I use the Index/Match formula to find the last active cell in a column quite effectively.
I'm wondering though how to adapt it to find the second last active cell?
EX: Last active cell formula:
Data:
a 10
b 11
c 0
d 12
I have a code which looks at sheet2, useing a date value, and returns the Vent value and the Tanker value to sheet1. Because of the file size I have pasted a small section of Sheet2 in the hopes you can see what I am doing. As can be seen my code is not going to work with Offset as soon as the Data fills further down the sheet(every 2 weeks). I need a way to reference the active cells column name (it is a named range) or header name. Both are the same. That is the header name is the same as the name of the range. there is a way to perhaps find the first cell of the column,which I guess would work,but have reached a stale mate with what I've tried so far.
Vent 01Vent 02Vent 03Vent 04
Date3/06/063/06/06n1/06/06
Tanker8248824617606
WhoJ AshJ AshEmptyHarry
Date
Tanker
Who
Private Sub DueCommandButton_Click()
Dim strRecordID As Range
Dim rngData As Range
Dim Vents2 As Range, Tanker_Result As Range
Dim wsheet1 As Worksheet, wsheet2 As Worksheet
Dim Column_Name As Range
Dim ActiveCell As Range
Set wsheet1 = Worksheets("Sheet1")
Set wsheet2 = Worksheets("Sheet2")....................
How to find the column based on my active cell...if my active cell is in A1 then it pops up saying your in column A.
View 3 Replies View RelatedI have a range of amounts in Sheet 1 from F7:Q13 and im using the find method to search for the active and non active values in the cell. Which means that if there's a value in the cell it will transfer the value in Sheet 2, if nothing is found in the cell the cells in Sheet 2 will return as nothing or null.
I think the problem lies on the FindWhat variable. Im getting a compiled error which im not sure what is it.
I've attached the spreadsheet so you get a better idea of the problem that i encountered.
I would like to be able to Click a Cell or Button to enable me to go from the 'VIN ENTRY' worksheet to the 'Date Completed' worksheet and then be able to enter the Date in the Correct cell cooresponding to the last 6 digits of the VIN. I have included the File
WorkSheet 'Date Completed
ENTER Last 6 Digits of VIN:K43070Click
Here to Enter Date Completed
WorkSheet 'Date Completed
Colum A Column B...................
I am having problems getting a VBA search function to work... this is the code I am currently using with very little success:
Sub FindApp()
Selection.Copy
Sheets("Applications").Select
Cells.Find(What:="ADT32109", After:=ActiveCell, LookIn:=xlFormulas, _
LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _
MatchCase:=False).Activate
End Sub
What I am trying to achieve is to copy the contents of the active cell in the first sheet and find it within another sheet but I am unable to get the What:= section of the code to take the value of the copied cell.
I have a list of names in coloum D of a worksheet called "Trial", I have another worksheets called "Usage" with this list. I need a macro which can search the name written in Trial worksheet in Usage and worksheet, and activate the found results in usage worksheet.
I cannot use vlookup formulae here as "trial" sheet only has last names, which "usage" sheet has full names.
I need to write a macro for find a value in all sheets in current workbook. The problem is put like this: I have to write a ID (for DVD archiving) in a column but testing that generated value is unique in entire workbook (I have multiple sheets, organized by movie genre). I can use find method and testing for value <> Nothing but it always said that the value is present (the current cell value); there is any method to omit selected cell value? I think "After:=" parameter can do this but I don't figure out how to handle with it...
View 4 Replies View RelatedNeed to find the first cell above the active cell containing any sort of variable (integer, string value, cell fill colour, named range, etc...).
For example, a column contains multiple integer values between 1 and 10. I would like the macro to "locate" a specified value, say 3. Ideally the macro will select the first cell matching this criteria, located above the active cell. Once located, the resulting cell will be added to a range to be copy-pasted to a new worksheet.
I am planning to use this code for various applications in a workbook I am creating. At present the code will be used to locate string values, and cell fill colours. It is also likely this will extend to other types of variables in the future.
