFoundCell As Range
Dim rFilledCol1 As Range
'I define the column excluding the cells that contain empty cells
rFilledCol1 = Columns(1) - Range("A1:A10")
Set rFoundCell = rFilledCol1.Find(What:="", After:=Range("A11"),
LookIn:=xlValues, LookAt:=xlPart, SearchOrder:=xlByRows, _
SearchDirection:=xlNext, MatchCase:=False)
But I get a Syntax error. Do you know why?
View 8 Replies
View Related
Oct 25, 2006
I am trying to find code that will find the first empty cell in a row and add data in cell left to right. This code is filling all data in the last cell of the row and I am hoping to have it loop through data and fill the first empy cell (M1) and next data placed (m2) and so on
Sub Reportdates()
Dim Grid As Range, Gridcell
Dim Crit1 As Range
Dim Crit2 As Range
Set Grid = ThisWorkbook.Worksheets("sheet3").Range(" dates")
Set Crit1 = ThisWorkbook.Worksheets("Stageing").Range("J1")
Set Crit2 = ThisWorkbook.Worksheets("Stageing").Range("K1")
For Each Gridcell In Grid
If Gridcell.Value >= Crit1 And Gridcell.Value <= Crit2 Then
ThisWorkbook.Worksheets("Stageing").Range("M1").End(xlToRight).Offset(0, 0) = Gridcell.Value
End If
'Exit For
Next Gridcell
End Sub
View 3 Replies
View Related
Jun 19, 2007
Is there a way to find the first blank cell in a column using a formula?
View 9 Replies
View Related
Mar 22, 2008
I am drawing a complete blank of this one. I know it can be done but I can't seem to remember how I did this in the past.
I have a sheet that has cells A1 at MB, A2 as ML A3 as MD
Then in cells B1 I have MB,TL then in B2 I have ML and then B3 is Blank this time.
Then in cells C1 I have Jim, C2 has Jack, and C3 has Fred.
What I want to do is have a formula that is in cell D1 that looks at the value in A1 and finds that value in Column B and if it is found return the value in the same row in Column C. In the example it would show Jim since MB is found in cell B1.
View 6 Replies
View Related
Jun 19, 2008
I'm trying to write a macro to do the following.
1) Take cell A1 and look for a match in column A.
2) If there is a match, I want it to run the sub i've already written(Macro8), to update the data in its respective row.
3) If there is no match other than itself (cell A1), I want to automatically select the first empty cell in column A and run my sub (Macro8) to insert the data
View 7 Replies
View Related
Nov 8, 2013
I'm evaluating the effectiveness of a keyword list we use to identify certain, high priorit,y medical situations from a string of text.
So, I have a column on a sheet of data (EIS Report!"B:B") in this case, and a seperate column on another sheet with keywords (Keywords!"A2:A47").
I use the formula ={OR(NOT(ISERROR(FIND(keywords!$A$2:$A$47,$B2))))} to identify if any of the keywords exist in the string.
This works well but I would like to improve my work in two ways:
1 - Identfiy, in another column on the EIS report sheet, which keyword it is that's been found within the string,
2 - On the keyword sheet, add another column of words, which if found within the string, would act as an exclusion.For example, I might use "STAB" as a keyword to look for "Male stabbed" etc, however might want to exclude "STABBING" to stop the solution triggering on "STABBING PAINS IN ABDO"
How might i adjust my formula?
View 9 Replies
View Related