I need a find the intersecting price values for any given height and width. From what I have read on the internet, I can use the "=INDEX( ),MATCH( ),MATCH( ))" formula. However, this doesn't seem to work because the height and width is separated into intervals.
View 3 RepliesIm trying to create a macro that will search for a value within a column then find another value in a row and select the intercepting cell.
E.G
column 1 contains names and row A contains dates i need to select the cell that is JOE BLOGGS, 01/01/07
I have developed a program in which the user will only see the userforms (and to an certain extent not even be aware of excel doing most of the work).
i am looking for code that will intercept an error message should something go wrong in my vb code. Currently when an error occurs, it pops back to VB and gives the error message. I want it to rather give a popoup message asking the user to contact me.
What I'm looking for is a formula that will search a data table on a source tab and find a value in a column. And have the ability to function like a vlookup and display the contents of cells in the same row on a different tab. The catch is the value will repeat it's self at random interval in the data table. So for example the values are ON-1 to ON-8 and MB-1 to MB-8. Each value will have it's own tab and I want the formula to search the Source tab and capture the value in order but on the next row of the spread sheet.
View 4 Replies View RelatedI'm trying to come up with a formula to find and proper sum the value in a table like this one:
Month/year
1995
1996
1997
1998
Jan
3,63%
0,86%
3,5%
1,5%
[Code] .........
But the actual table goes till december and the years till 2013. For instance, if I need the cumulative index from, let's say, jan/2010 to feb/2013, I'm having trouble with this formula. I can't get excel to sum them properly.
Problem description: I need to put together twelve arrows each comprised of four components; field point, front insert, shaft & fletch and nock. Therefore, I have forty-eight components in an Excel table. Each of these components may differ slightly in weight. My objective is to mix and match all of the components to create as many arrows as possible of the same exact weight.
Two questions. 1) How should I be thinking about setting up the problem? 2) Which Excel function returns the results I'm looking for?
Total weight
Point
Insert
Nock
Shaft
?
100.1
109.7
20
179.1
100.1
110
I am pretty new to VBA and have been wrecking my brain and reading just about every Thread there is on this and still can't figure out why I am not getting the code to work.
I am trying to get data from Column "Sale Price", stored in Table "MasterInventory" on worksheet "Master Inventory" to populate a textbox in a UserForm by means of Vlookup.
Upon running the code below I'm getting Value Error 1004, and during Debug when I hover over "MasterInventory" it shows "MasterInventory=Empty"
Also Im trying to figure out how to do it so I can call the "userform" up from any worksheet and add the entries in the table on worksheet (Jan, Feb, Mar, etc.) for the month depicted in the TextBox "Date" on the Userform
The code looks like this:
Private Sub CBx_PROD_AfterUpdate()
'lookup value in Col F [Sale Price] based on Product (Col A [Description] in Table [MasterInventory])
With TB_SP
If OB_Y.Value = True Then
Me.TB_SP.Value = Application.WorksheetFunction.VLookup(CBx_PROD.Value, MasterInventory, 6, False).Value
End If
If CBx_PROD.Value = "" Then
Exit Sub
End If
End With
End Sub
I have a table refreshed from a MySQL database that I use to create a report. I can use this data quite well using formulas in the cells.But in order for me to add more information to the report I use without making it cluttered I need to add some data as comments.
I have created a loop that picks up some cell values that I want to use as criteria but I cant work out how to use these variables to search through the table and get the info I require to put in the comment. In a cell I would use offset/match or index/match to get the required cell value but how do I do this in VBA?
Data Table including-
List of Identifying Code Numbers for customer invoices
Multiple repetitions of individual Identifying Code Numbers in list
Various data in table range including Various Values of invoices from different dates for each repetion of Identifying Code Number.
- Wish to find largest invoice for each Individual Identifying Code Number in the table without using a pivot table.
i have tried combining Max and Large functions with Vlookups etc.
I have a large table that I want to reconstruct. For simplicity sake, let's just says it's 3 rows (excluding headers) by 3 columns.
Item Description
1/1/2014
1/2/2014
1/3/2014
Cheese Burgers
2
3
4
Hot Dogs
5
12
6
Beverages
2
5
3
I want to reconstruct it so that the column headers become values in the table. The table headers are dates, in this case, if that gives clearer picture. So the new table would have 9 rows, (3 rows of data, excluding the header times four columns).
Item Description
Date
Quantity
Cheese Burgers
1/1/2014
2
Hot Dogs
1/1/2014
5
[Code] ....
The above example is sorted by date but I would be indifferent if it's sorted by the Item Description.
