if it is possiable to do a find function to find the lowest value in a colum and then output that entire row. e.g a list of dates, I need to know what is the oldest date and what row that is for reference.
View 9 Replies
I am looking for a formula that will find the lowest 5 number group in column A with a total value from column B under $100 in the below table.
1 $28.75
2 $28.00
3 $27.75
4 $24.75
5 $25.50
6 $25.25
7 $25.25
8 $16.50
9 $24.75
10 $26.50
11 $24.50
12 $27.00
13 $26.50
14 $23.50
15 $23.00
16 $19.25
17 $20.75
18 $25.00
19 $20.50
20 $20.50
21 $17.75
22 $22.50
23 $20.50
24 $19.75
25 $20.00
26 $10.75
27 $11.25
28 $5.25
29 $13.00
30 $9.00
I have been assigned a task of finding the lowest cost of four possible solutions however I have quite an extensive list of items to work with. To make this easier, I need to be able to find the lowest cost in my row (which is not sorted by lowest to highest value) and return the column heading associated with that lowest cost.
View 2 Replies View Relatedi have a table with multiple codes and quantities along with other info in it. What i need is to take each MATERIAL CODE and its lowest quanity and transfer it to another cell. I have tried using DMIN but can not quite get it. It stopped working after the 6th one.
103057300 -800
103057300 -700
103057300 -250
101789050 50
101789050 -70
101789050 -90
So i want to to take the following quanities that are in this font and put them into a separate cell.
i have in the range (Ag1:an1)the names of the months from january- august)in the range (Ag2:An55) ihave numbers in every cell now in every row for example Ag2:An2 i want to find the values less than 50 then i want to write thier month's names in the cells from Ap2:Aw2 i want to do this with every row from row 2 to 55
View 9 Replies View RelatedI have three columns with 1 number in each row. I'm trying to find a number, and if that number does not exist in the 3 columns I would like to find the next smaller number. The numbers have up to 4 decimal places. i.e. 16140.0311.
So for example if a user searches for 15950.012, and that does not exist but 15950.009 does with no numbers in between then the answer returned would be 15950.009. Auto Merged Post Until 24 Hrs Passes;I should probably mention that I would like to insert a new line with the number originally searched for, after the number found.
i.e. search for 15950.012. Not found. 15950.009 next lowest. Insert new line after 15950.009.
I trial tested many another forumla's before posting this.
I'm having a hard time building this simple function see image:
[url]
The formula I need finds the hightest & lowest frequency appears of a number from the index list (index numbers range from 0-9 or if needed changed to 1-50). Along with the hightest/lowest frequency's it needs to also find the second hightest/lowest frequency's i.e.
need result: (9 2) (0 3)
(0 & 3 did not appear so there listed as the lowest frequency's)
index
2 <
2 <
9 <
4
5
6
7
8
9 <
8
7
6
9 <
4
...ect
Im creating a list of cash and carry places to buy drinks but im so clueless on how to go about doing it.
Heres the situation:
In sheet 1 I have a list of Drinks and the prices the shops are selling it for.
I have duplicates of the drinks so say for bacardi i would have one row with one shop with its price and another shop with another price. I cant put it into columns because there is other information such as the quantity the shop sells in one box etc.
On another sheet (sheet2) i have a kind of shopping list. This has all the drinks listed in Sheet 1 as mentioned above but NO DUPLICATES. What i need it to do is find the drink is Sheet 1 and pick the row with the lowest price from the multiple entries and copy that price and shop name over to sheet2.
I hope this is easy to understand. Please let me know if I need to explain some bits again. Im trying my best to figure out how to do this. I have no clue how to do it in Access.
I know this is probably really easy to do but I am new with excel. I have a list of 8 numers in 8 cells and was able to find the lowest. But now I need to take the list and subtract the lowest number from the second lowest and have the difference dispay in the target cell.
View 8 Replies View RelatedIs there a formula I can use to find the Highest and Lowest value in a column?
View 9 Replies View RelatedI am attaching a small sample data set. The first column contains the ID numbers and the second column has the dates. The rest of the columns are some data. When you look at the ID numbers, there will be some common ID Nos. numbers, for example, 300003 (4 in number) but the dates are different for them. What I am going to do is to create a pivot table with the ID Nos and the months. But I want the date to be only the oldest date for example, I want the date for 300003 to be 12/3/2004.