I've found information relating to the find function, but nothing specifically to find the first result above the active cell.
I have 2 columns of data
column A = weeks (A2:A50) i.e. P1W1, P1W2, P1W3....P12W4 etc
column B = headcount (B2:B50) i.e. 5, 7, 5...10 etc
Essentially my criteria is "looking for last week and give me headcount" i.e. my lookup criteria is P7W5 ....however if P7W5 has no data, i want the lookup to go up or offset to the row above (it may be one to 4 rows above)....
I have a workbook with 2 worksheets, A and B. Sheet A contains source data and sheet B a pivot table of this data. I want my user to click on a cell within the pivot table,click a button that runs a macro to find the instance of this value within Sheet A. I did record a macro but it did not work.
View 3 Replies View RelatedI want to use one button with a macro attached to it to locate data on a different worksheet. So I highlight the "activecell" I want to find on the other spreadsheet then click on the button and it goes to the correct spreadsheet and filters for the data I want (relevant to the activecell).
View 6 Replies View RelatedI would like to create macro, where it would on macro run copy text from active cell and find that value in another sheet (in column H) and select that cell.
What I did is this:
I am trying to loop through column A and I want to store in an array where I find "App" within the cell value. I am trying to find "App" but will store the whole cell value in the array. I could not figure out the Find method, so I tried the MID function but am having no luck.
Here is my code:
Code:
Sub Arraytest()
Dim arr As Variant, lastrow As Long, i As Long, f As Long, l As Long
f = 0
lastrow = Sheets("Sheet1").Range("A" & Rows.Count).End(xlUp).Row
ReDim arr(1 To 1, 1 To lastrow)
[Code] .....
I have a macro where I sum a large number of cells in column AZ. How can I have the Macro end in the last cell of column AZ where the sum is located? The length varies in each file.
View 3 Replies View RelatedI want a simple macro which will go to the cell in row one in the active cell's column
View 2 Replies View RelatedIn my macro, I need to, from any column, move the active cell to column A, while remaining in the same row.
View 2 Replies View RelatedIs there a formula I can use to locate the last active cell in a column. I did use the count function, however this isn't always reliable if there are blank cells within the column
View 5 Replies View RelatedI've been racking my brains trying to figure this out but cant, please can someone assist. I need to write some vba code that looks at cells in column aa and ag (on the same row) and displays a message is ag > 0 and aa <> "Agency".
View 8 Replies View RelatedI am trying to perform a sort based on the ActiveCell.Column
I thought my code would exclude the hearer rows, but presently it moves the header rows beneath the data
I tried
Header:=xlGuess as well as
Header:=xlNo
Same result
What am I doing wrong?
Thanks
-marc
Private Sub comp_mySort()
Selection.Sort Key1:= Cells(1, ActiveCell.Column), _
Order1:=xlAscending, Header:=xlNo, _
OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom
End Sub
I have a sort procedure I have been working on. Sort By Active Cell Column
Now I would like to make sure the row of the activecell.column is row 7. I tried
Private Sub comp_myMonthlyReport_SortAscend()
Dim rng As Range
With ActiveWindow
rng = .ActiveCell(7, .ActiveCell.Column)
End With
Selection.Sort Key1:=rng, _
Order1:=xlAscending, Header:=xlGuess, _
OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom
End Sub
But I receive this error: Run-time error '91': Object variable or With block variable not set
I use this macro to open a hyperlink in "column B" of the next row. However, it only works if I begin the macro from "column N" on the line above. (the hyperlink is always located in column B)
I want to be able to run this macro from any cell on the line above. How to modify it?
Code:
Sub Open_Hyperlink()
'
' Open_Hyperlink Macro
'
' Keyboard Shortcut: Ctrl+o
'
[Code]...