Is there an easy way to do this? Pivot possibly? Again, my data table is large: 36 rows x 181 columns. Using the copy/paste/transpose feature is pretty impractical.
how can i sum pivot table filtering some values in other table. if i change filter, sum is changed
View 1 Replies View RelatedVlookup a table, to another table that has multiple values.
E.g.
Table
GPASP002
Look up table - need to return second coloum but not the first value, all the values?
GPASP002 KZASP100
GPASP002 KZASP500
GPASP002 KZASP600
GPASP002 KZASP501
GPASP002 KZASP502
GPASP002 KZASP601
I have this list of companies (about 50) in one work sheet. If a certain company has sales or costs it will appear under the company name, as either Products, Installation or Freight. It looks something like this:
Company
Sales
Costs
[Code]....
What formula should I use the find the installation that belongs to that certain company? And not all companies has a line that say installation.
One aspect of my Excel-based project involves comparing the operator-entered part number (in Excel) to a predetermined list of part numbers in one column of an Access database table. Right now, my program is telling me that every part number entered in the spreadsheet (50+) does not match any part number in the database, which I've verified to be incorrect. I've checked that both the spreadsheet part number and the database part number are of the string datatype.
To the best of my knowledge, my looping logic seems valid and robust. To the best of my knowledge, there are no hidden characters in either the database cells or in the spreadsheet cells causing this apparent mismatch. I'm completely stumped at this point as to why my program doesn't detect any matches between the spreadsheet and the database table. Below is the Sub containing the code for checking that the part numbers match:
[Code] ....
This issue seems to be a hybrid issue between Excel and Access with (to me) more of the issue on the Access end.
I am trying to find some missing values compared to 6 base values. For instance, I have a sheet with some names translated to another language, I am trying to find the languages some names have not been translated too.
For example, if I have six languages, Arabic, Japanese, Russian, Chinese-Simplified, Chinese- Traditional, and Korean to compare too, I want to find any names that are not translated in certain languages.
Sample:
John Japanese
John Chinese - Simplified
John Korean
Martin Arabic
Martin Chinese - Simplified
Martin Russian
Ramon Arabic
Ramon Russian
Sam Arabic
Sam Chinese- Traditional
I have data similar as shown in the following:
A1A11
B2AA1122
C3B22
D4C33
D44
The idea is to add compare the cells of the first column with the third column. Where same letters/words exist, the corresponding value of the first column should be added to the second column (where no letter exists equally, the space remains empty), so it will look like this
A111
AA1122
B222
C333
D444
the third column always will have at least the same letters as the first column, but new letters/entries can occur.
compare some list of values in order to fiind the common values.
View 1 Replies View RelatedTrying to find the sum of all cells in the array described in the formula that are equal to the values inside the quotations. I used this exact (as far as I can tell) formula to find the sum of values that were NOT equal to my quoted values and it worked just fine. Any ideas why formula 'A' will not work but formula 'B' does work? I have a feeling I'm missing something simple here!
Formula A - Does not work:
=SUMPRODUCT(--('Master Lead Sheet'!$J$2:$J$10000=$B2),--('Master Lead Sheet'!$N$2:$N$10000="REJECTED"),--('Master Lead Sheet'!$N$2:$N$10000="CONDITIONED"),--('Master Lead Sheet'!$N$2:$N$10000="APPROVED"))
Formla B - Works:
=SUMPRODUCT(--('Master Lead Sheet'!$J$2:$J$10000=$B2),--('Master Lead Sheet'!$N$2:$N$10000"No Answer"),--('Master Lead Sheet'!$N$2:$N$10000"Disconnected"),--('Master Lead Sheet'!$N$2:$N$10000"Wrong Number"),--('Master Lead Sheet'!$N$2:$N$10000"EMAILED"),--('Master Lead Sheet'!$N$2:$N$10000"needs to be emailed"),--('Master Lead Sheet'!$N$2:$N$10000"Refund"),--('Master Lead Sheet'!$N$2:$N$10000"REFUNDED"))
I have data that looks like this:
day# id amount
1 56575 0
1 56675 0
1 56680 0
1 56683 0
1 56681 0
1 51810 0..............
How do you write an excel macro that looks at the number in the first column (day #) and finds all the duplicate id#s in the second column that are in day 1and adds the amounts together in the 3rd column then writes the first column number (day#), second column number(id#) and the third column (sum of the amounts of duplicate Id#) to an new worksheet. Then the macro would loop through day #2 and do the same thing. Notice that the values in the id column are unique in this data set below this is how I would like the data to look. I have accomplished this in a pivot table but my problem is I need a cvs file to export the final data into an external database which is why I need a macro.....