View 6 Replies View RelatedI am looking for a formula that will return the lowest value from a five cell range using letters instead of numbers. If the 5 cell range is empty the cell will remain blank. Not all the 5 cells may be used - it could be anywhere from 1 to all cells.The weightings of the letters in terms of their numerical value are as follows:
F=0
P=1
M=2
D=3
Examples of desired results:
From A1 to A5 the following letters are inputted: P M M D P. Result in A6 = P as P is the lowest numerically in the above list. B1 to B3 = D D M. Result in B4 = M. C1 = F. Result in C2 = F. All cells blank from D1 to D5 = cell in D6 remains blank.
I have a series of numbers in cells B2 to G2. The maximum value of each of these columns is found in B5 to G5. Is there a formula that will calculate the percentage of each of the values in row 2 (B2 to G2) and tell me which is the lowest number based on the percentage? Example...
Row 2: 12, 100, 43, 1444, 141, 332
Row 5: 25, 140, 55, 3000, 244, 440
Which number in row 2, is the lowest percentage of the total possible points found in row 5?
B2 is 45% (12 divided by 25), C2 is 71%, D2 is 78%, E2 is 48%, F2 is 58%, G2 is 75%.
I want a formula to tell me in a new cell that "12" (in B2) is the lowest percentage in that series.
I have 4 grids on the trending tab. I want to find the top 10 highest Color assets from Fleet Volume -Color tab under the correct month.
So for example, if the month is May as in cell G3 on the trending tab, then look at the data under the month of May on the Fleet Volume-Color tab and find the top 10 assets and drop in the City, Address, Model, Serial Number and then volume to the 1st grid on the trending tab, then repeat for Highest B&W
I want to the do the same for each of the other 3 grids on this tab. I want this to update based on the month on both tabs.
Of course, the data on the Fleet Volume tabs is a small range due to size, the data is a lot larger.
Is there are way to do this with a formula? I tried Large and small formula but not too sure how to bring over the other data like City, Model etc.
I've used the below formula to fill column D with the name of the cheapest supplier for the parts listed in each row.
=INDEX($G$1:$M$1,MATCH(MIN(G3:M3),$G3:$M3,0))
Is there a way to fill columns E & F with the 2nd & 3rd cheapest suppliers?
My table is shown below:
Capture.PNG
I have two sheets:
Sheet one has dates, my prices on each of those days, and the fields h1 h2 h3 h4 (h1 is the closest higher number, h2 is the next closet higher number, etc.) and l1 l2 l3 l4 (l1 is the closest lower number, etc. etc.)
Sheet two has certain dates and prices of a competitor's prices.
What I'm trying to do is two things (see attached):
1) find the four closest higher and four closest lower prices (if available)
2) use only the prices that are on or before the date in question.
I've tried combinations like LARGE and OFFSET and so far it is not getting me anywhere.
Can this be done???
I'm holding a Reverse Auction where people pay a dollar to place a bid, BUT the twist is they are giving me a number that they how will be the lowest number but it has to be the only occurrence of that number (greater than 0).
During the party people can guess as much as they want to pay. I think i'll use a spreadsheet with their names in column A and go out in the row with however many cells for how many numbers they guess (so there would be blank cells in the overall range of the whole list if one guy buys 10 numbers and another only 1, for example).
So, i need a cell at the bottom that tells me the lowest number that wasn't guessed more than one time.
I've found how to FIND duplicates and the lowest number but i don't know how to write it so that it discards the duplicates.
I'm trying to pull the lowest amount in one column if the values in 3 separate other columns agree.
View 3 Replies View RelatedI'm using the code described down below to highlight 5 of the lowest values in a column. The problem; If at a certain moment the column contains less then 5 values the code errors, so I've to put in a lot of error handlers to fix the problem.
View 4 Replies View RelatedI have 18 columns of numbers, I need to figure out how to highlight the lowest number in each column, only if it is a unique value... in other words, only if it doesn't match any other number in that column. I'd also like that number somehow paired up with it's row's indentifier and put somewhere in a report.
View 9 Replies View RelatedI need a little macro that will filter for the lowest value in a column
View 5 Replies View RelatedI have an excel with column value as below(sample)
3
4
6
7
empty cell
4
5
3
1
7
empty cell
4
5
empty cell
and more...
Actually i want it to reduce others with lowest number among them.. and after every empty cell, it should find the lowest number again and reduce it from others.. this should repeat until the column data completes. after processing it should find as below
0
1
3
4
empty cell
3
4
2
0
6
empty cell
0
1
empty cell
Any macro or excel formula for processing such a kind of excel. Empty cell works like a delimiter..