HTML Code:
ABCDEFGHIJKLMNO
1ActiveURLWhatDateFirst NameLast NameOtherOther2Other3Street1CityStateZip
2XLinkData112/21/2011BobSmithData2Data3Data4123 MainMooresvilleNC28117
3XLinkData112/22/2011LarryJonesData2bData3Data4456 MainMooresvilleNC28117
4XLinkData112/23/2011MaryAkinData2Data3Data4789 MainMooresvilleNC28117
An example would be to run it while Cell "I2", "J2", or "K2" is selected and have it open "B3"
Is it possible to click on a cell in column C, and have the wishlist below happen:
That active cell's row is hightlighted.
Any cell in that column that has the same value as active cell is also highlighted.
Plus, any cell in another sheet that has that value it's row is highlighted too.
Example:
I click on C5 in Sheet 2 its value is 45000789 it row is highlighted, this value also appears in C3 in the same sheet, so it's row is highlighted as well. Plus, in sheet 1 in C10 this value appears and it's row is highlighted as well. When any of the values are clicked again the highlight is removed from all parties.
The attached sample workbook has a listbox of areas in a userform. The Textbox on the user form is so that the user can edit the Area names in the listbox. The userform functions fine as long as the column that contains the area name is not hidden. What I want to be able to do is edit the Area Names using the Textbox with the area name column hidden.
View 2 Replies View RelatedI have a range of unlocked cells (B5:S10) that users enter data in. This sum of this data is then charted. The formula (sum) in a cell equals zero even when there is no data entered by the user. This zero is then charted.
I need to be able to plot the zeros if the user enters zeros but not plot the zero if the cells are blank.
What I was attempting to do is to use the worksheet change event to add the formulas to a cell so that the chart does not plot the value until something was added.
In my change event I need to know that a cell in the range (B5:S10) was changed and that if it was D7 (for example) that I need a formula enterd in D11 [=SUM(D5:D10)]. If it was I5 then the formula would have to go in I11 [=SUM(I5:I10)].
Is there a way to highlight the row and column of the active cell? The highlighting will move as the active cell is moved around the spread sheet. I have a newbie manager that is bugging the pea-turkey out of me! He wants to be able to easily see where he is within some of our sheets while he is in a vehicle or outside on a job site...seems like an "accessibility" type issue, but can't find anything in Excel "Options."
View 5 Replies View RelatedI want a macro which can filter the data on the basis of active cell
View 1 Replies View Related1st post so hope that title isn't too vague.
Using VBA, I have a macro that will find a column based on a week number and add in a new column.
It will then offset the ActiveCell down one.
I now need the macro to SUM all values in that row to the left of the ActiveCell.
My original thought was to use:
ActiveCell.Offset(1, 0).Range("A1").Select
Range(Selection, Selection.End(xlToLeft)).Select
Unfortunately, there are gaps in the data field, blank cells that should count as zero value.
How can I highlight all cells to the left, from whichever column the active cell is in, through to column B?
I have a spreadsheet with my Periods along row 10. e.g. C10: "1", D10: "2", E10 "3", F10: "4", G10: "5" etc. (green on the attached sheet). I have my departments along column B, e.g. B11: "Baked" B12: "Fresh" B13: "Frozen" (yellow on the attached sheet)
what I need and cannot work out is some VBA code that will populate two variables (lets call them Period & Department) when I click on one of the figures. For example if I click on cell: if I click E14: Period would have the contents of cell E10, and Department the contents of cell B14.
if i click G14: Period would have the contents of G10, and Department the contents of cell B14 again. I know how to get the click on the cell to work properly etc, and I have code to slot these variables into that works very nicely, I just can't get this bit to work!!!!
I have found this code by searching witch is perfect
Code:
If Target.Cells.Count > 1 Then Exit Sub
Application.ScreenUpdating = False
Cells.Interior.ColorIndex = 0
With Target 'With the cell that was selected,
.EntireRow.Interior.ColorIndex = 8
.EntireColumn.Interior.ColorIndex = 8
End With
Application.ScreenUpdating = True
The point is that i want to retain the previous formatting of cells when i select another cell. And also i would like to create a switch to turn the Worksheet_SelectionChange event on and off. The tricky part is here i guess, becouse i would like when turned off to retain the previous formatting also.