How do i change this code so i can find the next available row in a table. At the moment it finds the next available row after the table. The table starts row 4 and finishes row 311 however it could grow. There is data in other columns in the Table so i need to stick to searching only column B for the next blank cell.
[Code] .....
I have data spread across 76Rx68C - this table is raw data with no logic to placement of values within .
In another sheet i have one row of values.
I need to know if each of these values appear in the data spread. - a simple YES / NO would suffice - i dont need to know where exactly are they appearing in the data table.
I'm having trouble coming up with the proper syntax to find the last (empty) row in a table. I already have the code figured out to add the row, but need to identify that cell as the paste target.
Originally, the 3 tables on this sheet were in different columns (each table is only a one column listing of part numbers). But then when I would attempt to delete something from one of the tables, it would delete the entire row, which of course affected the other tables as well.
So, I arranged the Tables so that they are all in Column A. Now a deletion shouldn't affect the other tables. But with that came another problem, the usual method (End(xlUp)) to find the last cell no longer works. I need to find the last cell in a specific table, not the last cell in the column.
Code:
the_sheet.Range("Table3" & last_row_with_data).PasteSpecial Paste:=xlPasteValues
Here is this section of code in its entirety:
Code:
Public Sub SKU_Fix()
Dim lrow As Long
Dim the_sheet As Worksheet
Dim table_list_object As ListObject
Dim table_object_row As ListRow
Dim last_row_with_data As Long
Dim Log2 As String
[Code] .........
What formula should I use to find values in Table 2 from Table 1.
Table 1
Acct# Value
100000 12
180250 9
180300 9
180450 9
181854 15
181860 11
Table 2
180250 ?
180300 ?
181860 ?
100000 ?
180250 ?
181860 ?
I am trying to develop a crop rotation for my one acre farm using a spreadsheet, but am running into some trouble. I will describe a simplified version of the problem:
Column A contains a list of numbers say (10, 40, 50, 20)
Column B also contains a list of numbers: (3, 6, 9, 2)
A given row, therefore, contains a set of these: Row 1 contains 10 and 3, Row 2 contains 40 and 6, etc.
In Column C, I want to be able to put in a Column A value and get back the Column B value from the same row.
For example, in column C, I want to type 10 and have excel give me a 3.
It looks something like this: .....
Look at the Picture Below I Want that the Cell that marked with Red Arrow Returns a "Rank" Value in the Table, Which is a "Blaster" Rank. And I want That Cell Also Automatically Changed When "Blaster" is Changed to "A.A.Z Gonz" or etc. What Functions that i have to choose, INDEX? XL.jpg
View 6 Replies View RelatedI need a formula that will allow me to search a column (B1:B19989) that
contains text with the data from a column (A1:A32417) that contains a list of
part numbers and display a result(True/False) into another column (C). Column
B's text has the part numbers mixed in with the text. I need to know which
numbers from column A are found within the text of column B.
This is what I have tried in C1: =VLOOKUP(A1,CATALOG,2)
All I get is #N/A - I know that the value in A1 exists in CATALOG
CATALOG=The name of array B1:B19989
I have a pivot table that looks like this:Red Yellow OrangeApple .................12
Banana ......................10
Strawberry ..........8
Carrot ..................................2
I want to know the colour of each fruit, for example:
Apple Red
Banana Yellow
Strawberry Red
Carrot Orange
What formula should I have in the second column to find the colour of the fruits?
I have one sheet (sheet 2) that contains three columns of data, a range of a low value and a high value and a corresponding value (column c)--
A B C
0 54 0
55 64 1
on the other sheet(sheet 1), i have a column(column x) in which i need to find that corresponding value (that column c on sheet 2). basically, i need to write a function that says if value x (on sheet 1, column y) is between the values in columns A and B (on sheet 2), input the corresponding C cloumn value (on sheet 2) into column x on sheet 1. i hope this makes sense. an additional snag is that i have about 60 rows on sheet 2, and i need to make it keep searching this table until it finds the range that contains my value x (on sheet 1).
I must have gone into a complete "blackout" as I am stuck with something that seems to be more than simple.
In cell F18 I need a NON Array-formula in order to return the cheapest Provider for a given Country [to be selected via D.V. in cell F14].
I manged to find an Array formula which I left in a broken state in cells F6-->H6/
In the attached file I have two tables Table A illustrates the dates with start, end and code, Table B where I want the formulas that they would find how many days a code is in the month.
From F4:I37 I manually entered the day, I would calculate automatically.
esempio.zip