Daily Result
14
10
16
10
5
15
8
12
15
9
I have the formula working for the average of the 4 lowest of all, using "AVERAGE" and "SMALL"; need for average of 4 lowest in most recent 7
I need the macro for deleting duplicate rows only it should keep one lowest value row.
for e.g.
Column A Column B
TS1234 100
TS1234 50
TS1234 200
Macro will compair dublicates in column A & it will keep lowest value row (i.e. 50 value in Column B), other dublicate rows will be deleted.
Trying to arrange numerical values in order from lowest to highest in a column i have a code to do that but i need it to be able to but to a range in the column so it only sorts the values in rows 3 - 60 not all of the rows in the column
Sub Testsort()
Range("A3").CurrentRegion.Select
Selection.Sort Key1:=Range("A3"), Order1:=xlAscending, Header:=xlGuess, _
OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _
DataOption1:=xlSortNormal
End Sub
I have imported and filtered a .csv. to specified sheet names. I have rows that have been sorted by a specific column's cell contents. i.e.
A B C C E F G H I
xxx xxxx xxx xxx xxx 1 xxxx xxx xxx
xxx xxxx xxx xxx xxx 1 xxxx xxx xxx
xxx xxxx xxx xxx xxx 2 xxxx xxx xxx
xxx xxxx xxx xxx xxx 2 xxxx xxx xxx
xxx xxxx xxx xxx xxx 2 xxxx xxx xxx
I need to be able to select all the rows or ranges that contain a common value 1's and then loop back and select the next group 2's of rows until the row or column contains "".
need to understand the easiest way of highlighting the highest and lowest number in a range of cells several times in the same column.
As I said the cell range will be in the same column. So highlight the highest number green and lowest number red in cells a3 to a9 and then repeat the same process again in cells a11 to a17 and so on.the cell references are an example.
So I have several separate sets of numbers in the same column.
I need a VBA code to find the nearest biggest number and nearest lowest number between the data of D2 to H2. In the attached file, I have mentioned my required output (Column A and B - blue highlighted)
View 2 Replies View RelatedThere are groups of similar ID numbers in Column J. For a group of similar ID numbers in consecutive rows there is only one row that has a number greater than 0 in its Column L cell and the rest of the cells of Column L for that set of similar IDs is filled with 0s.
First for that unique ID group I need to find out which row is it that has a value greater than zero in its Column L cell.
Then I need to use that value to fill the rest of the 0s in Column L corresponding to that set of Unique IDs.
The process continues with identifying similar IDs in Column J and this time doing the same thing for their Column M. I have attached a sample file that shows the data and how the results need to look like.
I need to combine rows that have the same value in column a and column b to the same row by offsetting column c to the next available column. For example, I would like the first 6 rows of the provided sample to appear like this.
0014B22<@44>Soil Properties and Qualities<@44>Soil Properties and Qualities<@44>Soil Properties and Qualities
0014B23<@28>Coursey<@28>Ogles<@28>Shelocta
Sometimes the values are the same in column c, sometimes they are different. I do not want to delete duplicate rows where they are the same. Sometimes there are 2 rows that have the same values in column a and column b, other times there may be 3 or even 4 rows with the same values in column a and column b. Regardless, I would like the values in column c combined on the same row in the next available column. It would be nice if the duplicate column a and column b rows (with a null column c cell) were then removed, but I could do that in the next step.
0014B22<@44>Soil Properties and Qualities
0014B22<@44>Soil Properties and Qualities
0014B22<@44>Soil Properties and Qualities
0014B23<@28>Coursey
0014B23<@28>Ogles
0014B23<@28>Shelocta
0014B24<@33><i>Available water capacity:<p> High (about 11.5 inches)
0014B24<@33><i>Available water capacity:<p> Very low (about 2.9 inches)
0014B24<@33><i>Available water capacity:<p> High (about 9.0 inches)
0014B25<@33><i>Slowest saturated hydraulic conductivity:<p> Moderately high (about 0.57 in/hr)
0014B25<@33><i>Slowest saturated hydraulic conductivity:<p> High (about 1.98 in/hr)
0014B25<@33><i>Slowest saturated hydraulic conductivity:<p> Moderately high (about 0.57 in/hr)
0014B26<@33><i>Depth class:<p> Very deep (more than 60 inches)
0014B26<@33><i>Depth class:<p> Very deep (more than 60 inches)
0014B26<@33><i>Depth class:<p> Very deep (more than 60 inches)
0014B27<@33><i>Depth to root-restrictive feature:<p> More than 60 inches
0014B27<@33><i>Depth to root-restrictive feature:<p> More than 60 inches..............
